Well, it's Tuesday again, but this time, today we had our third big storage launch of 2009! A lot got announced today as part of IBM's big "Dynamic Infrastructure" marketing campaign. I will just focus on the
disk-related announcements today:
- IBM System Storage DS8700
IBM adds a new model to its DS8000 series with the
[IBM System Storage DS8700]. Earlier this month, fellow blogger and arch-nemesis Barry Burke from EMC posted [R.I.P DS8300] on this mistaken assumption that the new DS8700 meant that DS8300 was going away, or that anyone who bought a DS8300 recently would be out of luck. Obviously, I could not respond until today's announcement, as the last thing I want to do is lose my job disclosing confidential information. BarryB is wrong on both counts:
- IBM will continue to sell the DS8100 and DS8300, in addition to the new DS8700.
- Clients can upgrade their existing DS8100 or DS8300 systems to DS8700.
BarryB's latest post [What's In a Name - DS8700] is fair game, given all the fun and ridicule everyone had at his expense over EMC's "V-Max" name.
So the DS8700 is new hardware with only 4 percent new software. On the hardware side, it uses faster POWER6 processors instead of POWER5+, has faster PCI-e buses instead of the RIO-G loops, and faster four-port device adapters (DAs) for added bandwidth between cache and drives. The DS8700 can be ordered as a single-frame dual 2-way that supports up to 128 drives and 128GB of cache, or as a dual 4-way, consisting of one primary frame, and up to four expansion frames, with up to 384GB of cache and 1024 drives.
Not mentioned explicitly in the announcements were the things the DS8700 does not support:
- ESCON attachment - Now that FICON is well-established for the mainframe market, there is no need to support the slower, bulkier ESCON options. This greatly reduced testing effort. The 2-way DS8700 can support up to 16 four-port FICON/FCP host adapters, and the 4-way can support up to 32 host adapters, for a maximum of 128 ports. The FICON/FCP host adapter ports can auto-negotiate between 4Gbps, 2Gbps and 1Gbps as needed.
- LPAR mode - When IBM and HDS introduced LPAR mode back in 2004, it sounded like a great idea the engineers came up with. Most other major vendors followed our lead to offer similar "partitioning". However, it turned out to be what we call in the storage biz a "selling apple" not a "buying apple". In other words, something the salesman can offer as a differentiating feature, but that few clients actually use. It turned out that supporting both LPAR and non-LPAR modes merely doubled the testing effort, so IBM got rid of it for the DS8700.
Update: I have been reminded that both IBM and HDS delivered LPAR mode within a month of each other back in 2004, so it was wrong for me to imply that HDS followed IBM's lead when obviously development happened in both companies for the most part concurrently prior to that. EMC was late to the "partition" party, but who's keeping track?
Initial performance tests show up to 50 percent improvement for random workloads, and up to 150 percent improvement for sequential workloads, and up to 60 percent improvement in background data movement for FlashCopy functions. The results varied slightly between Fixed Block (FB) LUNs and Count-Key-Data (CKD) volumes, and I hope to see some SPC-1 and SPC-2 benchmark numbers published soon.
The DS8700 is compatible for Metro Mirror, Global Mirror, and Metro/Global Mirror with the rest of the DS8000 series, as well as the ESS model 750, ESS model 800 and DS6000 series.
- New 600GB FC and FDE drives
IBM now offers [600GB drives] for the DS4700 and DS5020 disk systems, as well as the EXP520 and EXP810 expansion drawers. In each case, we are able to pack up to 16 drives into a 3U enclosure.
Personally, I think the DS5020 should have been given a DS4xxx designation, as it resembles the DS4700
more than the other models of the DS5000 series. Back in 2006-2007, I was the marketing strategist for IBM System Storage product line, and part of my job involved all of the meetings to name or rename products. Mostly I gave reasons why products should NOT be renamed, and why it was important to name the products correctly at the beginning.
- IBM System Storage SAN Volume Controller hardware and software
Fellow IBM master inventory Barry Whyte has been covering the latest on the [SVC 2145-CF8 hardware]. IBM put out a press release last week on this, and today is the formal announcement with prices and details. Barry's latest post
[SVC CF8 hardware and SSD in depth] covers just part of the entire
The other part of the announcement was the [SVC 5.1 software] which can be loaded
on earlier SVC models 8F2, 8F4, and 8G4 to gain better performance and functionality.
To avoid confusion on what is hardware machine type/model (2145-CF8 or 2145-8A4) and what is software program (5639-VC5 or 5639-VW2), IBM has introduced two new [Solution Offering Identifiers]:
- 5465-028 Standard SAN Volume Controller
- 5465-029 Entry Edition SAN Volume Controller
The latter is designed for smaller deployments, supports only a single SVC node-pair managing up to
150 disk drives, available in Raven Black or Flamingo Pink.
- EXN3000 and EXP5060 Expansion Drawers
IBM offers the [EXN3000 for the IBM N series]. These expansion drawers can pack 24 drives in a 4U enclosure. The drives can either be all-SAS, or all-SATA, supporting 300GB, 450GB, 500GB and 1TB size capacity drives.
The [EXP5060 for the IBM DS5000 series] is a high-density expansion drawer that can pack up to 60 drives into a 4U enclosure. A DS5100 or DS5300
can handle up to eight of these expansion drawers, for a total of 480 drives.
