Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior IT Specialist for the IBM System Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2011, Tony celebrated his 25th year anniversary with IBM Storage on the same day as the IBM's Centennial. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
You may not be the right person to ask but I am asking everyone so "How do you see hybrid disk drives?"
(For the record, I am not immediately related to Robert. At onepoint, "Pearson" was the 12th most common surname in the USA, but now doesn't even make the Top 100.)
Robert, I would like to encourage you and everyone else to ask questions, don't worry if I am the wrong person to ask, asprobably I know the right person within IBM. Some people have called me the "Kevin Bacon" of Storage,as I am often less than six degrees away from the right person, having worked in IBM Storage for over 20 years.
For those not familiar with hybrid drives, there is a good write-up in Wikipedia.
Unfortunately, most of the people I would consult on this question, such as those from Market Intelligence or Research, are on vacation for the holidays, so, Robert, I will have to rely on my trusted 78-card Tarot deck and answer you with a five-card throw.
Your first card, Robert, is the Hermit. This card represents "introspection". The best I/O is no I/O, which means that if applications can keep the information they need inside server memory, you can avoid the bus bandwidth limitations to going to external storage devices. Where external storage makes sense is when data is shared between servers, or when the single server is limited to a set amount of internal memory. So, consider maxing out the memory in your server first (IBM would be glad to sell you more internal memory!!!), then consider outside solid-state or hybrid devices. Windows for example has an architectural limit of 4GB.
Your second card, Robert, is the Four of Cups, representing "apathy".On the card, you see three cups together, with the fourth cup being delivered from a cloud. This reminds me thatwe have three storage tiers already (memory,disk,tape), and introducing a fourth tier into the mix may not garnermuch excitement. For the mainframe, IBM introduced a Solid-State Device, call the Coupling Facility, which can be accessed from multipleSystem z servers. It is used heavily by DFSMS and DB2 to hold shared information. However, given some customer's apathytowards Information Lifecycle Management which includes "tiered storage", introducing yet another tier that forcespeople to decide what data goes where may be another challenge.
Your third card, Robert, is the Chariot, which represents "Speed, Determination,and Will". In some cases, solid state disk are faster for reading, but can be slower for writing. In the case of ahybrid drive, where the memory acts as a front-end cache, read-hits would be faster, but read-misses might be slower.While the idea of stopping the drives during inactivity will reduce power consumption, spinning up and slowing downthe disk may incur additional performance penalties. At the time of this post, the fastest disk system remains the IBM SAN Volume Controller, based on SPC-1 and SPC-2 benchmarks in excess of those published for other devices.
Your fourth card, Robert, is the Eight of Pentacles, which represents"Diligence, Hard work". The pentacles are coins with five-sided stars on them, and this often represents money.Our research team has projected that spinning disk will continue to be a viable and profitable storage media for at least anothereight years.
Your fifth and last card, Robert, is the World, which normallyrepresents "Accomplishment", but since it is turned upside down, the meaning is reversed to "Limitation". Some Hybriddisks, and some types of solid state memory in general, do have limitations in the number of write cycles they can handle. For thoseunhappy with the frequency and slowness for rebuilds on SATA disk may find similar problems with hybrid drives.For that reason, businesses may not trust using hybrid drives for their busiest, mission-critical applications, but certainlymight use it for archive data with lower write-cycle requirements.
The tarot cards are never wrong, but certainly interpretations of the cards can be.
(Note: IBM [Guidelines] prevent me from picking blogfights, so this post is only to set the record straight on some misunderstandings, point to some positive press about IBM's leadership in this area, and for me to provide a different point of view.)
First, let's set the record straight on a few things. The [RedPaper is still in draft form] under review, and so some information has not yet been updated to reflect the current situation.
You can have 16 or 32 SSD per DA pair. However, you can only have a maximum of 128 SSD drives total in any DS8100 or DS8300. In the case of the IBM DS8300 with 8 DA pairs, it makes more senseto spread the SSD out across all 8 pairs, and perhaps this is what confused BarryB.
Yes, you can order an all-SSD model of the IBM DS8000 disk system. I don't see anywhere in the RedPaper that suggests otherwise, and I have confirmed with our offering manager that this is the case.
The 73GB and 146GB are freshly manufactured from STEC. The 146GB drive and 200GB drives are actually the same drive but just formatted differently. The 200GB format does not offer as much spare capacity for wear-leveling, and are therefore intended only for read-intensive workloads. (Perhaps EMC wants you to find this out the hard way so that you replace them more often???) These reduced-spare-capacity formats may not be appropriate with some write-intensive workloads. Don't let anyone from EMC try to misrepresent the 73GB or 146GB drives from STEC as older, obsolete, collecting dust in a warehouse, or otherwise no longer manufactured by STEC.
You can relocate data from HDD to SSD using "Data Set FlashCopy", a feature that does not involve host-based copy services, does not consume any MIPS on your System z mainframe, and is performed inside the DS8000 disk system. You can also use host-based copy services as well, but it is not the only way.
You can use any supported level of z/OS with SSD in the IBM DS8000. There is ENHANCED support mentioned in the RedPaper that you get only with z/OS 1.8 and above, allowing you to create automation policies that place data sets onto SSD or non-SSD storage pools. This synergy makes SSD with IBM DS8000 superior to the initial offerings that EMC had offered without this OS support.
I find it amusing that BarryB's basic argument is that IBM's initial release of SSD disk on DS8000 is less than what the potential architecture could be extended to support much more. Actually, if you look at EMC's November release of Atmos, as well as their most recent announcement of V-Max, they basically say the same thing "Stay Tuned, this is just our initial release, with various restrictions and limitations, but more will follow." Architecturally, IBM DS8000 could support a mix of SSD and non-SSD on the same DA pairs, could support RAID6 and RAID10 as well, and could support larger capacity drives or use higher-capacity read-intensive formats. These could all be done via RPQ if needed, or in a follow-on release.
BarryB's second argument is that IBM is somehow "throwing cold water" on SSD technology. That somehow IBM is trying to discourage people from using SSD by offering disk systems with this technology. IBM offered SSD storage on BladeCenter servers LONG BEFORE any EMC disk system offering, and IBM continues to innovate in ways that allow the best business value of this new technology. Take for example this 24-page IBM Technical Brief:[IBM System z® and System Storage DS8000:Accelerating the SAP® Deposits Management Workload With Solid State Drives]. It is full of example configurations that show that SSD on IBM DS8000 can help in practical business applications. IBM takes a solution view, and worked with DB2, DFSMS, z/OS, High Performance FICON (zHPF), and down the stack to optimize performance to provide real business value innovation. Thanks to this synergy,IBM can provide 90 percent of the performance improvement with only 10 percent of the SSD disk capacity as EMC offerings. Now that's innovative!
