I'm sure this information is in hundreds or thousands of other places, but as I had written it up for an internal team Wiki, I thought I'd repost here as well.
Perl is included by default in AIX, but most of the Modules are not, so the rest of this article deals with installing those.
Some Perl scripts make use of additional Modules, and there are Modules with many different capabilities, so be sure to look for existing Modules if you need to do anything that someone else might have had to do already.
Obtaining a Module
For instance, a script we created uses the Date::Simple module. After finding its page, you click the Download link on the right side to obtain what is actually a source package in .tar.gz format.
Module Installation from Source
These instructions are summarized from somewhere, I thought an earlier version of the generic installation instructions on the CPAN site. However, that site now describes a simpler approach using a cpanminus installation module. I'll have to try that out.
Decompress the file
This can be done as any user.
gunzip -c Date
Build the module
These steps can also be performed as any user.
By default, the Makefile will attempt to create an "XS" version of the Module, which means a version that uses native C code to improve performance. This means the "make" command will require access to a local C compiler.
If you don't have a C compiler or want to create a "pure-Perl" Module to copy around to various systems, you use the "noxs" option. The output of "perl Makefile.PL" will actually tell you to use this option if you see errors during the "make" step. If that occurs, the error will look something like:
cc_r -c -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=-1 -qnoansialias
Install the module
This step needs to be performed as a user that can write to the Perl installation direction. Most likely "root".
Also watch for file permissions. By default this could make the module directory, subdirectories, and files be only readable by root.
This post is intended to document procedures which can be used to simplify and increase security of remote login procedures to UNIX systems through use of SSH private and public keys.
PuTTY for Windows
Creating an SSH private key
PuTTYgen is used for this step. Use the "Generate" button and follow the instructions.
You can choose RSA or DSA key types, and you can change the key size.
Enter a passphrase and "Save private key" somewhere on your local system. Note: Use a passphrase that you can remember but that is stronger than a normal password. Security people usually suggest using whole sentences or combinations of words/phrases. Later we'll configure another program so that you don't have to type this passphrase very often.
Installing the public key on the remote system
There are various ways to do this, but the PuTTYgen window explains what I've found to be the easiest. That is, copy the text from the Key text area at the top of the window and manually add it to the $HOM
The authorized_keys file probably doesn't yet exist, and the .ssh directory may or may not. (The same directory is where ssh places the known_hosts file that contains the public keys for hosts which you have trusted for ssh connections in the past.)
If either doesn't exist and has to be created, ensure that the permissions are as follows
Each line in authorized_keys can also be configured with further options, including restricting a key's use to specific hosts, for instance. The best documentation I found on those options is at this Free BSD man page.
You can, and probably will want to, install the exact same public key on each system on which you want to use key-based authentication.
Using the key pair to login with puTTY
This is the "manual" approach, which isn't necessary if you follow the next step, but I wanted to document it for completeness. Here we explicitly tell a PuTTY session that we'll be authenticating with the private key file we saved earlier.
If you use this approach, when you connect to the remote system, you'll be prompted to enter your private key's passphrase:
You could argue that's actually worse usability than the user ID/password solution since you'll be typing a much longer passphrase, which is where the next step comes in handy.
Automatic key usage with Pageant
Another of the PuTTY programs, Pageant, can act as an agent providing access to private keys and only requiring you to authenticate once for each key.
Once you've added this key file to Pageant and entered your passphrase there, you can leave Pageant running, and all the PuTTY programs will be able to authenticate with your key without your further involvement. In fact, with Pageant running, any attempts to connect to a host which trusts your key will automatically connect even if you haven't explicitly configured your PuTTY session to use key authentication. (See the default, enabled "Attempt authentication using Pageant" checkbox in the above PuTTY screenshot.)
Furthermore, the Pageant tray icon can actually be used to directly launch any saved PuTTY sessions you've created. Right-click on the tray icon and select "Saved Sessions".
Finally, you can use the command-line to pass to Pageant any private keys you want it to automatically load when it starts. This allows you to create a shortcut icon that will prompt you for the necessary passphrases and then start a copy of Pageant ready to be used for subsequent, key-authenticated SSH sessions:
DougBreaux 270007SMYJ Visits (4410)
gunzip -c file.gz | tar xvf -
Edit: As a colleague pointed out, some flavors of UNIX have the -z flag in tar. This is for those which don't (like AIX).
DougBreaux 270007SMYJ Visits (17962)
Each user on the system will have its own keystore where its public and private keys are stored. This keystore can be protected by a separate password or can be synchronized such that it's protected by the normal login password. I believe this is a system-wide setting, and the default is to synchronize the passwords. User keystores are located in /var
If a user is explicitly granted access to act as a specific group in relation to EFS (in addition to being assigned to that group at the OS level), the group's private and public keys will also be copied into the user's keystore.
Groups also have their own keystores, located in /var
Each file is encrypted with a unique, symmetric (AES) key. For each user or group that is authorized to view the encrypted file, the symmetric key is then itself encrypted with the user/group's public key from its keystore, and that user-specific encrypted version of the key is stored in the file's extended attributes (EAs). That is, there will be one EA for each user and group that has access to the file in question. (See section 2.4 of the AIX V6 Advanced Security Redbook.)
Requirements & Constraints
Tips & Specific Commands
Note: based on this article which I've only recently seen and haven't yet fully parsed, those last two items may no longer be true starting with AIX 6.1 TL4.