- IBM System Storage Productivity Center v1.4
The latest [System Storage Productivity Center (SSPC) v1.4] can manage all of your DS3000, DS4000, DS5000, DS6000, DS8000 series disk, and SAN Volume Controller. You can get the SSPC built in two modes:
- Pre-installed with Tivoli Storage Productivity Center Basic Edition. Basic Edition can be upgraded with license keys to support Data, Disk and Standard Edition to extend support and functionality to report and manage XIV, N series, and non-IBM disk systems.
- Pre-installed with Tivoli Key Lifecycle Manager (TKLM). This can be used to manage the Full Disk Encryption (FDE) encryption-capable disk drives in the DS8000 and DS5000, as well as LTO and TS1100 series tape drives.
- IBM Tivoli Storage FlashCopy Manager v2.1
The [IBM Tivoli Storage FlashCopy Manager V2.1] replaces two products in one. IBM used
to offer IBM Tivoli Storage Manager for Copy Services (TSM for CS) that protected Windows application data, and IBM Tivoli Storage Manager for Advanced Copy Services (TSM for ACS) that protected AIX application data.
The new product has some excellent advantages. FlashCopy Manager offers application-aware backup of LUNs containing SAP, Oracle, DB2, SQL server and Microsoft Exchange data. It can support IBM DS8000, SVC and XIV point-in-time copy functions, as well as the Volume Shadow Copy Services (VSS) interfaces of the IBM DS5000, DS4000 and DS3000 series disk systems. It is priced by the amount of TB you copy, not on the speed or number of CPU processors inside the server.
Don't let the name fool you. IBM FlashCopy Manager does not require that you use Tivoli Storage Manager (TSM) as your backup product. You can run IBM FlashCopy Manager on its own, and it will manage your FlashCopy target versions on disk, and these can be backed up to tape or another disk using any backup product. However, if you are lucky enough to also be using TSM, then there is optional integration that allows TSM to manage the target copies, move them to tape, inventory them in its DB2 database, and provide complete reporting.
Yup, that's a lot to announce in one day. And this was just the disk-related portion of the launch!
technorati tags: ds8000, disk, ds8700, exn3, svc, cf8, 2145-c58, DS5000, DS4000, DS3000, DS5020, DS4700, DS5100, DS5300, SSPC, TKLM, FlashCopy+Manager, Tivoli, Storage+Manager, TSM, DB2, Oracle, SAP, SQL, Microsoft+Exchange, VSS, Windows, AIX, N+series, XIV
Has EMC stooped so low that they have to resort to Hitachi math for their latest performance claims?
Readers might remember that just a few months ago, I had a blog post [Is this what HDS tells our mainframe clients?] pointing out the outlandish comparison Hitachi was using in their presentations. Their response was to cover it up, forcing me to follow up with my post [The Cover-up is worse than the original crime]. To their credit, they eventually removed the false and misleading information from their materials.
Now an avid reader of my blog has brought this to my attention. Apparently,
EMC has been showing customers a presentation
[Accelerating Storage Transformation with VMAX and VPLEX] with false and misleading comparison claims between IBM DS8000, HDS VSP and EMC VMAX 40K disk system performance.
(FTC Disclosure: This would be a good time to remind my readers that I work for IBM and own IBM stock. I do not endorse any of the EMC or HDS products mentioned in this post, and have no financial affiliation or investments directly with either EMC nor HDS. I am basing my information solely on the presentation posted on the internet and other sources publicly available, and not on any misrepresentations from EMC speakers at the various conferences where these charts might have been shown.)
The problem with misinformation is that it is not always obvious. The EMC presentation is quite pretty and professional-looking. It is the typical slick, attention-getting, low-content, over-simplified marketing puffery you have come to expect from EMC. There are two slides in particular that I have issue with.
This first graphic implies that IBM and HDS are nearly tied in performance, but that EMC VMAX 40K has nearly triple that bandwidth. Overall the slide has very little detail. That makes it difficult to determine what exactly is being claimed and whether a fair comparison is being made.
- The title claims that VMAX 40K is "#1 in High Bandwidth Apps". Only three disk systems are shown so the claim appears to be relative to only the three systems. The wording "High Bandwidth Apps" is confusing considering the cited numbers are for disk systems and no application is identified. By comparison, IBM SONAS can drive up to 105 GB/sec sequential bandwidth, nearly double what EMC claims for its VMAX 40K, so EMC is certainly not even close to #1.
- Is the workload random or sequential? That is not easy to determine. The use of "GB/s" along with the large block size of 128KB implies the I/O workload is sequential, which is great for some workloads like high performance computing, technical computing and video broadcasts. Random workloads, on the other hand, are usually measured in I/Os per second (IOPS) with a block size ranging 4KB to 64KB. (I am assuming the 128K blocks refers to 128KB block size, and not reading the same block of cache 128,000 times.)
- The slide states "Maximum Sustainable RRH Bandwidth 128K Blocks". The acronym "RRH" is not defined; but I suspect this refers to "random read hits". For random workloads, 100 percent random read hits from cache represents one corner of the infamous "four corners" test. Real-world workloads have a mix of reads and writes, and a mix of cache hits and cache misses. It is also unclear whether the hits are from standard data cache or from internal buffers in adapters (perhaps accessing the same blocks repeatedly) or something else. So is this really for a random workload, or a sequential workload?
(The term "Hitachi Math" was coined by an EMC blogger precisely to slam Hitachi Data Systems for their blatant use of four-corners results, claiming that spouting ridiculously large, but equally unrealistic, 100 percent random read hit results don't provide any useful information. I agree. There are much better industry-standard benchmarks available, such as SPC-1 for random workloads, SPC-2 for sequential workloads, and even benchmarks for specific applications, that represent real-world IT environments. To shame HDS for their use of four-corners results, only for EMC themselves to use similar figures in their own presentation is truly hypocritical of them!)
