IBM Cloud announcements at Pulse 2014
Well it's Tuesday again, and you know what that means? IBM announcements! Many of the announcements were made by IBM Executives at the [IBM Pulse 2014 conference].
I am not at Pulse 2014 this year, but I managed to watch many of these announcements on the [IBM Pulse livestream].
Continuing my series on building a Desktop computer for a kindergarten class, I look at Fedora with Sugar mentioned in the article [Top 6 Linux Distributions for Children (Ages 2 and Up)].
(This series started with my post [Kindergarten desktop - The Challenge]. I have a 512MB RAM system with 40GB disk drive that I will install Linux and educational software for a class full of kindergarten children. My previous post covered three other Linux distributions [LinuxKidX, Qimo, and Foresight for Kids].)
I am not stranger to the Sugar learning platform, developed as part of the One Laptop per Child [OLPC] project.
As I mentioned in my post [Helping Young Students - part 1], I was part of the OLPC development team back in 2008, helped local volunteers deploy laptops to children in Nepal and Uruguay, mentored a college student in India, and learned a lot of Python programming language in the process.
Sugar is now developed by Sugar Labs, a nonprofit spin-off of OLPC. The code is free and open source desktop environment for many other machines, including as a "Desktop Environment" for Fedora Linux.
I kept my 40GB hard drive partitioned as follows. On the extended partition, sda5 will hold my system utilities, like Clonezilla and SystemRescue, and sda6 is my swap space, increased to 1500MB. Partition sda1 has Edubuntu 12.04 on it, and I will use sda2 to install Fedora with Sugar.
[Sugar-on-a-stick], is so named because it is designed so that each child has their own LiveUSB. This can run on PC with Windows or Mac OS without affecting those operating systems, allowing a child to use Sugar in the classroom, then take the stick home and continue on their home PC.
A 2GB or greater USB memory stick can hold both Fedora and Sugar, and use that to boot your desktop. Unfortunately, it requires 1GB of RAM, and I have only 512MB. Can I just run Sugar natively on a Fedora install? Yes, thanks to the [Sugar not "on a stick"] instructions, I can install Fedora first, then just:
$sudo bash #yum groupinstall "Sugar Desktop Environment"
Unfortunately, the latest Fedora release (F20) recommends 1GB of RAM. Fortunately, I found Dean Howell's rant [Fedora Irresponsibly Lowers Memory Requirement To 512MB] about the Fedora F17 release. I gave this a try.
There are three ways to install Fedora:
I chose method 3 and downloaded the appropriate ISO file. While F17 only requires 512MB of RAM to run, the graphic installer requires 768MB, and is fully explained in this [29-step F17 installation guide].
To get around this, select "Troubleshooting" which then lets you select low-graphics/text mode installation that ran well under 512MB. I installed both LXDE and Sugar, and everything worked fine!
Why both LXDE and Sugar? Well, Sugar is quite a different environment, and I wanted LXDE as an alternative for the admin and teacher to use.
The article on [Sugar software on Wikipedia] sums it up well:
"Unlike most other desktop environments, Sugar does not use the 'desktop', 'folder' and 'window' metaphors. Instead, Sugar's default full-screen activities require users to focus on only one program at a time. Sugar implements a novel file-handling metaphor (the Journal), which automatically saves the user's running program session and allows him or her to later use an interface to pull up their past works by date, activity used or file type."
Now that I have that working, it is time to upgrade from non-supported F17 to a supported level. Ravi Saive explains the [Four Ways to Upgrade from Fedora 17 to Fedora 18]:
As you can probably guess from the title of this post, I chose method 2 "FedUp" as it seemed to be the least invasive. I was unsure if method-1 "Clean Install" of F18 would work with 512MB of RAM, and I have been through enough horrors of failed yum upgrades on my own Red Hat Enterprise Linux [RHEL] at work to avoid method 3. Method 4 is just a script to automate the steps of method 3.
The steps are fairly straightforward. First, install the FedUp package, run "yum update" to ensure you have all the latest kernel and F17 packages for everything else, and reboot.
Then run the fedup-cli command, which upgrades all the packages to F18 level and creates a special kernel level that will then finish the install after the second reboot. It took a while, so I let it run unattended. I put the debug log on partition sda5 in case anything went wrong.
