Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is a Master Inventor and Senior IT Specialist for the IBM System Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2011, Tony celebrated his 25th year anniversary with IBM Storage on the same day as the IBM's Centennial. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Wrapping up my week's theme of storage optimization, I thought I would help clarify the confusion between data reduction and storage efficiency. I have seen many articles and blog posts that either use these two terms interchangeably, as if they were synonyms for each other, or as if one is merely a subset of the other.
Data Reduction is LOSSY
By "Lossy", I mean that reducing data is an irreversible process. Details are lost, but insight is gained. In his paper, [Data Reduction Techniques", Rajana Agarwal defines this simply:
"Data reduction techniques are applied where the goal is to aggregate or amalgamate the information contained in large data sets into manageable (smaller) information nuggets."
Data reduction has been around since the 18th century.
Take for example this histogram from [SearchSoftwareQuality.com]. We have reduced ninety individual student scores, and reduced them down to just five numbers, the counts in each range. This can provide for easier comprehension and comparison with other distributions.
The process is lossy. I cannot determine or re-create an individual student's score from these five histogram values.
This next example, complements of [Michael Hardy], represents another form of data reduction known as ["linear regression analysis"]. The idea is to take a large set of data points between two variables, the x axis along the horizontal and the y axis along the vertical, and find the best line that fits. Thus the data is reduced from many points to just two, slope(a) and intercept(b), resulting in an equation of y=ax+b.
The process is lossy. I cannot determine or re-create any original data point from this slope and intercept equation.
In this last example, from [Yahoo Finance], reduces millions of stock trades to a single point per day, typically closing price, to show the overall growth trend over the course of the past year.
The process is lossy. Even if I knew the low, high and closing price of a particular stock on a particular day, I would not be able to determine or re-create the actual price paid for individual trades that occurred.
Storage Efficiency is LOSSLESS
By contrast, there are many IT methods that can be used to store data in ways that are more efficient, without losing any of the fine detail. Here are some examples:
Thin Provisioning: Instead of storing 30GB of data on 100GB of disk capacity, you store it on 30GB of capacity. All of the data is still there, just none of the wasteful empty space.
Space-efficient Copy: Instead of copying every block of data from source to destination, you copy over only those blocks that have changed since the copy began. The blocks not copied are still available on the source volume, so there is no need to duplicate this data.
Archiving and Space Management: Data can be moved out of production databases and stored elsewhere on disk or tape. Enough XML metadata is carried along so that there is no loss in the fine detail of what each row and column represent.
Data Deduplication: The idea is simple. Find large chunks of data that contain the same exact information as an existing chunk already stored, and merely set a pointer to avoid storing the duplicate copy. This can be done in-line as data is written, or as a post-process task when things are otherwise slow and idle.
When data deduplication first came out, some lawyers were concerned that this was a "lossy" approach, that somehow documents were coming back without some of their original contents. How else can you explain storing 25PB of data on only 1PB of disk?
(In some countries, companies must retain data in their original file formats, as there is concern that converting business documents to PDF or HTML would lose some critical "metadata" information such as modificatoin dates, authorship information, underlying formulae, and so on.)
Well, the concern applies only to those data deduplication methods that calculate a hash code or fingerprint, such as EMC Centera or EMC Data Domain. If the hash code of new incoming data matches the hash code of existing data, then the new data is discarded and assumed to be identical. This is rare, and I have only read of a few occurrences of unique data being discarded in the past five years. To ensure full integrity, IBM ProtecTIER data deduplication solution and IBM N series disk systems chose instead to do full byte-for-byte comparisons.
Compression: There are both lossy and lossless compression techniques. The lossless Lempel-Ziv algorithm is the basis for LTO-DC algorithm used in IBM's Linear Tape Open [LTO] tape drives, the Streaming Lossless Data Compression (SLDC) algorithm used in IBM's [Enterprise-class TS1130] tape drives, and the Adaptive Lossless Data Compression (ALDC) used by the IBM Information Archive for its disk pool collections.
Last month, IBM announced that it was [acquiring Storwize. It's Random Access Compression Engine (RACE) is also a lossless compression algorithm based on Lempel-Ziv. As servers write files, Storwize compresses those files and passes them on to the destination NAS device. When files are read back, Storwize retrieves and decompresses the data back to its original form.
As with tape, the savings from compression can vary, typically from 20 to 80 percent. In other words, 10TB of primary data could take up from 2TB to 8TB of physical space. To estimate what savings you might achieve for your mix of data types, try out the free [Storwize Predictive Modeling Tool].
So why am I making a distinction on terminology here?
Data reduction is already a well-known concept among specific industries, like High-Performance Computing (HPC) and Business Analytics. IBM has the largest marketshare in supercomputers that do data reduction for all kinds of use cases, for scientific research, weather prediction, financial projections, and decision support systems. IBM has also recently acquired a lot of companies related to Business Analytics, such as Cognos, SPSS, CoreMetrics and Unica Corp. These use data reduction on large amounts of business and marketing data to help drive new sources of revenues, provide insight for new products and services, create more focused advertising campaigns, and help understand the marketplace better.
There are certainly enough methods of reducing the quantity of storage capacity consumed, like thin provisioning, data deduplication and compression, to warrant an "umbrella term" that refers to all of them generically. I would prefer we do not "overload" the existing phrase "data reduction" but rather come up with a new phrase, such as "storage efficiency" or "capacity optimization" to refer to this category of features.
IBM is certainly quite involved in both data reduction as well as storage efficiency. If any of my readers can suggest a better phrase, please comment below.
"When Watson is booted up, the 15TB of total RAM are loaded up, and thereafter the DeepQA processing is all done from memory. According to IBM Research, the actual size of the data (analyzed and indexed text, knowledge bases, etc.) used for candidate answer generation and evidence evaluation is under 1 Terabyte (TB). For performance reasons, various subsets of the data are replicated in RAM on different functional groups of cluster nodes. The entire system is self-contained, Watson is NOT going to the internet searching for answers."
I had several readers ask me to explain the significance of the "Terabyte". I'll work my way up.
A bit is simply a zero (0) or one (1). This could answer a Yes/No or True/False question.
Most computers have standardized a byte as a collection of 8 bits. There are 256 unique combinations of ones and zeros possible, so a byte could be used to storage a 2-digit integer, or a single upper or lower case character in the English alphabet. In pratical terms, a byte could store your age in years, or your middle initial.
The Kilobyte is a thousand bytes, enough to hold a few paragraphs of text. A typical written page could be held in 4 KB, for example.
The IBM Challenge to play on Jeopardy! is being compared to the historic 1969 moon landing. To land on the moon, Apollo 11 had the "Apollo Guidance Computer" (AGC) which had 74KB of fixed read-only memory, and 2KB of re-writeable memory. Over [3500 IBM employees were involved] to get the astronauts to the moon and safely back to earth again.
The importance of this computer was highlighted in a [lecture by astronaut David Scott] who said: "If you have a basketball and a baseball 14 feet apart, where the baseball represents the moon and the basketball represents the Earth, and you take a piece of paper sideways, the thinness of the paper would be the corridor you have to hit when you come back."
The Megabyte is a thousand KB, or a million bytes. The 3.5-inch floppy diskette, mentioned in my post [A Boxfull of Floppies] could hold 1.44MB, or about 360 pages of text.
In the article [Wikipedia as a printed book], the printing of a select 400 articles resulted in a book 29 inches thick. Those 5,000 pages would consume about 20 MB of space.
One of my favorite resources I use to search is the Internet Movie Data Base [IMDB]. Leaving out the photos and videos, the [text-only portion of the IMDB database is just over 600 MB], representing nearly all of the actors, awards, nominations, television shows and movies. A standard CD-ROM can hold 700MB, so the text portion of the IMDB could easily fit on a single CD.
The Gigabyte is a thousand MB, or a billion bytes. My Thinkpad T410 laptop has 4GB of RAM and 320GB of hard disk space. My laptop comes with a DVD burner, and each DVD can hold up to 4.7GB of information.
The popular Wikipedia now has some 17 million articles, of which 3.5 million are in English language. It would only take [14GB of space to hold the entire English portion] of Wikipedia. That is small enough to fit on twenty CDs, three DVDs, an Apple iPad or my cellphone (a Samsung Galaxy S Vibrant).
Perhaps you are thinking, "Someone should offer Wikipedia pre-installed on a small handheld!" Too late. The [The Humane Reader] is able to offer 5,000 books and Wikipedia in a small device that connects to your television. This would be great for people who do not have access to the internet, or for parents who want their kids to do their homework, but not be online while they are doing it.
In the latest 2009 report of [How Much Information?] from the University of California, San Diego, the average American consumes 34 GB of information. This includes all the information from radio, television, newspapers, magazines, books and the internet that a person might look at or listen to throughout the day. This project is sponsored by IBM and others to help people understand the nature of our information-consuption habits.
Back in 1992, I visited a client in Germany. Their 90 GB of disk storage attached to their mainframe was the size of three refrigerators, and took five full-time storage administrators to manage.
The Terabyte is a thousand GB, or a trillion bytes. It is now possible to buy external USB drive for your laptop or personal computer that holds 1TB or more. However, at 40MB/sec speeds that USB 2.0 is capable of, it would take seven hours to do a bulk transfer in or out of the device.
IBM offers 1TB and 2TB disk drives in many of our disk systems. In 2008, IBM was preparing to announce the first 1TB tape drive. However, Sun Microsystems announced their own 1TB drive the day before our big announcement, so IBM had to rephrase the TS1130 announcement to [The World's Fastest 1TB tape drive!]
A typical academic research library will hold about 2TB of information. For the [US Library of Congress] print collection is considered to be about 10TB, and their web capture team has collected 160TB of digital data. If you are ever in the Washington DC, I strongly recommend a visit to the Library of Congress. It is truly stunning!
Full-length computer animated movies, like [Happy Feet], consume about 100TB of disk storage during production. IBM offers disk systems that can hold this much data. For example, the IBM XIV can hold up to 151 TB of usable disk space in the size of one refrigerator.
A Key Performance Indicator (KPI) for some larger companies is the number of TB that can be managed by a full-time employee, referred to as TB/FTE. Discussions about TB/FTE are available from IT analysts including [Forrester Research] and [The Info Pro].
The website [Ancestry.com] claims to have over 540 million names in its genealogical database, with a storage of 600TB, with the inclusion of [US census data from 1790 to 1930]. The US government took nine years to process the 1880 census, so for the 1890 census, it rented equipment from Herman Hollerith's Tabulating Machine Company. This company would later merge with two others in 1911 to form what is now called IBM.
A Petabyte is thousand TB, or a quadrillion bytes. It is estimated that all printed materials on Earth would represent approximately 200 PB of information.
IBM's largest disk system, the Scale-Out Network Attach Storage (SONAS) comprised of up to 7,200 disk drives, which can hold over 11 PB of information. A smaller 10-frame model, the same size as IBM Watson, with six interface nodes and 19 storage pods, could hold over 7 PB of information.
For those of us in the IT industry, 1TB is small potatoes. I for one, was expecting it to be much bigger. But for everyone else, the equivalent of 200 million pages of text that IBM Watson has loaded inside is an incredibly large repository of information. I suspect IBM Watson probably contains the complete works of Shakespeare as well as other fiction writers, the IMDB database, all 3.5 million articles of Wikipedia, religious texts like the Bible and the Quran, famous documents like the Magna Carta and the US Constitution, and reference books like a Dictionary, a Thesaurus, and "Gray's Anatomy". And, of course, lots and lots of lists.
