Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Despite this, or perhaps because of this, over 30 percent of IBM's Linux server revenue is onnon-x86 platforms, avoiding the XenSource vs. VMware decision altogether. Both System z (traditional mainframe servers) and System p (traditional UNIX servers) are able to run many Linux images in a fully virtualized manner, without VMware or XenSource.
The IBM Storage and Storage Networking Symposium concludes today. As typical for manysuch conferences, it ended at noon, so that people can catch airline flights.
TS1120 Tape Encryption - Customer Experiences
Jonathan Barney had implemented many deployments of tape encryption, and shared hisexperiences at two customer locations.
The first company had decided to implement their EKM servers on dedicated 64-bitWindows servers. They had three sites, one in Chicago, Alphareta, and New York City,each with two EKM servers. Each library had a single TS3500 tape library, and pointedto four EKM servers, two local, and two remote.
The clever trick was managing the keystore. They decided that EKM-1 was their trustedsource, made all changes to that, and then copied it to the other five EKM servers.His team deployed one site at a time, which turned out to be ok, but he would notrecommend it. Better to design your complete solution, and make sure that all librariescan access all EKM servers.
This company decided to have a single key-label/key-pair for all three locations, but change it every 6 months. You have to keep the old keys for as long as you have tapesencrypted with those keys, perhaps 10-20 years.The customer found the IBM encryption implementation "elegant" and it can be easily replicated to a fourth site if needed.
The second company had both z/OS and Sun Solaris. Initially they planned to have botha hardware-based keystore on System z, and software-based keystore on Sun, but they realized that System z version was so much more secure and reliable, that it made nosense to have anything on the Sun Solaris platform.
On System z, they had two EKM images, and used VIPA to ensure load balancing fromthe library. Tapes written from z/OS used DFSMS Data Class to determine which tapesare encrypted and which aren't. All Tapes written from Sun Solaris were encryptied, written to a separate logical library partition of the TS3500, which in turn contactedthe System z for the EKM management to provide the keys to use for the encryption.
The "gotcha" for this case was that when they tested Disaster Recovery, they had torecover the two EKM servers first, before any other restores could take place, and thistook way too long. Instead, they developed a scaled-down 10-volume "rescue recovery" z/OS image that would contain the RACF database and all EKM related software to actas the keystore during a disaster recovery. Anytime they make updates, they only haveto dump 10 volumes to tape. Restore time is down to only 2 hours.
He gave this advice to deploy tape encryption:
Some third party z/OS security products, like Computer Associates Top Secret orACF2, require some PTFs to work with the EKM. The latest IBM RACF is good to go.
Getting IP support from IOS to OMVS requires IPL.
At one customer, an OMVS monitor software program killed the EKM because it wasn'tin their list of "acceptable Java programs". They updated the list and EKM ran fine.
DO not update EKM properties file while EKM is running. EKM keeps a lot of stuffin memory, and when it is recycled, copies this back to the EKM properties file, reversing any changes you may have done. It is best to shut down EKM, update theproperties file, then start up EKM back up again. This is why you should always haveat least two EKM servers for redundancy.
TSM for Linux on System z
Randy Larson from our Tivoli group presented this session.There is a lot of interest in deploying IBM Tivoli Storage Manager backup and archivesoftware on Linux for System z. Many customers are already invested in a mainframeinfrastructure, may have TSM for z/OS or z/VM, and want the newer features and functions that are available for TSM on Linux.
TSM has special support for Lotus Domino, Oracle, DB2 and WebSphere Application Servers.TSM clients can send backup data to a TSM server internally via Hipersockets, a virtualLAN feature on the System z platform that uses shared memory to emulate TCP/IP stack.
One of the big questions is whether to run Linux as guests under z/VM, or natively onLPAR. The general deployment is to carve an LPAR and run Linux natively untilyour server and storage administration staff have taken z/VM training classes. Oncetrained, they can easily move native LPAR images to z/VM guests. Unlike VMware that takesa hefty 40% overhead on x86 platforms to manage guests, z/VM only takes 5-10% overhead.
