Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Since the [IBM System Storage Technical University 2011] runs concurrently with the System x Technical University, attendees are allowed to mix-and-match. I attended several presentations regarding server virtualization and hypervisors.
Matt Archibald is an IT Management Consultant in IBM's Systems Agenda Delivery team. He started with a history of hypervisors, from IBM's early CP/CMS in 1967, through the latest VMware Vsphere 5 just announced.
He explained that there are three types of Hypervisor architectures today:
Type 1 - often referred to as "Bare Metal" runs directly on the server host hardware, and allows different operating system virtual machines to run as guests. IBM's System z [PR/SM] and [PowerVM] as well as the popular VMware ESXi are examples of this type.
Type 2 - often referred to as "Hosted" runs above an existing operating system, and allows different operating system virtual machines to run as guests. The popular [Oracle/Sun VirtualBox] is an example of this type.
OS Containers - runs above an existing operating system base, and allows multiple "guests" that all run the same operating system as the base. This affords some isolation between applications. [Parallels Virtuozzo Containers] is an example of this type.
The dominant architecture is Type 1. For x86, IBM is the number one reseller of VMware. VMware recently announced [Vsphere 5], which changes its licensing model from CPU-based to memory-based. For example, a virtual machine with 32 virtual CPUs and 1TB of virtual RAM (VRAM) would cost over $73,000 per year to license the VMware "Enterprise Plus" software. The only plus-side to this new licensing is that the "memory" entitlement transfers during Disaster Recovery to the remote location.
"Xen is dead." was the way Matt introduced the section discussing Hybrid Type-1 hypervisors like Xen and Hyper-V. These run bare-metal, but require networking and storage I/O to be processed by a single bottleneck partition referred to as "Dom 0". As such, this hybrid approach does not scale well on larger multi-sock host servers. So, his Xen-is-dead message was referring to all Hybrid-based Hypervisors including Hyper-V, not just those based on Xen itself.
The new up-and-comer is "Linux KVM". Last year, in my blog post about [System x KVM solutions], I mentioned the confusion over KVM acronym used with two different meanings. Many people use KVM to refer to Keyboard-Video-Mouse switches that allow access to multiple machines. IBM has renamed these switches to Local Console Managers (LCM) and Global Console Manager (GCM). This year, the System x team have adopted the use of "Linux KVM" to refer to the second meaning, the [Kernel-based Virtual Machine] hypervisor.
Linux KVM is not a product, but an open-source project. As such, it is built into every Linux kernel. Red Hat has created two specific deliverables under the name Red Hat Enterprise Virtualization (RHEV):
RHEV-H, a tiny ESXi-like bare-metal hypervisor that fits in 78MB, making it small enough to be on a USB stick, CD-rom or memory chip.
RHEV-M, a vCenter-like management software to manage multiple virtual machines across multiple hosts.
Personally, I run RHEL 6.1 with KVM on my IBM laptop as my primary operating system, with a Windows XP guest image to run a few Windows-specific applications.
A complaint of the current RHEV 2.2 release from Linux fanboys is that RHEV-M requires a Windows server, and uses Windows Powershell for scripting. The next release of RHEV is likely to provide a Linux-based option for management server.
Of the various hypervisors evaluated, KVM appears to be poised to offer the best scalability for multi-socket host machines. The next release is expected to support up to 4096 threads, 64TB of RAM, and over 2000 virtual machines. Compare that to VMware Vsphere 5 that supports only 160 threads, 2TB of RAM and up to 512 virtual machines.
Linux KVM Overview
Matt also presented a session focused on Linux KVM. While IBM is the leading reseller of VMware for the x86 server platform, it has chosen Linux KVM to run all of its internal x86 Cloud Computing facilities, as it can offer 40 to 80 percent savings, based on Total Cost of Ownership (TCO).
Linux KVM can run unmodified Windows and Linux guest operating systems as guest images with less than 5 percent overhead. Since KVM is built into the Linux kernel, any certification testing automatically benefits KVM as well. KVM takes advantage of modern CPU extensions like Intel's VT and AMD's AMD-V.
For high availability, in the event that a host fails, KVM can restart the guest images on other KVM hosts. RHEV offers "prioritized restart order" which allows mision-critical images to be started before less important ones.
RHEV also provides "Virtual Desktop Infrastructure", known as VDI. This allows a lightweight client with a browser to access an OS image running on a KVM host. Matt was able to demonstrate this with Firefox browser running on his Android-based Nexus One smartphone.
RHEV also adds features that make it ideal for cloud deployments, including hot-pluggable CPU, network and storage; service Level Agreement monitoring for CPU, memory and I/O resources; storage live migrations to move the raw image files while guests are running; and a self-service user portal.