For those on Twitter, follow [@ibmwatson] these next three days during the challenge.
The IBM Challenge was a big success. One of the contestants, Ken Jennings, [welcomes our new computer overlords]. Congratulations are in order to the IBM Research team who pulled off this Herculean effort!
Some folks have poked fun at some of the odd responses and wager amounts from the IBM Watson computer during the three-day tournament. Others were surprised as I was that the impressive feat was done with less than 1TB of stored data. Here is what John Webster wrote in CNET yesterday, in hist article [What IBM's Watson says to storage systems developers]:
"All well and good. But here's what I find most interesting as a result of what IBM has done in response to the Grand Challenge that motivated Watson's creators. We know, from Tony Pearson's blog, that the foundation of Watson's data storage system is a modified IBM SONAS cluster with a total of 21.6TB of raw capacity. But Pearson also reveals another very significant, and to me, surprising data point: "When Watson is booted up, the 15TB of total RAM are loaded up, and thereafter the DeepQA processing is all done from memory. According to IBM Research, the actual size of the data (analyzed and indexed text, knowledge bases, etc.) used for candidate answer generation and evidence evaluation is under 1 Terabyte."
What Pearson just said is that the data set Watson actually uses to reach his push-the-button decision would fit on a 1TB drive. So much for big data?"
To better appreciate how difficult the challenge was, and how a small amount of data can answer a billion different questions, I thought I would cover Business Intelligence, Data Retrieval and Text Mining concepts.
"In this paper, business is a collection of activities carried
on for whatever purpose, be it science, technology,
commerce, industry, law, government, defense, et cetera.
The communication facility serving the conduct of a business
(in the broad sense) may be referred to as an intelligence
system. The notion of intelligence is also defined
here, in a more general sense, as the ability to apprehend
the interrelationships of presented facts in such a way as
to guide action towards a desired goal."
Ideally, when you need "Business Intelligence" to help you make a better decision, you perform data retrieval from a structured database for the specific information you are looking for. In other cases, you might be looking for insight, patterns or trends. In that case, you go "data mining" against your structured databases.
Here's a simple example. John runs a fruit stand. One day, he kept track of how many apples and oranges were bought by men and women. How many questions can we ask against this small set of data? Let's count them:
How many apples were sold to men?
How many apples were sold to women?
How many oranges were sold to men?
How many oranges were sold to women?
But wait! For each row and column, we can combine them into totals.
How many apples were sold in total?
How many oranges were sold in total?
How many fruit in total were sold to men?
How many fruit in total were sold to women?
How many fruit in total were sold?
But wait, there's more! Each row and column can be evaluated for relative percentages, as well as percentages of each cell compared to the total. You could make five relevant pie-charts from this data. This results in 16 more questions, such as:
Of the fruit purchased by men, what percentage for apples?
Of all the apples purchased, what percentage by women?
And that's not including more ethereal questions, such as:
Are there gender-specific preferences for different types of fruit?
What type of fruit do men prefer?
This is just for a small set, two market segments (by gender) and two products (apples and oranges). However, if you have many market segments (perhaps by age group, zip code, etc.) and many products, the number of queries that can be supported is huge. For small sets of data, you can easily do this with a spreadsheet program like IBM Lotus Symphony or Microsoft Excel.
But why limit yourself to two dimensions? The above example was just for one day's worth of activity, if John captures this data for every day for historical and seasonal trending, it can be represented as a three-dimensional cube. The number of queries becomes astronomical. This is the basis for Online Analytical Processing (OLAP), and three-dimensional tables are often referred to as [OLAP cubes].
Back in 1970, IBM invented the Structured Query Language [SQL], and today, nearly all modern relational databases support this, including IBM DB2, Informix, Microsoft SQL Server, and Oracle DB. SQL poses two challenges. First, you had to structure the data in advance to the way you expect to perform your ad-hoc queries. Deciding the groups and categories in advance can limit the way information is recorded and captured.
Second, you had to be skilled at SQL to phrase your queries correctly to retrieve the data you are after. What ended up happening was that skilled SQL programmers would develop "canned reports" with fixed SQL parameters, so that less-skilled business decision makers could base their decisions from these reports.
IBM has fully integrated stacks to help process structured data, combining servers, storage, and advanced analytics software into a complete appliance. IBM offers the [Smart Analytics System] for robust, customized deployments, and recently acquired [Netezza] for pre-configured, and more rapid deployments.
However, the bigger problem is that more than 80 percent of information is not structured!
Semi-structured data like email provides some searchable fields like From and Subject. The rest of the information is unstructured, such as text files, photographs, video and audio. To look for specific information in unstructured sources can be like looking for a needle in a haystack, and trying to get insight, patterns or trends involves text mining.
This, in effect, is what IBM Watson was able to perform so well this week. Finding the needle in the haystacks of unstructured data from 200 million pages of text stored in its system, combined with the ability to apprehend the interrelationships of meaning and subtle nuance, resulted in an impressive technology demonstration. Certainly, this new technology will be powerful for a variety of use cases across a broad set of industries!
Continuing on the [IBM Storage Launch of February 9], John Sing has offered to write the following guest post about the [announcement] of IBM Scale Out Network Attached Storage [IBM SONAS]. John and I have known each other for a while, traveled the world to work with clients and speak at conferences. He is an Executive IT Consultant on the SONAS team.
Guest Post written by John Sing, IBM San Jose, California
What is IBM SONAS? It’s many things, so let’s start with this list:
It’s IBM’s delivery of a productized, pre-packaged Scale Out NAS global virtual file server, delivered in a easy-to-use appliance
IBM’s solution for large enterprise file-based storage requirements, where massive scale in capacity and extreme performance is required, especially for today’s modern analytics-based Competitive Advantage IT applications
Scales to many petabytes of usable storage and billions of files in a single global namespace
Provides integrated central management, central deployment of petabyte levels of storage
Modular commercial-off-the-shelf [COTS] building blocks. I/O, storage, network capacity scale independently of each other. Up to 30 interface nodes and 60 storage nodes, in an IBM General Parallel File System [GPFS]-based cluster. Each 10Gb CEE interface node port is capable of streaming at 900 MB/sec
Files are written in block-sized chunks, striped over as many multiple disk drives in parallel – aggregating throughput on a massive scale (both read and write), as well as providing auto-tuning, auto-balancing
Functionality delivered via one program product, IBM SONAS Software, which provides all of above functions, along with clustered CIFS, NFS v2/v3 with session auto-failover, FTP, high availability, and more
IBM SONAS makes automated tiered storage achievable and realistic at petabyte levels:
Integrated high performance parallel scan engine capable of identifying files at over 10 million files per minute per node
Integrated parallel data movement engine to physically relocate the data within tiered storage
And we’re just scratching the surface. IBM has plans to deploy additional protocols, storage hardware options, and software features.
However, the real question of interest should be, “who really needs that much storage capacity and throughput horsepower?”
The answer may surprise you. IMHO, the answer is: almost any modern enterprise that intends to stay competitive. Hmmm…… Consider this: the reason that IT exists today is no longer to simply save cost (that may have been true 10 years ago). Everyone is reducing cost… but how much competitive advantage is purchased through “let’s cut our IT budget by 10% this year”?
Notice that in today’s world, there are (many) bright people out there, changing our world every day through New Intelligence Competitive Advantage analytics-based IT applications such as real time GPS traffic data, real time energy monitoring and redirection, real time video feed with analytics, text analytics, entity analytics, real time stream computing, image recognition applications, HDTV video on demand, etc. Think of how GPS industry, cell phone / Twitter / Facebook, iPhone and iPad applications, as examples, are creating whole new industries and markets almost overnight.
Then start asking yourself, “What's behind these Competitive Advantage IT applications – as they are the ones that are driving all my storage growth? Why do they need so much storage? What do those applications mean for my storage requirements?”
To be “real-time”, long-held IT paradigms are being broken every day. Things like “data proximity”: we can no longer can extract terabytes of data from production databases and load them to a data warehouse – where’s the “real-time” in that? Instead, today’s modern analytics-based applications demand:
Multiple processes and servers (sometimes numbering in the 100s) simultaneously ….
Running against hundreds of terabytes of data of live production data, streaming in from expanding number of smarter sensors, input devices, users
Producing digital image-intensive results that must be programatically sent to an ever increasing number of mobile devices in geographically dispersed storage
Requiring parallel performance levels, that used to be the domain only of High Performance Computing (HPC)
This is a major paradigm shift in storage – and that is the solution and storage capabilities that IBM SONAS is designed to address. And of course, you should be able to save significant cost through the SONAS global virtual file server consolidation and virtualization as well.
Certainly, this topic warrants more discussion. If you found it interesting, contact me, your local IBM Business Partner or IBM Storage rep to discuss Competitive Advantage IT applications and SONAS further.
Are you tired of hearing about Cloud Computing without having any hands-on experience? Here's your chance. IBM has recently launched its IBM Development and Test Cloud beta. This gives you a "sandbox" to play in. Here's a few steps to get started:
Generate a "key pair". There are two keys. A "public" key that will reside in the cloud, and a "private" key that you download to your personal computer. Don't lose this key.
Request an IP address. This step is optional, but I went ahead and got a static IP, so I don't have to type in long hostnames like "vm353.developer.ihost.com".
Request storage space. Again, this step is optional, but you can request a 50GB, 100GB and 200GB LUN. I picked a 200GB LUN. Note that each instance comes with some 10 to 30GB storage already. The advantage to a storage LUN is that it is persistent, and you can mount it to different instances.
Start an "instance". An "instance" is a virtual machine, pre-installed with whatever software you chose from the "asset catalog". These are Linux images running under Red Hat Enterprise Virtualization (RHEV) which is based on Linux's kernel virtual machine (KVM). When you start an instance, you get to decide its size (small, medium, or large), whether to use your static IP address, and where to mount your storage LUN. On the examples below, I had each instance with a static IP and mounted the storage LUN to /media/storage subdirectory. The process takes a few minutes.
So, now that you are ready to go, what instance should you pick from the catalog? Here are three examples to get you started:
IBM WebSphere sMASH Application Builder
Base OS server to run LAMP stack
Next, I decided to try out one of the base OS images. There are a lot of books on Linux, Apache, MySQL and PHP (LAMP) which represents nearly 70 percent of the web sites on the internet. This instance let's you install all the software from scratch. Between Red Hat and Novell SUSE distributions of Linux, Red Hat is focused on being the Hypervisor of choice, and SUSE is focusing on being the Guest OS of choice. Most of the images on the "asset catalog" are based on SLES 10 SP2. However, there was a base OS image of Red Hat Enterprise Linux (RHEL) 5.4, so I chose that.
To install software, you either have to find the appropriate RPM package, or download a tarball and compile from source. To try both methods out, I downloaded tarballs of Apache Web Server and PHP, and got the RPM packages for MySQL. If you just want to learn SQL, there are instances on the asset catalog with DB2 and DB2 Express-C already pre-installed. However, if you are already an expert in MySQL, or are following a tutorial or examples based on MySQL from a classroom textbook, or just want a development and test environment that matches what your company uses in production, then by all means install MySQL.
This is where my SSH client comes in handy. I am able to login to my instance and use "wget" to fetch the appropriate files. An alternative is to use "SCP" (also part of PuTTY) to do a secure copy from your personal computer up to the instance. You will need to do everything via command line interface, including editing files, so I found this [VI cheat sheet] useful. I copied all of the tarballs and RPMs on my storage LUN ( /media/storage ) so as not to have to download them again.
