Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Systems Client Experience Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
From New York, Rolf went to London, Paris, Madrid, Morocco, Cairo, South Africa, Bangkok Thailand, Malaysia, Singapore, New Zealand, Australia, and then back to United States. I was hoping to run into him while I was in Australia and New Zealand last month, but our schedules did not line up.
Travelingwithout baggage is more than just a convenience, it is a metaphor for the philosophy that we should keep only what we need, and leave behind what we don't. This was the approach taken by IBM in the design of the IBM Storwize V7000 midrange disk system.
The IBM Storwize V7000 disk system consists of 2U enclosures. Controller enclosures have dual-controllers and drives. Expansion enclosures have just drives. Enclosures can have either 24 smaller form factor (SFF) 2.5-inch drives, or twelve larger 3.5-inch drives. A controller enclosure can be connected up to nine expansion enclosures.
The drives are all connected via 6 Gbps SAS, and come in a variety of speeds and sizes: 300GB Solid-State Drive (SSD); 300GB/450GB/600GB high-speed 10K RPM; and 2TB low-speed 7200 RPM drives. The 12-bay enclosures can be intermixed with 24-bay enclosures on the same system, and within an enclosure different speeds and sizes can be intermixed. A half-rack system (20U) could hold as much as 480TB of raw disk capacity.
This new system, freshly designed entirely within IBM, competes directly against systems that carry a lot of baggage, including the HDS AMS, HP EVA, an EMC CLARiiON CX4 systems. Instead, we decided to keep the what we wanted from our other successful IBM products.
Inspired by our successful XIV storage system, IBM has developed a web-based GUI that focuses on ease-of-use. This GUI uses the latest HTML5 and dojo widgets to provide an incredible user experience.
Borrowed from our IBM DS8000 high-end disk systems, state-of-the-art device adapters provide 6 Gbps SAS connectivity with a variety of RAID levels: 0, 1, 5, 6, and 10.
From our SAN Volume Controller, the embedded [ SVC 6.1 firmware] provides all of the features and functions normally associated with enterprise-class systems, including Easy Tier sub-LUN automated tiering between Solid-State Drives and Spinning disk, thin provisioning, external disk virtualization, point-in-time FlashCopy, disk mirroring, built-in migration capability, and long-distance synchronous and asynchronous replication.
Finally, the various "internal NDA" that kept me from publishing this sooner have expired, so now I have the long-awaited [Inside System Storage: Volume II], documenting IBM's transformation in its storage strategy, including behind-the-scenes commentary about IBM's acquisitions of XIV and Diligent. Available initially in paperback form. I am still working on the hard cover and eBook editions.
For those who have not yet read my first book, Inside System Storage: Volume I, it is still available from my publisher Lulu, in [hard cover], [paperback] and [eBook] editions.
IBM System Storage DS8800
A lesson IBM learned long ago was not to make radical changes to high-end disk systems, as clients who run mission-critical applications are more concerned about reliability, availability and serviceability than they are performance or functionality. Shipping any product before it was ready meant painfully having to fix the problems in the field instead.
(EMC apparently is learning this same lesson now with their VMAX disk system. Their Engenuity code from Symmetrix DMX4 was ported over to new CLARiiON-based hardware. With several hundred boxes in the field, they have already racked up over 150 severity 1 problems, roughly half of these resulted in data loss or unavailability issues. For the sake of our mutual clients that have both IBM servers and EMC disk, I hope they get their act together soon.)
To avoid this, IBM made incremental changes to the successful design and architecture of its predecessors. The new DS8800 shares 85 percent of the stable microcode from the DS8700 system. Functions like Metro Mirror, Global Mirror, and Metro/Global Mirror, are compatible with all of the previous models of the DS8000 series, as well as previous models of the IBM Enterprise Storage Server (ESS) line.
The previous models of DS8000 series were designed to take in cold air from both front and back, and route the hot air out the top, known as chimney design. However, many companies are re-arranging their data centers into separate cold aisles and hot aisles. The new DS8800 has front-to-back cooling to help accommodate this design.