IBM has been doing server virtualization for decades. When I first started at IBM in 1986, I was doing z/OS development and testing on z/VM guest images. Later, around 1999, I started working with the "Linux on z" team, running multiple Linux images under PR/SM and z/VM. While the server virtualization solutions most people are familiar with (VMware, Hyper-V, Xen) have only been around the last five years or so, IBM has a much deeper and robust understanding and long heritage. This helps to set IBM apart from the competition when helping clients.
(FTC Disclosure: I do not work or have any financial investments in ENC Security Systems. ENC Security Systems did not paid me to mention them on this blog. Their mention in this blog is not an endorsement of either their company or any of their products. Information about EncryptStick was based solely on publicly available information and my own personal experiences. My friends at ENC Security Systems provided me a full-version pre-loaded stick for this review.)
The EncryptStick software comes in two flavors, a free/trial version, and the full/paid version. The free trial version has [limits on capacity and time] but provides enough glimpse of the product to decide before you buy the full version. You can download the software yourself and put in on your own USB device, or purchase the pre-loaded stick that comes with the full-version license.
Whichever you choose, the EncryptStick offers three nice protection features:
Encryption for data organized in "storage vaults", which can be either on the stick itself, or on any other machine the stick is connected to. That is a nice feature, because you are not limited to the capacity of the USB stick.
Encrypted password list for all your websites and programs.
A secure browser, that prevents any key-logging or malware that might be on the host Windows machine.
I have tried out all three functions and everything works as advertised. However, there is always room for improvement, so here are my suggestions.
The first problem is that the pre-loaded stick looks like it is worth a million dollars. It is in a shiny bronze color with "EncryptStick" emblazoned on it. This is NOT subtle advertising! This 8GB capacity stick looks like it would be worth stealing solely on being a nice piece of jewelry, and then the added bonus that there might be "valuable secrets" just makes that possibility even more likely.
If you want to keep your information secure, it would help to have "plausible deniability" that there is nothing of value on a stick. Either have some corporate logo on it, of have the stick look like a cute animal, like these pig or chicken USB sticks.
It reminds me how the first Apple iPod's were in bright [Mug-me White]. I use black headphones with my black iPod to avoid this problem.
Of course, you can always install the downloadable version of EncryptStick software onto a less conspicuous stick if you are concerned about theft. The full/paid version of EncryptStick offers an option for "lost key recovery" which would allow you to backup the contents of the stick and be able to retrieve them on a newly purchased stick in the event your first one is lost or stolen.
Imagine how "unlucky" I felt when I notice that I had lost my "rabbits feet" on this cute animal-themed USB stick.
I sense trouble for losing the cap on my EncryptStick as well. This might seem trivial, but is a pet-peeve of mine that USB sticks should plan for this. Not only is there nothing to keep the cap on (it slides on and off quite smoothly), but there is no loop to attach the cap to anything if you wanted to.
Since then, I got smart and try to look for ways to keep the cap connected. Some designs, like this IBM-logoed stick shown above, just rotate around an axle, giving you access when you need it, and protection when it is folded closed.
Alternatively, get a little chain that allows you to attach the cap to the main stick. In the case of the pig and chicken, the memory section had a hole pre-drilled and a chain to put through it. I drilled an extra hole in the cap section of each USB stick, and connected the chain through both pieces.
(Warning: Kids, be sure to ask for assistance from your parents before using any power tools on small plastic objects.)
The EncryptStick can run on either Microsoft Windows or Mac OS. The instructions indicate that you can install both versions of download software onto a single stick, so why not do that for the pre-loaded full version? The stick I have had only the Windows version pre-loaded. I don't know if the Windows and Mac OS versions can unlock the same "storage vaults" on the stick.
Certainly, I have been to many companies where either everyone runs Windows or everyone runs Mac OS. If the primary target audience is to use this stick at work in one of those places, then no changes are required. However, at IBM, we have employees using Windows, Mac OS and Linux. In my case, I have all three! Ideally, I would like a version of EncryptStick that I could take on trips with me that would allow me to use it regardless of the Operating System I encountered.
Since there isn't a Linux-version of EncryptStick software, I decided to modify my stick to support booting Linux. I am finding more and more Linux kiosks when I travel, especially at airports and high-traffic locations, so having a stick that works both in Windows or Linux would be useful. Here are some suggestions if you want to try this at home:
Use fdisk to change the FAT32 partition type from "b" to "c". Apparently, Grub2 requires type "c", but the pre-loaded EncryptStick was set to "b". The Windows version of EncryptStick> seems to work fine in either mode, so this is a harmless change.
Install Grub2 with "grub-install" from a working Linux system.
Once Grub2 is installed, you can boot ISO images of various Linux Rescue CDs, like [PartedMagic] which includes the open-source [TrueCrypt] encryption software that you could use for Linux purposes.
This USB stick could also be used to help repair a damaged or compromised Windows system. Consider installing [Ophcrack] or [Avira].
Certainly, 8GB is big enough to run a full Linux distribution. The latest 32-bit version of [Ubuntu] could run on any 32-bit or 64-bit Intel or AMD x86 machine, and have enough room to store an [encrypted home directory].