Compiling and configuring them is a different matter. By default, you login as an end user, "idcuser" (which stands for IBM Developer Cloud user). However, sometimes you need "root" level access. Use "sudo bash" to get into root level mode, and this allows you to put the files where they need to be. If you haven't done a configure/make/make install in awhile, here's your chance to relive those "glory days".
In the end, I was able to confirm that Apache, MySQL and PHP were all running correctly. I wrote a simple index.php that invoked phpinfo() to show all the settings were set correctly. I rebooted the instance to ensure that all of the services started at boot time.
Rational Application Developer over VDI
This last example, I started an instance pre-installed with Rational Application Developer (RAD), which is a full Integrated Development Environment (IDE) for Java and J2EE applications. I used the "NX Client" to launch a virtual desktop image (VDI) which in this case was Gnome on SLES 10 SP2. You might want to increase the screen resolution on your personal computer so that the VDI does not take up the entire screen.
From this VDI, you can launch any of the programs, just as if it were your own personal computer. Launch RAD, and you get the familiar environment. I created a short Java program and launched it on the internal WebSphere Application Server test image to confirm it was working correctly.
If you are thinking, "This is too good to be true!" there is a small catch. The instances are only up and running for 7 days. After that, they go away, and you have to start up another one. This includes any files you had on the local disk drive. You have a few options to save your work:
Copy the files you want to save to your storage LUN. This storage LUN appears persistent, and continues to exist after the instance goes away.
Take an "image" of your "instance", a function provided in the IBM Developer and Test Cloud. If you start a project Monday morning, work on it all week, then on Friday afternoon, take an "image". This will shutdown your instance, and backup all of the files to your own personal "asset catalog" so that the next time you request an instance, you can chose that "image" as the starting point.
Another option is to request an "extension" which gives you another 7 days for that instance. You can request up to five unique instances running at the same time, so if you wanted to develop and test a multi-host application, perhaps one host that acts as the front-end web server, another host that does some kind of processing, and a third host that manages the database, this is all possible. As far as I can tell, you can do all the above from either a Windows, Mac or Linux personal computer.
Getting hands-on access to Cloud Computing really helps to understand this technology!
In my post yesterday [Spreading out the Re-Replication process], fellow blogger BarryB [aka The Storage Anarchist]raises some interesting points and questions in the comments section about the new IBM XIV Nextra architecture.I answer these below not just for the benefit of my friends at EMC, but also for my own colleagues within IBM,IBM Business Partners, Analysts and clients that might have similar questions.
If RAID 5/6 makes sense on every other platform, why not so on the Web 2.0 platform?
Your attempt to justify the expense of Mirrored vs. RAID 5 makes no sense to me. Buying two drives for every one drive's worth of usable capacity is expensive, even with SATA drives. Isn't that why you offer RAID 5 and RAID 6 on the storage arrays that you sell with SATA drives?
And if RAID 5/6 makes sense on every other platform, why not so on the (extremely cost-sensitive) Web 2.0 platform? Is faster rebuild really worth the cost of 40+% more spindles? Or is the overhead of RAID 6 really too much for those low-cost commodity servers to handle.
Let's take a look at various disk configurations, for example 3TB on 750GB SATA drives:
JBOD: 4 drives
JBOD here is industry slang for "Just a Bunch of Disks" and was invented as the term for "non-RAID".Each drive would be accessible independently, at native single-drive speed, with no data protection. Puttingfour drives in a single cabinet like this provides simplicity and convenience only over four separate drivesin their own enclosures.
RAID-10: 8 drives
RAID-10 is a combination of RAID-1 (mirroring) and RAID-0 (striping). In a 4x2 configuration, data is striped across disks 1-4,then these are mirrored across to disks 5-8. You get performance improvement and protection against a singledrive failure.
RAID-5: 5 drives
This would be a 4+P configuration, where there would be four drives' worth of data scattered across fivedrives. This gives you almost the same performance improvement as RAID-10, similar protection againstsingle drive failure, but with fewer drives per usable TB capacity.
RAID-6: 6 drives
This would be a 4+2P configuration, where the first P represents linear parity, and the second represents a diagonal parity. Similar in performance improvement as RAID-5, but protects against single and double drive failures, and still better than RAID-10 in terms of drives per TB usable capacity.
For all the RAID configurations, rebuild would require a spare drive, but often spares are shared among multiple RAID ranks, not dedicated to a single rank. To this end, you often have to have several spares per I/O loop, and a different set of spares for each kind of speed and capacity. If you had a mix of 15K/73GB, 10K/146GB, and 7200/500GB drives, then you would have three sets of spares to match.
In contrast, IBM XIV's innovative RAID-X approach doesn't requireany spare drives, just spare capacity on existing drives being used to hold data. The objects can be mirroredbetween any two types of drives, so no need to match one with another.
All of these RAID levels represent some trade-off between cost, protection and performance, and IBM offers each of theseon various disk systems platforms. Calculating parity is more complicated than just mirrored copies, but this can be done with specialized chips in cache memory to minimize performance impact.IBM generally recommends RAID-5 for high-performance FC disk, and RAID-6 for slower, large capacity SATA disk.
However, the questionassumes that the drive cost is a large portion of the overall "disk system" cost. It isn't. For example,Jon Toigo discusses the cost of EMC's new AX4 disk system in his post [National Storage Rip-Off Day]:
EMC is releasing its low end Clariion AX4 SAS/SATA array with 3TB capacity for $8600. It ships with four 750GB SATA drives (which you and I could buy at list for $239 per unit). So, if the disk drives cost $956 (presumably far less for EMC), that means buyers of the EMC wares are paying about $7700 for a tin case, a controller/backplane, and a 4Gbps iSCSI or FC connector. Hmm.
Dell is offering EMC’s AX4-5 with same configuration for $13,000 adding a 24/7 warranty.
(Note: I checked these numbers. $8599 is the list price that EMC has on its own website. External 750GB drivesavailable at my local Circuit City ranged from $189 to $329 list price. I could not find anything on Dell'sown website, but found [The Register] to confirm the $13,000 with 24x7 warranty figure.)
Disk capacity is a shrinking portion of the total cost of ownership (TCO). In addition to capacity, you are paying forcache, microcode and electronics of the system itself, along with software and services that are included in the mix,and your own storage administrators to deal with configuration and management. For more on this, see [XIV storage - Low Total Cost of Ownership].
EMC Centera has been doing this exact type of blob striping and protection since 2002
As I've noted before, there's nothing "magic" about it - Centera has been employing the same type of object-level replication for years. Only EMC's engineers have figured out how to do RAID protection instead of mirroring to keep the hardware costs low while not sacrificing availability.
I agree that IBM XIV was not the first to do an object-level architecture, but it was one of the first to apply object-level technologies to the particular "use case" and "intended workload" of Web 2.0 applications.
RAID-5 based EMC Centera was designed insteadto hold fixed-content data that needed to be protected for a specific period of time, such as to meet government regulatory compliance requirements. This is data that you most likelywill never look at again unless you are hit with a lawsuit or investigation. For this reason, it is important to get it on the cheapest storage configuration as possible. Before EMC Centera, customers stored this data on WORM tape and optical media, so EMC came up with a disk-only alternative offering.IBM System Storage DR550 offers disk-level access for themost recent archives, with the ability to migrate to much less expensive tape for the long term retention. The end result is that storing on a blended disk-plus-tape solution can help reduce the cost by a factor of 5x to 7x, making RAID level discussion meaningless in this environment. For moreon this, see my post [OptimizingData Retention and Archiving].
While both the Centera and DR550 are based on SATA, neither are designed for Web 2.0 platforms.When EMC comes out with their own "me, too" version, they will probably make a similar argument.
IBM XIV Nextra is not a DS8000 replacement
Nextra is anything but Enterprise-class storage, much less a DS8000 replacement. How silly of all those folks to suggest such a thing.
I did searches on the Web and could not find anybody, other than EMC employees, who suggested that IBM XIV Nextra architecture represented a replacement for IBM System Storage DS8000. The IBM XIV press release does not mentionor imply this, and certainly nobody I know at IBM has suggested this.
The DS8000 is designed for a different "use case" andset of "intended workloads" than what the IBM XIV was designed for. The DS8000 is the most popular disk systemfor our IBM System z mainframe platform, for activities like Online Transaction Processing (OLTP) and large databases, supporting ESCON and FICON attachment to high-speed 15K RPM FC drives. Web 2.0 customers that might chooseIBM XIV Nextra for their digital content might run their financial operations or metadata search indexes on DS8000.Different storage for different purposes.
As for the opinion that this is not "enterprise class", there are a variety of definitions that refer to this phrase.Some analysts look at "price band" of units that cost over $300,000 US dollars. Other analysts define this as beingattachable to mainframe servers via ESCON or FICON. Others use the term to refer to five-nines reliability, havingless than 5 minutes downtime per year. In this regard, based on the past two years experience at 40 customer locations,I would argue that it meets this last definition, with non-disruptive upgrades, microcode updates and hot-swappable components.
By comparison, when EMC introduced its object-level Centera architecture, nobody suggested it was the replacement for their Symmetrix or CLARiiON devices. Was it supposed to be?
Given drive growth rates have slowed, improving utilization is mandatory to keep up with 60-70 percent CAGR
Look around you, Tony- all of your competitors are implementing thin provisioning specifically to drive physical utilization upwards towards 60-80%, and that's on top of RAID 5/RAID 6 storage and not RAID 1. Given that disk drive growth rates and $/GB cost savings have slowed significantly, improving utilization is mandatory just to keep up with the 60-70% CAGR of information growth.
Disk drive capacities have slowed for FC disk because much of the attention and investment has been re-directed to ATA technology. Dollar-per-GB price reduction is slowing for disks in general, as researchers are hitting physicallimitations to the amount of bits they can pack per square inch of disk media, and is now around 25 percent per year.The 60-70 percent Compound Annual Growth Rate (CAGR) is real, and can be even growing faster for Web 2.0providers. While hardware costs drop, the big ticket items to watch will be software, services and storage administrator labor costs.
To this end, IBM XIV Nextra offers thin provisioning and differential space-efficient snapshots. It is designed for 60-90 percent utilization, and can be expanded to larger capacities non-disruptively in a very scalable manner.
(Note: The following paragraphs have been updated to clarify the performance tests involved.)
This time, IBM breaks the 1 million IOPS barrier, achieved by running a test workload consisting of a 70/30 mix of random 4K requests. That is 70 percent reads, 30 percent writes, with 4KB blocks. The throughput achieved was 3.5x times that obtained by running the identical workload on the fastest IBM storage system today (IBM System Storage SAN Volume Controller 4.3),
and an estimated EIGHT* times the performance of EMC DMX. With an average response time under 1 millisecond, this solution would be ideal for online transaction processing (OLTP) such as financial recordings or airline reservations.
(*)Note: EMC has not yet published ANY benchmarks of their EMC DMX box with SSD enterprise flash drives (EFD). However, I believe that the performance bottleneck is in their controller and not the back-end SSD or FC HDD media, so I have givenEMC the benefit of the doubt and estimated that their latest EMC DMX4 is as fast as an[IBMDS8300 Turbo] with Fibre Channel drives. If or when EMC publishes benchmarks, the marketplace can make more accurate comparisons. Your mileage may vary.
IBM used 4 TB of Solid State Disk (SSD) behind its IBM SAN Volume Controller (SVC) technology to achieve this amazing result. Not only does this represent a significantly smaller footprint, but it uses only 55 percent of the power and cooling.
