Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
Based on this success, and perhaps because I am also fluent in Spanish, I was asked to help with Proyecto Ceibal, the team for OLPC Uruguay. Normally theXS school server resides at the school location itself, so that even if the internet connection is disrupted or limited, the school kids can continue to access each other and the web cache content until internet connection is resumed.However, with a diverse developmentteam with people in United States, Uruguay, and India, we first looked to Linux hosting providers that wouldagree to provide free or low-cost monthly access. We spent (make that "wasted") the month of May investigating.Most that I talked to were not interested in having a customized Linux kernel on non-standard hardware on their shop floor, and wanted instead to offer their own standard Linux build on existing standard servers, managed by theirown system administrators, or were not interested in providing it for free. Since the XS-163 kernel is customizedfor the x86 architecture, it is one of those exceptions where we could not host it on an IBM POWER or mainframe as a virtual guest.
This got picked up as an [idea] for the Google's[Summer of Code] and we are mentoring Tarun, a 19-year-old student to actas lead software developer. However, summer was fast approaching, and we wanted this ready for the next semester. In June, our project leader, Greg, came up with a new plan. Build a machine and have it connected at an internet service provider that would cover the cost of bandwidth, and be willing to accept this with remote administration. We found a volunteer organization to cover this -- Thank you Glen and Vicki!
We found a location, so the request to me sounded simple enough: put together a PC from commodity parts that meet the requirements of the customizedLinux kernel, the latest release being called [XS-163]. The server would have two disk drives, three Ethernet ports, and 2GB of memory; and be installed with the customized XS-163 software, SSHD for remote administration, Apache web server, PostgreSQL database and PHP programming language.Of course, the team wanted this for as little cost as possible, and for me to document the process, so that it could be repeated elsewhere. Some stretch goals included having a dual-boot with Debian 4.0 Etch Linux for development/test purposes, an alternative database such as MySQL for testing, a backup procedure, and a Recover-DVD in case something goes wrong.
Some interesting things happened:
The XS-163 is shipped as an ISO file representing a LiveCD bootable Linux that will wipe your system cleanand lay down the exact customized software for a one-drive, three-Ethernet-port server. Since it is based on Red Hat's Fedora 7 Linux base, I found it helpful to install that instead, and experiment moving sections of code over.This is similar to geneticists extracting the DNA from the cell of a pit bull and putting it into the cell for a poodle. I would not recommend this for anyone not familiar with Linux.
I also experimented with modifying the pre-built XS-163 CD image by cracking open the squashfs, hacking thecontents, and then putting it back together and burning a new CD. This provided some interesting insight, but in the end was able to do it all from the standard XS-163 image.
Once I figured out the appropriate "scaffolding" required, I managed to proceed quickly, with running versionsof XS-163, plain vanilla Fedora 7, and Debian 4, in a multi-boot configuration.
The BIOS "raid" capability was really more like BIOS-assisted RAID for Windows operating system drivers. This"fake raid" wasn't supported by Linux, so I used Linux's built-in "software raid" instead, which allowed somepartitions to be raid-mirrored, and other partitions to be un-mirrored. Why not mirror everything? With two160GB SATA drives, you have three choices:
No RAID, for a total space of 320GB
RAID everything, for a total space of 160GB
Tiered information infrastructure, use RAID for some partitions, but not all.
The last approach made sense, as a lot of of the data is cache web page images, and is easily retrievable fromthe internet. This also allowed to have some "scratch space" for downloading large files and so on. For example,90GB mirrored that contained the OS images, settings and critical applications, and 70GB on each drive for scratchand web cache, results in a total of 230GB of disk space, which is 43 percent improvement over an all-RAID solution.
While [Linux LVM2] provides software-based "storage virtualization" similar to the hardware-based IBM System Storage SAN Volume Controller (SVC), it was a bad idea putting different "root" directories of my many OS images on there. With Linux, as with mostoperating systems, it expects things to be in the same place where it last shutdown, but in a multi-boot environment, you might boot the first OS, move things around, and then when you try to boot second OS, it doesn'twork anymore, or corrupts what it does find, or hangs with a "kernel panic". In the end, I decided to use RAIDnon-LVM partitions for the root directories, and only use LVM2 for data that is not needed at boot time.
