Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Systems Client Experience Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Well, it's the last day of the year, and I will be celebrating the new year soon.In the mean time, I leave you with an interesting triple combo related to information.
Nick Carr in his post [Cleaning the Slate] offers a list of articles he did not have time for in 2007.Of these, I enjoyed the 7-page keynote address[Information, Knowledge, Authority and Democracy] by Hunter R. Rawlings III.He talks about the importance of recorded knowledge, including discussions by the US founding fathers Thomas Jefferson and James Madison, and how information is an essential part of democracy.Here's a brief excerpt:
Following the burning of the Capitol in 1815,President James Madison restored the Library of Congress by purchasing ThomasJefferson’s library for the nation. It was Jefferson’s unique classification scheme that thefirst full-time Librarian of Congress, appointed by Madison, used in reorganizing theLibrary. The United States, embodied in the Congress, was to have the best library inthe world because knowledge was necessary to its fundamental purpose, the creationand protection of liberty.
James Madison believed, in other words, that he lived in a “knowledge age.” In ourmyopic way, we like to think that we invented the knowledge age sometime late in the20th century. We did not. Madison and his contemporaries had complete faith andconfidence in the necessity of what they called “useful knowledge,” which, of course,privileged many things we no longer consider useful, such as the ability to read Latinand Greek and to understand the lessons of ancient history.
...by employing collaborative filtering, you use other people’s time to weed out the things that would waste yours. In fact, Del.icio.us and Stumble Upon polls your friends and people with similar interests for the most crucial sources of information and anything else you might have accident skipped over. If The Wisdom of Crowds has taught us anything, it is that a large group of people is drastically more efficient than you’ll ever be on your own.
Unless you enjoy grinding yourself to the bone, use this principle—whether you call it “crowdsourcing” or otherwise—to stop drinking from the information fire hose. It’s not more information, it’s better information, that distinguishes the real winners in business and life.
Finally, Galacticast presents [A Copyright Carol],a humorous 5-minute parody video on what might happen in the future as a result of lawslike the Canadian Digital Millennium Copyright Act[DMCA].
Yesterday, I was able to get the "Build 650" up and running under Qemu emulation onmy Thinkpad laptop computer. Today, I was able to get my Thinkpad and my XO laptoptalking to each other for a "chat".
The built-in "Chat" activity is one of the many kid-friendly activities included onthe XO laptop for the One Laptop Per Child [OLPC] project.It is also possible for two or more people to share other activities, like editing a textdocument, or browsing the internet.
As they say, emulation is only 95% complete, and this is true in this case as well. My Thinkpaddoes not have a built-in video camera, and for some reason the Qemu emulation does not let mehear any sound, despite specifying "-soundhw es1370" parameter. And lastly, it doesn't have the"mesh network" built-in Wi-Fi capability, just standard 54Mbps 802.1g through my Linksys router.
So, I set both XO and Thinkpad to use the new "xochat.org" jabber server so that the two couldsee each other:
$ sugar_control_panel -s jabber xochat.org
I set my XO nickname to be "TonyP" and my Thinkpad to be "Pearson", and chose blue-orange forthe first, and orange-blue for the second.
The process of starting a chat is similar to other IM systems like IBM Lotus Sametime. You havea neighborhood view that shows all people online using the same jabber server. In my case therewere about 30 or so icons on the screen. From the colors on my XO, I was able to locate my Thinkpad,and invite him to a chat. You can share the chat with everyone on the network, or keep it privatebetween two people. I tried both ways to see the difference.
In a private two-way chat, the first person starts up their Chat activity, and sends an inviteto join to another person. The second person sees a flashing chat bubble on the bottom of thescreen to the left of all the other action bar icons. The difference is that the chat bubble isblue-orange matching the sender, rather than black-and-white of the rest of the icons.
If the recipient happens to be busy doing something else full-screen, like browsing the web, theredoesn't seem to be any interruption. It is only when he goes to "home view" will he see the coloredchat bubble and decide to join or not.
The chat itself colorizes the text to match to color of the participant's icons. Blue for one, and orangefor the other. It two people had identical color schemes I guess it might be hard to tell. Thetext is white, so it is best to choose darker colors for contrast.