The SSD drives are made by [Fusion IO] and are different than those used by EMC made by STEC.
The SVC addresses the one key problem clients face today with competitive disk systems that support SSD enterprise flash drives: choosing what data to park on those expensive drives? How do you decide which LUNs, which databases, or which files should be permanently resident on SSD? With SVC's industry-leading storage virtualization capability, you are not forced to decide. You can move data into SSD and back out again non-disruptively, as needed to meet performance requirements. This could be handy for quarter-end or year-end processing, for example.
My series last week on IBM Watson (which you can read [here], [here], [here], and [here]) brought attention to IBM's Scale-Out Network Attached Storage [SONAS]. IBM Watson used a customized version of SONAS technology for its internal storage, and like most of the components of IBM Watson, IBM SONAS is commercially available as a stand-alone product.
Like many IBM products, SONAS has gone through various name changes. First introduced by Linda Sanford at an IBM SHARE conference in 2000 under the IBM Research codename Storage Tank, it was then delivered as a software-only offering SAN File System, then as a services offering Scale-out File Services (SoFS), and now as an integrated system appliance, SONAS, in IBM's Cloud Services and Systems portfolio.
If you are not familiar with SONAS, here are a few of my previous posts that go into more detail:
This week, IBM announces that SONAS has set a world record benchmark for performance, [a whopping 403,326 IOPS for a single file system]. The results are based on comparisons of publicly available information from Standard Performance Evaluation Corporation [SPEC], a prominent performance standardization organization with more than 60 member companies. SPEC publishes hundreds of different performance results each quarter covering a wide range of system performance disciplines (CPU, memory, power, and many more). SPECsfs2008_nfs.v3 is the industry-standard benchmark for NAS systems using the NFS protocol.
(Disclaimer: Your mileage may vary. As with any performance benchmark, the SPECsfs benchmark does not replicate any single workload or particular application. Rather, it encapsulates scores of typical activities on a NAS storage system. SPECsfs is based on a compilation of workload data submitted to the SPEC organization, aggregated from tens of thousands of fileservers, using a wide variety of environments and applications. As a result, it is comprised of typical workloads and with typical proportions of data and metadata use as seen in real production environments.)
The configuration tested involves SONAS Release 1.2 on 10 Interface Nodes and 8 Storage Pods, resulting a single file system over 900TB usable capacity.
10 Interface Nodes; each with:
Maximum 144 GB of memory
One active 10GbE port
8 Storage Pods; each with:
2 Storage nodes and 240 drives
Drive type: 15K RPM SAS hard drives
Data Protection using RAID-5 (8+P) ranks
Six spare drives per Storage Pod
IBM wanted a realistic "no compromises" configuration to be tested, by choosing:
Regular 15K RPM SAS drives, rather than a silly configuration full of super-expensive Solid State Drives (SSD) to plump up the results.
Moderate size, typical of what clients are asking for today. The Goldilocks rule applies. This SONAS is not a small configuration under 100TB, and nowhere close to the maximum supported configuration of 7,200 disks across 30 Interface Nodes and 30 Storage Pods.
Single file system, often referred to as a global name space, rather than using an aggregate of smaller file systems added together that would be more complicated to manage. Having multiple file systems often requires changes to applications to take advantage of the aggregate peformance. It is also more difficult to load-balance your performance and capacity across multiple file systems. Of course, SONAS can support up to 256 separate file systems if you have a business need for this complexity.
The results are stunning. IBM SONAS handled three times more workload for a single file system than the next leading contender. All of the major players are there as well, including NetApp, EMC and HP.
However, I have to assume his real question is ... "what is the quick and easy way for me to build a lightweight database app like Microsoft Access that I can distribute as a standalone executable?"
To which I would say "Lotus has a program called Approach, which is part of Lotus SmartSuite, which some people still use. However, a lot of the focus in IBM now centers around the lightweight Cloudscape database which IBM acquired from Informix, which is now known as the [open source project called Derby]. Many IBM and Lotus products, such as Lotus Expeditor use the JDBC connection to Derby, which allows you to use Windows, Linux, Flash, etc. ... with no vendor lock in".
I am familiar with Cloudscape, and I evaluated it as a potential database for IBM TotalStorage Productivity Center, when I was the lead architect defining the version 1 release. It runs entirely on Java, which is both a plus and minus. Plus in that it runs anywhere Java runs, but a minus in that it is not optimized for high performance or large scalability. Because of this, we decided instead on using the full commercial DB2 database instead for Productivity Center.
Not to be undone, my colleagues over at DB2 offered a different alternative, [DB2 Express-C], which runs on a variety of Windows, Linux-x86, and Linux on POWER platforms. It is "free" as in beer, not free as in speech, which means you can download and use it today at no charge, and even ship products with it included, but you are not allowed to modify and distribute altered versions of it, as you can with "free as in speech" open source code, as in the case of Derby above (see [Apache License 2.0"] for details).
As I see it, DB2 Express-C has two key advantages. First, if you like the free version, you can purchase a "support contract" for those that need extra hand-holding, or are using this as part of a commercial business venture. Second,for those who do prefer vendor lock-in, it is easyto upgrade Express-C to the full IBM DB2 database product, so if you are developing a product intended for use with DB2, you can develop it first with DB2 Express-C, and migrate up to full DB2 commercial version when you are ready.
This is perhaps more information than you probably expected for such a simple question. Meanwhile, I am stilltrying to figure out MySQL as part of my [OLPC volunteer project].
In preparation for my [upcoming trip to Australia and New Zealand], I decided to upgrade my smartphone. My service provider T-Mobile offered me the chance to try out any new phone for 14 days for only ten dollar re-stocking fee. For the past 16 months, I have used the Google G1 phone. This is based on a storage-optimized Android operating system, based on open source Linux, with applications processed in a storage-optimized virtual machine called Dalvik, based on open source Java. According to Wikipedia, Android-based phones have #1 market share [outselling both BlackBerry OS and Apple iOS phones]. There are over 70 different companies using Android, driven away from the proprietary interfaces from Apple, BlackBerry and Microsoft.
Since I was already familiar with the Android operating system, I chose the Samsung Galaxy S Vibrant. I liked my G1, but it had only a small amount of internal memory to store applications. The G1 supported an external Micro SDHC card, but this only was used for music and photos. There was no way to install applications on the memory card, so I found myself having to uninstall applications to make room for new ones. By contrast, the Vibrant has 16GB internal memory, plenty of room for all applications, and supports Micro SDHC up to 32GB in size. My model can pre-installed with a 2GB card, of which 1.4GB is consumed by James Cameron's full-length movie Avatar. On the G1, swapping out memory cards was relatively easy. On the Vibrant, you have to take the phone apart to swap out cards, so I won't be doing that very often. I will probably just get a 32GB card and leave it in there permanently.
(FTC disclosure: I work for IBM. IBM has working relationships with Oracle, Google, and lots of other companies. IBM offers its own commercial version of Java related tools. I own stock in IBM, Apple, Google. I have friends and family who work at Microsoft. My review below is based entirely on my own experience of my new Samsung Galaxy S Vibrant phone. Samsung has created different models for different service providers. The T-Mobile Vibrant is an external USB storage device with telephony capabilities, comparable to the AT&T Captivate, Verizon Fascinate, or Sprint Epic 4G. The majority of mobile phones in the world contain IBM technology. This post is not necessarily an endorsement for Samsung over other smartphone manufacturers, nor T-Mobile over other service providers. I provide this information in context of storage optimization, state-of-the-art for smartphones in general, and disputes related to software patents between companies. I hold 19 patents, most of which are software patents.)
When Oracle acquired Sun Microsystems, it inherited stewardship of Java. Java is offered in two flavors. Java Standard Edition (SE) for machines that are planted firmly on or below your desk, and Java Micro Edition (ME) for machines that are carried around. Most Java-based phones limit themselves to Java ME, but Google decided to base its smartphones on the more powerful Java SE, but then optimize for the limited storage and computing resources. These two levels of Java have radically different licensing terms and conditions, so Larry Ellison of Oracle cried foul. On The Register, Gavin Clarke has an excellent article with details of the Oracle-vs-Google complaint. Daniel Dilger opines that Oracle [might kill Google’s Android and software patents all at once]. Fellow blogger Mark Twomey (EMC) on his StorageZilla blog, argues that [it's not about Android phones, but Android everything].
My Vibrant is roughly the size of a half-inch stack of 3x5 index cards in my hand. In my humble opinion, the problem is the grey area between mobile phone and the desktop personal computer. Laptops, netbooks, iPads, tablet computers, eBook readers, and smartphones fall somewhere in between. At what point do you stop licensing Java SE and start licensing Java ME instead?
Let's take a look at all the stuff my new Samsung Vibrant can do, and let you decide for yourself. I have 140 applications installed, which I can access alphabetically. I also have up to seven screens which I can fill with application icons and widgets to simplify access. The screen measures about 4 inches diagonally. Click on each image below to see the full 480x800 resolution.
Each screen has five rows. On my first screen, I have the first two rows related to photography. This includes a camera, camcorder, bar-code scanner and visual search engine (Google Goggles). I am not happy with Flickr Droid app in uploading photos, so I might need to find another app for that. Other reviews I read complain that the Vibrant's camera does not have am LED flash for night time shots, and that there is no forward facing camera to do Skype or FaceTime-style videoconferencing. I think it is fine the way it is. An interesting feature of the camera app is that it uses the volume up/down buttons to zoom in and out.
The next two rows related to books and documents. In addition to both Amazon's Kindle and Barnes and Noble's Nook eBook readers, I have Dropbox to make it easy to transfer files between all my machines, a camera-scanner that generates PDFs, and ThinkFree, which appears to be based on OpenOffice open source software to create, view and edit WORD documents, EXCEL spreadsheets and PowerPoint presentations.
My second screen is for music and video entertainment.
The top row is consumed by a single widget for [Pandora], an internet radio station, not to be confused with the Pandora moon that the movie Avatar is based on. I-heart-radio, Slacker, and Last.fm are other internet radio stations. Be careful when roaming in another country, as the $15-per-MB transfer fees can really add up. While the Galaxy S has a built-in FM radio, T-Mobile has decided to disable this feature in its Vibrant model, in favor of internet-based radio stations.
I am glad the Samsung Vibrant uses the same 3.5mm combo audio jack that I mentioned in my blog post about my
[New ThinkPad T410]. This allows me to use the same headset for both my laptop and my cell phone.
For those who use Microsoft Windows Media Player v10 or above, this phone lets you transfer over your songs, playlists and videos via the USB cable in PMC mode. The TED application shows 18-minute videos of lectures at conferences that focus on Technology, Entertainment and Design. MobiTV offers live streaming of popular Television shows, normally ten dollars monthly, but I got a free 30-day trial in the deal.
Screen 3 is focused on travel. I have a 30-day free trial of GoGo, the new Wi-Fi networks on various airlines. Hopefully, I will get to try this out on my upcoming flights. When GoGo is not available, the Extended Controls widget allows me to turn the phone into "Airplane mode", which would allow me to read eBooks and listen to pre-recorded music and videos stored on my phone. Most of the apps on Android are free, but Extended Controls, shown here in the top row, cost me money but well worth it. With this you can customize different size widgets with all the appropriate setting toggles you want. On this one, I can toggle Wi-Fi, Data transfer, GPS positioning, and Airplane mode.
Google Maps, Google Places and Google Sky Map are all well represented here. I also like TripIt, which is a free Software-as-a-Service for managing your trip itenerary, and syncs up with their online website. Currency and Language translation can help on international travel. The standard Alarm Clock also includes Time Zone conversion as well.