- The IBM system is identified as "DS8000". DS8000 is a generic family name that applies to multiple generations of systems first introduced in 2004. The specific model is not identified, but that is critical information. Is this a first generation DS8100, or the latest DS8800, or something in between?
The slide says "Full System Configs", but that is not defined and configuration details are not identified. Configuration details, also critical information in assessing system performance capabilities, are not specified. If the EMC box costs seven times more than IBM or HDS, would you really buy it to get 3x more performance? Is the EMC packed with the maximum amount of SSD? Were there any SSD in the IBM or HDS boxes to match?
The source of the claimed IBM DS8000 performance numbers is not identified. Did they run their own tests? While I cannot tell, the VMAX may have been configured with 64 Fibre Channel 8Gbps host connections. In that case each channel is theoretically capable of supporting about 800 MB/s at 100% channel utilization. Multiplying 64 x 800MB/s = 51.2GB/s, so did EMC just do the performance comparison on the back of a napkin, assuming there are no other bottlenecks in the system? Even then, I would not round up 51.2 to 52!
- Response times were not identified. For random I/Os, response time is a very important metric. It is possible that the Symmetrix was operating with some resources at 100% utilization to get the highest GB/s result, but that would likely make I/O response times unacceptable for real-world random I/O workloads.
IBM and HDS have both published Storage Performance Council [SPC] industry-standard performance benchmarks. EMC has not published any SPC benchmarks for VMAX systems. If EMC is interested in providing customers with audited, detailed performance information along with detailed configuration information, all based on benchmarks designed to represent real-world workloads, EMC can always publish SPC benchmark results as IBM and other vendors have done. In past blog fights, EMC resorts to the excuse that SPC isn't perfect, but can they really argue that vague and unrealistic claims cited in its presentation are better?
The second graphic is so absurd, you would think it came directly from Larry Ellison at an Oracle OpenWorld keynote session. EMC is comparing a configuration with VMAX 40K plus an EMC VFCache host-side flash memory cache card to a configuration with an IBM and HDS disk system without host-side flash memory cache also configured. The comparison is clearly apples-to-oranges. Other disk system configuration details are also omitted.
FAST VP is EMC's name for its sub-volume drive tiering feature, comparable to IBM Easy Tier and Hitachi's Dynamic Tiering. The graph implies that IBM and HDS can only achieve a modest increment improvement from their sub-volume tiering. I beg to differ. I have seen various cases where a small amount of SSD on IBM DS8000 series can drastically improve performance 200 to 400 percent.
The "DBClassify" shown on the graph is a tool run as part of an EMC professional services offering called Database Performance Tiering Assessment, makes recommendations for storing various database objects on different drive tiers based on object usage and importance. Do you really need to pay for professional services? With IBM Easy Tier, you just turn it on, and it works. No analysis required, no tools, no professional services, and no additional charge!
- VFCache is an optional product from EMC that currently has no integration whatsoever with VMAX. A fair comparison would have included a host-side flash memory cache (from any vendor) when the IBM or HDS storage system was configured. Or leave it out altogether and just focus on the sub-volume tiering comparison.
Keep in mind that EMC's VFCache supports only selected x86-based hosts. IBM has published a [Statement of Direction] indicating that it will also offer this for Power systems running AIX and Linux host-side flash memory cache integrated with DS8000 Easy Tier.
I feel EMC's claims about IBM DS8000 performance are vague and misleading. EMC appears to lack the kind of technical marketing integrity that IBM strives to attain.
Since EMC is not able or willing to publish fair and meaningful performance comparisons, it is up to me to set the record straight and point out EMC's failings in this matter.
Reminder: It's not to late to register for my Webcast "Solving the Storage Capacity Crisis" on Tuesday, September 25. See my blog post [Upcoming events in September] to register!
technorati tags: IBM, DS8000, DS8800, HDS, VSP, EMC, VMAX, Symmetrix, VFCache, Easy Tier, FAST VP
Five years ago, I sprayed coffee all over my screen from something I read on a blog post from fellow blogger Hu Yoshida from HDS. You can read what cased my reaction in my now infamous post [Hu Yoshida should know better]. Subsequently, over the years, I have disagreed with Hu on a variety of of topics, as documented in my 2010 blog post [Hu Yoshida Does It Again].
(Apparently, I am not alone, as the process of spraying one's coffee onto one's computer screen while reading other blog posts has been referred to as "Pulling a Tony" or "Doing a Tony" by other bloggers!)
Fortunately, my IBM colleague David Sacks doesn't drink coffee. Last month, David noticed that Hu had posted a graph in a recent blog entry titled [Additional Storage Performance Efficiencies for Mainframes], comparing the performance of HDS's Virtual Storage Platform (VSP) to IBM's DS8000.
For those not familiar with disk performance graphs, flatter is better, lower response time and larger IOPS are always desired. This graph implies that the HDS disk system is astonishingly faster than IBM's DS8000 series disk system. Certainly, the HDS VSP qualifies as a member of the elite [Super High-End club] with impressive SPC benchmark numbers, and is generally recognized as a device that works in IBM mainframe environments. But this new comparison graph is just ridiculous!
(Note: While SPC benchmarks are useful for making purchase decisions, different disk systems respond differently to different workloads. As the former lead architect of DFSMS for z/OS, I am often brought in to consult on mainframe performance issues in complex situations. Several times, we have fixed performance problems for our mainframe clients by replacing their HDS systems with IBM DS8000 series!)