The price and performance differences between FC and SATA (what EMC was mostly used to) is only 30-50 percent. But the price and performance differences between SSD and HDD is more than an order of magnitude in some cases 10-30x, similar to the differences between HDD and tape. Of course, if you want hybrid solutions that take best advantage of SSD+HDD, it makes more sense to go to IBM, the leading storage vendor that has been doing HDD+Tape hybrid solutions for the past 30 years. IBM understands this better, and has more experience dealing with these orders of magnitude than EMC.
But don't just take my word for it. Here is an excerpt from Jim Handy, from [Objective Analysis] market research firm, in a recent Weekly Review from [Pund-IT] (Volume 5, Issue 23--May 6, 2009):
"What about IBM? One thing that we are finding is that IBM really “Gets It” in the area offlash in the data center. Readers of the Pund-IT Review will not only recall that IBM Researchpushed its SSD-based “Quicksilver” storage system to one million IOPS using Fusion-ioflash-based storage, but they also may have noticed that the recent MySQL and mem-cachedappliances recently introduced by Schooner Information Technology are both flash-enableddevices introduced in partnership with IBM. Ironically, while other OEMs are takingthe cautious approach of introducing a standard SSD option to their systems first, IBM appearsto have been working on several approaches simultaneously to bring flash to thedata center not only in SSDs, but in innovative ways as well."
As for why STEC put out a press release on their own this week without a corresponding IBM press release, I can only say that IBM already announced all of this support back in February, and I blogged about it in my post [Dynamic Infrastructure - Disk Announcements 1Q09]. This is not the first time one of IBM's suppliers has tried to drum up business in this manner. Intel often funds promotions for IBM System x servers (the leading Intel-based servers in the industry) to help drive more business for their Xeon processor.
So, BarryB, perhaps its time for you to take out your green pen and work up another one of your all-too-common retraction and corrections.[Read More]
Well, it's Tuesday again, and that means more IBM announcements!
Today, IBM announced the enhanced IBM System Storage DS3200 disk system.It is in our DS3000 series, the DS3200 is SAS-attach, DS3300 is iSCSI-attach, and DS3400 is FC-attach. All of them support up to 48 drives, which can be a mix of SAS and SATA drives.
The DS3200 supports the following operating environments (see IBM's [Interop Matrix] for details):
Linux (both Linux-x86 and Linux on POWER)
With today's announcements, the DS3200 can be used to boot from, as well as contain data. This is ideal to combine with IBM BladeCenter. With the IBM BladeCenter you can have 14 blades, either x86 or POWER based processors, attached to a DS3200 via SAS switch modules in the back of the chassis.
Let's take an example of how this can be used for a Scale-Out File Services[SoFS] deployment.
First, we start with servers. We can have either three [IBM System x3650] servers, but this would use up all six of the direct-attach ports. Instead, we'll choose the [BladeCenter H chassis], with three HS21 blades for SoFS, and that leaves us with eleven empty blade slots we could put in a management node, or other blades to run applications.
SAS connectivity modules
The IBM BladeCenter [SAS Connectivity Module] allows the blade servers to connect to a DS3200. Two of them fit right in the back of the BladeCenter chassis, providing full redundancy without consuming additional rack space.
DS3200 and EXP3000 expansion drawers
We'll have one DS3200 controller with twelve internal drives, and three expansion EXP3000 drawers with twelve drives each, for a total of 48 drives. Using 1TB SATA, this would be 48 TB raw capacity.
The end result? You get a 48TB NAS scalable storage solution, supporting up to 7500 concurrent CIFS and NFS users, with up to 700 MB/sec with large block transfers. By using BladeCenter, you can expand performance by adding more blades to the Chassis, or have some blades running SAP or Oracle RAC have direct read/write access to the SoFS data.
Just another example on how IBM can bring together all the components of a solution to provide customer value!
Storage Networking World conference is over, and the buzz from the analysts appears to be focused onXiotech's low-cost RAID brick (LCRB) called Intelligent Storage Element, or ISE.
(Full disclosure: I work for IBM, not Xiotech, in case there weren't enough IBM references on this blog page to remindyou of that. I am writing this piece entirely from publicly available sources of information, and notfrom any internal working relationships between IBM and Xiotech. Xiotech is a member of the IBM BladeCenteralliance and our two companies collaborate together in that regard.)
Fellow blogger Jon Toigo in his DrunkenData blog posted [I’m Humming “ISE ISE Baby” this Week] and then a follow-up post[ISE Launches]. I looked up Xiotech's SPC-1benchmark numbers for the Emprise 5000 with both 73GB and 146GB drives, and at 8,202 IOPS per TB, does not seem to be as fast as IBM SAN VolumeControllers 11,354 IOPS per TB. Xiotech offers an impressive 5 year warranty (by comparison, IBM offers up to 4 years, and EMC I think is stillonly 90 days).Jon also wrote a review in [Enterprise Systems]that goes into more detail about the ISE.
Fellow blogger Robin Harris in his StorageMojo blog posted [SNW update - Xiotech’s ISE and the dilithium solution], feeling that Xiotech should win the "Best Announcement at SNW" prize. He points to the cool video on the[Xiotech website]. In that video, they claim 91,000 IOPS.Given that it took forty(40) 73GB drives (or 4 datapacs) in the previous example to get 8,202 IOPS for 1TB usable, I am guessing the 91,000 IOPS is probably 44 datapacs (440 drives) glommed together, representing 11TB usable.The ISE design appears very similar to the "data modules" used in IBM's XIV Nextra system.
Fellow blogger Mark Twomey from EMC in his StorageZilla blog posted[Xiotech: Industry second]correctly points out that Xiotech's 520-byte block (512 bytes plus extra for added integrity) was not the firstin the industry. Mark explains that EMC CLARiiON had this since the early 1990's, and implies in the title that this must have been the first in the industry, making Xiotech an industry second. Sorry Mark, both EMC and Xiotech were late to the game. IBM had been using 520-byte blocksize on its disk since 1980 with the System/38. This system morphed to the AS/400, and the blocksize was bumped up to 522 bytes in 1990, and is now called the System i, where the blocksize was bumped up yet again to 528 bytes in 2007.
While IBM was clever to do this, it actually means fewer choices for our System i clients, being only able to chooseexternal disk systems that explicitly support these non-standard blocksize values, such as the IBM System Storage DS8000and DS6000 series. (Yes, BarryB, IBM still sells the DS6000!) The DS6000 was specifically designed with the System i and smaller System z mainframes in mind, and in that niche does very well. Fortunately, as I mentioned in my February post [Getting off the island - the new i5/OS V6R1], IBM has now used virtualization, in the form of the VIOS logical partition, to allow i5/OS systems to attach to standard 512-byte block devices, greatly expanding the storage choices for our clients.