My screen 4 is my central home page. There are four buttons on the bottom of the phone: Menu, Home, Back, and Search. Hit the "Home" button on any screen, and it jumps immediately to Screen 4. From here, I can get to any of the other screens with just swiping my finger across the surface. Therefore, I chose to keep this screen simple.
For meetings, I have a big clock, and an Extended Controls widget to set my phone on silent/vibrate mode, and show my battery status. I put icons here for apps that I might need in a hurry, like Camera, Evernote, or Shazam. For those not familiar with Shazam, it will listen to the microphone for whatever song is playing in the background where you are, and it will identify the song's title and artist.
The "Starred" folder lists those five or so contacts that I have marked with a "star" to be on this short list. From here, I can call or send them an SMS text message.
Screen 5 is for office productivity. I have a 2x2 widget from Astrid to list my to-do items. I have a 1x2 widget showing my last call. My calendar syncs up with my Google calendar online.
The Locale widget allows me to change which on-screen keyboard to use. There is the standard Android keyboard which allows voice-to-text input, the Samsung keyboard that offers [XT9 mode], and the new ["Swype"] keyboard that allows you to write words quickly with squiggles swiped across the keyboard. The Swype is incredible accurate when I am typing in English. When I am communicating in Spanish, it gets in the way, spell-checking when it shouldn't.
Screen 6 is for my social media, news and search facilities. I have HootSuite Lite for managing my Twitter and Facebook posts. For news junkies, NPR, USA Today and CNN all offer mobile versions.
I have a selection of browsers, including Opera Mini 5, and Dolphin Browser HD. The latter offers a variety of special add-ons similar to Firefox on a desktop system. I also have specialty search sites, including the Internet Movie Database (IMDB), Fandango for local movie times, and Dex for local phone listings.
Screen 7 is for system administration. The top row is another "Extended Controls" widget, this time to change between 2G and 3G networks, brightness setting, set the the time-out interval for when the screen should automatically shut off, and a "stay awake" to turn off the screen saver altogether.
I can do some really powerful things here. For example, I have an application to let me use secure shell (ssh) to access our systems at work. I also can "tether" my laptop to my Vibrant, for those few times when Wi-Fi is not available, to let my laptop use the phone's signal as a dial-up modem. It is slower than Wi-Fi, but might be just what I need in a pinch.
The bottom row is the same across all seven screens, which you can customize. I left the bottom row in its original default, with options to make phone calls, look up contacts, and send text messages. The bottom right corner launches a list of all applications alphabetically, to access those not on my seven main screens.
Just in case I switch to a local SIM card while abroad in another country, I asked T-mobile to unlock my phone, which they happily did at no additional charge. For example, while I am in Australia, I can either leave my T-Mobile USA chip in the phone, and pay roaming charges per minute, or I can purchase a SIM chip from a local phone company with pre-paid minutes. This often includes unlimited free incoming calls to a local Australian phone number, and voicemail.
Unlocking the phone to use different SIM cards is different than "jailbreaking", a term that refers to Apple's products. For Android phones, jailbreaking is called "rooting", as the process involves getting "root" user access that you normally don't have. The only reason I have found to have my phone "rooted" was to take these lovely screen shots, using the "Screen Shot It" application. This is another application that I paid for. I used the free trial for a few screenshots first to check it out, liked the results, and bought the application.
So, this new smartphone looks like a keeper. I got a screen protector to avoid scratching, and a two-piece case that snaps around the phone to give it more heft. All my chargers are "Mini USB" for my old G1 phone, and this new Vibrant phone is "Micro USB" instead, so I had to order new ones for my car, my office, and for my iGo (tip A97).
This review is more to focus on the fact that the IT industry is changing, and what was traditionally performed on personal computers are now being done on new handheld devices. Android provides a platform for innovation and healthy competition. Let's all hope Oracle and Google can work out their differences amicably.
Last week, I got the following comment from Bob Swann:
I am looking for the IBM VM Poster or a picture of the IBM VM "Catch the Wave"
Do you know where I might find it?
Well, Bob, I made some phone calls. The company that published these posters no longer exists, butI found a coworker at the Poughkeepsie Briefing Center who still had the poster on his wall, and he was kind enough to take a picture of it for you.
VM: The Wave of the Future (click thumbnail at left to see larger image)
Some may recognize this as a [mash-up] using as a base the famous Japanese 10-inch by 15-inch block print[The Great Wave off Kanagawa] byartist [Katsushika Hokusai]. I had this as my laptop'swallpaper screen image until last year when I was presenting in Kuala Lumpur, Malaysia. I was told that it reminded people about the horrible tsunami caused by the [Indian Ocean earthquake] back in 2004.I was actually scheduled to fly the last week of December 2004 to Jakarta, Indonesia, but at the last minute ourclient team changed plans. I would have been on route over the Pacific ocean when the tsunami hit, and probably stranded over there for weeks or months until the airports re-opened.
The Wave theme was in part to honor the IBM users group called World Alliance VSE VM and Linux (WAVV) which is havingtheir next meeting [April 18-22, 2008] in Chattanooga, Tennessee. I presentedat this conference back in 1996 in Green Bay, Wisconsin, as part of the IBM Linux for S/390 team. It started onthe Sunday that Wisconsin switched their clocks for [DaylightSaving Time], and the few of us from Arizona or other places that don't both with this, all showed up forbreakfast an hour early.
When I was in Australia last year, I was told the wave that sports fans do, by raising their hands in coordinatedsequence, was called the [Mexican Wave]in most other countries. When I was there, Melbourne was trying to outlaw this practice at their cricket matches.
The "wave" represents a powerful metaphor, from z/VM operating system on System z mainframes to VMware and Xenon Intel-based processor machines, as the direction of virtualization that we are heading for future data centers.The Mexican wave represents a glimpse of what humans can accomplish with collaboration on a globalscale. It can also represent the tidal wave of data arising from nearly 60 percent annual growth instorage capacity. (I had to mention storage eventually, to avoid being completely off-topic on this post!)
I hope this is the graphic you were looking for Bob. If anyone else has wave-themed posters they would like to contribute, please post a comment below.
It's Tuesday, and that means more IBM announcements!
I haven't even finished blogging about all the other stuff that got announced last week, and here we are with more announcements. Since IBM's big [Pulse 2010 Conference] is next week, I thought I would cover this week's announcement on Tivoli Storage Manager (TSM) v6.2 release. Here are the highlights:
Client-Side Data Deduplication
This is sometimes referred to as "source-side" deduplication, as storage admins can get confused on which servers are clients in a TSM client-server deployment. The idea is to identify duplicates at the TSM client node, before sending to the TSM server. This is done at the block level, so even files that are similar but not identical, such as slight variations from a master copy, can benefit. The dedupe process is based on a shared index across all clients, and the TSM server, so if you have a file that is similar to a file on a different node, the duplicate blocks that are identical in both would be deduplicated.
This feature is available for both backup and archive data, and can also be useful for archives using the IBM System Storage Archive Manager (SSAM) v6.2 interface.
Simplified management of Server virtualization
TSM 6.2 improves its support of VMware guests by adding auto-discovery. Now, when you spontaneously create a new virtual machine OS guest image, you won't have to tell TSM, it will discover this automatically! TSM's legendary support of VMware Consolidated Backup (VCB) now eliminates the manual process of keeping track of guest images. TSM also added support of the Vstorage API for file level backup and recovery.
While IBM is the #1 reseller of VMware, we also support other forms of server virtualization. In this release, IBM adds support for Microsoft Hyper-V, including support using Microsoft's Volume Shadow Copy Services (VSS).
Automated Client Deployment
Do you have clients at all different levels of TSM backup-archive client code deployed all over the place? TSM v6.2 can upgrade these clients up to the latest client level automatically, using push technology, from any client running v5.4 and above. This can be scheduled so that only certain clients are upgraded at a time.
Simultaneous Background Tasks
The TSM server has many background administrative tasks:
Migration of data from one storage pool to another, based on policies, such as moving backups and archives on a disk pool over to a tape pools to make room for new incoming data.
Storage pool backup, typically data on a disk pool is copied to a tape pool to be kept off-site.
Copy active data. In TSM terminology, if you have multiple backup versions, the most recent version is called the active version, and the older versions are called inactive. TSM can copy just the active versions to a separate, smaller disk pool.
In previous releases, these were done one at a time, so it could make for a long service window. With TSM v6.2, these three tasks are now run simultaneously, in parallel, so that they all get done in less time, greatly reducing the server maintenance window, and freeing up tape drives for incoming backup and archive data. Often, the same file on a disk pool is going to be processed by two or more of these scheduled tasks, so it makes sense to read it once and do all the copies and migrations at one time while the data is in buffer memory.
Enhanced Security during Data Transmission
Previous releases of TSM offered secure in-flight transmission of data for Windows and AIX clients. This security uses Secure Socket Layer (SSL) with 256-bit AES encryption. With TSM v6.2, this feature is expanded to support Linux, HP-UX and Solaris.
Improved support for Enterprise Resource Planning (ERP) applications
I remember back when we used to call these TDPs (Tivoli Data Protectors). TSM for ERP allows backup of ERP applications, seemlessly integrating with database-specific tools like IBM DB2, Oracle RMAN, and SAP BR*Tools. This allows one-to-many and many-to-one configurations between SAP servers and TSM servers. In other words, you can have one SAP server backup to several TSM servers, or several SAP servers backup to a single TSM server. This is done by splitting up data bases into "sub-database objects", and then process each object separately. This can be extremely helpful if you have databases over 1TB in size. In the event that backing up an object fails and has to be re-started, it does not impact the backup of the other objects.
Continuing my week in Chicago, for the IBM Storage Symposium 2008, we had sessions that focused on individual products. IBM System Storage SAN Volume Controller (SVC) was a popular topic.
SVC - Everything you wanted to know, but were afraid to ask!
Bill Wiegand, IBM ATS, who has been working with SAN Volume Controller since it was first introduced in 2003. answered some frequently asked questions about IBM System Storage SAN Volume Controller.
Do you have to upgrade all of your HBAs, switches and disk arrays to the recommended firmware levels before upgrading SVC? No. These are recommended levels, but not required. If you do plan to update firmware levels, focus on the host end first, switches next, and disk arrays last.
How do we request special support for stuff not yet listed on the Interop Matrix?
Submit an RPQ/SCORE, same as for any other IBM hardware.
How do we sign up for SVC hints and tips? Go to the IBM
[SVC Support Site] and select the "My Notifications" under the "Stay Informed" box on the right panel.
When we call IBM for SVC support, do we select "Hardware" or "Software"?
While the SVC is a piece of hardware, there are very few mechanical parts involved. Unless there are sparks,
smoke, or front bezel buttons dangling from springs, select "Software". Most of the questions are
related to the software components of SVC.
When we have SVC virtualizing non-IBM disk arrays, who should we call first?
IBM has world-renown service, with some of IT's smartest people working the queues. All of the major storage vendors play nice
as part of the [TSAnet Agreement when a mutual customer is impacted.
When in doubt, call IBM first, and if necessary, IBM will contact other vendors on your behalf to resolve.
What is the difference between livedump and a Full System Dump?
Most problems can be resolved with a livedump. While not complete information, it is generally enough,
and is completely non-disruptive. Other times, the full state of the machine is required, so a Full System Dump
is requested. This involves rebooting one of the two nodes, so virtual disks may temporarily run slower on that
What does "svc_snap -c" do?The "svc_snap" command on the CLI generates a snap file, which includes the cluster error log and trace files from all nodes. The "-c" parameter includes the configuration and virtual-to-physical mapping that can be useful for
disaster recovery and problem determination.