#fedup-cli --reboot --network 18 --de
What could go wrong? Well, it turns out that fedup works by updating the Grub2 boot loader configuration, but my grub2 resides on sda1 partition instead, owned by my existing Edubuntu. The reboot did not give me the option to run the specialized kernel to finish the process.
Fixing this was a hot mess, but I managed to configure Grub2 on Fedora, and complete the upgrade and get everything working as before. However, even though it just came out last year, [F18 version is already out of support]! This means I get a second chance to do FedUp, this time to F19 release. Oh boy! Fun!
While the second time went smoother, the problem was that F19 doesn't seem to run well in 512MB of RAM, and chances are F20 won't either.
So what have I learned from this?
If you have any experience with Fedora or Sugar in the classroom, comment below!
Next week, thousands will convene in Las Vegas for [IBM Pulse 2014], an IBM conference that will focus on Cloud, Service and Storage Management.
To lead up to this event, my colleague Steve Wojtowecz, or 'Woj' as we like to call him, IBM VP of Storage and Network Management Software Development, has a five part series that is worth a read. Here are some excerpts:
For more insights into these predictions, attend [IBM Pulse 2014] in Las Vegas, next week, February 23-26.
Sadly, I won't be there in person. Although I helped launch the original IBM Pulse back in 2008, I have only been invited once to come back, and that was as a last minute replacement for another speaker in 2012. Unfortunately, I could not accept because of my [near-death experience].
Last month, my post [ IBM System Storage Announcements for January 2014] introduced the IBM FlashSystem 840. Last week, I had blog post [Fall in Love with IBM FlashSystem V840 Enterprise Performance Solution]. The similarity in names has raised some confusion.
The first, "Without V" is a 2U storage array that uses Flash to offer 90-135 microsecond latency. Here are some IBM Redbooks that provide guidance:
The second solution, "With V" (for Valentine's Day, of course) is a storage virtualization solution that not only contains the technology from the FlashSystem 840 above, but also borrows technology from our SAN Volume Controller to provide added functionality, like Real-time Compression, Remote Mirroring and Thin provisioning.
We don't have an IBM Redbook specifically yet for the V840, so for now, consider using the [Implementing FlashSystem 840 with SAN Volume Controller] solution guide to get you started.
(Update: Now available! [IBM FlashSystem V840 Enterprise Performance Solution - IBM Redbooks Product Guide])
To learn more about new IBM Redbooks as they get published, follow Burt Dufrasne and team on the [IBM System Storage Redbooks blog]!
Comments (2) Visits (11824)
Well, it's Tuesday again, and you know what that means? IBM Announcements!
This week we also have [Valentine's day], so it is perfect time for you to fall in love with the new [IBM FlashSystem V840 Enterprise Performance Solution]! The "V" stands for Valentine.
From the photo, the marketing people staggered the various components to give it a stylized [Dagwood Sandwich] effect. I can assure you that these are just standard 19-inch rack components that fit into 6U of space in standard IT racks.
Starting top to bottom, we have the first FlashSystem V840 Control Enclosure, its 1U-high UPS, a second FlashSystem V840 Control Enclosure and its UPS, and finally a 2U-high FlashSystem V840 Storage Enclosure.
You can have up to a dozen Flash modules, either 2TB or 4TB size, for a maximum of 40TB usable RAID-protected capacity. These can be protected with AES 256-bit encryption. The FlashSystem modules are front-loaded, and slide in and out for easy maintenance.
The system is fully redundant and hot-swappable with concurrent code load to ensure high availability.
(Update: In the comments, readers thought that this was nothing more than just a two-node SVC with FlashSystem 840. There are differences, so I have added the following table.)
The system is fully VMware-certified, supporting VAAI interfaces, and an SRA for VMware's Site Recovery Manager (SRM). With Real-time Compression, you can get up to 80 percent capacity savings for workloads like Virtual Desktop Infrastructure (VDI). That in effect gives you up to 5x (200TB) of virtual capacity in 6U of rack space!
You can either keep it as an All-Flash array, or you can virtualize external IBM and non-IBM disk systems, and use the Flash capacity in the Storage Enclosure for IBM's Easy Tier automated sub-volume tiering and data migration. With or without external storage, the FlashSystem V840 can provide local and remote mirroring and point-in-time copies.