(Side note: SNW happens twice per year, so the challenge is having something new and fresh to talk about each time. While Andy Monshaw, General Manager of IBM System Storage, highlighted some of the many emerging technologies in his keynote address, IBM shipped on many of them prior to his last appearance in October 2007: thin provisioning in the IBM System Storage N series, deduplication in the IBM System Storage N series Advanced Single Instance Storage (A-SIS) feature, and Solid State Disk (SSD) drives in the IBM BladeCenter HS21-XM models. Of course, not everyone buys IBM gear the first day it is available, and IBM is not the only vendor to offer these technologies. My point is that for many people, these are still not yet deployed in their own data center, and so they are still in the future for them. However, since these IBM deliveries happened more than six months ago, they're old news in the eyes of the SNW attendees. While those who follow IBM closely would know that, others like[Britney Spears] may not.)
Back in the 1990s, when IBM was developing the IBM SAN Volume Controller (SVC), we generically called the managed disk arrays that were being virtualized by the SVC as "low-cost RAID brick" or LCRB. The IBM DS3400 is a good example of this. However, as we learned, SVC is not just for LCRB, it adds value in front of all kinds of disk systems, including the not-so-low-cost EMC DMX and IBM DS8000 disk systems. ISE might make a reasonable back-end managed disk device for IBM SVC to virtualize. This gives you the new cool features of Xiotech's ISE, with IBM SVC's faster performance, more robust functionality and advanced copy services.
Next week, I'll be in South America in meetings with IBM Business Partners and storage sales reps.
EMC Corporation (NYSE:EMC) today announced it has been positioned as a leader in the Forrester Wave™: Enterprise Open Systems Virtual Tape Library (VTL), Q1 2008 by Forrester Research, Inc. (January 31, 2008), an independent market and technology research firm. EMC achieved a position as a leader in the Forrester Wave report on virtual tape libraries based on the largest installed base of the EMC® Disk Library family of systems, its broad ecosystem interoperability. Virtual tape libraries emulate tape drives and work in conjunction with existing backup software applications, enabling fast backup and restoration of data by using high-capacity, low-cost disk drives.
EMC was the first major vendor in the open systems virtual tape library market as it introduced the EMC Disk Library in April 2004 and today is a leading provider of open systems virtual tape solutions, with systems that are designed for businesses and organizations of all sizes.
While the press release implies that "EDL equals VTL", Chuck tries to explain they are in fact very different. Here is an excerpt from his blog post:
Virtual Tape Libraries vs. Disk Libraries
As many of you know, VTLs have been around for a while. They use disk as a cache -- they buffer the incoming backup streams, do some housekeeping and stacking, then turn around and write tape efficiently. When you go to restore, you're usually coming back off of tape, unless the backup image in question is sitting in the disk cache.
Now, there is nothing wrong with the VTL approach, but it was conceived in a time when disks were horribly expensive. It was also pretty clear to many of us that disks were going to be a whole lot cheaper in the near future, and this fundamental assumption wouldn't be valid for much longer.
I kept thinking in terms of disk as a direct target for a backup application. No modifications to the backup application. Native speed of sequential disks for both backup and restore. Tape positioned as a backup to the backup. Use the strengths of the underlying array (e.g. CLARiiON) for performance, availability, management, etc.
We ended up calling the concept a "disk library" to differentiate from the VTLs that had come before it. It was a different value proposition and offering, based on the emergence of lower-cost disk media.
... It's nice to see we're at 1,100+ customers, and still going strong.
For those new to the blogosphere, there is a difference between "Press Releases" as formalcorporate communications versus "Blog Posts" which are informal opinions of the individual blogger, whichmay or may not match exactly the views of their respective employer.As we've learned many times before, one should not treat termslike "first" or "leader" in corporate press releases literally! Let's explore each.
Was EDL the first "open systems" Virtual Tape Library?
This is implied by the Forrester report. Chuck mentions the "VTLs that had came before it" in his blog, and many people are aware that IBM and StorageTek had introduced mainframe-attached VTLs in the 1990s. But what about VTL for "open systems"?
(Hold aside for the moment that IBM System zmainframe is an open system itself, with z/OS certified as a bona fide UNIX operating system by the [the Open Group] standards body. Most analysts and research firms usually refer only to the non-mainframe versions of UNIX and Windows. Alternative definitions for "open systems" can be foundin [Web definitions or Wikipedia]. I will assume Forrester meantnon-mainframe servers.)
IBM announced AIX non-mainframe attachment via SCSI connectivity to the IBM 3494 Virtual Tape Server (VTS) on Feb 16, 1999, with general availability in May 28, 1999. That's nearly FIVE YEARS before the April 2004 introduction of EDL. IBM VTS support for Sun Solaris and Microsoft Windows came shortly thereafter in November 2000, and support for HP-UX a bit later in June 2001. One of my 17 patents is for the software inside the IBM 3494 VTS, so like Chuck, I can takesome pride in the success of a successful product.
(I don't remember if StorageTek, which was subsequently acquired by Sun, had ever supported non-mainframe operating systems with their Virtual Storage Manager[VSM] offering, but if they did, I am sure it was also before EMC.)
Last week, another EMC blogger, BarryB (aka [the Storage Anarchist]),took me to task in comments on my post [IBM now supports 1TB SATA drives]. He felt that IBM should not claim support, given that the software inside the IBM System Storage N series is developed by NetApp. He compared this to the situation of HP and Sun re-badging the HDS USP-V disk system. If someone else wrote the software, BarryB opines, IBM should not claim credit for it. I tried to explain how IBM provides added value and has full-time employees dedicated to N series development and support, butdoubt I have changed his mind.
Why do I bring that up? Because the EMC Disk Library runs OEM software from FalconStor. Basically EMC is assembling a hardware/software solution with components provided from OEM suppliers. Hmmm? Sound familiar? Who is calling the kettle black?
If there is a clear winner here, it is FalconStor itself.Perhaps one of the worst kept industry secrets is that FalconStor software is also used in VTL offerings from Sun, Copan, and IBM, the latter embodied as the [IBM TS7520 Virtualization Engine] offering. If you like the concept of an EDL,but prefer instead one-stop shopping from an "information infrastructure" vendor, IBM can offer the TS7520 along with servers, software and services for a complete end-to-end solution.
Can EMC claim to be "a leader" in Virtual Tape Libraries?
During the measured quarter, IBM shipped its 10 millionth LTO-4 tape drive cartridge to Getty Images, the world's leading creator and distributor of still imagery, footage and multi-media products, as well as a recognized provider of other forms of premium digital content, including music. Getty Images is using the LTO-4 drives as part of a tiered infrastructure of IBM disk and tape solutions that help support the backup needs of their digital imagery;
IBM shipped more than 1,500 Petabytes of tape storage in Q3'07 alone;
During Q3'07, IBM shipped the 10,000th IBM System Storage TS3500 Tape Library. The TS3500 is a highly scalable tape library with support from 1 to 192 tape drives and up to 6,400 cartridge slots for open system, mainframe and virtual tape system attachment.
