Well, it's Tuesday, and so it is "announcement day" again! Actually, for me it is Wednesday morning herein Mumbai, India, but since I was "press embargoed" until 4pm EDT in talking about these enhancements, I had to wait until Wednesday morning here to talk about them.
- World's Fastest 1TB tape drive
|IBM announced its new enterprise [TS1130 tape drive]and corresponding [TS3500 tape library support]. This one has a funny back-story. Last week while we were preparing the Press Release, we debated on whether we should compare the 1TB per cartridge capacity as double that of Sun's Enterprise T10000 (500GB), or LTO-4 (800GB). The problem changed when Sun announced on Monday they too had a 1TB tape drive, so now instead ofsaying that we had the "World's First 1TB tape drive", we quickly changed this to the "World's Fastest 1TB tape drive" instead. At 160MB/sec top speed, IBM's TS1130 is 33 percent faster than Sun's latest announcement. Sun was rather vague when they will actually ship their new units, so IBM may still end up being first to deliver as well.|
Here is an IBM podcast to hear more about it:
While EMC and other disk-only vendors have stopped claiming that "tape is dead", these recent announcements from IBM and Sun indicate that indeed tape is alive and well. IBM is able to borrow technologies from disk, such as the Giant Magneto Resistive (GMR) head over to its tape offerings, which means much of the R&D for disk applies to tape, keeping both forms ofstorage well invested. Tape continues to be the "greenest" storage option, more energy efficient than disk, optical, film, microfiche and even paper.
- Improved Reporting
On the LTO front, IBM enhanced the reporting capabilities of its[TS3310] midrange tape library. This includes identifying the resource utilization of the drives, reporting on media integrity, and improved diagnostics to support library-managed encryption.
- IBM System Storage DR550
As a blended disk-and-tape solution, the [IBM System Storage DR550] easily replaces the EMC Centera to meet compliance storagerequirements. IBM announced that we have greatly expanded its scalability, being able to support both 1TBdisk drives, as well as being able to attach to either IBM or Sun's 1TB tape drives.
- Massive Array of Idle Disks (MAID)
IBM now offers a "Sleep Mode" in the firmware of the [IBM System Storage DCS9550], which is often called "Massive Array of Idle Disks" (MAID) or spin-down capability. This can reduce the amount of power consumed during idle times.
That's a lot of exciting stuff. I'm off to breakfast now.
technorati tags: IBM, TS1130, TS3500, tape, systems, 1TB, drive, library, LTO, LTO-4, TS3310, Charlie Andrews, DR550, MAID, DCS9550, Sleep Mode, Sun, EMC
Well, it's Tuesday again, and we had several announcements this month, so here is a quick recap.We had some things announce May 13, and then some more announcements today, but since I was busywith conferences, will combine them into one post for the entire month of May 2008.
This time, I thought I would go "audio" with a recording from Charlie Andrews, IBM director ofproduct marketing for IBM System Storage:
If you are unable to listen, you can read the details for each here:
Also today IBM announced special 5-packs for LTO-4 and DDS-6 tape cartridge media. Here is the Press Release.
technorati tags: IBM, Charlie Andrews, TS7530, VTL, N series, NAS, disk system, LTO-4, DDS-6, tape, media, cartridge
Well, its Tuesday, and that means more IBM announcements!!!
Let's do a quick recap of what was announced for storage:
- Disk Systems
We now support 1000GB SATA-II drives in the DS4000 series. This is available for the DS4200 model 7V, DS4700, DS4800 as well as the expansion drawers EXP420 and EX810. When I asked our marketing team why we weren't going to say "1TB" like everyone else, they thought 1000GB sounds bigger. I guess I should not have asked that on April Fool's day. For more details, see the IBM press releases for the [DS4200/EXP420and DS4700/DS4800/EXP810].
- Tape Systems
IBM announced new machine code Release 1.4a for the The IBM Virtualization Engine™ TS7700 virtual tape library for our System z mainframe customers.Various features come with this new level of machine code. See the IBM [Press Release] for more details.
- Load balancing across the grid
- Host control over the copy of logical volumes on a cluster by cluster basis
- Option to gracefully remove an individual cluster from an existing grid
- Initial-state reset for TS7700 database for cluster cleanup
- Option to upgrade single-cache to dual-cache configuration
Also announced were updates to the 7214 model 1U2. Technically this is not in the IBM System Storage product line,but instead is designed specifically for our System p server line. This is a "media drawer" that allows you to havetape on one side, and optical on the other, in a single enclosure. IBM announced that you can now have DAT160 80GBdrives that is read-write compatible with DAT72 and DDS4 drives, and half-high LTO-4 drives that can read LTO-2 media, and is read-write compatible with LTO-3 media.Read the IBM [Press Release] for details.
Finally, if you are in the United States, Canada or the Carribean, there is a special discount promotionfor tape libraries purchased before June 20, 2008. This includes IBM TS3100, TS3200, TS3310 and TS3500 libraries.See the [Promotion Details] for eligibility.
- Storage Software
IBM has added capability to the IBM TotalStorage Productivity Center for Replication. A quick review of the differentoptions for this component.