For the TSM database and disk storage pools, Randy recommends FC/SCSI disk, with ext3 file system, combined with LVM2 into logical volumes. ECKD disk and reiserfsworks too. Avoid use of z/VM minidisks. Under LVM2, consider 32KB stripes for the TSM database, and 256KB stripes for the disk storage pools. For multipathing, usefailover rather than multibus method. Read IC45459 before you activate "directio".
The TSM for Linux on z is very much like the TSM on AIX or Windows, and not like theTSM for z/OS. For tape, TSM for Linux on z does not support ESCON/FICON attached tape,you need to use FC/SCSI attached tape and tape libraries. TSM owns the library anddrives it uses, so give it a logical library partition separate from z/OS. ForSun/StorageTek customers, TSM works with or without the Gersham Enterprise Distrbu-Tape(EDT) software. Use the IBM-provided drivers for IBM tape. For non-IBM tape, TSM providessome drivers that you can use instead.
That wraps up my week. This was a great conference! If you missed it, look for the one in Montpelier, France this October. Check out the list of IBM Technical Conferencesto find others that might interest you.
In his blog Rough Type, Nick Carr asks Where is my CloudBook?and points to John Markoff's 2-part series in the New York Times on computing in the clouds.(Read it here: Part 1, Part 2)
At first, I thought he meant computing while in an airplane, but instead, he is talking about computing on a laptop or other hand-held device that does not have an internal disk drive, no installedoperating system, no internal data storage. Instead, the idea is that you boot from a CD, accessyour data, and even some of your programs, over the internet. John used an Ubuntu Linux LiveCD in his example.
This week, I am in Sao Paulo, Brazil, and was "in the clouds" for over 10 hours flying from Dallas to here.The one time I am guaranteed "off-line" from the internet is on the plane, and I spend enough time on planesthat I am able to get work done despite being "disconnected".
The same reasons people want to get out of having a disk drive on their laptop, are the reasons data centersare getting out of internal disk on their servers.
disks crash, and typically are not protected in any RAID configuration on most laptops
operating systems get infected with viruses and malware
storage on one server is generally inaccessible to every other server
Booting from CD is especially clever. No more worrying about fixing your Windows registry, viruses,corrupted operating system files, or the cruft that accumulates on your C: drive that slowsyou down. The CD is the sameevery time, so it is like running your system with a freshly installed operating system every day.
The need for central repositories of data harkens back to the years of the IBM mainframe. Of course, whatmade sense back then continues to make sense now. The old 3270 terminals stored no data, and instead merelyprovided keyboard input and display text screen output to the vast amount of data stored on the central system.Today, the inputs are different, using your finger or mouse instead to point to what you want, sliding itacross to make things happen, and the output may now include photos, audio and video, but the concept isstill the same.
I carry my Ubuntu Linux LiveCD with me on every business trip. Combined with externally rewriteable media,such as a USB key, you can get work done even when you are in an airplane, and upload it whenyou are back on the net.
I can't believe I have been blogging for a year now!
I have Jennifer Jones from IBM to thank for getting this started. She was my predecessor in the job I have now, and she was moving on to bigger and better things, and during the transition for me to take over, she suggested that we start a blog, podcast, or similar. While there are many blogs and podcasts inside the firewall of IBM, I wanted something to be accessible to all of our IBM sales team, IBM Business Partners, existing and prospective clients, and to enable comments, to enable two-waycommunication. Podcasts are very one-way, so we chose a blog instead.Getting it set up took a while, convincing our own management that this was worthwhile, and dealing with our legal department on the IBM blogging guidelines of what we can and cannot write about, we finally got it going last year, launching September 1, just in time for our 50 years of disk systems innovation campaign.
It has been a wild ride, a great learning experience, and has proven quite fulfilling for job satisfaction. Here are some observations and lessons I have learned along the way.