Let's take a look at the numbers. IBM has sold over 5,400 virtual tape libraries. Sun/STK has sold over 4,000 virtual tape libraries. Both are drastically more than the 1,100 mentioned in Chuck's post. Does IDC recognize EMC in third place? No, EMC chooses instead to declare EDL as disk arrays (probably toprop up their IDC "Disk Tracker" numbers), so they don't even earn an honorable mention under the virtual tape librarycategory. This of course includes the number of mainframe-attached models from IBM and Sun/STK. So, if EMC did call these tape systems instead, they might showup in third place, and as such EMC could claim to be "a leader" in much the same way an athlete can claim to be an "Olympic medalist" winning the bronze for third place. (If you limit thecount to just the FalconStor-based models from IBM, EMC, Sun and Copan, then EMC moves up to first or second, but then press release titles like "EMC a Leader in FalconStor-based non-mainframe Virtual Tape Libraries" can get too confusing.)
Chuck, if you are reading this, I feel you have every right to celebrate your involvement with the EDL. Despite having common software and hardware components, both IBM and EMC can rightfully declare their own unique value-add through their respective VTL offerings. Like the IBM N series, the EMC Disk Library is not diminished by the fact the software was written by someone else. BarryB might disagree.
Fellow Blogger BarryB mentions "chunk size" in his post [Blinded by the light],as it relates to Symmetrix Virtual Provisioning capability. Here is an excerpt:
I mean, seriously, who else but someone who's already implemented thin provisioning would really understand the implications of "chunk" size enough to care?
For those of you who don't know what the heck "chunk size" means (now listen up you folks over at IBM who have yet to implement thin provisioning on your own storage products), a "chunk" is the term used (and I think even trademarked by 3PAR) to refer to the unit of actual storage capacity that is assigned to a thin device when it receives a write to a previously unallocated region of the device.
For reference, Hitachi USP-V uses I think a 42MB chunk, XIV NEXTRA is definitely 1MB, and 3PAR uses 16K or 256K (depending upon how you look at it).
Thin Provisioning currently offered in IBM System Storage N serieswas technically "implemented" by NetApp, and that the Thin Provisioning that will be offered in our IBM XIV Nextrasystems will have been acquired from XIV. Lest I remind you that many of EMC's products were developed by other companies first, then later acquired by EMC, so no need for you to throw rocks from your glass houses in Hopkington.
"Thin provisioning" was first introduced by StorageTek in the 1990's and sold by IBM under the name of RAMAC Virtual Array (RVA). An alternative approach is "Dynamic Volume Expansion" (DVE). Rather than giving the host application a huge 2TB LUN but actually only use 50GB for data, DVE was based on the idea that you only give out 50GB they need now, but could expand in place as more space was required. This was specifically designed to avoid the biggest problem with "Thin Provisioning" which back then was called "Net Capacity Load" on the IBM RVA, but today is now referred to as "over-subscription". It gave Storage Administrators greater control over their environment with no surprises.
In the same manner as Thin Provisioning, DVE requires a "chunk size" to work with. Let's take a look:
On the DS4000 series, we use the term "segment size", and indicate that the choice of a segment size can have some influence on performance in both IOPS and throughput. Smaller segment sizes increase the request rate (IOPS) by allowing multiple disk drives to respond to multiple requests. Large segment sizes increase the data transfer rate(Mbps) by allowing multiple disk drives to participate in one I/O request. The segment size does not actually change what is stored in cache, just what is stored on the disk itself.It turns out in practice there is no advantage in using smaller sizes with RAID 1; only in a few instances does this help with RAID-5 if you can writea full stripe at once to calculate parity on outgoing data. For most business workloads, 64KB or 128KB are recommended. DVE expands by the same number of segments across all disks in the RAID rank, so for example in a 12+P rank using 128KB segment sizes, the chunk size would be thirteen segments, about 1.6MB in size.
SAN Volume Controller
On the SAN Volume Controller, we call this "extent size" and allow it to be various values 64MB to 512MB. Initially,IBM only managed four million extents, so this table was used to explain the maximum amount that could be managedby an SVC system (up to 8 nodes) depending on extent size selected.
IBM thought that since we externalized "segment size" on the DS4000, we should do the same for the SANVolume Controller. As it turned out, SVC is so fast up in the cache, that we could not measure any noticeable performance difference based on extent size. We did have a few problems. First, clients who chose 16MB andthen grew beyond the 64TB maximum addressable discovered that perhaps they should have chosen something larger.Second, clients called in our help desk to ask what size to choose and how to determine the size that was rightfor them. Third, we allowed people to choose different extent sizes per managed disk group, but that preventsmovement or copies between groups. You can only copy between groups that use the same extent size. The generalrecommendation now is to specify 256MB size, and use that for all managed disk groups across the data center.
The latest SVC expanded maximum addressability to 8PB, still more than most people have today in their shops.
Getting smarter each time we introduce new function, we chose 1GB chunks for the DS8000. Based on a mainframebackground, most CKD volumes are 3GB, 9GB, or 27GB in size, and so 1GB chunks simplified this approach. Spreadingthese 1GB chunks across multiple RAID ranks greatly reduced hot-spots that afflict other RAID-based systems.(Rather than fix the problem by re-designing the architecture, EMC will offer to sell you software to help you manually move data around inside the Symmetrix after the hot-spot is identified)
Unlike EMC's virtual positioning, IBM DS8000 dynamic volume expansion does work on CKD volumes for our System z mainframe customers.
The trade-off in each case was between granularity and table space. Smaller chunks allow finer control on the exact amount allocated for a LUN or volume, but larger chunks reduced the number of chunks managed. With our advanced caching algorithms, changes in chunk size did not noticeably impact performance. It is best just to come up with a convenient size, and either configure it as fixed in the architecture, or externalize it as a parameter with a good default value.
Meanwhile, back at EMC, BarryB indicates that they haven't determined the "optimal" chunk size for their newfunction. They plan to run tests and experiments to determine which size offers the best performance, and thenmake that a fixed value configured into the DMX-4. I find this funny coming from the same EMC that won't participate in [standardized SPC benchmarks] because they feel that performance is a personal and private matter between a customer and their trusted storage vendor, that all workloads are different, and you get the idea. Here's another excerpt:
Back at the office, they've taking to calling these "chunks" Thin Device Extents (note the linkage back to EMC's mainframe roots), and the big secret about the actual Extent size is...(wait for it...w.a.i.t...for....it...)...the engineers haven't decided yet!
That's right...being the smart bunch they are, they have implemented Symmetrix Virtual Provisioning in a manner that allows the Extent size to be configured so that they can test the impact on performance and utilization of different sizes with different applications, file systems and databases. Of course, they will choose the optimal setting before the product ships, but until then, there will be a lot of modeling, simulation, and real-world testing to ensure the setting is "optimal."
