Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Well, it's Tuesday again, and you know what that means! IBM Announcements! Typically, IBM System Storage has three to five major product launches per year. Making announcements every Tuesday would have been two frequent, and having one big announcement every two or three years would be too far apart. Worldwide combined revenues for storage hardware and software grew double digits last year, comparing full-year 2011 to the prior 2010 year, and I am sure that 2012 will also be a good year for IBM as well! This week we have announcements for both disk and tape, but since 2012 is the 60th Diamond Anniversary for tape, I will start with tape systems first.
TS1140 support for JA/JJ tape cartridges
The TS1140 enterprise tape drive was announced at the [Storage Innovation Executive Summit] last May. It supported a new E07 format on three different new tape cartridges. Models "JC" was 4.0TB standard re-writeable tapes, "JY" was 4.0TB WORM tapes, and "JK" were 500GB economy tapes that were less expensive, but offered faster random access.
Generally, IBM has adopted an N-2 read, N-1 write [backward compatibility]. This means that the TS1140 could read E05 and E06 formatted tapes on JB and JX media, and could write E06 format on JB and JX media. However, there are a lot of older JA and JJ media, especially as part of TS7740 environments, so IBM now supports TS1140 drives to read J1A formatted JA and JJ media. This is not just for TS7740 environments, any TS1140 in stand-alone or tape library configurations will support this as well.
TS7700 R2.1 enhancements
IBM is a leader in tape virtualization with or without physical tape as back-end media. There are two hardware models of the [IBM Virtualization Engine TS7700 family] for the IBM System z mainframe. These virtual libraries are referred to as "clusters" in IBM literature.
The TS7740 Virtual Tape Library supports putting virtual tape images on disk first, then move less-active data to physical tape, which I covered in my blog post [IBM Announcements - July 2007].
A unique feature of the TS7700 series is support for a Grid configuration, which allows up to six different TS7700 clusters to be grouped into a single instance image. These clusters can be in local or remote locations, connected via WAN or LAN connections.
R2.1 is the latest software release of this successful IBM's TS7700 series.
True Sync Mode Copy. Before R2.1, the TS7700 offered "immediate mode copy". An application would write to a virtual tape, and when it was done with the tape and performed an unmount, the TS7700 would then replicate the tape contents to a secondary cluster on the grid. With True Sync Mode, data contents are replicated per implicit or explicit SYNC points. This is another IBM first in the IT tape industry.
Remote Mount Fail-over. When you have two or more TS7700 clusters in a grid configuration, you can do remote mounts. We've added fail-over multi-pathing up to four paths, so that if a link to a remote cluster is down, it will try one of the others instead.
Parallel Copies and Pre-Migration. On of my 19 patents is for the pre-migration feature for the IBM 3494 Virtual Tape Server (VTS) that carries forward into the TS7700, and is also used in the SONAS and Information Archive products. However, when the grid architecture was introduced, the engineers decided not to allow pre-migration and copies to secondary clusters to occur concurrently. Now these two operations can be done in parallel.
Merge two grids into one grid. Now that we can support up to six clusters into a single grid, we have people with 2-cluster and 3-cluster grids looking to merge them into one. Of course, all the logical and physical volume serials (VOLSER) must be unique!
Accelerate off JA/JJ Media. There are a lot of older JA and JJ media still in TS7700 libraries. This feature allows customers to speed up the transition to newer physical tape media.
Copy Export to E06 format on JB media. This one is clever, and I have to say I would have never thought about it. Let's say you have a TS7740 with TS1140 drives, but you want to export some virtual tapes to physical media to be sent to someone who only has a TS7740 connected with older TS1130 drives. These older drives can't read new JC media nor make sense of the E07 format. This feature will let you export to older JB media in E06 format so that it will be fully readable at the new location on the TS1130 drives.
Copy Export Merge service offering. Thanks to mergers and acquisitions, it is sometimes necessary to split off a portion of data from a TS7700 grid. In the past, IBM supported sending this export to a completely empty TS7700 library, but this new service offerings allows the export to be merged into an existing TS7700 that already contains data.
LTFS-SDE support for Mac OS X 10.7 Lion
How do people still not yet know about the Linear Tape File System [LTFS]? I mentioned this in my blogs back in 2010 in [April], [September], and [November]. Last year, LTFS was the [NAB Show Pick Hits Award] and an [Emmy] for revolutionizing the use of digital tape in Television broadcasting.
In layman's terms, the Single Drive Edition [LTFS-SDE] allows a tape cartridge to be treated like USB memory stick. It is supported on the LTO5 tape drives for systems running various levels of Windows, Linux and Mac OS X. Prior to this announcement, IBM supported Snow Leopard (10.5.6) and Leopard (10.6), and now supports Mac OS X 10.7 "Lion" release.
IBM first introduced Solid-State Drives (SSD) back in 2007 where it made sense the most, in [drive-for-drive replacements on blade servers in the IBM BladeCenter]. Blade servers typically only have a single drive, and SSD are both faster and use less energy on a drive-for-drive comparison, so this provided immediate benefit. Today, SSD are available on a variety of System x and POWER system servers.