I just sent IBM a check to upgrade my TB-based license on my SVC, how long should I wait for IBM to send me a software license key?
IBM trusts its clients. No software license key will be sent. Once the check clears, you are good to go.
During migration from old disk arrays to new disk arrays, I will temporarily have 79TB more disk under SVC management, do I need to get a temporary TB-based license upgrade during the brief migration period?
Nope. Again, we trust you. However, if you are concerned about this at all, contact IBM and they will print out
a nice "Conformance Letter" in case you need to show your boss.
How should I maintain my Windows-based SVC Master Console or SSPC server?
Treat this like any other Windows-based server in your shop, install Microsoft-recommended Windows updates,
run Anti-virus scans, and so on.
Where can I find useful "How To" information on SVC?
Specify "SAN Volume Controller" in the search field of the
[IBM Redbooks vast library of helpful books.
I just added more managed disks to my managed disk group (MDG), can I get help writing a script to redistribute the extents to improve wide-striping performance?
Yes, IBM has scripting tools available for download on
[AlphaWorks]. For example, svctools will take
the output of the "lsinfo" command, and generate the appropriate SVC CLI to re-migrate the disks around to optimize
performance. Of course, if you prefer, you can use IBM Tivoli Storage Productivity Center instead for a more
Any rules of thumb for sizing SVC deployments?
IBM's Disk Magic tool includes support for SVC deployments. Plan for 250 IOPS/TB for light workloads,
500 IOPS/TB for average workloads, and 750 IOPS/TB for heavy workloads.
Can I migrate virtual disks from one manage disk group (MDG) to another of different extent size?
Yes, the new Vdisk Mirroring capability can be used to do this. Create the mirror for your Vdisk between the
two MDGs, wait for the copy to complete, and then split the mirror.
Can I add or replace SVC nodes non-disruptively? Absolutely, see the Technotes
[SVC Node Replacement page.
Can I really order an SVC EE in Flamingo Pink? Yes. While my blog post that started all
this [Pink It and Shrink It] was initially just some Photoshop humor, the IBM product manager for SVC accepted this color choice as an RPQ option.
The default color remains Raven Black.
Miles per Gallon measures an effeciency ratio (amount of work done with a fixed amount of energy), not a speed ratio (distance traveled in a unit of time).
Given that IOPs and MB/s are the unit of "work" a storage array does, wouldn't the MPG equivalent for storage be more like IOPs per Watt or MB/s per Watt? Or maybe just simply Megabytes Stored per Watt (a typical "green" measurement)?
You appear to be intentionally avoiding the comparison of I/Os per Second and Megabytes per Second to Miles Per Hour?
May I ask why?
This is a fair question, Barry, so I will try to address it here.
It was not a typo, I did mean MPG (miles per gallon) and not MPH (miles per hour). It is always challenging to find an analogy that everyone can relate to explain concepts in Information Technology that might be harder to grasp. I chose MPG because it was closely related to IOPS and MB/s in four ways:
MPG applies to all instances of a particular make and model. Before Henry Ford and the assembly line, cars were made one at a time, by a small team of craftsmen, and so there could be variety from one instance to another. Today, vehicles and storage systems are mass-produced in a manner that provides consistent quality. You can test one vehicle, and safely assume that all similar instances of the same make and model will have the similar mileage. The same is true for disk systems, test one disk system and you can assume that all others of the same make and model will have similar performance.
MPG has a standardized measurement benchmark that is publicly available. The US Environmental Protection Agency (EPA) is an easy analogy for the Storage Performance Council, providing the results of various offerings to chose from.
MPG has usage-specific benchmarks to reflect real-world conditions.The EPA offers City MPG for the type of driving you do to get to work, and Highway MPG, to reflect the type ofdriving on a cross-country trip. These serve as a direct analogy to SPC having SPC-1 for Online transaction processing (OLTP) and SPC-2 for large file transfers, database queries and video streaming.
MPG can be used for cost/benefit analysis.For example, one could estimate the amount of business value (miles travelled) for the amount of dollar investment (cost to purchase gallons of gasoline, at an assumed gas price). The EPA does this as part of their analysis. This is similar to the way IOPS and MB/s can be divided by the cost of the storage system being tested on SPC benchmark results. The business value of IOPS or MB/s depends on the application, but could relate to the number of transactions processed per hour, the number of music downloads per hour, or number of customer queries handled per hour, all of which can be assigned a specific dollar amount for analysis.
It seemed that if I was going to explain why standardized benchmarks were relevant, I should find an analogy that has similar features to compare to. I thought about MPH, since it is based on time units like IOPS and MB/s, butdecided against it based on an earlier comment you made, Barry, about NASCAR:
Let's imagine that a Dodge Charger wins the overwhelming majority of NASCAR races. Would that prove that a stock Charger is the best car for driving to work, or for a cross-country trip?
Your comparison, Barry, to car-racing brings up three reasons why I felt MPH is a bad metric to use for an analogy:
Increasing MPH, and driving anywhere near the maximum rated MPH for a vehicle, can be reckless and dangerous,risking loss of human life and property damage. Even professional race car drivers will agree there are dangers involved. By contrast, processing I/O requests at maximum speed poses no additional risk to the data, nor possibledamage to any of the IT equipment involved.
While most vehicles have top speeds in excess of 100 miles per hour, most Federal, State and Local speed limits prevent anyone from taking advantage of those maximums. Race-car drivers in NASCAR may be able to take advantage of maximum MPH of a vehicle, the rest of us can't. The government limits speed of vehicles precisely because of the dangers mentioned in the previous bullet. In contrast, processing I/O requests at faster speeds poses no such dangers, so the government poses no limits.
Neither IOPS nor MB/s match MPH exactly.Earlier this week,I related IOPS to "Questions handled per hour" at the local public library, and MB/s to "Spoken words per minute" in those replies. If I tried to find a metric based on unit type to match the "per second" in IOPS and MB/s, then I would need to find a unit that equated to "I/O requests" or "MB transferred" rather than something related to "distance travelled".
In terms of time-based units, the closest I could come up with for IOPS was acceleration rate of zero-to-sixty MPH in a certain number of seconds. Speeding up to 60MPH, then slamming the breaks, and then back up to 60MPH, start-stop, start-stop, and so on, would reflect what IOPS is doing on a requestby request basis, but nobody drives like this (except maybe the taxi cab drivers here in Malaysia!)
Since vehicles are limited to speed limits in normal road conditions, the closest I could come up with for MB/s would be "passenger-miles per hour", such that high-occupancy vehicles like school buses could deliver more passengers than low-occupancy vehicles with only a few passengers.
Neither start-stops nor passenger-miles per hour have standardized benchmarks, so they don't work well for comparisonbetween vehicles.If you or anyone can come up with a metric that will help explain the relevance of standardized benchmarks better than the MPG that I already used, I would be interested in it.
You also mention, Barry, the term "efficiency" but mileage is about "fuel economy".Wikipedia is quick to point out that the fuel efficiency of petroleum engines has improved markedly in recent decades, this does not necessarily translate into fuel economy of cars. The same can be said about the performance of internal bandwidth ofthe backplane between controllers and faster HDD does not necessarily translate to external performance of the disk system as a whole. You correctly point this out in your blog about the DMX-4:
Complementing the 4Gb FC and FICON front-end support added to the DMX-3 at the end of 2006, the new 4Gb back-end allows the DMX-4 to support the latest in 4Gb FC disk drives.
You may have noticed that there weren't any specific performance claims attributed to the new 4Gb FC back-end. This wasn't an oversight, it is in fact intentional. The reality is that when it comes to massive-cache storage architectures, there really isn't that much of a difference between 2Gb/s transfer speeds and 4Gb/s.
Oh, and yes, it's true - the DMX-4 is not the first high-end storage array to ship a 4Gb/s FC back-end. The USP-V, announced way back in May, has that honor (but only if it meets the promised first shipments in July 2007). DMX-4 will be in August '07, so I guess that leaves the DS8000 a distant 3rd.
This also explains why the IBM DS8000, with its clever "Adaptive Replacement Cache" algorithm, has such highSPC-1 benchmarks despite the fact that it still uses 2Gbps drives inside. Given that it doesn't matter between2Gbps and 4Gbps on the back-end, why would it matter which vendor came first, second or third, and why call it a "distant 3rd" for IBM? How soon would IBM need to announce similar back-end support for it to be a "close 3rd" in your mind?
I'll wrap up with you're excellent comment that Watts per GB is a typical "green" metric. I strongly support the whole"green initiative" and I used "Watts per GB" last month to explain about how tape is less energy-consumptive than paper.I see on your blog you have used it yourself here:
The DMX-3 requires less Watts/GB in an apples-to-apples comparison of capacity and ports against both the USP and the DS8000, using the same exact disk drives
It is not clear if "requires less" means "slightly less" or "substantially less" in this context, and have no facts from my own folks within IBM to confirm or deny it. Given that tape is orders of magnitude less energy-consumptive than anything EMC manufacturers today, the point is probably moot.
I find it refreshing, nonetheless, to have agreed-upon "energy consumption" metrics to make such apples-to-apples comparisons between products from different storage vendors. This is exactly what customers want to do with performance as well, without necessarily having to run their own benchmarks or work with specific storage vendors. Of course, Watts/GB consumption varies by workload, so to make such comparisons truly apples-to-apples, you would need to run the same workload against both systems. Why not use the SPC-1 or SPC-2 benchmarks to measure the Watts/GB consumption? That way, EMC can publish the DMX performance numbers at the same time as the energy consumption numbers, and then HDS can follow suit for its USP-V.
I'm on my way back to the USA soon, but wanted to post this now so I can relax on the plane.
Well it's Tuesday again, and you know what that means.. IBM announcements! Today, IBM announces that next Monday marks the 60th anniversary of first commercial digital tape storage system! I am on the East coast this week visiting clients, but plan to be back in Tucson in time for the cake and fireworks next Monday.
1925 - masking tape (which 3M sold under its newly announced Scotch® brand)
1930 - clear cellulose-based tape (today, when people say Scotch tape, they usually are referring to the cellulose version)
1935 - Allgemeine Elektrizitatsgesellschaft (AEG) presents Magnetophon K1, audio recording on analog tape
1942 - Duct tape
1947 - Bing Crosby adopts audio recording for his radio program. This eliminated him doing the same program live twice per day, perhaps the first example of using technology for "deduplication".
According to the IBM Archives the [IBM 726 tape drive was formally announced May 21, 1952]. It was the size of a refrigerator, and the tape reel was the size of a large pizza. The next time you pull a frozen pizza from your fridge, you can remember this month's celebration!
When I first joined IBM in 1986, there were three kinds of IBM tape. The round reel called 3420, and the square cartridge called 3480, and the tubes that contained a wide swath of tape stored in honeycomb shelves called the [IBM 3850 Mass Storage System].
My first job at IBM was to work on DFHSM, which was specifically started in 1977 to manage the IBM 3850, and later renamed to the DFSMShsm component of the DFSMS element of the z/OS operating system. This software was instrumental in keeping disk and tape at high 80-95 percent utilization rates on mainframe servers.
While visiting a client in Detroit, the client loved their StorageTek tape automation silo, but didn't care for the StorageTek drives inside were incompatible with IBM formats. They wanted to put IBM drives into the StorageTek silos. I agreed it was a good idea, and brought this back to the attention of development. In a contentious meeting with management and engineers, I presented this feedback from the client.