Finally, BarryB wraps up this section poking fun at the chunk sizes chosen by other disk manufacturers. I don't knowwhy HDS chose 42MB for their chunk size, but it has a great[Hitchiker's Guide to the Galaxy]sound to it, answering the ultimate question to life, the universe and everything. Hitachi probably went to theirDeep Thought computer and asked how big should their "chunk size" be for their USP-V, and the computer said: 42.Makes sense to me.
I have to agree that anything smaller than 1MB is probably too small. Here's the last excerpt:
Now, many customers and analysts I've spoken to have in fact noted that Hitachi's "chunk" size is almost ridiculously large; others have suggested that 3PAR's chunks are so small as to create performance problems (I've seen data that supports that theory, by the way).
Well, here's the thing: the "right" chunk size is extremely dependent upon the internal architecture of the implementation, and the intersection of that ideal with the actual write distribution pattern of the host/application/file system/database.
So my suggestion to EMC is, please, please, please take as much time as you need to come up with the perfect"chunk size" for this, one that handles all workloads across a variety of operating systems and applications, from solid-state Flash drives to 1TB SATA disk. Take months or years, as long as it takes. The rest of the world is in no hurry, as thin provisioning or dynamic volume expansion is readily available on most other disk systems today.
Maybe if you ask HDS nicely, they might let you ask their computer.
Well, it's 2008, which could mark the end to RAID5 and mark the beginnings of a new disk storagearchitecture. IBM starts the year with exciting news, acquiring new disk technology from a smallstart-up called XIV, led by former-EMCer Moshe Yanai. Moshe was ousted publicly in 2001 from hisposition as EMC's VP of engineering, and formed his own company. It didn't take long for EMC bloggersto poke fun at this already. Mark Twomey, in his StorageZilla blog, had mentioned XIV before back in August,[XIV], and again todayin [IBM Buys XIV].
To address the new requirements associated with next generation digital content, IBM chose XIV and its NEXTRA™ architecture for its ability to scale dynamically, heal itself in the event of failure, and self-tune for optimum performance, all while eliminating the significant management burden typically associated with rapid growth environments. The architecture also is designed to automatically optimize resource utilization of all the components within the system, which can allow for easier management and configuration and improved performance and data availability.
"We are pleased to become a significant part of the IBM family, allowing for our unique storage architecture, our engineers and our storage industry experience to be part of IBM's overall storage business," said Moshe Yanai, chairman, XIV. "We believe the level of technological innovation achieved by our development team is unparalleled in the storage industry. Combining our storage architectural advancements with IBM's world-wide research, sales, service, manufacturing, and distribution capabilities will provide us with the ability to have these technologies tackle the emerging Web 2.0 technology needs and reach every corner of the world."
The NEXTRA architecture has been in production for more than two years, with more than four petabytes of capacity being used by customers today.
Current disk arrays were designed for online transaction processing (OLTP) databases. The focus was onusing fastest most expensive 10K and 15K RPM Fibre Channel drives, with clever caching algorithmsfor quick small updates of large relational databases. However, the world is changing, and peoplenow are looking for storage designed for digital media, archives, and other Web 2.0 applications.
One problem that NEXTRA architecture addresses is RAID rebuild. In a standard RAID5 6+P+S configuration of 146GB 10K RPM drives, the loss of one disk drive module (DDM) was recovered by reconstructing the data from parity of the other drives onto the spare drive. The process took46 minutes or longer, depending on how busy the system was doing other things. During this time,if a second drive in the same rank fails, all 876GB of data are lost. Double-drive failures are rare,but unpleasant when they happen, and hopefully you have a backup on tape to recover the data from.Moving to slower, less expensive SATA drives made this situation worse. The drives have highercapacity, but run at slower speeds. When a SATA drive fails in a RAID5 array, it could take severalhours to rebuild, and that is more time exposure for a second drive failure. A rebuild for a 750GBSATA drive would take five hours or more,with 4.5 TB of data at risk during the process if a second drive failure occurs.
The Nextra architecture doesn't use traditional RAID ranks or spare DDMs. Instead, data is carved up into 1MBobjects, and each object is stored on two physically-separate drives. In the event of a DDM loss, allthe data is readable from the second copies that are spread across hundreds of drives. New copies aremade on the empty disk space of the remaining system. This process can be done for a lost 750GB drive in under20 minutes. A double-drive failure would only lose those few objects that were on both drives, so perhaps1 to 2 percent of the total data stored on that logical volume.
Losing 1 to 2 percent of data might be devastating to a large relational database, as this could impactthe entire access to the internal structure. However, this box was designed for unstructuredcontent, like medical images, music, videos, Web pages, and other discrete files. In the event of a double-drivefailure, individual files would be recovered, such as with IBM Tivoli Storage Manager backup software.
IBM will continue to offer high-speed disk arrays like the IBM System Storage DS8000 and DS4800 for OLTP applications, and offer NEXTRA for this new surge in digital content of unstructured data. Recognizing this trend, diskdrive module manufacturers will phase out 10K RPM drives, and focus on 15K RPM for OLTP, and low-speedSATA for everything else.
Update: This blog post was focused on the version of XIV box available as of January 2008 that was built by XIV prior to the IBM acquisition. IBM has since made a major revision, made available August 2008 thataddresses a variety of workloads, including database, OLTP, email, as well as digital content and unstructuredfiles. Contact your IBM or IBM Business Partner for the latest details!
Bottom line, IBM continues to celebrate the new year, while the EMC folks in Hopkington, MA will continue to nurse their hangovers. Now that's a good way to start the new year!
Array-based replication does have drawbacks; all externalised storage becomes dependent on the virtualising array. This makes replacement potentially complex. To date, HDS have not provided tools to seamlessly migrate away from one USP to another (as far as I am aware). In addition, there's the problem of "all your eggs in one basket"; any issue with the array (e.g. physical intervention like fire, loss of power, microcode bug etc) could result in loss of access to all of your data. Consider the upgrade scenario of moving to a higher level of code; if all data was virtualised through one array, you would want to be darn sure that both the upgrade process and the new code are going to work seamlessly...
The final option is to use fabric-based virtualisation and at the moment this means Invista and SVC. SVC is an interesting one as it isn't an array and it isn't a fabric switch, but it does effectively provide switching capabilities. Although I think SVC is a good product, there are inevitably going to be some drawbacks, most notably those similar issues to array-based virtualisation (Barry/Tony, feel free to correct me if SVC has a non-disruptive replacement path).
I would argue that the IBM System Storage SAN Volume Controller (SVC) is more like the HDS USP, and less like the Invista. Both SVC and USP provide a common look and feel to the application server, both provide additional cache to external disk, both are able to provide a consistent set of copy services.
IBM designed the SVC so that upgrades can occur non-disruptively. You can replace the hardware nodes, one node at a time, while the SVC system is up and running, without disruption to reading and writing data on virtual disk. You can upgrade the software, one node at a time, while the SVC system is up and running, without disruption to reading and writing data on virtual disk. You can upgrade the firmware on the managed disk arrays behind the SVC, again, without disruption to reading and writing data on virtual disk.