My colleague Curtis Neal would call the rest of this a "BFD" announcement, which of course stands for "Bigger, Faster and Denser". The new DS8800 scales-up to more drives than its DS8700 predecessor, and can scale-out from a single-frame 2-way system to a multi-frame 4-way system. IBM has upgraded to faster 5GHz POWER6+ processors, with dual-core 8 Gbps FC and FICON host adapters, 8 Gbps device adapters, and 6 Gbps SAS connectivity to smaller form factor (SFF) 2.5-inch SAS drives. IBM Easy Tier will provide sub-LUN automated tiering between Solid-State Drives and spinning disk. The denser packaging with SFF drives means that we can pack over 1000 drives in only three frames, compared to five frames required for the DS8700.
The [IBM System Storage SAN Volume Controller] software release v6.1 brings Easy Tier sub-LUN automated tiering to the rest of the world. IBM Easy Tier moves the hottest, most active extents up to Solid-State Drives (SSD) and moves the coldest, least active down to spinning disk. This works whether the SSD is inside the SVC 2145-CF8 nodes, or in the managed disk pool.
Tired of waiting for EMC to finally deliver FAST v2 for your VMAX? It has been 18 months since they first announced that someday they would have sub-LUN automatic tiering. What is taking them so long? Why not virtualize your VMAX with SVC, and you can have it sooner!
SVC 6.1 also upgrades to a sexy new web-based GUI, which like the one for the IBM Storwize V7000, is based on the latest HTML5 and dojo widget standards. Inspired by the popular GUI from the IBM XIV Storage System, this GUI has greatly improved ease-of-use.
A client asked me to explain "Nearline storage" to them. This was easy, I thought, as I started my IBM career on DFHSM, now known as DFSMShsm for z/OS, which was created in 1977 to support the IBM 3850 Mass Storage System (MSS), a virtual storage system that blended disk drives and tape cartridges with robotic automation. Here is a quick recap:
Online storage is immediately available for I/O. This includes DRAM memory, solid-state drives (SSD), and always-on spinning disk, regardless of rotational speed.
Nearline storage is not immediately available, but can be made online quickly without human intervention. This includes optical jukeboxes, automated tape libraries, as well as spin-down massive array of idle disk (MAID) technologies.
Offline storage is not immediately available, and requires some human intervention to bring online. This can include USB memory sticks, CD/DVD optical media, shelf-resident tape cartridges, or other removable media.
Sadly, it appears a few storage manufacturers and vendors have been misusing the term "Nearline" to refer to "slower online" spinning disk drives. I find this [June 2005 technology paper from Seagate], and this [2002 NetApp Press Release], the latter of which included this contradiction for their "NearStore" disk array. Here is the excerpt:
"Providing online access to reference information—NetApp nearline storage solutions quickly retrieve and replicate reference and archive information maintained on cost-effective storage—medical images, financial models, energy exploration charts and graphs, and other data-intensive records can be stored economically and accessed in multiple locations more quickly than ever"
Which is it, "online access" or "nearline storage"?
If a client asked why slower drives consume less energy or generate less heat, I could explain that, but if they ask why slower drives must have SATA connections, that is a different discussion. The speed of a drive and its connection technology are for the most part independent. A 10K RPM drive can be made with FC, SAS or SATA connection.
I am opposed to using "Nearlne" just to distinguish between four-digit speeds (such as 5400 or 7200 RPM) versus "online" for five-digit speeds (10,000 and 15,000 RPM). The difference in performance between 10K RPM and 7200 RPM spinning disks is miniscule compared to the differences between solid-state drives and any spinning disk, or the difference between spinning disk and tape.
I am also opposed to using the term "Nearline" for online storage systems just because they are targeted for the typical use cases like backup, archive or other reference information that were previously directed to nearline devices like automated tape libraries.