Since Hu's blog entry contained very little information about the performance test used to generate the graph, David submitted a comment directly to Hu's blog asking a few simple questions to help IBM and Hu's readers determine whether the test was fair. Here is David's comment as submitted:
(Disclosure: I work for IBM. This comment is my own.)
I was quite surprised by the performance shown for the IBM DS8000 in the graph in your blog. Unfortunately, you provided very little detail about the benchmark. That makes it rather difficult (to say the least) to identify factors behind the results shown and to determine whether the comparison was a fair one.
Of the little information provided, an attribute that somewhat stands out is that the test appears to be limited to a single volume at least, that's my interpretation of "LDEV: 1*3390-3"? IBM's internal tests for this kind of case show far better response time and I/Os per second than the graph you published.
Here are a few examples of details you could provide to help readers determine whether the benchmark was fair and whether the results have any relevance to their environment.
- What DS8000 model was the test run on? (the DS8000 is a family of systems with generations going back 8 years. The latest and fastest model is the DS8800.)
- What were the hardware and software configurations of the DS8000 and VSP systems, including the number and speed of performance-related components?
- What were the I/O workload characteristics (e.g., read:write ratio and block size(s))?
- What was the data capacity of each volume? (Allocated and used capacity.)
- What were the cache sizes and cache hit ratios for each system? (The average I/O response times under 1.5 milliseconds for each system imply the cache hit ratios were relatively high.)
- How many physical drives were volumes striped across in each system?"
Unlike my blog on IBM, HDS bloggers like Hu are allowed to reject or deny comments before they appear on his blog post. We were disappointed that HDS never posted David's comment nor responded to it. That certainly raises questions about the quality of the comparison.
So, perhaps this is yet another case of [Hitachi Math], a phrase coined by fellow blogger Barry Burke from EMC back in 2007 in reference to outlandish HDS claims. My earliest mention was in my blog post [Not letting the Wookie Win].
By the way, since the test was about z/OS Extended Address Volumes (EAV), it is worth mentioning that IBM's DS8700 and DS8800 support 3390 volume capacities up to 1 TB each, while the HDS VSP is limited to only 223 GB per volume. Larger volume capacities help support ease-of-growth and help reduce the number of volumes storage administrators need to manage; that's just one example of how the DS8000 series continues to provide the best storage system support for z/OS environments.
Personally, I am all for running both IBM and HDS boxes side-by-side and publishing the methodology, the workload characteristics, the configuration details, and the results. Sunshine is always the best disinfectant!
technorati tags: IBM, DS8000, DS8800, HDS, Hu Yoshida, USP, VSP, mainframe, EAV
This week, Hitachi Ltd. announced their next generation disk storage virtualization array, the Virtual Storage Platform, following on the success of its USP V line. It didn't take long for fellow blogger Chuck Hollis (EMC) to comment on this in his blog post [Hitachi's New VSP: Separating The Wheat From The Chaff]. Here are some excerpts:
"Well, we all knew that Hitachi (through HDS and HP) would be announcing some sort of refresh to their high-end storage platform sooner or later.
As EMC is Hitachi's only viable competitor in this part of the market, I think people are expecting me to say something.
If you're a high-end storage kind of person, your universe is basically a binary star: EMC and Hitachi orbiting each other, with the interesting occasional sideshow from other vendors trying to claim relevance in this space."
Chuck implies that neither Hewlett-Packard (HP) nor Hitachi Data Systems (HDS) as vendors provide any value-add from the box manufactured by Hitachi Ltd. so combines them into a single category. I suspect the HP and HDS folks might disagree with that opinion.
When I reminded Chuck that IBM was also a major player in the high-end disk space, his response included the following gem:
"Many of us in the storage industry believe that IBM currently does not field a competitive high-end storage platform. IDC market share numbers bear out this assertion, as you probably know."
While Chuck is certainly entitled to his own beliefs and opinions, believing the world is flat does not make it so. Certainly, I doubt IDC or any other market research firm has put out a survey asking "Do you think IBM offers a competitive high-end disk storage platform?" Of course, if Chuck is basing his opinion on anecdotal conversations with existing EMC customers, I can certainly see how he might have formed this misperception. However, IDC market share numbers don't support Chuck's assertion at all.
There is no industry-standard definition of what is a "high-end" or "enterprise-class" disk system. Some define high-end as having the option for mainframe attachment via ESCON and/or FICON protocol. Others might focus on features, functionality, scalability and high 99.999+ percent availability. Others insist high-end requires block-oriented protocols like FC and iSCSI, rather than file-based protocols like NAS and CIFS.
For the most demanding mission-critical mix of random and sequential workloads, IBM offers the [IBM System Storage DS8000 series] high-end disk system which connects to mainframes and distributed servers, via FCP and FICON attachment, and supports a variety of drive types and RAID levels. The features that HP and HDS are touting today for the VSP are already available on the IBM DS8000, including sub-LUN automatic tiering between Solid-State drives and spinning disk, called [Easy Tier], thin provisioning, wide striping, point-in-time copies, and long distance synchronous and asynchronous replication.
There are lots of analysts that track market share for the IT storage industry, but since Chuck mentions [IDC] specifically, I reviewed the most recent IDC data, published a few weeks ago in their "IDC Worldwide Quarter Disk Storage Tracker" for 2Q 2010, representing April 1 to June 30, 2010 sales. Just in case any of the rankings have changed over time, I also looked at the previous four quarters: 2Q 2009, 3Q 2009, 4Q 2009 and 1Q 2010.