In 2008, IBM rocked the world by being the first to reach [1 Million IOPS with Project Quicksilver]. This was an all-SSD configuration which many considered unrealistic (at the time), but it showed the potential for solid state drives.
When the [XIV Gen3 was Announced - July 2011], each module included an 1.8-inch "SSD-Ready" slot in the back. IBM made a Statement of Direction that IBM would someday offer SSD drives to put in these slots. Today's announcement is that IBM has finalized the qualification process, so now XIV Gen3 clients can have 400GB of usable non-volatile SSD read cache added to each module. This SSD can be added to existing XIV Gen3 boxes in the field, or it can be factory-installed in new shipments. If you have a 15-module XIV, that's 6TB of additional read cache! This SSD is entirely managed by the XIV Gen3, so you won't have to spend weeks reading manuals or specifying configuration parameters.
When you carve volumes on the XIV, you now have an option to enable or disable use of the SSD cache for each volume. Since XIV is being used in private and public cloud deployments, this offers the ability to offer premium performance at premium prices. The use of SSD is complementary to IBM XIV Quality of Service (QoS) performance levels, which are determined by host instead.
Well, that's the first major IBM System Storage launch of 2012. Let me know what you think in the comment section below.
Last week, on January 31, two of my colleagues retired from IBM. At IBM, retirements always happen on the last day of the month. Here is my memories of each, listed alphabetically by last name.
Mark Doumas retires after working 32 years with IBM. Mark was my manager for a few months in 2003. Back then, IBM was working on launching a variety of new products, including the IBM SAN File System (SFS), the IBM SAN Volume Controller (SVC), a new release of Tivoli Storage Manager (TSM), and TotalStorage Productivity Center (TPC), which was later renamed to IBM Tivoli Storage Productivity Center.
Mark was manager of the portfolio management team, and I was asked to manage the tape systems portfolio. I am no stranger to tape, as one of my 19 patents is for the pre-migration feature of the IBM 3494 Virtual Tape Server (VTS). The portfolio included LTO and Enterprise tape drives, tape libraries and virtual tape systems. My job was to help decide how much of IBM's money we should invest in each product area. This was less of a technical role, and more of a business-oriented project management position
Portfolio management is actually part of a chain of project management roles. At the lowest level are team leads that manage individual features, referred to as line items of a release. Release managers are responsible for all the line items of a particular release. Product managers determine which line items will be shipped in which release, and often have to balance across three or more releases. Architects help determine which products in a portfolio should have certain features. Since I was chief architect for DFSMS and Productivity Center, stepping up to portfolio manager was naturally the next rung on the career ladder.
(Side note: If you were wondering why I was only a few months on the job, it was because I was offered an even better position as Technical Evangelist for SVC. See my 2007 blog post [The Art of Evangelism] for a humourous glimpse of the kind of trouble I got in with that title on my business card!)
While my stint in this role was brief, I am still considered an honorary member of the tape development team. Nearly every week I present an overview of our tape systems portfolio at the Tucson Executive Briefing Center, or on the road at conferences and marketing events.
This year, 2012, marks the 60th anniversary of IBM Tape, but I will save that for a future post!
Jim is an IBM Fellow for IBM Systems and Technology Group. There are only 73 IBM Fellows currently working for IBM, and this is the highest honor IBM can bestow on an employee. He has been working with IBM since 1968 and now retires after 44 years! Jim was tasked with predicting the future of IT, and help drive strategic direction for IBM. Cost pressures, requirements for growth, accelerating innovation and changing business needs help influence this direction.
Many consider Jim one of the fathers of server virtualization. For those who think VMware invented the concept of running multiple operating systems on a single host machine, guess again! IBM developed the first server hypervisor in 1967, and introduced the industry's first [offical VM product on August 2, 1972] for the mainframe.
When I joined IBM in 1986, my first job was to work on what was then called DFHSM software for the MVS operating system. Each software engineer had unlimited access to his or her own VM instance of a mainframe for development and testing. This was way better than what we had in college, having to share time on systems for only a few minutes or hours per day. Today, DFHSM is now called the DFSMShsm component of DFSMS, an element of the z/OS operating system.
At various conferences like [SHARE] and [WAVV] we celebrated VM's 25th anniversary in 1997, and its 30th anniversary in 2002. Today, it is called z/VM and IBM continues to invest in its future. Last October, IBM announced [z/VM 6.2] release which provides Live Guest Relocation (LGR) to seemlessly move VM guest images from one mainframe to another, similar to PowerVM's Live Partition Mobility or VMware's VMotion.
Lately, it seems employees at other companies jump from job to job, and from employer to employer, on average every 4.1 years. According to [National Longitudinal Surveys] conducted by the [US. Government's Bureau of Labor Statistics], the average baby boomer holds 11 jobs. In contrast, it is quite common to see IBMers work the majority of their career at IBM.
The next time you have a tasty beverage in your hand, raise your glass! To Mark and Jim, you have earned our respect, and you both have certainly earned your retirement!