Can we all just agree to refer to drives as "fast" or "slow", or give them RPM rotational speed designations, rather than try to incorrectly imply that FC and SAS drives are always fast, and SATA drives are always slow? Certainly we don't need new terms like "NL-SAS" just to represent a slower SAS connected drive.
It's Tuesday, and you know what that means... IBM Announcements!
IBM System Storage ProtecTIER
Today, IBM refreshed its IBM System Storage ProtecTIER data deduplication family with new hardware and software. On the hardware side, The [TS7650G gateway] now has 32 cores and 64GB RAM. The [TS7650 Appliance] now has 24 cores and 64GB of RAM, and the [TS7610 Appliance Express] has 4 cores and up to 16GB of RAM.
On the software side, all of these now support Symantec's proprietary "OpenStorage" OST API. This applies across the board, from the [Enterprise Edition], [Appliance Edition], and the [Entry Edition]. For those using Symantec NetBackup as their backup software, the OST API can provide advantages over the standard VTL interface.
IBM Systems Director Storage Control
The second announcement has an interesting twist. I could file this in my "I Told You So" folder. Offiically, it's called the [Cassandra Complex], where you accurately predict how something will turn out, but being unable to convince anyone else of what the future holds.
About ten years ago, I was asked to be lead architect of a new product to be called IBM TotalStorage Productivity Center, which was later renamed to IBM Tivoli Storage Productivity Center. This would combine three projects:
Tivoli Storage Resource Manager (TSRM)
Tivoli SAN Manager (TSANM)
Multiple Device Manager (MDM)
The first two were based on Tivoli's internal GUI platform, and the MDM was a plug-in for IBM Systems Director. I argued that administrators would want everything on a single pane of glass, and that we should bring all the components under a common GUI platform, such as IBM Systems Director. Unfortunately, management did not agree with me on that, and preferred instead to leave each interface alone to minimize development effort. The only "unification" was to give them all similar sounding names, four components packaged as single product:
Productivity Center for Data (formerly TSRM)
Productivity Center for Fabric (formerly TSANM)
Productivity Center for Disk (formerly MDM)
Productivity Center for Replication (formerly MDM)
While this management decision certainly allowed version 1 to hit the market sooner, this was not a good "first impression" of the product for many of our clients.
In 2002, IBM acquired Trellisoft, Inc. which replaced the internally-developed TSRM with a much better interface, but again, this was different GUI than the other components. A "launcher" was created that would launch the various disparate interfaces for each component for Version 2. At this point, we have different development teams scattered in five locations, with the first two components being developed by the Tivoli software team, and the other two components being developed by the System Storage hardware team.
Often times, when a technical lead architect and management do not agree, things do not end well. The lead architect has to leave the product, and management is forced to take alternative actions to keep the product going. In my case, management considered the idea of a common GUI as an expensive "nice-to-have" luxury we could not afford, but I considered this a "must-have". I moved on to a new job within IBM, and management, unable to continue without my leadership, gave up and handed the entire project over to the Tivoli Software team.
The Tivoli Software team took a whiff at the pile of code and agreed that it stunk. Dusting off my original design documents, they pretty much discarded most of the code and re-wrote much from scratch, with a common database, common app server, and common GUI platform. Unfortunately, Productivity Center for Replication was held up waiting for some hardware prerequisites, but the other three components would be packaged together as "Productivity Center v3 - Standard Edition" and was a big improvement over the prior versions.
In Version 4, TotalStorage Productivity Center was renamed to Tivoli Storage Productivity Center, and the Replication component was brought into the mix. A scaled-down version packaged as Productivity Center "Basic Edition" was made available as a hardware appliance named "System Storage Productivity Center" or SSPC. The idea was to provide a pre-installed 1U-high hardware console that had the basic functions of Productivity Center, with the option to upgrade to the full Tivoli Storage Productivity Center with just license keys.