(Note: IDC considers its analysis proprietary, out of respect for their business model I will not publish any of the actual facts and figures they have collected. If you would like to get any of the IDC data to form your own opinion, contact them directly.)
In the case of IDC, they divide the disk systems into three storage classes: entry-level, midrange and high-end. Their definition of "high-end" is external RAID-protected disk storage that sells for $250,000 USD or more, representing roughly 25 to 30 percent of the external disk storage market overall. Here are IDC's rankings of the four major players for high-end disk systems:
By either measure of market share, units (disk systems) or revenue (US dollars), IDC reports that IBM high-end disk outsold both HDS and HP combined. This has been true for the past five quarters. If a smaller start-up vendor has single digit percent market share, I could accept it being counted as part of Chuck's "occasional sideshow from other vendors trying to claim relevance", but IBM high-end disk has consistently had 20 to 30 percent market share over the past five quarters!
Not all of these high-end disk systems are connected to mainframes. According to IDC data, only about 15 to 25 percent of these boxes are counted under their "Mainframe" topology.
Chuck further writes:
"It's reasonable to expect IBM to sell a respectable amount of storage with their mainframes using a protocol of their own design -- although IBM's two competitors in this rather proprietary space (notably EMC and Hitachi) sell more together than does IBM."
The IDC data doesn't support that claim either, Chuck. By either measure of market share, units (disk systems) or revenue (US dollars), IDC reports that IBM disk for mainframes outsold all other vendors (including EMC, HDS, and HP) combined. And again, this has been true for the past five quarters. Here is the IDC ranking for mainframe disk storage:
IBM has over 50 percent market share in this case, primarily because IBM System Storage DS8000 is the industry leader in mainframe-related features and functions, and offers synergy with the rest of the z/Architecture stack.
So Chuck, I am not picking a fight with you or asking you to retract or correct your blog post. Your main theme, that the new VSP presents serious competition to EMC's VMAX high-end disk arrays, is certainly something I can agree with. Congratulations to HDS and HP for putting forth what looks like a viable alternative to EMC's VMAX.
To learn more about IBM's upcoming products, register for next week's webcast "Taming the Information Explosion with IBM Storage" featuring Dan Galvan, IBM Vice President, and Steve Duplessie, Senior Analyst and Founder of Enterprise Storage Group (ESG).
technorati tags: IBM, DS8000, EMC, Chuck Hollis, Hitachi, HDS, Virtual Storage Platform, VSP, USP-V, HP, P9500, Easy Tier, high-end, enterprise-class, IDC, marketshare
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today, IBM announced its latest IBM Tivoli Key Lifecycle Manager (TKLM) 2.0 version. Here's a quick recap:
- Centralized Key Management
Centralized and simplified encryption key management through Tivoli Key Lifecycle Manager's lifecycle of creation, storage, rotation, and protection of encryption keys and key serving through industry standards. TKLM is available to manage the encryption keys for LTO-4, LTO-5, TS1120 and TS1130 tape drives enabled for encryption, as well as DS8000 and DS5000 disk systems using Full Disk Encryption (FDE) disk drives.
- Partitioning of Access Control for Multitenancy
Access control and partitioning of the key serving functions, including end-to-end authentication of encryption clients and security of exchange of encryption keys, such that groups of devices have different sets of encryption keys with different administrators. This enables [multitenancy] or multilayer security of a shared infrastructure using encryption as an enforcement mechanism for access control. As Information Technology shifts from on-premises to the cloud, multitenancy will become growingly more important.
- Support for KMIP 1.0 Standard
Support for the new key management standard, Key Management Interoperability Protocol (KMIP), released through the Organization for the Advancement of Structured Information Standards [OASIS]. This new standard enables encryption key management for a wide variety of devices and endpoints. See the
[22-page KMIP whitepaper] for more information.
As much as I like to poke fun at Oracle, with hundreds of their Sun/StorageTek clients switching over to IBM tape solutions every quarter, I have to give them kudos for working cooperatively with IBM to come up with this KMIP standard that we can both support.
- Support for non-IBM devices from Emulex, Brocade and LSI
Support for IBM self-encrypting storage offerings as well as suppliers of IT components which support KMIP, including a number of supported non-IBM devices announced by business partners such as Emulex, Brocade, and LSI. KMIP support permits you to deploy Tivoli Key Lifecycle Manager without having to worry about being locked into a proprietary key management solution. If you are a client with multiple "Encryption Key Management" software packages, now is a good time to consolidate onto IBM TKLM.
- Role-based Authorization
Role-based access control for administrators that allows multiple administrators with different roles and permissions to be defined, helping increase the security of sensitive key management operations and better separation of duties. For example, that new-hire college kid might get a read-only authorization level, so that he can generate reports, and pack the right tapes into cardboard boxes. Meanwhile, for that storage admin who has been running the tape operations for the past ten years, she might get full access. The advantage of role-based authorization is that for large organizations, you can assign people to their appropriate roles, and you can designate primary and secondary roles in case one has to provide backup while the other is out of town, for example.
For more details, see the IBM [Announcement Letter].
This week, I'll be in Dallas, Texas. If you are an avid reader located in or near the Dallas area, and want to connect, you know how to reach me.
technorati tags: IBM, TKLM, KMIP, OASIS, encryption, FDE, Multitenancy, EKM, LTO, LTO-4, LTO-5, TS1120, TS1130, DS8000, DS5000, role-based, authorization, Emulex, Brocade, LSI
Did IBM XIV force EMC's hand to announce VMAXe? Let's take a stroll down memory lane.