More importantly, SVC has the ultimate "un-do" feature. It is called "image mode". If for any reason you want to take a virtual disk out of SVC management, you migrate over to an "image mode" LUN, and then disconnect it from SVC. The "image mode" LUN can then be used directly, with all the file system data in tact.
I define "virtualization" as technology that makes one set of resources look and feel like a different set of resources with more desirable characteristics. For SVC, the more desirable characteristics include choice of multi-pathing driver, consistent copy services, improved performance, etc. For EMC Invista, the question is "more desirable for whom?" EMC Invista seems more designed to meet EMC's needs, not its customers. EMC profits greatly from its EMC PowerPath multi-pathing driver, and from its SRDF copy services, so it appears to have designed a virtualization offering that:
Continuesthe use of EMC Powerpath as a multi-pathing driver. SVC supports driversthat are provided at no charge to the customer, as well as those built-in to each operating system like MPIO.
and, continuesthe use of Array-based copy services like SRDF of the underlying disk. SVC providesconsistent copy services regardless of storage vendor being managed.
A post from Dan over at Architectures of Control explains the anti-social nature of public benches. City planners, in an effort to discourage homeless people from sleeping on benches in parks or sidewalks, design benches that are so uncomfortableto use, that nobody uses them. These included benches made of metal that are too hot or too cold during certainmonths, benches slanted at an angle that dump you on the ground if you lay down, or benches that have dividers sothat you must be in an upright seated position to use.
This is not a disparagement of split-path switch-based designs. Rather, EMC's specific implementation appears to be designed for it to continuevendor lock-in for its multi-pathing driver, continuevendor lock-in for its copy services when used with EMC disk, and only provide slightly improved data migration capability for heterogeneous storage environments. Other switch-based solutions, such as those from Incipient or StoreAge, had different goals in mind.
Sadly, my IBM colleague BarryW and I have probably spent more words discussing Invista than all eleven EMC bloggers combined this year. While everyone in the industry is impressed how often EMC can sell "me, too" products with an incredibly large marketing budget, EMC appears not to have set aside funds for the Invista.
If a customer could design the ideal "storage virtualization" solution that would provide them the characteristics they desire the most from storage resources, it would not be anything like an Invista. While there are pros and cons between IBM's SVC and HDS's TagmaStore offerings, the reason both IBM and HDS are the market leaders in storage virtualization is because both companies are trying to provide value to the customer, just in different ways, and with different implementations.
When new technologies are introduced to the marketplace, it is normal for customers to be skeptical.
My sister is a mechanical engineer, so when she needs to configure a part or component, she candesign it on the computer, and then use a "Rapid Prototyping Machine"that acts like a 3D printer, to generate a plastic part that matches the specifications. Some machinesdo this by taking a hunk of plastic and cutting it down to the appropriate shape, and others use glue andpowder to assemble the piece.
But not everything is that simple. Harry Beckwith deals with the issue of selling services and software featuresin his book "Selling the Invisible". How do you sell a service before it is performed? How do you sell a softwarefeature based on new technology that the customer is not familiar with?
Our good friends over at NetApp, our technology partners for the IBM System Storage N series, developed a"storage savings estimator" tool that can provide good insight into the benefits of Advanced Single InstanceStorage (A-SIS) deduplication feature.
I decided to run the tool to analyze my own IBM Thinkpad C: drive (Windows operating system and programs) and D: drive ("My Documents" folder containing all my data files) to see how much storage savings thetool would estimate. Here are my results:
WINXP-C-07G (C: drive)Total Number of Directories: 1272Total Number of Files: 56265Total Number of Symbolic Links: 0Total Number of Hard Links: 41996Total Number of 4k Blocks: 2395884Total Number of 512b Blocks: 18944730Total Number of Blocks: 2395884Total Number of Hole Blocks: 290258Total Number of Unique Blocks: 1611792Percentage of Space Savings: 20.61Scan Start Time: Wed Sep 5 14:37:06 2007Scan End Time: Wed Sep 5 14:53:51 2007
WINXP-D-07H (D: drive)Total Number of Directories: 507Total Number of Files: 7242Total Number of Symbolic Links: 0Total Number of Hard Links: 11744Total Number of 4k Blocks: 3954712Total Number of 512b Blocks: 31610595Total Number of Blocks: 3954712Total Number of Hole Blocks: 3204Total Number of Unique Blocks: 3524605Percentage of Space Savings: 10.79Scan Start Time: Wed Sep 5 14:21:16 2007Scan End Time: Wed Sep 5 14:34:30 2007
I am impressed with the results, and have a better understanding of the way A-SIS works. A-SIS looks at every4kB block of data, and creates a "fingerprint", a type of hash code of the contents. If two blocks have different "fingerprints", then the contents are known to be different. If two blocks have the same fingerprint, it is mathematically possible for them to be unique in content, so A-SIS schedules a byte-for-byte comparison to be sure they are indeed the same. This might happen hours after the block is initially written to disk, but is a much safer implementation, and does not slow down the applications writing data.
(In an effort to provide support "real time" as data was being written, earlier versions of deduplication
had to either assume that a hash collision was a match, or take time to perform the byte-for-byte comparisonrequired during the write process. Doing this byte-for-byte comparison when the device is the busiest doingwrite activities causes excessive undesirable load on the CPU.)
The estimator tool runs on any x86-based Laptop, personal computer or server, and can scan direct-attached, SAN-attached, or NAS-attached file systems. If you are a customer shopping around for deduplication, ask your IBM pre-sales technical support, storage sales rep, or IBM Business Partner to analyze your data. Tools like this can help make a simple cost-benefit analysis: the cost of licensing the A-SIS software feature versus the amount of storage savings.
Wrapping up my week's theme of "diversity", with posts on a diverse set of topics,today I will suggest ways to spendyour time while you are walking 10,000 steps per day, as recommended by the authorsof the book "You: On a Diet".
(If you thought this was about the 10,000 steps it might take to implement a storage solution, you should switch over to IBM as your storage vendor. For example, the DS3200 and DS3400 can beimplemented in as little as SIX steps. That's pretty cool.)
Blogs like Lifehacker are an excellent resource for neat littletips and tricks to help you throughout your day, like how to use your iPod, cell phone or computer better, for example. These suggestions are based on the idea that you can walk your 10,000 steps with access to an iPod and cell phone.
Learning a language
... or refreshing yourself on a language you might not have spoken in a while. In addition to formal audio-based lessons from Pimsleur, there are podcasts you can get for various languages. In preparation for my upcoming trip to Japan and China, I have been listening to JapanesePod101.com and ChinesePod.com which have quick lessons that complement the formal training.This Lifehacker postindicates there are similar ones for French, Spanish, Italian, and Brazillian Portuguese.