So, now, years later, management recognizes that a common GUI platform is more than just a "nice-to-have". IBM now support three very specific use cases:
1. Administration for a single product
For small clients who might have only a single IBM product, IBM is now focused on making the GUI browser-based, specifically to work with the Mozilla Firefox browser, but any similar browser should work as well. The new IBM Storwize V7000 GUI is a good example of this.In this case, the browser serves as the common GUI platform.
2. Administration for both servers and storage devices
For mid-sized companies that have administrators managing both servers and storage, IBM announced this month the new [IBM Systems Director Storage Control v4.2.1] plug-in, which provides Tivoli Storage Productivity Center "Basic Edition" support. This allows admins already familiar with IBM Systems Director for managing their servers to also manage basic storage functions. This is the "I Told You So" moment, connecting server and storage administration under the IBM Systems Director management platform makes a lot of sense, it did when I came up with the idea 10 years ago! Hmmmm?
3. Administration for just the storage environment
For larger companies big enough to have separate server and storage admin teams, IBM continues to offer the full Tivoli Storage Productivity Center product for the storage admins. The most recent release enhanced the support for IBM DS8000, SVC, Storwize V7000 and XIV storage systems.
Today, analysts consider IBM's [Tivoli Storage Productivity Center] one of the leading products in its category. I am glad my original vision has finally come to life, even though it took a while longer than I expected.
To learn more about IBM storage hardware, software or services, see the updated [IBM System Storage] landing page.
To make true advances in any industry or field requires forward thinking—as well as industry insight and experience. It can't be done just by packaging a bag of piece parts and putting a new label on it. But forward thinkers are putting smarter, more powerful technology to uses that were once unimaginable -- either in scale or in progress.
The graphics developed for the IBM Smarter Planet vision are interesting. This one for Infrastructure includes images relating to public utilities, like gas, water and electricity, clouds representing cloud computing, green forests representing the need for energy efficiency and reducing carbon footprint to fight global warming, roads, representing the intricate transportation and traffic systems, highways and city streets that connect us all together, and a printed circuit board, representing the Information Technology that makes all of this possible.
Ironically, I didn't even know I made the final cut until I got three, yes three, separate requests for interviews about it. I already reached the "million hits" milestone. Other people track these things for me, so it will be interesting how much additional traffic my latest [15 minutes of fame] will generate.
Infrastructure is just one of the 25 different areas that IBM's vision for a Smarter Planet is trying to address, including the need for smarter buildings, smarter cities, smarter transportation systems, smarter energy grids, smarter healthcare and public safety, and smarter governments.
In his blog post, [The Lure of Kit-Cars], fellow blogger Chuck Hollis (EMC) uses an excellent analogy delineating the differences between kit-cars you build from parts, versus fully-integrated systems that you can drive off the car dealership showroom lot. The analogy holds relatively well, as IT departments can also build their infrastructure from parts, or you can get fully-integrated systems from a variety of vendors.
Is this what your data center looks like?
Certainly, this debate is not new. In my now infamous 2007 post [Supermarkets and Specialty Shops], I explained that there were clients that preferred to get their infrastructure from a single IT supermarket, like IBM or HP, while others were lured into thinking that buying separate parts from butchers, bakers and candlestick makers and other specialty shops was somehow a better idea.
Chuck correctly explains that in the early years of the automobile industry, before major car manufacturers had mass-production assembly lines, putting a car together from parts was the only way cars were made. Today, only the few most avid enthusiasts build cars this way. The majority get cars from a single seller and drive away. In my post [Resolving the Identity Crisis], I postulated that EMC appeared to be trying to shed itself of the "disk-only specialty shop" image and over to be more like IBM. Not quite a full IT Supermarket, but perhaps more like a [Trader Joe's] premium-priced retailer.
(If you find that EMC's focus on integrated systems appears to be a 180-degree about-face from their historical focus on selling individual best-of-breed products, see my previous discussion of Chuck's contradictions in my blog post: [Is Storage the Next Confusopoly].)