While they are both Linux, Debian and Fedora were different enough to cause me headaches. Settings weredifferent, parameters were different, file directories were different. Not quite as religious as MacOS-versus-Windows,but you get the picture.
During this time, the facility was out getting a domain name, IP address, subnet mask and so on, so I testedwith my internal 192.168.x.y and figured I would change this to whatever it should be the day I shipped the unit.(I'll find out next week if that was the right approach!)
Afraid that something might go wrong while I am in Tokyo, Japan next week (July 7-11), or Mumbai, India the following week (July 14-18), I added a Secure Shell [SSH] daemon that runs automaticallyat boot time. This involves putting the public key on the server, and each remote admin has their own private key on their own client machine.I know all about public/private key pairs, as IBM is a leader in encryption technology, and was the first todeliver built-in encryption with the IBM System Storage TS1120 tape drive.
To have users have access to all their files from any OS image required that I either (a) have identical copieseverywhere, or (b) have a shared partition. The latter turned out to be the best choice, with an LVM2 logical volumefor "/home" directory that is shared among all of the OS images. As we develop the application, we might findother directories that make sense to share as well.
For developing across platforms, I wanted the Ethernet devices (eth0, eth1, and so on) match the actual ports they aresupposed to be connected to in a static IP configuration. Most people use DHCP so it doesn't matter, but the XSsoftware requires this, so it did. For example, "eth0" as the 1 Gbps port to the WAN, and "eth1/eth2" as the two 10/100 Mbps PCI NIC cards to other servers.Naming the internet interfaces to specific hardware ports wasdifferent on Fedora and Debian, but I got it working.
While it was a stretch goal to develop a backup method, one that could perform Bare Machine Recovery frommedia burned by the DVD, it turned out I needed to do this anyways just to prevent me from losing my work in case thingswent wrong. I used an external USB drive to develop the process, and got everything to fit onto a single 4GB DVD. Using IBM Tivoli Storage Manager (TSM) for this seemed overkill, and [Mondo Rescue] didn't handle LVM2+RAID as well as I wanted, so I chose [partimage] instead, which backs up each primary partition, mirrored partition, or LVM2 logical volume, keeping all the time stamps, ownerships, and symbolic links in tact. It has the ability to chop up the output into fixed sized pieces, which is helpful if you are goingto burn them on 700MB CDs or 4.7GB DVDs. In my case, my FAT32-formatted external USB disk drive can't handle files bigger than 2GB, so this feature was helpful for that as well. I standardized to 660 GiB [about 692GB] per piece, sincethat met all criteria.
The folks at [SysRescCD] saved the day. The standard "SysRescueCD" assigned eth0, eth1, and eth2 differently than the three base OS images, but the nice folks in France that write SysRescCD created a customized[kernel parameter that allowed the assignments to be fixed per MAC address ] in support of this project. With this in place, I was able to make a live Boot-CD that brings up SSH, with all the users, passwords,and Ethernet devices to match the hardware. Install this LiveCD as the "Rescue Image" on the hard disk itself, and also made a Recovery-DVD that boots up just like the Boot-CD, but contains the 4GB of backup files.
For testing, I used Linux's built-in Kernel-based Virtual Machine [KVM]which works like VMware, but is open source and included into the 2.6.20 kernels that I am using. IBM is the leadingreseller of Vmware and has been doing server virtualization for the past 40 years, so I am comfortable with thetechnology. The XS-163 platform with Apache and PostgreSQL servers as a platform for [Moodle], an open source class management system, and the combination is memory-intensive enough that I did not want to incur the overheads running production this manner, but it wasgreat for testing!
With all this in place, it is designed to not need a Linux system admin or XS-163/Moodle expert at the facility. Instead, all we need is someone to insert the Boot-CD or Recover-DVD and reboot the system if needed.
Just before packing up the unit for shipment, I changed the IP addresses to the values they need at the destination facility, updated the [GRUB boot loader] default, and made a final backup which burned the Recover-DVD. Hopefully, it works by just turning on the unit,[headless], without any keyboard, monitor or configuration required. Fingers crossed!
So, thanks to the rest of my team: Greg, Glen, Vicki, Tarun, Marcel, Pablo and Said. I am very excited to bepart of this, and look forward to seeing this become something remarkable!