Practicing your presentation
Walking while practicing your 30-60 minute presentation would be good exercise.MicroPersuasion explains how to turn your iPod into the ultimate PowerPoint accessory, and this article in PlayListmag.com providesthe steps to get a PowerPoint presentation onto your iPod. I did this, and the slides are found underPhotos->Photo Library. The images are small, but heck, they are your charts and you should recognize themwell enough to remind yourself what to say on each slide.Also, I am able to record my practice sessions using MP3 Recorder and listen as I page through each slide. (In theory, you can use your iPod to present your slides to your audience, plugging the iPod directly into the laptop projector, instead of a laptop, using cables available at your local Apple store, and use the iPod controls as your forward/backward remote.)
Working your To-Do list
You can download your to-do list to your iPod. I use BackPackIt from 37 Signals. You can sign up for a free account, or upgrade to a paid account, and have anamazingly simple browser-based tool to develop your to-do lists, one for each project or aspect of your life. Oncedone, the list can be emailed to you as plain text. Enable your iPod as an "external disk drive" and copy this text file to your NOTES directory on the iPod drive. Voila! You can now read your to-do list! (I could also send it to my cell phone, using email@example.com, but I find the iPod easier to read and navigate)
Think of something to add? Send an email from your cell phone. With BackPackit, I can send an email that will directly add my text as a note or todo list item. On my phone, this is simply sending a text message to "500" with text like:
"firstname.lastname@example.org todo # buy bread".
The hash mark (#) separates the subject line from the body of the email, and this is how Backpackit knows its a todo item or a note. If you pre-program the huge email address in advance on your phone, then it isn't as bad as it looks. It will be on your packpackit page the next time you log in.
Well, that's three suggestions. The next time you complain that there is no time to walk, you now have no excuse.
In general, people agree that IBM, HP and EMC are the top three vendors in storage,with HDS, Sun and Dell rounding out the top six.
The fun begins when a respected analyst like IDC Corp. publishes their calculations,and individual vendors re-swizzle the results because they are not happy with theirfindings.
I thought it would be helpful to illustrate how this all works. First, you need to comeup with a defintion of what you are going to count. You could count units sold, revenue dollars, or capacity Terabytes, or some other generally accepted metric.
Next, you need to define what's in and what's out. For example, you can say "storage"which would include both disk drives and tape drives, both internal to servers, orexternal to servers, or you can choose a more narrow definition, say external disksystems, which might suit you better if you aren't in the tape business, and don't sell servers.
By some definitions, my Apple iPod, Motorolla cell phone, and Canon digital camera,could all be counted as external disk systems, as they all connect via USB cableto my IBM laptop, and act like a disk drive to my Windows operating system, allowingme to read and write data back and forth. It is necessary to define exactly what you plan to include,and what to exclude, based on the reported numbers available.
The last rule is that nothing gets double-counted. In our complicated industry ofmanufacturers and vendors, sometimes storage is manufactured by one company, but soldby another, typically under the vendor's brand, not the manufacturer's brand. Youcan either count manufactured units, or vendor units, but you can't mix and match.
IBM is both manufacturer and vendor. However, IDC only counts vendor units, so storagemanufactured by someone else, but sold by IBM is counted as IBM, and storage manufacturedby IBM but branded by someone else goes to that other vendor. Likewise, HP and Sun re-brandHitachi storage, and Dell re-brands EMC storage.
EMC would like to treat all EMC-manufactured storage re-branded by Dell as EMC vended storage,so that it can move up in the ratings. But Dell wants to count it too, so that it can appearin the top six. You can't have it both ways.
But are these ratings just "bragging rights"? Not always. When big purchases are planned fornew projects, or a client decides its time to throw out the current vendor and shop for a newone, the ratings could influence that decision. In that regard, IDC 4Q05 Storage Tracker reportedIBM as number one over all in storage hardware at the end of 2005, which includes both internal and external disk systems, as well as tape drives sold under the IBM brand, based on dollar revenues. By this method of counting, HP came in at number 2, EMC at number 3, and the rest round out thetop six as before.
In the end, this is just one factor when deciding which brand to choose for your storage needs.
This month (September, 2006) marks our 50th anniversary of the disk system. The first disk system was the 350 Disk Storage Unit, designed to attach to the IBM 305 RAMAC mainframe computer, both introduced to the world in September, 1956.
Tonight PBS plans to air Season 38, Episode 6 of NOVA, titled [Smartest Machine On Earth]. Here is an excerpt from the station listing:
"What's so special about human intelligence and will scientists ever build a computer that rivals the flexibility and power of a human brain? In "Artificial Intelligence," NOVA takes viewers inside an IBM lab where a crack team has been working for nearly three years to perfect a machine that can answer any question. The scientists hope their machine will be able to beat expert contestants in one of the USA's most challenging TV quiz shows -- Jeopardy, which has entertained viewers for over four decades. "Artificial Intelligence" presents the exclusive inside story of how the IBM team developed the world's smartest computer from scratch. Now they're racing to finish it for a special Jeopardy airdate in February 2011. They've built an exact replica of the studio at its research lab near New York and invited past champions to compete against the machine, a big black box code -- named Watson after IBM's founder, Thomas J. Watson. But will Watson be able to beat out its human competition?"
Like most supercomputers, Watson runs the Linux operating system. The system runs 2,880 cores (90 IBM Power 750 servers, four sockets each, eight cores per socket) to achieve 80 [TeraFlops]. TeraFlops is the unit of measure for supercomputers, representing a trillion floating point operations. By comparison, Hans Morvec, principal research scientist at the Robotics Institute of Carnegie Mellon University (CMU) estimates that the [human brain is about 100 TeraFlops]. So, in the three seconds that Watson gets to calculate its response, it would have processed 240 trillion operations.
Several readers of my blog have asked for details on the storage aspects of Watson. Basically, it is a modified version of IBM Scale-Out NAS [SONAS] that IBM offers commercially, but running Linux on POWER instead of Linux-x86. System p expansion drawers of SAS 15K RPM 450GB drives, 12 drives each, are dual-connected to two storage nodes, for a total of 21.6TB of raw disk capacity. The storage nodes use IBM's General Parallel File System (GPFS) to provide clustered NFS access to the rest of the system. Each Power 750 has minimal internal storage mostly to hold the Linux operating system and programs.
When Watson is booted up, the 15TB of total RAM are loaded up, and thereafter the DeepQA processing is all done from memory. According to IBM Research, "The actual size of the data (analyzed and indexed text, knowledge bases, etc.) used for candidate answer generation and evidence evaluation is under 1TB." For performance reasons, various subsets of the data are replicated in RAM on different functional groups of cluster nodes. The entire system is self-contained, Watson is NOT going to the internet searching for answers.
Continuing my quest to "set the record straight" about [IBM XIV Storage System] and IBM's other products, I find myself amused at some of the FUD out there. Some are almost as absurd as the following analogy:
Humans share over 50 percent of DNA with bananas. [source]
If you peel a banana, and put the slippery skin down on the sidewalk outside your office building, it couldpose a risk to your employees
If you peel a human, the human skin placed on the sidewalk in a similar manner might also pose similar risks.