While companies like EMC might be making this transition, there is a lot of resistance and inertia from the customer marketplace. I agree with Chuck, companies should not be building kit-cars or IT infrastructures from parts, certainly not from parts sold from different vendors. In my post [Talking about Solutions not Products], I explained how difficult it was to change behavior. CIOs, IT directors and managers need to think differently about their infrastructure. Let's take a quick look at some choices:
Following Chuck's argument, it makes no sense to build a "kit-car" combining Oracle/Sun servers with EMC storage. Oracle would argue it makes more sense to run on integrated systems, business logic on their "Exalogic" system, and database processing on their "Exadata". Benchmark after benchmark, however, IBM is able to demonstrate that Oracle applications and databases run faster on IBM systems. Customers that want to run Oracle applications can run either on a full Oracle stack, or a full IBM stack, and both do better than a kit-car including EMC parts.
HP has been working hard to keep up with IBM in this area. With their their partnership with Microsoft, and acquisitions of EDS, 3Com and 3PAR, they can certainly make a case for getting a full HP stack rather than a kit-car mixing HP servers with EMC disk storage. The problem is that HP is focused on a converged infrastructure for private cloud computing, but Microsoft is focused on Azure and public cloud computing. It will be interesting when these two big companies sort this out. Definitely watch this space.
If you squint your eyes and focus on the part of the world that only has x86 machines, then Dell can be seen as an IT supermarket. In my post about [Entry-Level iSCSI Offerings], I discuss how Dell's acquisition of EqualLogic was a signal that it was trying to get away from selling EMC specialty shop products, and building up its own set of offerings internally.
Cisco is new on the server scene, but has already made quite a splash. Here, I have to agree with Chuck's logic: the only time it makes sense to buy EMC disk storage at all is when it is part of an integrated "V-block". This is not really an IT supermarket situation, instead you park your car at the "Acadia Mini-Mall" and get what you need from Trader Joe's, Cisco UCS, and VMware stores.
But wait, if what you want is running VMware on Cisco servers, you might be better off with IBM System Storage N series or NetApp storage. In his blog post about [Enhanced Secure Multi-Tenancy], fellow Blogger Val Bercovici (NetApp) provides a convincing argument of why Cisco and VMware run better on an "N-block" rather than a "V-block". IBM N series provides A-SIS deduplication, and IBM Real-time Compression can provide additional capacity and performance improvements. That might be true, but whether you get your storage from EMC, NetApp or IBM, to me, you are still working with three different vendors in any case.
Of course, following Chuck's logic, it makes more sense for people with IBM servers, whether they be mainframes, POWER systems or x86 machines, to integrate these with IBM storage, IBM software and IBM services. IBM is the leading reseller of VMware, but also has a lot of business with Microsoft Hyper-V, Citrix Xen, Linux KVM, PowerVM, PR/SM and z/VM. While IBM has market leading servers, disk and tape systems, to compete for those RFP bids that just ask for one component or another, it prefers to sell fully-integrated systems, which IBM has been doing successfully since the 1950s.
Back in 2007, I mentioned how IBM's fully-integrated InfoSphere Balanced Warehouse [Trounced HP and Sun]. For business analytics, IBM offers the fully-integrated [IBM Smart Analytics Systems]. Today, IBM expanded its line of fully-integrated private cloud service delivery platforms with the announcement of the [IBM CloudBurst for on Power Systems], which does for POWER7 what the IBM CloudBurst for System x, Oracle Exalogic, or Acadia's V-block, do for x86.
IBM estimates that private clouds built on Power systems can be up to 70 percent less expensive than stand alone x86 servers.
Before he earned his PhD in Mechanical Engineering, my father was a car mechanic. I spent much of my teenage years covered in grease, helping my father assembling cars, lifting engines, and rebuilding carburetors. Certainly this was good father-son time, and I certainly did learn something in the process. Like the automobile industry, the IT industry has matured, and it makes no financial sense to build your own IT infrastructure from parts from different vendors.
For a test drive of the industry's leading integrated IT systems, see your IBM sales rep or IBM Business Partner.