In 2008, IBM XIV showed the world that it could ship a Tier-1, high-end, enterprise-class system using commodity parts. Technically, prior to its acquisition by IBM, the XIV team had boxes out in production since 2005. EMC incorrectly argued this announcement meant the death of the IBM DS8000. Just because EMC was unable to figure out how to have more than one high-end disk product, doesn't mean IBM or other storage vendors were equally challenged. Both IBM XIV and DS8000 are Tier-1, high-end, enterprise-class storage systems, as are the IBM N series N7900 and the IBM Scale-Out Network Attached Storage (SONAS).
In April 2009, EMC followed IBM's lead with their own V-Max system, based on Symmetrix Engenuity code, but on commodity x86 processors. Nobody at EMC suggested that the V-Max meant the death of their other Symmetrix box, the DMX-4, which means that EMC proved to themselves that a storage vendor could offer multiple high-end disk systems. Hitachi Data Systems (HDS) would later offer the VSP, which also includes some commodity hardware as well.
In July 2009, analysts at International Technology Group published their TCO findings that IBM XIV was 63 percent less expensive than EMC V-Max, in a whitepaper titled [COST/BENEFIT CASE
FOR IBM XIV STORAGE SYSTEM Comparing Costs for IBM XIV and EMC V-Max Systems]. Not surprisingly, EMC cried foul, feeling that EMC V-Max had not yet been successful in the field, it was too soon to compare newly minted EMC gear with a mature product like XIV that had been in production accounts for several years. Big companies like to wait for "Generation 1" of any new product to mature a bit before they purchase.
To compete against IBM XIV's very low TCO, EMC was forced to either deeply discount their Symmetrix, or counter-offer with lower-cost CLARiiON, their midrange disk offering. An ex-EMCer that now works for IBM on the XIV sales team put it in EMC terms -- "the IBM XIV provides a Symmetrix-like product at CLARiiON-like prices."
(Note: Somewhere in 2010, EMC dropped the hyphen, changing the name from V-Max to VMAX. I didn't see this formally announced anywhere, but it seems that the new spelling is the officially correct usage. A common marketing rule is that you should only rename failed products, so perhaps dropping the hyphen was EMC's way of preventing people from searching older reviews of the V-Max product.)
This month, IBM introduced the IBM XIV Gen3 model 114. The analysts at ITG updated their analysis, as there are now more customers that have either or both products, to provide a more thorough comparison. Their latest whitepaper, titled [Cost/Benefit Case for IBM XIV Systems: Comparing Cost
Structures for IBM XIV and EMC VMAX Systems], shows that IBM maintains its substantial cost savings advantage, representing 69 percent less Total Cost of Ownership (TCO) than EMC, on average, over the course of three years.
In response, EMC announced its new VMAXe, following the naming convention EMC established for VNX and VNXe. Customers cannot upgrade VNXe to VNX, nor VMAXe to VMAX, so at least EMC was consistent in that regard. Like the IBM XIV and XIV Gen3, the new EMC VMAXe eliminated "unnecessary distractions" like CKD volumes and FICON attachment needed for the IBM z/OS operating system on IBM System z mainframes. Fellow blogger Barry Burke from EMC explains everything about the VMAXe in his blog post [a big thing in a small package].
So, you have to wonder, did IBM XIV force EMC's hand into offering this new VMAXe storage unit? Surely, EMC sales reps will continue to lead with the more profitable DMX-4 or VMAX, and then only offer the VMAXe when the prospective customer mentions that the IBM XIV Gen3 is 69 percent less expensive. I haven't seen any list or street prices for the VMAXe yet, but I suspect it is less expensive than VMAX, on a dollar-per-GB basis, so that EMC will not have to discount it as much to compete against IBM.
technorati tags: IBM, XIV, Gen3, EMC, DMX-4, VMAX, V-Max, HDS, N7900, SONAS, DS8000, CKD, FICON, TCO
This week I was aboard the Queen Mary in Long Beach, California! This was a business event organized by [Key Info Systems], a valued IBM Business Partner. Key Info resells IBM servers, storage and switches.
The Queen Mary retired in 1967, and has been converted into a hotel and events venue. The locals just parked their car and walked on board, but I got to stay Tuesday through Thursday in one of the cabins. It was long and narrow, with round windows! There were four dials for the bathtub: Cold Salt, Hot Fresh, Cold Fresh, and Hot Salt.
Stepping on the boat was like walking back in time through history! If you decide to go see it, check out the [Art Deco bar at the front of the Promenade deck. The ship is still in the water, but is permanently docked. It is sectioned off to prevent the ocean waves from affecting it, so we did not have the nauseous moving back and forth normally associated with cruise ships.
(It is with a bit of irony that we are on the Queen Mary just days after the tragedy of the [Costa Concordia], the largest Italian cruise ship that ran aground near Isola de Giglio. The captain will have to explain how he [fell into a lifeboat] before he had a chance to wait for everyone else to get safely off the shipwreck. He was certainly no [Captain Sulley]! I am thankful that most of the 4,200 people survived the incident.)
- Executive Welcome
Lief Morin, Founder and Chief Executive for Key Info Systems, kicked off the meeting with highlights of 2011 successes. I have known Lief for years, as Key Info comes to the Tucson EBC on a frequent basis. This event was designed to give his sellers an update of what is the latest for each product line, and what to look forward to in the next 12-18 months.