Everyone in the room said IBM couldn't do that. I asked "Why not?" The software engineers I spoke to already said they could support it. With StorageTek at the brink of Chapter 11 bankruptcy, I argued that IBM drives in their tape automation would ease the transition of our mainframe customers to an all-IBM environment.
Was the reason related to business/legal concerns, or was their a hardware issue? It turned out to be a little of both. On the business side, IBM had to agree to work with StorageTek on service and support to its mutual clients in mixed environments. On the technical side, the drive had to be tilted 12 degrees to line up with the robotic hand. A few years later, the IBM silo-compatible 3592 drive was commercially available.
Rather than put StorageTek completely out of business, it had the opposite effect. Now that IBM drives can be put in StorageTek libraries, everyone wanted one, basically bringing StorageTek back to life. This forced IBM to offer its own tape automation libraries.
In 1993, I filed my first patent. It was for the RECYCLE function in DFHSM to consolidate valid data from partial tapes to fresh new tapes. Before my patent, the RECYCLE function selected tapes alphabetically, by volume serial (VOLSER). My patent evaluated all tapes based on how full they were, and sorted them least-full to most-full, to maximize the return of cartridges.
Different tape cartridges can hold different amounts of data, especially with different formats on the same media type, with or without compression, so calculating the percentage full turned out to be a tricky algorithm that continues to be used in mainframe environments today.
The patent was popular for cross-licensing, and IBM has since filed additional patents for this invention in other countries to further increase its license revenue for intellectual property.
In 1997, IBM launched the IBM 3494 Virtual Tape Server (VTS), the first virtual tape storage device, blending disk and tape to optimal effect. This was based off the IBM 3850 Mass Storage Systems, which was the first virtual disk system, that used 3380 disk and tape to emulate the older 3350 disk systems.
In the VTS, tape volume images would be emulated as files on a disk system, then later moved to physical tape. We would call the disk the "Tape Volume Cache", and use caching algorithms to decide how long to keep data in cache, versus destage to tape. However, there were only a few tape drives, and sometimes when the VTS was busy, there were no tape drives available to destage the older images, and the cache would fill up.
I had already solved this problem in DFHSM, with a function called pre-migration. The idea was to pre-emptively copy data to tape, but leave it also on disk, so that when it needed to be destaged, all we had to do was delete the disk copy and activate the tape copy. We patented using this idea for the VTS, and it is still used in the successor models of IBM Sysem Storage TS7740 virtual tape libraries today.
Today, tape continues to be the least expensive storage medium, about 15 to 25 times less expensive, dollar-per-GB, than disk technologies. A dollar of today's LTO-5 tape can hold 22 days worth of MP3 music at 192 Kbps recording. A full TS1140 tape cartridge can hold 2 million copies of the book "War and Peace".
(If you have not read the book, Woody Allen took a speed reading course and read the entire novel in just 20 minutes. He summed up the novel in three words: "It involves Russia." By comparison, in the same 20 minutes, at 650MB/sec, the TS1140 drive can read this novel over and over 390,000 times.)
If you have your own "war stories" about tape, I would love to hear them, please consider posting a comment below.
Well, it's 2008, which could mark the end to RAID5 and mark the beginnings of a new disk storagearchitecture. IBM starts the year with exciting news, acquiring new disk technology from a smallstart-up called XIV, led by former-EMCer Moshe Yanai. Moshe was ousted publicly in 2001 from hisposition as EMC's VP of engineering, and formed his own company. It didn't take long for EMC bloggersto poke fun at this already. Mark Twomey, in his StorageZilla blog, had mentioned XIV before back in August,[XIV], and again todayin [IBM Buys XIV].
To address the new requirements associated with next generation digital content, IBM chose XIV and its NEXTRA™ architecture for its ability to scale dynamically, heal itself in the event of failure, and self-tune for optimum performance, all while eliminating the significant management burden typically associated with rapid growth environments. The architecture also is designed to automatically optimize resource utilization of all the components within the system, which can allow for easier management and configuration and improved performance and data availability.
"We are pleased to become a significant part of the IBM family, allowing for our unique storage architecture, our engineers and our storage industry experience to be part of IBM's overall storage business," said Moshe Yanai, chairman, XIV. "We believe the level of technological innovation achieved by our development team is unparalleled in the storage industry. Combining our storage architectural advancements with IBM's world-wide research, sales, service, manufacturing, and distribution capabilities will provide us with the ability to have these technologies tackle the emerging Web 2.0 technology needs and reach every corner of the world."
The NEXTRA architecture has been in production for more than two years, with more than four petabytes of capacity being used by customers today.
Current disk arrays were designed for online transaction processing (OLTP) databases. The focus was onusing fastest most expensive 10K and 15K RPM Fibre Channel drives, with clever caching algorithmsfor quick small updates of large relational databases. However, the world is changing, and peoplenow are looking for storage designed for digital media, archives, and other Web 2.0 applications.
One problem that NEXTRA architecture addresses is RAID rebuild. In a standard RAID5 6+P+S configuration of 146GB 10K RPM drives, the loss of one disk drive module (DDM) was recovered by reconstructing the data from parity of the other drives onto the spare drive. The process took46 minutes or longer, depending on how busy the system was doing other things. During this time,if a second drive in the same rank fails, all 876GB of data are lost. Double-drive failures are rare,but unpleasant when they happen, and hopefully you have a backup on tape to recover the data from.Moving to slower, less expensive SATA drives made this situation worse. The drives have highercapacity, but run at slower speeds. When a SATA drive fails in a RAID5 array, it could take severalhours to rebuild, and that is more time exposure for a second drive failure. A rebuild for a 750GBSATA drive would take five hours or more,with 4.5 TB of data at risk during the process if a second drive failure occurs.
The Nextra architecture doesn't use traditional RAID ranks or spare DDMs. Instead, data is carved up into 1MBobjects, and each object is stored on two physically-separate drives. In the event of a DDM loss, allthe data is readable from the second copies that are spread across hundreds of drives. New copies aremade on the empty disk space of the remaining system. This process can be done for a lost 750GB drive in under20 minutes. A double-drive failure would only lose those few objects that were on both drives, so perhaps1 to 2 percent of the total data stored on that logical volume.
Losing 1 to 2 percent of data might be devastating to a large relational database, as this could impactthe entire access to the internal structure. However, this box was designed for unstructuredcontent, like medical images, music, videos, Web pages, and other discrete files. In the event of a double-drivefailure, individual files would be recovered, such as with IBM Tivoli Storage Manager backup software.
IBM will continue to offer high-speed disk arrays like the IBM System Storage DS8000 and DS4800 for OLTP applications, and offer NEXTRA for this new surge in digital content of unstructured data. Recognizing this trend, diskdrive module manufacturers will phase out 10K RPM drives, and focus on 15K RPM for OLTP, and low-speedSATA for everything else.
Update: This blog post was focused on the version of XIV box available as of January 2008 that was built by XIV prior to the IBM acquisition. IBM has since made a major revision, made available August 2008 thataddresses a variety of workloads, including database, OLTP, email, as well as digital content and unstructuredfiles. Contact your IBM or IBM Business Partner for the latest details!
Bottom line, IBM continues to celebrate the new year, while the EMC folks in Hopkington, MA will continue to nurse their hangovers. Now that's a good way to start the new year!
The new [IBM System Storage Tape Controller 3592 Model C07] is an upgrade to the previous C06 controller. Like the C06, the new 3592-C07 can have up to four FICON (4Gbps) ports, four FC ports, and connect up to 16 drives. The difference is that the C07 supports 8Gbps speed FC ports, and can support the [new TS1140 tape drives that were announced on May 9]. A cool feature of the C07 is that it has a built-in library manager function for the mainframe. On the previous models, you had to have a separate library manager server.
Crossroads ReadVerify Appliance (3222-RV1)
IBM has entered an agreement to resell [Crossroads ReadVerify Appliance], or "RV1" for short. The RV1 is a 1U-high server with software that gathers information on the utilization, performance and health for a physical tape environment, such as an IBM TS3500 Tape Library. The RV1 also offers a feature called "ArchiveVerify" which validates long-term retention archive tapes, providing an audit trail on the readability of tape media. This can be useful for tape libraries attached behind IBM Information Archive compliance storage solution, or the IBM Scale-Out Network Attached Storage (SONAS).
As an added bonus, Crossroads has great videos! Here's one, titled [Tape Sticks]
Linear Tape File System (LTFS) Library Edition Version 2.1
While the hardware is all refreshed, the overall "scale-out" architecture is unchanged. Kudos to the XIV development team for designing a system that is based entirely on commodity hardware, allowing new hardware generations to be introduced with minimal changes to the vast number of field-proven software features like thin provisioning, space-efficient read-only and writeable snapshots, synchronous and asynchronous mirroring, and Quality of Service (QoS) performance classes.
The new XIV Gen3 features an Infiniband interconnect, faster 8Gbps FC ports, more iSCSI ports, faster motherboard and processors, SAS-NL 2TB drives, 24GB cache memory per XIV module, all in a single frame IBM rack that supports the IBM Rear Door Heat Exchanger. The results are a 2x to 4x boost in performance for various workloads. Here are some example performance comparisons:
Disclaimer: Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. Your mileage may vary.
In a Statement of Direction, IBM also has designed the Gen3 modules to be "SSD-ready" which means that you can insert up to 500GB of Solid-State drive capacity per XIV module, up to 7.5TB in a fully-configured 15 module frame. This SSD would act as an extension of DRAM cache, similar to how Performance Accelerator Modules (PAM) on IBM N series.
IBM will continue to sell XIV Gen2 systems for the next 12-18 months, as some clients like the smaller 1TB disk drives. The new Gen3 only comes with 2TB drives. There are some clients that love the XIV so much, that they also use it for less stringent Tier 2 workloads. If you don't need the blazing speed of the new Gen3, perhaps the lower cost XIV Gen2 might be a great fit!
As if I haven't said this enough times already, the IBM XIV is a Tier-1, high-end, enterprise-class disk storage system, optimized for use with mission critical workloads on Linux, UNIX and Windows operating systems, and is the ideal cost-effective replacement for EMC Symmetrix VMAX, HDS USP-V and VSP, and HP P9000 series disk systems, . Like the XIV Gen2, the XIV Gen3 can be used with IBM System i using VIOS, and with IBM System z mainframes running Linux, z/VM or z/VSE. If you run z/OS or z/TPF with Count-Key-Data (CKD) volumes and FICON attachment, go with the IBM System Storage DS8000 instead, IBM's other high-end disk system.
Intelligent block-level disk array that virtualizes both internal and external disk storage
8 Gbps FCP and 1GbE iSCSI
IBM Storwize V7000 disk system
Real-time compression appliance for files
10GbE/1GbE CIFS and NFS
Storwize, now an IBM company
IBM Real-time Compression STN-6800 appliance
1GbE CIFS and NFS
IBM Real-time Compression STN-6500 appliance
If you think this is the first time a company like IBM has pulled shenanigans with product names like this, think again. Here are a few posts that might refresh your memory:
In my September 2006 post, [A brand by any other name...] I explain that I started blogging specifically to promote the new "IBM System Storage" product line name, part of the "IBM Systems" brand resulting from merging the "eServer" and "TotalStorage' brands.
In my January 2007 post, [When Names Change], I explain our naming convention for our disk products, including our DS family, SAN Volume Controller and N series.
In my February 2008 post, [Getting Off the Island], I cover how the x/p/i/z designations came about for our various IBM server product lines.
