Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
IBM launches updated offerings based on IBM Spectrum Virtualize
Well it's Tuesday again, and you know what that means? IBM announcements!
(For those wondering where I went in July, then perhaps the better question should be "where didn't I go?". I started in Boston, MA, then Iceland, England, Hungary, Romania, Qatar, Kenya, Dubai UAE, and finally Seattle, WA. Whew! This week, I am visiting clients in Tennessee.)
Today, IBM launches a whole set of updated offerings based on the IBM Spectrum Virtualize software code base.
IBM Spectrum Virtualize v7.7.1 software-only offering
Like the rest of the IBM Spectrum Storage family of products, IBM Spectrum Virtualize can now be purchased as software only, allowing you to install it on your own x86 servers, rather than purchasing pre-built systems from IBM.
The software license comes in two flavors. The traditional "perpetual license" allows you to move the software from one x86 server to another. Say after 4 years, you have depreciated the server, or the hardware components fail, and you want to get a newer server. This is the same perpetual license that clients with IBM SAN Volume Controller and Storwize family have enjoyed since 2003.
The other is a "monthly license", which allows you to stand up your own "SVC" using your own x86 servers, for a period of months needed for a development/test project, disaster recovery, or some other purpose. After the project is over, you can discontinue the license, and re-purpose the x86 servers for something else. This is especially handy for Managed Service Providers (MSP) and Cloud Service Providers (CSP), but certainly can prove useful in traditional datacenters as well. The "monthly licensing" option is also available for IBM SAN Volume Controller (SVC) as well.
The software license is based on Tebibyte [TiB]. For those not familiar with international standards, here is a comparison table:
The new SV1 model is based on two 8-core [Intel Broadwell] processors, which IBM has clocked at up to 30 percent performance improvement over the DH8 model. It also offers up to 256GB of cache memory per node, which sadly only the first 64GB are usable at the current software level. Someday, a future release of software will address all 256GB of memory.
The IBM SAN Volume Controller now offers "Enterprise Class Support" as an option. In the past, the SVC was a "customer setup" box, similar to midrange and entry-level products. Now, you can upgrade your support to match that of IBM DS8000 and XIV enterprise class offerings. This means that IBM experts will maintain your microcode levels for you.
The new 624 model is based on a single 10-core Intel Broadwell processor, which IBM has clocked at up to 45 percent performance improvement over the previous model. It also offers up to 128GB of cache memory per system, 64GB per node, double what came standard on the 524 model!
Why "Gen2+"? Moving from an 8-core Haswell to a 10-core Broadwell CPU, and doubling the cache memory didn't seem to be enough "architectural change" to justify calling it a "Gen3", so marketing decided on Gen2+ instead.
I refer to the IBM FlashSystem V9000 as my "Superman" product. When Superman dons on his glasses he becomes "Clark Kent", mild-mannered newspaper reporter. But behind the glasses, he is always Superman! Likewise, the FlashSystem V9000 is an all-flash array with an impressive set of features, but take off the fancy bezel, and you find that it is a pair of fully-loaded SAN Volume Controllers (which we call "Control Enclosures AC3") and a FlashSystem 900 drawer of the world's fastest flash storage.
The new FlashSystem V9000 is based on the new SV1 models of SVC. Each V9000 can attach up to 20 expansion enclosures over 12Gb SAS connections. The expansion enclosure can hold either 24 of the smaller 2.5-inch drives, or 12 of the larger 3.5-inch drives. Of course, the FlashSystem V9000 can also virtualize any of almost 400 different kinds of storage arrays, from all the major vendors, similar to SAN Volume Controller. This provides tiering options that match well with the FlashSystem 900 inside.
IBM Storwize V7000F and V5030F all-flash array models
The FlashSystem V9000 was originally going to be called the Storwize V9000, but the FlashSystem folks wanted to keep all of the "FlashCore" technology under one name. In perhaps a bit retaliation, or maybe sibling rivalry, the Storwize team added the letter "F" to refer to the All-flash models of the Storwize V7000F and V5030F.
The "flash" in the V7000F and V5030F are just Solid-state drives, not nearly as fast as the cards in the FlashSystem models. The drives come in 1.92TB and 3.84TB capacities. You might see these rounded up to 2TB and 4TB on some presentations, but IBM officially never likes to exaggerate.