A nice feature is that you can save your chat session with the "keep" button on the upper rightpart of the screen, and your dialogue discussion will show up as an entry in the "journal".
Using this technique, it is possible for someone who has one "XO" laptop and one regular computer,or two regular computers, to develop and test applications that involve the sharing aspect of educational opportunities. Chats can be between students, student-to-teacher, or event student-to-mentor.
Continuing my week's theme on the XO laptop from the One Laptop Per Child [OLPC] foundation, I successfully managedto emulate my XO on another system.
Part of what is attractive of the XO laptop is the hardware, the high-resolution200dpi screen, the clever screen that rotates and folds flat into an eBook reader,and the water-tight, dust-proof keyboard. The other part is the software, howthey managed to pack an entire operating system, with useful applications, intoa 1GB NAND flash drive.
The drawback for developers like me is the risk of changing something that breaks the system. For example, my first attempt to create my own activityresulted in a blank space in my action bar, and my journal went into someinfinite loop, blinking as if it were still loading for minutes on end. I fixed it by deleting out the activity I created and rebooting.
To get around this, I successfully ran the disk-image under Linux's Virtual Machinesoftware called Qemu. This is an open source offering, with a proprietary add-onaccelerator called Kqemu. Here were the steps involved:
Base Operating System
Qemu is now available to run on Linux, Windows and OS X-Intel. I have an Ubuntu 7.04"Feisty Faun" version of Linux installed on my system from a project I did last year, so decided to use that.
Normally, "apt-get install qemu" would be enough, but I wanted to get the latest release, so I downloaded the [0.9.0 version]tarball of compiled binaries. Note that trying to compile Qemu from source requiresa downlevel gcc-3.x compiler, and my attempts to do this failed. The compiled binariesworked fine.
The Kqemu author hasn't packaged this for distribution, so I download the source code anddid my own compiles. You can do the "configure-make-install" using the regular gcc 4.1compiler and it went smoothly.
Getting Kqemu active was bit of a challenge. I had to make sense of Nando Florestan's[Installing Kqumu in Ubuntu] article,and the subsequent comments that followed.
There is a tiny [8MB Linux image]that should be used to verify the Kqemu is activated correctly.
The Disk Image
As with other development efforts, there are the older stable versions, and the bleedingedge development versions. I chose the 650 Build from the [Ship.2 stable versions], whichmatches the version on my XO laptop. The image comes as a *.bz2, which is a highly-compressedfile. Using "Bunzip2", the 221MB file expands to something like 932MB.
I renamed the resulting file to "build650.img"
Once I got all this done, I then made a simple script "launch" in my /home/tpearson/bin directory:
Then "launch build650.img" was all I needed to run the emulation. The full-screen mode helpsemulate the view on XO laptop. I was able to change the jabber server to "xochat.org" and see otherXO laptops online on my neighborhood view.
When running under Qemu, you can't just press Ctrl-Alt-something. For example, Ctrl-Alt-Erase onthe XO reboots the Sugar interface. However, do this on a Linux system, and it reboots your nativeX interface, blowing away everything.Instead, you press Ctrl-Alt-2 to get to the Qemu console, designated by (qemu) prompt,and then type:
Press "Ctrl-Alt-1" followed by "Ctrl-Alt" to get back to the emulated XO screen.
With this emulation, I am more likely to try new things, change files around, edit system files,and so on, without worrying about rendering my actual XO laptop unusable. Once debugged, I canthen work on moving them over to my XO, one at a time.
Wrapping up this week's theme on the XO laptop, I decided to take on thechallenge of printing. I managed to print from my XO laptop to my laserjet printer.I checked the One Laptop Per Child [OLPC] website,and found there is no built-in support for printers, but there have been several peopleasking how to print from the XO, so here are the steps I did to make it happen.
(Note: I did all of these steps successfully on my Qemu-emulated system first, and then performed them on my XO laptop)
Step 1: Determine if you have an acceptable printer
The XO laptop can only connect to a printer via USB cable or over the network.Check your printer to see if it supports either of these two options. In my case, my printer is connected to my Linksys hub that offers Wi-Fi in my home.