But what about acquisitions? When [IBM acquired Lotus Development Corporation], it kept the "Lotus" brand. New products that fit the "collaboration" function were put under the Lotus brand. I think most people can accept this approach.
But have we ever seen an existing product renamed to an acquired name?
In my post January 2009 post
[Congratulations to Ken on your QCC Milestone], I mentioned that my colleague Ken Hannigan worked on an internal project initially called "Workstation Data Save Facility" (WDSF) which was changed to "Data Facility Distributed Storage Manager" (DFDSM), then renamed to "ADSTAR Distributed Storage Manager" (ADSM), and finally renamed to the name it has today: IBM Tivoli Storage Manager (TSM).
Readers reminded me that [IBM acquired Tivoli Systems, Inc.] in 1996, so TSM could not have been an internally developed product. Ha! Wrong! Let's take a quick history lesson on how this came about:
In the late 1980s, IBM Almaden research had developed a project to backup personal computers and workstations, which they called "Workstation Data Save Facility" or WDSF.
This was turned over to our development team, which immediately discarded the code, and wrote from scratch its replacmeent, called Data Facility Distributed Storage Manager (DFDSM), named similar to the Data Facility products on the mainframe (DFP, DFHSM, DFDSS). As a member of the Data Facility family, DFDSM didn't really fit. The rest processed mainframe data sets, but DFDSM processed Windows and UNIX files. That a version of DFDSM server was available to run on the mainframe was the only connection.
Then, in the early 1990s, there were discussions of possibly splitting IBM into a bunch of smaller "Baby Blues", similar to how [AT&T was split into "Baby Bells"], and how Forbes and Goldman Sachs now want to split Microsoft into [Baby Bills]. IBM considered naming the storage spin-off as ADSTAR, which stood for "Advanced Storage and Retrieval."
Pre-emptively, IBM renamed DFDSM to "ADSTAR Distributed Storage Manager" or ADSM.
Fortunately, in 1993, IBM brought a new sheriff to town, Lou Gerstner, who quickly squashed any plans to split up IBM. He quickly realized that IBM's core strength was building integrated stacks, combining systems, software and services to solve business problems.
In 1996, IBM acquired Tivoli Systems, Inc. to expand its "Systems Management" portfolio, and renamed ADSM over to IBM Tivoli Storage Manager, since "storage management" is an essential part of "systems management". Later, IBM TotalStorage Productivity Center would be renamed to "IBM Tivoli Storage Productivity Center."
I participated in five months of painful meetings to figure out what to name our new internally-developed midrange disk system. Since it ran SAN Volume Controller software, I pushed for keeping the SVC designation somehow. We considered DS naming convention, but the new midrange product would not fit between our existing DS5000 and DS6000 numbering scheme. A marketing agency we hired came up with nonsensical names, in the spirit of product names like Celerra, Centera and CLARiiON, using name generators like [Wordoid]. Luckily, in the nick of time, IBM acquired Storwize for its compression technology, and decided that Storwize as a name was way better fit than any of the names we came up with already.
However, the new IBM Storwize V7000 midrange product had nothing in common with the appliances acquired from Storwize, the company, so to avoid confusion, the latter products were renamed to [IBM Real-time Compression]. Fellow blogger Steven Kenniston, the Storage Alchemist from Storwize fame now part of IBM from the acquisition, gives his perspective on this in his post [Storwize – What is in a Name, Really?]. While I am often critical of the names and terms IBM uses, I have to say this last set of naming decisions makes a lot of sense to me and I support it wholeheartedly.
Well, it's Wednesday, and you know what that means... IBM Announcements!
(Actually most IBM announcements are on Tuesdays, but IBM gave me extra time to recover from my trip to Europe!)
Today, IBM announced [IBM PureSystems], a new family of expert-integrated systems that combine storage, servers, networking, and software, based on IBM's decades of experience in the IT industry. You can register for the [Launch Event] today (April 11) at 2pm EDT, and download the companion "Integrated Expertise" event app for Apple, Android or Blackberry smartphones.
(If you are thinking, "Hey, wait a minute, hasn't this been done before?" you are not alone. Yes, IBM introduced the System/360 back in 1964, and the AS/400 back in 1988, so today's announcement is on scheduled for this 24-year cycle. Based on IBM's past success in this area, others have followed, most recently, Oracle, HP and Cisco.)
Initially, there are two offerings:
IBM PureFlex™ System
IBM PureFlex is like IaaS-in-a-box, allowing you to manage the system as a pool of virtual resources. It can be used for private cloud deployments, hybrid cloud deployments, or by service providers to offer public cloud solutions. IBM drinks its own champagne, and will have no problem integrating these into its [IBM SmartCloud] offerings.
To simplify ordering, the IBM PureFlex comes in three tee-shirt sizes: Express, Standard and Enterprise.
IBM PureFlex is based on a 10U-high, 19-inch wide, standard rack-mountable chassis that holds 14 bays, organized in a 7 by 2 matrix. Unlike BladeCenter where blades are inserted vertically, the IBM PureFlex nodes are horizontal. Some of the nodes take up a single bay (half-wide), but a few are full-wide, take up two bays, the full 19-inch width of the chassis. Compute and storage snap in the front, while power supplies, fans, and networking snap in the back. You can fit up to four chassis in a standard 42U rack.
Unlike competitive offerings, IBM does not limit you to x86 architectures. Both x86 and POWER-based compute nodes can be mixed into a single chassis. Out of the box, the IBM PureFlex supports four operating systems (AIX, IBM i, Linux and Windows), four server hypervisors (Hyper-V, Linux KVM, PowerVM, and VMware), and two storage hypervisors (SAN Volume Controller and Storwize V7000).
There are a variety of storage options for this. IBM will offer SSD and HDD inside the compute nodes themselves, direct-attached storage nodes, and an integrated version of the Storwize V7000 disk system. Of course, every IBM System Storage product is supported as external storage. Since Storwize V7000 and SAN Volume Controller support external virtualization, many non-IBM devices will be supported automatically as well.
Networking is also optimized, with options for 10Gb and 40Gb Ethernet/FCoE, 40Gb and 56Gb Infiniband, 8Gbps and 16Gbps Fibre Channel. Much of the networking traffic can be handled within the chassis, to minimize traffic on external switches and directors.
For management, IBM offers the Flex System Manager, that allows you to manage all the resources from a single pane of glass. The goal is to greatly simplify the IT lifecycle experience of procurement, installation, deployment and maintenance.
IBM PureApplication™ System
IBM PureApplication is like PaaS-in-a-box. Based on the IBM PureFlex infrastructure, the IBM PureApplication adds additional software layers focused on transactional web, business logic, and database workloads. Initially, it will offer two platforms: Linux platform based on x86 processors, Linux KVM and Red Hat Enterprise Linux (RHEL); and a UNIX platform based on POWER7 processors, PowerVM and AIX operating system. It will be offered in four tee-shirt sizes (small, medium, large and extra large).
In addition to having IBM's middleware like DB2 and WebSphere optimized for this platform, over 600 companies will announce this week that they will support and participate in the IBM PureSystems ecosystem as well. Already, there are 150 "Patterns of Expertise" ready to deploy from IBM PureSystem Centre, a kind of a "data center app store", borrowing an idea used today with smartphones.
By packaging applications in this manner, workloads can easily shift between private, hybrid and public clouds.
If you are unhappy with the inflexibility of your VCE Vblock, HP Integrity, or Oracle ExaLogic, talk to your local IBM Business Partner or Sales Representative. We might be able to buy your boat anchor off your hands, as part of an IBM PureSystems sale, with an attractive IBM Global Financing plan.
Continuing my saga for my [New Laptop], I have gotten all my programs operational, transferred and organized all my data, and now ready for testing. You can read my previous posts on this series: [Day 1], [Day 2], [Day 3], [Day 4].
At this point, you might be thinking, "Testing? Just use your laptop already, deal with problems as you find them!" In my case, I need to sign off that the new laptop meets my needs, and then send back my previous laptop, wiped clean of all passwords and data. I have until the end of June to do this.
The value of testing is to avoid problems later, perhaps an inconvenient time such as a business trip or client briefing. It is better to work out any issues while I am still in the office, connected to the internal IBM intranet on a high-speed wired connection. Also, I plan to do a Physical-to-Virtual (P-to-V) conversion of my Windows XP C: drive to run as a virtual guest OS on Linux, so I want to make sure the image is in working order before the conversion. That said, here is what my testing encountered.
Of the 134 applications I had identified as being installed on my old laptop, I determined that I only needed about 70 of them. The others I did not bother to install on the new.
I had not thought about "addons" and "plugins" that I have that attach themselves inside browsers or other applications. I made sure that Flash, Shockwave and Java worked correctly on all three browsers: IE6, Firefox and Opera.
One of my "plugins" is an application called [iSpring Pro, which plugs into Microsoft PowerPoint. I thought I had Microsoft Office installed, but found out the standard IBM build had only the viewers. I installed Microsoft Office 2003 Standard Edition with PowerPoint, Excel and Word. I then realized that I did not have the original V4.3 installation file for iSpring Pro, so I downloaded the latest v5 from their website. However, my license key is only for version 4, so a quick email got this resolved, and the nice folks at iSpring Solutions sent me the v4.3 installation file.
Shameless Plug: We use iSpring Pro to record our voices with PowerPoint slides to generate web videos for the [IBM Virtual Briefing Center] which we use to complement face-to-face briefings. This allows attendees to review introductory materials to prepare for their visit to Tucson, or to stay up-to-date on products and features in between annual visits. If you have not checked out the IBM Virtual Briefing Center, now is a good time to see what videos and other resources we have out there. You can even request to schedule a briefing in Tucson!
Testing out iSpring Pro, I realized that there are no jacks for my headset. On my old ThinkPad T60, I had two jacks, one green for headphone and one pink for microphone. My headset has two cables, one for each, which I then use for the recordings. I also use this for online webinars and training sessions. Apparently, ThinkPad T410 went for a single 3.5mm "Combo" audio jack that handles both roles. Fortunately, there is a [Headset Buddy] adapter that merges the two cables from my headset to the combo jack on my new laptop. I ordered one which will arrive some time next week.
My new laptop doesn't fit my old docking station either. I had set the docking station aside while I had the two laptops latched together for the file transfers, but now that I am done with the old laptop, I discovered that my new T410 doesn't fit. I ordered a new one.
Using find, grep, awk, sort and uniq, I was able to generate a list of all the file extensions on my Documents foler. I was able to find old Lotus 123, Freelance Graphics, and Wordpro files. I thought Lotus Symphony would handle these, but it does not. I was able to install an old version of Lotus Smartsuite that includes these programs so that I can process these files.
I also found in the extensions list pptx, docx and xlsx files, which represent the new Microsoft Office 2007 formats. I installed the "Format Compatability Pack" that allows Office 2003 read these files.
Lastly, I installed a few programs that support a wide variety of file formats. VideoLAN's [VLC] plays a variety of audio and video files. [7-Zip] packs and unpacks a variety of archive files. (Note: Another program, BitZipper, also supports a variety of archive formats, but the install will corrupt your Firefox and IE browsers with new tool bars, change your search engine default, and install a lot of other unwanted software. Cleaning up the mess can be time-consuming. You have been warned!) I also installed [MadEdit], a binary/hex/text editor that will open any file to see what kind of format it has inside. From this, I was able to determine that some of my extension-less files were GIF, RTF or PDF format, and rename them accordingly.
With the testing done, I am ready to go wipe my old system of all passwords and data!