- base Replication (uni-directional from primary to disaster site)
- Two-site replication (bi-directional, including failover and failback)
- Three-site replication (site awareness for all the copy sessions between all three sites in all situations)
Productivity Center for Replication supported all these levels for DS8000, DS6000 and ESS 800 disk models, butfor SVC it only supported FlashCopy and Metro Mirror for the uni-directional base. IBM announced version 3.4 today that has added support for SVC for Global Mirror (asynchronous disk mirroring) and bi-directional failover/failback. This supports lets you have "practice volumes" that allow IT managers to perform "disaster recovery exercises" without disrupting production workloads.
Also, for the DS8000, there is support for the new Space Efficient FlashCopy and DynamicVolume Expansion features. Here is the IBM
The Productivity Center for Replication server can run on either a Windows/Linux-x86 server or a z/OS mainframe server.The Productivity Center for Replication on System z offers all the same new support for SVC and DS8000, as well asincorporated Basic HyperSwap capability that I mentioned in my post last February[DS8000 Enhancements for the IBM System z10 EC].
Here are the IBM press releases for the TotalStorage Productivity Center for Replication on[Windows/Linux-x86and System z] servers.
I'm at a Business Partner conference today, discussing these announcements and other topics, so need to go back to those festivities.
technorati tags: IBM, SATA, SATA-II, 1000GB, 1TB, DS4000, DS4200, DS4700, DS4800, EXP420, EXP810, TS7700, TS7740, R1.4a, grid, cluster, 7214-1U2, DAT160, DAT72, DDS4, LTO-2, LTO-3, LTO-4, TS3100, TS3200, TS3310, TS3500, discount, promotion, Productivity Center, Replication, two-site, three-site, failover, failback, SVC, DS8000, DS6000, ESS800, Windows, Linux, z/OS, System z, z10 EC
Well it's Tuesday, which means its time to look at recent announcements.While I was on vacation last week, IBM made a lot of storage announcements October 23.Josh Krischer gives his summary on WikiBon [October 2007 Review
].Austin Modine of the The Register
went so far as to say that [IBM goes crazy with storage system updates
- IBM System Storage DS8000 series
This is "Release 3" software/microcode upgrades on our existing "Turbo" hardware.
- IBM FlashCopy SE -- Here "SE" stands for Space Efficient. Rather than allocating a full 100% of the space for the FlashCopy destination, you can set aside just a fraction, and this will hold all the changed blocks, similar to whatIBM already offers on the DS4000 series.
- Dynamic Volume Expansion -- In the past, if you needed more space for a LUN, you had to carve out a newer one elsewhere, and then copy the data over from the old to the new, leaving the old LUN around to be re-used or leftstranded. With this enhancement, you can just upgrade the LUN in place, making it bigger as needed, similar to whatIBM already offers on the DS4000 series and SAN Volume Controller. This applies to CKD volumes for the System zmainframe users out there as well.
- Storage Pool Striping -- striping volumes across RAID ranks to eliminate or reduce hot-spots, and provide betterload balancing. Many used SAN Volume Controller in front of the DS8000 to do this, but now you can do it natively inthe DS8000 itself.
- z/OS Global Mirror Multiple Reader -- for System z customers, "z/OS Global Mirror" is the new name for XRC. Thisenhancement improves the throughput of sending updates to the remote disaster recovery location.
- DS Storage Manager enhancements, the element manager software has been enhanced, and is pre-installed on the new IBM System Storage Productivity Center, which I will talk about below.
- Intermix of DS8000 machine types -- this is especially useful to allow new frames to have co-terminating warrantieswith the base units. In other words, as you expand your system, you can ensure that the entire chunk of iron runs outof warranty all at the same time, to simplify your decision making process to upgrade or contract for extended service.
See the [DS8000 Announcement Letter] for more details.
- IBM System Storage SAN Volume Controller 4.2.1
BarryW summarizes the updates in the[Announced SVC 4.2.1] release.If you have problems with the link he provides in his post, here is the [SVC 4.2.1 Announcement Letter].
- IBM System Storage Productivity Center
One of the biggest complaints about IBM TotalStorage Productivity Center is that it is software that needs to beinstalled on its own server, and that this installation process can take a day or two. Why wait? Now you can havea hardware console that has the DS8000 Storage Manager software, SVC Admin Console software, and IBM TotalStorageProductivity Center "Basic Edition" pre-installed. Here are the key features.
- Pre-installed and tested console
- DS8000 R3 GUI integration
- Cohabitation of SVC 4.2.1 GUI and CIMOM
- Automated device discovery
- Asset and capacity reporting, including tape library support
- Device configuration
- Advanced topology viewer
See the[System Storage Productivity Center - Announcement letter] for more details."Basic Edition" can be upgraded to "Standard Edition" to get full functionality.
- IBM System Storage N series
Our "Release 9" applies across the board, from N3000 to N5000 to N7000 series models, includingnew host bus adapters, and the new Data OnTAP 7.2.4 release level.