The XO runs a modified version of Red Hat's Fedora 7, so we need to also determineif the printer is supported on Linux.Check the [Open Printing Database]for the level of support. This database has come up with the following ranking system.Printers are categorized according to how well they work under Linux and Unix. The ratings do not pertain to whether or not the printer will be auto-recognized or auto-configured, but merely to the highest level of functionality achieved.
Perfectly - everything the printer can do is working also under Linux
Mostly - work almost perfectly - funny enhanced resolution modes may be missing, or the color is a bit off, but nothing that would make the printouts not useful
Partially - mostly don't work; you may be able to print only in black and white on a color printer, or the printouts look horrible
Paperweight - These printers don't work at all. They may work in the future, but don't count on it
If your printer only supports a parallel cable connection, or does not have a high enough ranking above, go buy another printer. The [Linux Foundation] websiteoffers a list of suggested printers and tutorials.
In my case, I have a Brother HL5250-DN black-and-white laserjet printer connected over a network to Windows XP, OS X and my other Linux systems. It is rated as supporting Linux perfectly, so I decided to use this for my XO laptop.
Step 2: Install Common UNIX Printing System (CUPS)
Technically, Linux is not UNIX, but for our purposes, close enough. Start the Terminalactivity, use "su" to change to root, and then use "yum" to install CUPS. Yum will automatically determine what other packages are needed, in this case paps and tmpwatch. Once installed, use "/usr/sbin/cupsd" to get the CUPS daemon started, and add this to the end ofrc.local so that it gets started every time you reboot.
Click graphic on the left to see larger view
[olpc@xo-10-CC-6F ~]$ subash-3.2# yum install cups...Total download size = 3.0 MIs this OK [y/N]? y
To download the appropriate drivers, you may need a browser that can handle file downloads. I have triedto do this with the built-in Browse activity (aka Gecko) but encountered problems. I have both Opera and Firefox installed, but I will focus on Opera for this effort.I also installed the older184.108.40.206 version of the Flash player (worked better than the latest 220.127.116.11 version) and Java JRE.Follow the OLPC Wiki instructions for [Opera, Adobe Flash,and Sun Java] installation, thenverify with the following [Java and Flash] testers.
Step 4: Download drivers and packages unique for your printer
In my case, I used Opera to get to the [Brother Linux Driver Homepage], and downloaded the RPM's for LPR and CUPS wrapper. These are the ones listed under "Drivers for Red Hat, Mandrake (Mandriva), SuSE". I saved these under "/home/olpc" directory.
By default, the root user has no password. However, you will need it to be something for later steps,so here is the process to create a root password. I set mine to "tony" which normallywould be considered too simple a password, but ignore those messages and continue.We will remove it in step 8 (below) to put things back to normal.
[olpc@xo-10-CC-6F ~]$ subash-3.2# passwdChanging password for user root.New UNIX password: tonyBAD PASSWORD: it is too shortRetype new UNIX password: tonypasswd: all authentication tokens updated successfullybash-3.2# exit[olpc@xo-10-CC-6F ~]$
Step 6: Launch CUPS administration
Here I followed the instructions in Robert Spotswood's [Printing In Linux with CUPS] tutorial.Launch the Opera browser, and enter "http://localhost:631/admin" as the URL. The localhostrefers to the laptop itself, and 631 is the special port that CUPS listens to from browsers. You can alsouse 127.0.0.1 as a shortcut for "localhost", and can be used interchangeably.
In my case, it detected both of my networked printers, so I selected the HL5250DN, entered thelocation of my PPD file "/usr/share/cups/model/HL5250DN.ppd" that was created in Step 4. I set the URI to "lpd://192.168.0.75/binary_p1" per the instructions [Network Setting in CUPS based Linux system] in the Brother FAQ page. I chage the page size from "A4" to "Letter".I set this printer as the default printer. When it asks for userid and password, that is whereyou would enter "root" for the user, and "tony" or whatever you decided to set your root password to.
Select "Print a Test Page" to verify that everything is working.
Step 7: Printing actual files
Sadly, I don't know Opera well enough to know how to print from there. So, I went over to my trustedFirefox browser. Select File->Page Setup to specify the settings, File->Print Preview tosee what it will look like, and then File->Print to send it to the printer.