Roller is the open source blog server that drives Sun Microsystem's blogs.sun.com employee blogging site, IBM DeveloperWorks blogs that this blog exists on, thousands of internal blogs at IBM Blog Central, the JRoller Java community site, and hundreds of others world-wide.Whereas there might be fancier blog systems elsewhere that I could have chosen, hosting my blog with IBM Developerworksseemed like a good choice. I can access from any web-browser capable machine, and enter my blog posts in nativeHTML, that I develop in the tool itself, or offline with a standard basic text editor like Microsoft Notepad that I can then cut-and-paste back in.
One lesson I learned the hard way was that Roller generates the Permalink URL for each blog post based on the first five words of the title. For that reason, it is important to chose an appropriate and unique title, avoiding the use of punctuation, quotation marks, or pharmaceutical "enhancement products" that might get rejected by SPAM filters.Once chosen, you can't change the title afterwards as it won't match the Permalink anymore.My blog post "Aperi is (enhancement product) for SMI-S" caused no end of grief to our Press Release team.
Writing blog posts in native HTML is not as hard as it sounds. I am limited to hosting a maximum of 24MB of files, and they can only be jpg, jpeg, gif, png, mp3, pdf or ppt format.So, wherever possible, I point to other websites for content.For those new to blogging, I recommendThe Barebones Guide to HTML.
Roller also generates for me a spreadsheet of all my page views for the week. Tracking blog traffic closely is as crazyas checking your company's stock price every day. These "web-stat" e-mails get filed directly into my Bacn folder on Lotus Notes.
In my earlyadvice to bloggers, I mentioned my choice of Bloglines as my RSS feed reader. When I subscribe to a new blog, I specify Full entries, not Partial,which allows me to scan it quickly, but filters out many of the non-text content like videos. It also allowed meto see what my own blog posts looked like from within a reader, so that I can write them appropriately.
I find if valuable to read other blogs, including those written by employees of our toughest competitors. Evenif you don't blog yourself, following blogs can be extremely valuable. Be careful what you leave as comments onother blogs, they may come back to haunt you later.
Currently, I track 55 blogs, some about storage,marketing, Web 2.0 issues, Second Life, Linux, or other areas of interest. I prefer blogs that make only 1-5 postsper week, so blogs like LifeHacker and LifeRemix are off my Bloglines list, but are excellent resourceswhen I am searching for something specific. If you think 55 is a lot of blogs, consider Timothy Ferriss' post onHow RobertScoble reads 622 RSS feeds each morning.
I have quite an international readership, so I have to be careful using American idioms and pop cultural references.For example, in my blog post IBM acquires Softek, I mentioned "shotgun weddings" and had various responses asking what exactly did that mean,all from readers outside the USA. I've learned that sometimes you need to link them to an American Slang dictionary,or Wikipedia encyclopedia entry to explain these terms and phrases.
Technoraticurrently tracks over 100 million blogs and over 250 million pieces of tagged social media. Getting my blogtracked had some issues. You have to join, thenpost a "claim"on your own blog. My mistake was having a case-sensitive URL with a mix of upper and lower case letters, but Technorati prefers all lower case. IBM worked with Technorati to get this resolved.
Del.icio.us is a social bookmarking website -- the primary use is to store your bookmarks online, which allows you to access the same bookmarks from any computer and add bookmarks from anywhere, too. On del.icio.us, you can use tags to organize and remember your bookmarks, which is a much more flexible system than folders.
I use Firefox, Safari, Dillo and Internet Explorer web browsers, so it is nice that I have access to allmy bookmarks in the same consistent manner. When I see content on a website that I might like to reference laterin a blog, I tag it with del.icio.us so that I can get to it later.