The Virtual File Manager (VFM) was announced as one of our latest [Storage Virtualization Solutions]. VFMprovides a global namespace that aggregates the file systems from Linux, UNIX, and Windows file servers, as well asN series storage, into a consolidated environment.
See the [N series Announcement Letter] for more details.
- IBM TS7520 Virtualization Engine
IBM's virtual tape library (VTL) for the distributed systems platform, has been enhanced to provide:
- Up to 12TB of disk cache, using 750GB SATA disk.
- F05 Tape Frames installed as TS7520 base units through a 32 port fibre channel switch
- Support for LTO generation 4 tape drives, both as virtual tape drives and as physical tape drives within IBM automated tape libraries attached to the TS7520. This allows you to use Encryption capabilities of LTO4.
See the [TS7520 Announcement Letter] for more details.
- IBM System Storage DS6000 series
The latest 300GB 15K RPM drives are now supported.
- IBM System Storage DS4000 series
This was a software/microcode upgrade release for the DS4000 series.
- RAID-6 support on the DS4700 Express models and the DS4200 Model 7V
- Support for greater than 2 TB volumes on selected supported operating systems
- 8K cache block size
- DS4000 Storage Manager v10.10 increases the number of FlashCopy tasks, remote mirror pairs, and storage partitions.
See the [DS4000 Announcement Letter] for more details.
- IBM System Storage DS3000 series
DS3000 series now supports SATA disk, and can be attached to AIX and Linux on System p servers. This appliesto the DS3200, DS3300 and DS3400 models.See the [DS3000 Announcement Letter] for more details.
- IBM System Storage TS2240
These are LTO4 Half-High drives, which can support encryption.See the [TS2240 Announcement Letter] for details.
Perhaps Austin is right, we might have gone crazy announcing all of this at once.
technorati tags: Josh Krischer, Austin Modine, IBM, DS8000, Turbo, FlashCopy, SE, space efficient, dynamic volume expansion, DVE, striping, z/OS Global Mirror, XRC, System Storage, Productivity Center, TotalStorage, Basic Edition, topology viewer, ONTAP, VFM, global namespace, TS7520, Virtualization Engine, virtual tape library, VTL, F05, SATA, LTO, LTO4, LTO-4, DS6000, DS4000, RAID6, RAID-6, AIX, Linux, System p, servers, TS2240, half-high, drives
Well, it is Tuesday, and that means IBM announcements. This week many of my colleagues are attending Storage Networking World [SNW
] conference. Normally, the most exciting announcements are reserved for the weeks these conferences are held, but IBM apparently made an exception this week.
- New Factory configurations for XIV
The first announcement is for new [factory configurations] for the IBM XIV disk system. In the past, you could only order a partial 6-module or a full 15-module rack. Today, IBM announced that there will also be 9-, 10-, 11-, 12-, 13- and 14-module configurations orderable as well.
Some FUD out in the blogosphere led some to believe that these partial configurations had to be made full 15 modules within 12 months. That is false. You can order any of these partial rack configurations and leave them as is until you need more capacity. There is no obligation to buy more capacity with these partial rack configurations.
- IBM N series N6060 configurations
This second announcement indicates that the N6060 supports[672 drives]. The N6060 is the latest midrange model of IBM N series unified storage.
If you are asking "What is a 672 drive?" don't feel stupid. It actuallyrefers to the number of external drives that can be attached to the N6060. Previously, it was mis-reported that the N6060 could support as many as 840 drives, but this was not correct, and this announcement is to fixthat typo.
- IBM Passport Advantage Sub-Capacity Licensing
This last announcement today relates to IBM Passport Advantage[sub-capacity licensing].Pricing products is always a challenge. You want to come up with a pricing methodology such that people who get the most use pay the most, and those who get less pay less, in a manner that everyone thinks is fair. With commodities, it is simple to price rice by the pound, or fabric by the yard, but what about IT solutions?
Some of the IBM software is based on number of processors used, so that people who have the software running on multiple machines, or machines with multiple cores, should pay more because they are getting more value. This makes sense if this software is the only thing running on that server, but today you can also have server virtualization and are running many guest operating systems, each with different applications. The solution is to use "sub-capacity" licensing. If you have a quad-core processor server, but have four guest operating systems using 25 percent of this, then each OS should only pay for one processor's worth of licensing. Since different processors have different clock speeds, IBM has standardized the calculations to a mythical "Processor Value Unit" or PVU, with a corresponding IBM License Metric Tool (ILMT).
Initially, this will cover specific versions of Citrix Xen Server, Microsoft Hyper-V and VMware, but IBM has made as a "statement of direction" that it will extend this sub-capacity licensing and ILMT support to IBM PowerVM capability for its POWER systems.
I have often heard clients complain that their third party software vendor does not support these hypervisors. Sometimes, this means the third party vendor will not fix or provide assistance if the problem occurs in this environment, and other times, it is that the pricing does not favor this environment, you get charged for all the processors, even if your slice of the processor is much smaller.
If you are at SNW this week, stop by and say "Hi" to my fellow IBM collegues for me.
technorati tags: IBM, SNW09, XIV, N6060, PVU, ILMT, Citrix, Xen, Hyper-V, VMware, ILMT