- Power Systems
My colleague Pat O'Rourke from Austin EBC presented [IBM Power Systems], from the smallest [POWER-based blade servers for BladeCenter] to the largest [Power 795 server]. When it comes to UNIX servers, IBM is [kickin' butt and takin' names], leaving HP and Oracle/Sun to fend for scraps.
- Vision Solutions
The next speaker was from Vision Solutions that provides High Availability solutions for IBM i on Power Systems. In 2010, their company nearly doubled in size with the acquisition of Double-Take, which provides data replication for x86 servers running Windows, Linux, VMware, Hyper-V and other hypervisors. The capabilities of Double-Take sounded similar to what IBM offers with [Tivoli Storage Manager FastBack] and [Tivoli Storage Manager for Virtual Environments].
- Dinner at Sir Winston's
Rather than take the "Ghosts and Legends" tour, I opted for dinner at the Queen Mary's signature restaurant, Sir Winston's. This is a fancy place, so dress accordingly. If you want the Raspberry soufflé, order it early as it takes 30 minutes to prepare!
- System Storage
I presented on a variety of storage topics:
Storage is an important part of the Key Info Systems revenue stream, so I was glad to have lots of questions and interactions from the audience.
- Murder Mystery Dinner
The acting troupe from [Dinner Detective] put on quite the show for us! With all that is going on in the world, it is good to laugh out loud every now and then.
In other murder mystery dinners I have participated in, each person is assigned a "character" and given a script of what to say and when to say it. This was different, we got to pick our own characters. I chose "Doctor Watson", from the Sherlock Holmes series. Several attendees thought it was a double meaning with [IBM Watson], the computer that figured out the clues on Jeopardy! television game show, and has since been [put to work at Wellpoint] to help out the Healthcare industry.
After the "murder" happened, two actors portraying policemen selected members of the audience to answer questions. We didn't get a script of what to say, so everyone had to "ad lib". I was singled out as a suspect, and had fun playing along in character. One of the attendees afterwards said he was impressed that I was able to fabricate such amusing and elaborate responses to their personal and embarassing questions. As a public speaker for IBM, I have had a lot of practice thinking quickly on my feet.
- Fibre Channel and Ethernet Switches
The next two speakers gave us an update on Fibre Channel and Ethernet switches, and their thoughts on the inevitability of Fibre Channel over Ethernet (FCoE). One of the exciting new developments is the [Brocade Network Subscription] which creates a flexible pay-per-use Ethernet port rental model for customers. This is especially timely given the Financial Accounting Standards Board proposed [FASB Change 13] that affects operating leases in the balance sheet.
With the Brocade Network Subscription, you pay monthly for the ports you are using. Need more ports, Brocade will install the added gear. Use fewer ports, Brocade will take the equipment back. There is no term endpoint or residual value like tradtional leasing, so when you are done using the equipment, give it back any time. This is ideal for companies that may need to have a lot of Ethernet ports for the next 2-3 years, but then plan to taper down, and don't want to get stuck with a long-term commitment or capital depreciation.
The last speaker was from VMware. IBM is the #1 reseller of VMware, and VMware commands an impressive 81 percent marketshare in the x86 virtualization space. The speaker presented VMware's strategy going forward, which aligns well with IBM's own strategy, to help companies Cloud-enable their existing IT infrastructures, in preparation for eventual moves to Hybrid or Public cloud deployments.
Special thanks to Lief Morin for sponsoring this event, Raquel Hernandez from IBM for coordinating my travel, and Pete, Christina and Kendrell from Key Info Systems for organizing the activities!
technorati tags: IBM, Queen Mary, Key Info, Art Deco, Costa Concordia, Lief Morin, Pat O'Rourke, Power 795, DS8000, XIV, SONAS, Tape, TS1140, LTFS, Storwize V7000, Unified storage, FCoE, BNS, VMware, Cloud Computing
Continuing my drawn out coverage of IBM's big storage launch of February 9, today I'll cover the IBM System Storage TS7680 ProtecTIER data deduplication gateway for System z.
On the host side, TS7680 connects to mainframe systems running z/OS or z/VM over FICON attachment, emulating an automated tape library with 3592-J1A devices. The TS7680 includes two controllers that emulate the 3592 C06 model, with 4 FICON ports each. Each controller emulates up to 128 virtual 3592 tape drives, for a total of 256 virtual drives per TS7680 system. The mainframe sees up to 1 million virtual tape cartridges, up to 100GB raw capacity each, before compression. For z/OS, the automated library has full SMS Tape and Integrated Library Management capability that you would expect.
Inside, the two control units are both connected to a redundant pair cluster of ProtecTIER engines running the HyperFactor deduplication algorithm that is able to process the deduplication inline, as data is ingested, rather than post-process that other deduplication solutions use. These engines are similar to the TS7650 gateway machines for distributed systems.
On the back end, these ProtecTIER deduplication engines are then connected to external disk, up to 1PB. If you get 25x data deduplication ratio on your data, that would be 25PB of mainframe data stored on only 1PB of physical disk. The disk can be any disk supported by ProtecTIER over FCP protocol, not just the IBM System Storage DS8000, but also the IBM DS4000, DS5000 or IBM XIV storage system, various models of EMC and HDS, and of course the IBM SAN Volume Controller (SVC) with all of its supported disk systems.
Here is the [Announcement Letter
technorati tags: ts7680, z/OS, z/VM, FICON, 3592-J1A, SMS Tape, TS7650, ProtecTIER, mainframe, FCP, DS8000, DS5000, DS4000, XIV, SVC
From Timothy Morgan of [The Register
"With Cisco Systems, EMC, and VMware teaming up to sell integrated IT stacks, Oracle buying Sun Microsystems to create its own integrated stacks, and IBM having sold integrated legacy system stacks and rolling in profits from them for decades, it was only a matter of time before other big IT players paired off."