Mr. Jones, who applied for the opening in your storage administration team, is a human being.
You wouldn't hire a banana to manage your storage, would you? This might be too risky!
The conclusion we are led to believe is that hiring Mr. Jones, a human being, is as risky as puttinga banana peel down on the sidewalk. Some bloggers argue that they are merely making a series of factual observations,and letting their readers form their own conclusions. For example, the IBM XIV storage system has ECC-protected mirrored cache writes. Some false claims about this were [properly retracted]using strike out font to show the correction made, other times the same statement appears in another post from the same blogger that[have not yet beenretracted] (Update: has now been corrected). Other bloggers borrow the false statement [for their own blog], perhaps not realizing theretractions were made elsewhere. Newspapers are unable to fix a previous edition, so are forced to publishretractions in future papers. With blogs, you can edit the original and post the changed version, annotated accordingly, so mistakes can be corrected quickly.
While it is possible to compare bananas and humans on a variety of metrics--weight, height, and dare I say it,caloric value--it misses the finer differences of what makes them different. Humans might share 98 percent withchimpanzees, but having an opposable thumb allows humans to do things that chimpanzeesother animals cannot.
Full Disclosure: I am neither vegetarian nor cannibal, and harbor no ill will toward bananas nor chimpanzees.No bananas or chimpanzees were harmed in the writing of this blog post. Any similarity between the fictitiousMr. Jones in the above analogy and actual persons, living or dead, is purely coincidental.
So let's take a look at some of IBM XIV Storage System's "opposable thumbs".
The IBM XIV system comes pre-formatted and ready to use. You don't have to spend weeks in meetings deciding betweendifferent RAID levels and then formatting different RAID ranks to match those decisions. Instead, you can start using the storage on the IBM XIV Storage System right away.
The IBM XIV offers consistent performance, balancing I/O evenly across all disk drive modules, even when performing SnapShot processing, or recovering from component failure. You don't have to try to separate data to prevent one workload from stealing bandwidth from another. You don't have to purchase extra software to determine where the "hot spots" are on the disk. You don't have to buy othersoftware to help re-locate and re-separate the data to re-balance the I/Os. Instead, you just enjoy consistentperformance.
The IBM XIV offers thin provisioning, allowing LUNs to grow as needed to accommodate business needs. You don'thave to estimate or over-allocate space for planned future projects. You don't have to monitor if a LUN is reaching80 or 90 percent full. You don't have to carve larger and larger LUNs and schedule time on the weekends to move thedata over to these new bigger spaces. Instead, you just write to the disk, monitoring the box as a whole, ratherthan individual LUNs.
The IBM XIV Storage System's innovative RAID-X design allows drives to be replaced with drives of any larger or smaller capacity. You don't have to find the exact same 73GB 10K RPM drive to match the existing 73GB 10K RPM drive that failed. Some RAID systems allow "larger than original" substitutions, for example a 146GB drive to replace a 73GB drive, but the added capacity is wasted, because of the way most RAID levels work. The problemis that many failures happen 3-5 years out, and disk manufacturers move on to bigger capacities and differentform factors, making it sometimes difficult to find an exact replacement or forcing customers to keep their own stockof spare drives. Instead, with the IBM XIV architecture, you sleep well at night, knowing it allows future drive capacities to act as replacements, and getting the full value and usage of that capacity.
In the case of IBM XIV Storage System, it is not clear whether
"Vendors" are those from IBM and IBM Business Partners, including bloggers like me employed by IBM,and "everybody else" includes IBM's immediate competitors, including bloggers employed by them.
-- or --
"Vendors" includes IBM and its competitors including any bloggers, so that "everybody else" refers instead to anyone not selling storage systems, but opinionated enough to not qualify as "objective third-party sources".
-- or --
"Vendors" includes official statements from IBM and its competitors, and "everybody else" refers to bloggerspresenting their own personal or professional opinions, that may or may not correspond to their employers.
That said, feel free to comment below on which of these you think the last two points of Steinhardt's rule istrying to capture. Certainly, I can't argue with the top two: a customer's own experience and the experiencesof other customers, which I mentioned previously in my post[Deceptively Delicious].
In that light, here is a 5-minute video on IBM TV with a customer testimonial from the good folksat [NaviSite], one of our manycustomer references for the IBM XIV Storage System.
Last July, IBM and EMC traded blog postings over SPC-1 benchmark results. Fellow EMC bloggerChuck Hollis wrote his post [Does Anyone Take The SPC Seriously?]. Here is an excerpt:
I think most storage users have figured this out. We've never done an SPC test, and probably will never do one. Anyone is free, however, to download the SPC code, lash it up to their CLARiiON, and have at it.
I responded with [Getting Under EMC Skin], and then followed up with a series explaining IBM SVC and SPC benchmarks here:
So what is the good news?Yesterday, our friends at NetApp took up Chuck's challenge and posted results on their FAS3040 as well as their EMC CLARiiON devices. IBM sells the FAS3040 under the name IBM System Storage N5300 disk system. Knowing that NetApp maintains excellent performance when it is doing point-in-time copies, NetApp ran both with and without on both boxes. I include DS4700 and DS4800 as well for comparison purposes, but only have them without FlashCopy running.
NetApp FAS3040 (IBM N5300)
NetApp FAS3040 (IBM N5300)
EMC CLARiiON CX3-40
IBM DS4700 Express
EMC CLARiiON CX3-40
One would expect some performance degradation with a box running point-in-time copies at the same time it is reading and writing data, but NetApp/IBM N5300 does not degrade by much, but EMC's drops a significant amount.
So what is the bad news? Last October, I welcomed HDS USP-V to the [Super High-End Club], but now we need to invite Texas Memory Systems as well.In 2006, I posted [Hybrid, Solid State and the future of RAID], and poked fun at Texas Memory Systems using the slogan "World's Fastest Storage", which at the time that honor belonged to IBM SAN Volume Controller instead.The VP of Texas Memory Systems, Woody Hutsell, explained the only reason their solid-state disk system, RAMSAN-320, didn't have faster results is that they didn't have the fastest IBM server to run against it. It may not surprise you that nearly everyone's SPC benchmarks use IBM servers because IBM has the fastest servers as well. I didn't have a million-dollar System p UNIX server to send Woody for this, but it looks like they have finally gotten one, and a new RAMSAN-400 device, as they have posted their latest results.
Texas Memory Systems RAMSAN-400
IBM SAN Volume Controller 4.2
EMC doesn't publish numbers for their Symmetrix box, despite their announcement of faster SSD drives. They claim that SSD drives make their overall disk system performance faster, but without SPC benchmarks, we will never know. If you have a Symmetrix, this YouTube video may help you decide where it belongs: