Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
IBM Announcements for November 2016
Well, it's Tuesday again, and you know what that means? IBM Announcements!
(OK, yes, today is Friday, but I was busy getting married on Tuesday, so IBM pushed the announcements out one day to Wednesday, and technically I am writing this blog post during my honeymoon vacation, so the IBM marketing team and my new wife both cut me some slack. Work/Life balance is all about compromises, right?)
IBM DS8880 Storage System
The IBM DS8880 comes in three models, the DS8884 entry level, the DS8886 enterprise level, and the DS8888 all-flash array. IBM offers 1, 2, 3 and 4 year warranties.
The new High Performance Flash Enclosure (HPFE) Gen2 delivers more capacity than Gen1. The 2U flash enclosures are configured in pairs with each enclosure supporting up to twenty-four 2.5-inch flash cards in capacities 400 GB, 800 GB, 1.6 TB and 3.2 TB.
The HPFE Gen2 are currently available for both the DS8884 and DS8886 models. The maximum flash capacity for the DS8886 increases from 96 TB to 614.4 TB, delivering reduced storage costs through lesser cost per IOPS with this new flash enclosure. IBM has made a statement of direction to offer these HPFE Gen2 on the DS8888 as well.
To improve security, IBM DS8880 now supports customer-defined digital certificates for authentication, and configurable Hardware Management Console (HMC) firewall support.
For IBM's mainframe clients, IBM now offers "Extents-level" space release support for z/OS®, DSCLI (Command Line Interface) support for z/OS environment, and FICON® Information Unit (IU) pacing improvements.
IBM Spectrum Virtualize™ V7.8 delivers support for the latest SAN Volume Controller, FlashSystem V9000 and Storwize® product family, and adds new software functionality and improvements
In conjunction with [IBM Spectrum Copy Data Management], Spectrum Virtualize v7.8 offers flexible data protection with transparent cloud tiering to leverage the cloud as FlashCopy targets and restore these snapshots from the cloud on select platforms.
However, the encryption keys are kept on USB thumb drives, which are either left in the USB ports on the back of the hardware, or locked away in a safe, only to be retrieved as needed when rebooting the systems or upgrading the firmware.
Now, IBM Spectrum Virtualize v7.8 supports the IBM Security Key Lifecycle Manager (SKLM) to manage encryption keys. IBM continues to support USB thumb drives if you prefer, but SKLM is used to manage keys for most of the rest of IBM products, and provides centralized management.
The SVC and Storwize models can directly attach via 12Gb SAS to expansion drawers. At the time, we supported 2U-high 12-bay that support Large Form Factor (LFF) 3.5-inch Nearline (7200 rpm) drives, and 2U-high 24-bay that support the Small Form Factor (SFF) 2.5-inch drives (SSD, 15K, 10K and 7200 rpm).
With Spectrum Virtualize v7.8, IBM now offers a third option, the 5U-high 92-bay that supports both LFF and SFF drives. This new expansion can be attached to Storwize V5000 Gen2, Storwize V7000 (models 524/Gen2 and 624/Gen2+), and SVC (models DH8 and SV1).
For the 12-bay and 92-bay, IBM now supports 10TB capacity 3.5-inch Nearline drives. For the 24-bay and 92-bay, IBM now supports 7.68 TB and 15.36 TB capacity Solid State Drives (SSD).
For those concerned about the phrase "lower endurance" in the press release, let me explain. SSD have a bit of extra capacity included. If you write the full capacity of the drive every day for a year, you will "burn up" about one percent of the capacity.
To handle ten "Full Drive Writes per Day" (10 FDWP) over the course of five years, IBM adds 50 percent extra spare capacity above the 400 GB, 800 GB, 1.6 TB and 3.2 TB capacities. So, a 400GB full-endurance drive is really 600 GB inside. These were sometimes referred to as "Enterprise" SSD.
For the larger device sizes, the IT industry has determined that 1 FDWP is sufficient, so instead of 50 percent spare capacity, IBM adds only 5 percent extra. The 7.68 TB is really 8.06 TB inside. These were earlier referred to as "Read-Intensive" SSD. These come in 1.92 TB, 3.84 TB, 7.68 TB and 15.36 TB capacities.
IBM is also offering non-disruptive model conversions. Storwize V5010 can now be converted to V5020, and V5020 can be converted to V5030. The Storwize V7000 Model 524 (Gen2) can be converted to model 624 (Gen2+).
The DeepFlash 150 is the perfect JBOF addition to the ESS family. The current ESS models had either 2U-high 24-drive bays, or 4U-high 60-drive bays. This new model is 3U-high with 64 high-capacity (8 TB) Board Solid State Drives (BSSD).
The ESS includes all the features of IBM Spectrum Scale, including both 8+2 and 8+3 Erasure Coding data protection. This provides file and object access to data, including POSIX compliance for Windows, Linux and AIX operating systems, as well as HDFS-compliant access for big data analytics.