Once again we are reminded that IBM, as an IT "supermarket", is able to deliver integrated software/server/storage solutions, and our competitors are scrambling to form their own alliances to be "more like IBM." This week, IBM announced new ordering options for storage software with System x servers, including BladeCenter blade servers and IntelliStation workstations. Here's a quick recap:
- FastBack v6.1
IBM Tivoli Storage Manager FastBack v6.1 supports both Windows and Linux! FastBack is a data protection solution for ROBO (Remote Office, Branch Office) locations. It can protect Microsoft Exchange, Lotus Domino, DB2, Oracle applications. FastBack can provide full volume-level recovery, as well as individual file recovery, and in some cases Bare Machine Recovery. FastBack v6.1 can be run stand-alone, or integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution.
- FlashCopy Manager v2.1
FlashCopy Manager uses point-in-time copy capabilities, such as SnapShot or FlashCopy, to protect application data using an application-aware approach for Microsoft Exchange, Microsoft SQL server, DB2, Oracle, and SAP. It can be used with IBM SAN Volume Controller (SVC), DS8000 series, DS5000 series, DS4000 series, DS3000 series, and XIV storage systems. When applicable, FlashCopy manager coordinates its work with Microsoft's Volume Shadow Copy Services (VSS) interface. FlashCopy Manager can provide data protection using just point-in-time disk-resident copies, or can be integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution to move backup images to external storage pools, such as low-cost, energy-efficient tape cartridges.
- General Parallel File System (GPFS) v3.3 Multiplatform
GPFS can support AIX, Linux, and Windows! Version 3.3 adds support for Windows 2008 Server on 64-bit chipset architectures from AMD and Intel. Now you can have a common GPFS cluster with AIX, Linux and Windows servers all sharing and accessing the same files. A GPFS cluster can have up to 256 file systems. Each of these file systems can be up to 1 billion files, up to 1PB of data, and can have up to 256 snapshots. GPFS can be used stand-alone, or integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution with parallel backup streams.
For full details on these new ordering options, see the IBM [Press Release].
technorati tags: System x, BladeCenter, IntelliStation, Cisco, EMC, VMware, VCE, Oracle, Sun, HP, Microsoft, FastBack, FlashCopy, GPFS, Windows, Linux, SAP, SVC, VSS, DS8000, DS5000, DS4000, DS3000, SQL, Lotus, Domino
Every January, we look back into the past as well as look into the future for trends to watch for the upcoming year. Ray Lucchesi of Silverton Consulting has a great post looking back at the [Top 10 storage technologies over the last decade]. I am glad to see that IBM has been involved with and instrumental in all ten technologies.
Looking into the future, Mark Cox of eChannel has an article [Storage Trends to Watch in 2011], based on his interviews with two fellow IBM executives: Steve Wojtowecz, VP of storage software development, and Clod Barrera, distinguished engineer and CTO for storage. Let's review the four key trends:
- Cloud Storage and Cloud Computing
No question: Cloud Computing will be the battleground of the IT industry this decade. I am amused by the latest spate of Microsoft commercials where problems are solved with someone saying "...to the cloud". Riding on the coat tails of this is "Cloud Storage", the ability to store data across an Internet Protocol (IP) network, such as 10GbE Ethernet, in support of Cloud Computing applications. Cloud Storage protocols in the running include NFS, CIFS, iSCSI and FCoE.
Mark writes "..vendors who aren't investing in cloud storage solutions will fall behind the curve."
- Economic Downturn forces Innovation
The old British adage applies: "Necessity is the mother of invention." The status quo won't do. In these difficult economic times, IT departments are running on constrained budgets and staff. This forces people to evaluate innovative technologies for storage efficiency like real-time compression and data deduplication to make better use of what they currently have. It also is forcing people to take a "good enough" attitude, instead of paying premium prices for best-of-breed they don't really need and can't really afford.
- IT Service Management
Companies are getting away from managing individual pieces of IT kit, and are focusing instead on the delivery of information, from the magnetic surface of disk and tape media, to the eyes and ears of the end users. The deployment mix of private, hybrid and public clouds makes this even more important to measure and manage IT as a set of services that are delivered to the business. IT Service Management software can be the glue, helping companies implement ITIL v3 best practices and management disciplines.
- Smarter Data Placement
A recent survey by "The Info Pro" analysts indicates that "managing storage growth" is considered more critical than "managing storage costs" or "managing storage complexity".
This tells me that companies are willing to spend a bit extra to deploy a tiered information infrastructure if it will help them manage storage growth, which typically ranges around 40 to 60 percent per year. While I have discussed the concept of "Information Lifecycle Management" (ILM), for the past four years on this blog, I am glad to see it has gone mainstream, helped in part with automated storage tiering features like IBM System Storage Easy Tier feature on the IBM DS8000, SAN Volume Controller and Storwize V7000 disk systems. Not all data is created equal, so the smart placement of data, based on the business value of the information contained, makes a lot of sense.
These trends are influencing what solutions the various different vendors will offer, and will influence what companies purchase and deploy.
technorati tags: IBM, Steve Wojtowecz, Clod Barrera, Mark Cox, Cloud Computing, Cloud, Storage, NFS, CIFS, iSCSI, FCoE, real-time compression, deduplication, IT Service Management, Easy Tier, DS8000, SVC, Storwize V7000