Fellow GTD-ers will quickly recognize this acronym, but for the rest of you, it refers to David Allen's book "Getting Things Done®".This is a great book! I learned about it reading other people's blogs, and found it incrediblyuseful helping me organize my time.There are various online tools available to help employ this method. I use Lotus Connections Activitiesfor group projects with co-workers at IBM, and BackPack for projects withmy friends outside of work.
The success of YouTube encouraged IBM to launch IBM TV, a portal for IBM's video and multimedia assets and make it easier for IBM employees, customers, partners and prospects to access and view IBM multimedia. The plan is to have eight anchor episodes per year, professionally hosted by TV personality, Joe Washington, and point to related offers and other resources for viewers to learn more.
Blogging also introduced me to Second Life. I asked around if anyone else within IBM was using Second Life, anddiscovered quite a few. I got invited to join our internal Eightbar group, and participated in various events, including an IBM Holidayparty that I discussed in my blog post"Building a Snowman in Second Life".
In April, we had a launch of our newest products in Second Life, and we plan to have two more Second Life events,September 20 and another in November, staged as "Meet the Experts" question and answer panels.
I wrap up with Facebook. Actually, whereas most of my Web 2.0 efforts have been work-related, I have quite a few friends and family who follow my blog. Several were inspired to start their own blogs, such asPassages from Pamand Barry Whyte on Storage Virtualization. Bridging the gap is Facebook, something I can use to keep tabs on my friends, as well as my storage industry-related contacts.
Wow, that's quite a lot in one year. Well, I am done with my meetings down here in Sao Paulo, Brazil. My colleauges and I are returning tonight to enjoy the long Labor Day weekend.
[R&D Magazine] recently conducted a survey that prompted readers to identify the world's most successful Research and Development (R&D) companies. The results are in: IBM was recognized as the best R&D company in the world when several different categories were evaluated, including:
R&D spending as a percentage of revenue
the number of patents
new products in development
The survey considered additional information on more than 130 companies such as data on intellectual property, community service and financial growth trends. Readers were also asked five distinct questions, including the following:
Where would you like to work based on their R&D?
What companies have the most improved R&D in the past five years?
What companies are the leaders in R&D?
Which company's R&D has the strongest influence on society?
Which company's R&D is the most proactive in high tech challenges?
Since it is often 5-15 years between when a scientist in one of our many research labs comes up with a clever idea, to when it is a market success, it is good to have external recognition for the R&D efforts we are doing right now.Here is a link to a [four-page PDF] of the magazine article.
Take for example IBM's recent breakthrough in Silicon photonics. Supercomputers that consist of thousands of individual processing nodes, typically running Linux on dual-core or quad-core processors, connected by miles of copper wires could one day fit into a laptop PC. And while today’s supercomputers can use the equivalent energy required to power hundreds of homes, these future tiny supercomputers-on-a-chip would expend the energy of a light bulb, so this solution is more "green" for the environment.According to the [IBM Press Release]:
The breakthrough -- known in the industry as a silicon Mach-Zehnder electro-optic modulator -- performs the function of converting electrical signals into pulses of light. The IBM modulator is 100 to 1,000 times smaller in size compared to previously demonstrated modulators of its kind, paving the way for many such devices and eventually complete optical routing networks to be integrated onto a single chip. This could significantly reduce cost, energy and heat while increasing communications bandwidth between the cores more than a hundred times over wired chips.
“Work is underway within IBM and in the industry to pack many more computing cores on a single chip, but today’s on-chip communications technology would overheat and be far too slow to handle that increase in workload,” said Dr. T.C. Chen, vice president, Science and Technology, IBM Research. “What we have done is a significant step toward building a vastly smaller and more power-efficient way to connect those cores, in a way that nobody has done before.”
Today, one of the most advanced chips in the world -- IBM’s Cell processor which powers the Sony Playstation 3 -- contains nine cores on a single chip. The new technology aims to enable a power-efficient method to connect hundreds or thousands of cores together on a tiny chip by eliminating the wires required to connect them. Using light instead of wires to send information between the cores can be 100 times faster and use 10 times less power than wires.