To print the file "out.txt" that is in your /home/olpc directory, for example, enter"file:///home/olpc/out.txt" as the URL of the firefox browser. This will show the file,which you can then print to your printer. I had to specify 200% scaling otherwise the fontswere too small to read.
Step 8: Remove the "root" password
If you want to remove the root password, here are the steps.
[olpc@xo-10-CC-6F ~]$ suPassword: tonybash-3.2# passwd -d rootRemoving password for user root.passwd: Successbash-3.2# exit[olpc@xo-10-CC-6F ~]$
Now the problem is that there is no way to print stuff from any of the Sugar activities. The best place toput in print support would be the Journal activity. Along the bottom where the mounted USB keys arelocated could be an icon for a printer, and dragging a file down to the printer ojbect could cause it tobe send to the printer.
The alternative is to write some scripts invocable from the Terminal activity to determine what isin the journal, and send them to LPR with the appropriate parameters.
I did not have time to do either of these, but perhaps someone out there can take on that as a project.
Continuing my week's theme on the XO laptop from the One Laptop Per Child [OLPC] project, I have been amused watching the OLPC forum discussion on the choiceof browser options available.
The built-in browser is simple but functional. It is full screen,with back, forward, and bookmark buttons, and an entry field forthe URL. This browser is fully integrated with the Sugar platform,files downloaded will appear in the journal. Download an Activity*.xo file, for example, and you can install it from the Journal.If you want to upload a file, click BROWSE on the website, and theJournal will pop up to choose files from.
Out of the box, the XO supports a minimal Flash that can handlesome Flash-based games but not YouTube videos, and does not supportJava.
The good folks of Opera have built a special edition for the XO laptop.However, some settings need to be changed to make the fonts large enoughto read.
Opera can be run as a Sugar activity, but this just launches a mothertask, which in turn launches a daughter task that actually runs thebrowser. This means that Home View will have two icons. The mothertask has an the Opera icon, but click on it and you get a grey screen.The daughter task appears as a grey circle, click on it and you get thebrowser screen. Alt-Tab will rotate through the Activities, so thegrey screen of the mother task is part of the rotation.
Although Opera has one foot on the Sugar platform, and one foot off,the lack of integration means poor interaction with the journal. The use of Opera is correctly registered. However, downloadingfiles requires a working knowledge of subdirectories, and uploading anythingrequires knowing what it is called, and where it is located. Not obviousfor many of the items created by Sugar applications.
The XO laptop is based on Redhat Fedora distribution, so I downloadedthe Firefox RPM package and installed this. To run, you need to startthe Terminal Activity, and then at the cursor type firefox.Journal only registers that the Terminal activity was used, but not anythingelse.
Since I run Firefox 2.0 on Windows XP, OS X and Linux, I am very familiarwith this browser, and it works as expected. Like Opera, there are shortcut keys, tabs for multiple pages, and optionsto add Java and Flash player. I was able to install add-onsfor Del.icio.us and FireFTP, and they worked as expected. Having accessto FTP sites will make development on the XO much easier.Again all files are uploaded/downloaded to directories, so some workingknowledge of where files are placed is required.
The fonts in Firefox did not expand/shrink as nicely as they had in Opera.Be careful not to select "View->
To close, you have to select File->Quit from the browser window, whichbrings you back to the Terminal activity, which you can then shutdown with Ctrl-Esc.
For now, I will keep all three and continue to evaluate them.I saw a few opportunities for improvement:
The Opera and Terminal icons are not on the first screen.You have to hit the right arrow to get to the "overflow" set of icons. Re-ordering the icons is simply a matter of editing the following file with "vi"(my first few lines I use are shown below):
Put the activities in the order you want. Any activity not listed willappear after these.
It might be possible to create a modified Terminal activity thatinvoked Firefox directly, to eliminate having to type it in each time.
Several people have expressed interest in a browser that runs entirely withthe Xo laptop folded over in eBook/Game mode, such that thekeyboard is completely covered up, exposing only the up-left-right-down arrowsand the Circle/Square/X/Check buttons.
Change the "News Reader" to invoke Bloglines instead. This might be yetanother modified Terminal activity, but borrow the icon from News.
Well, if you have further thoughts on these browsers, enter a comment below.