Since the stick is formatted FAT32, you should be able to run your original Windows or Mac OS version of EncryptStick with these changes.
Depending on where you are, you may not have the luxury to reboot a system from the USB memory stick. Certainly, this may require changes to the boot sequence in the BIOS and/or hitting the right keys at the right time during the boot sequence. I have been to some "Internet Cafes" that frown on this, or have blocked this altogether, forcing you to boot only from the hard drive.
Well, those are my suggestions. Whether you go on a trip with or without your laptop, it can't hurt to take this EncryptStick along. If you get a virus on your laptop, or have your laptop stolen, then it could be handy to have around. If you don't bring your laptop, you can use this at Internet cafes, hotel business centers, libraries, or other places where public computers are available.
This week, IBM celebrates its Centennial, 100 years since its incorporation on June 16, 1911.
A few months ago, the Tucson Executive Briefing Center ordered its latest IBM System Storage [DS8800] to be on display for demos. This was manufactured in Vác, Hungary (about an hour north of Budapest), and was going to be shipped over to the United States.
However, Sam Palmisano, IBM Chairman and CEO, was in Hannover, Germany for the [CeBIT conference] and wanted this DS8800 to be re-directed to Germany first for this event. He was kind enough to sign it for us. Brian Truskowski, IBM General Manager for Storage, and Rod Adkins, IBM Senior Vice President for IBM Systems Technolgoy Group (and my fifth-line manager), also signed this as well!
I am pleased to say this "signed" DS8000 has arrived to Tucson. This is the latest model in a family of market-leading high-end enterprise-class disk systems designed to attach to all computers, including System z mainframes, POWER systems running AIX and IBM i, as well as servers running HP-UX, Solaris, Linux or Windows.
For more on IBM's other innovations over the past 100 years, check out the [Icons of Progress], which includes these storage innovations:
IBM announced that it will offer [three free months of IBM Smart Business Cloud] computing and storage services to government agencies, charitable non-profit organizations, and other organizations involved with reconstruction resulting from the earthquakes and tsunami in Japan and the northern Pacific region.
With traditional communications down, and many data centers incapacitated, Cloud Computing can be a great way to resume operations. According to the announcement, organizations can submit their requests now until April 30, and the program will run until July 31, 2011. Options include:
Virtual machine images running 32-bit and 64-bit versions of Linux or Windows.
60GB to 2 TB of disk storage per instance.
Options for various IBM middleware (DB2, Informix, Lotus, and WebSphere)
Rational Application Lifecycle Management and Tivoli Monitoring software
The offer also includes [LotusLive] Software-as-a-Service (SaaS) for email and online collaboration. For more about LotusLive, see this [Red Paper].
It's Tuesday again, and that means one thing.... IBM Announcements! On the heels of [last week's announcements], IBM announced some additional products of interest to storage administrators.
IBM Information Archive
Back in 2008, IBM [unveiled the Information Archive]. This storage solution provides automated policy-based tiering between disk and tape, with non-erasable non-rewriteable enforcement to protect against unethical tampering of data. The initial release supported [both files and object storage], with support for different collections, each with its own set of policies for management. However, it only supported NFS initially for the file protocol. Today, IBM announces the addition of CIFS protocol support, which will be especially helpful in healthcare and life sciences, as much of the medical equipment is designed for CIFS protocol storage.
Also, Information Archive will now provide a full index and search feature capability to help with e-Discovery. Searches and retrievals can be done in the background without disrupting applications or the archiving operations.
IBM Tivoli Storage Manager for Virtual Environments V6.2 extends capabilities that currently exist in IBM Tivoli Storage Manager. TSM backup/archive clients run fine on guest operating systems, but now this new extension improves backup for VMware environments. TSM provides incremental block-level backups utilizing VMware's vStorage APIs for Data Protection and Changed Block Tracking features.
To minimize impact to the VMware host, TSM for VE make use of non-disruptive snapshots and offload the backup processing to a vStorage backup server. This supports file-level recovery, volume-level recovery, and full VM recovery. Of course, since it is based on TSM v6, you get advanced storage efficiency features such as compression and deduplication to minimize consumption of disk storage pools.
IBM Tivoli Monitor has been extended to support virtual servers, including VMware, Linux KVM, and Citrix XenServer. This can help with capacity planning, performance monitoring, and availability. Tivoli Monitor will help you understand the relationships between physical and virtual resources to help isolate problems to the correct resource, reducing the time it takes for debug issues between servers and storage. See the
Next week is [IBM Pulse2011 Conference] in Las Vegas, February 27 to March 2. Sorry, I don't plan to be there this year. It is looking to be a great conference, with fellow inventor Dean Kamen as the keynote speaker. For a blast from the past, read my blog posts from Pulse2008 [Main Tent sessions] and [Breakout sessions].