IBM TRIRIGA - PLANNING YOUR INSTALL OR MIGRATION

Body

Planning for a new install or migration of an existing IBM Tririga install can be a complicated endeavor because there are so many different possible configurations for the IBM Tririga n-Tier architecture.  Below are some links that will help you with your planning.

For a minimum recommendation in terms of physical hardware please review the following:

https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/IBM%20TRIRIGA1/page/Hardware%20Requirements

Review the applicable Compatibility Matrix for your Tririga Application Platform version to make sure your target environment will be compatible.  NOTE: Click the Attachments Tab to see all Matrices:

https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/IBM%20TRIRIGA1/page/Archive%20of%20IBM%20TRIRIGA%20Support%20Matrices

Review the Overview of hardware configuration for your version (here is the link to one for IBM Tririga Platform 3.5.0 as an example):

https://www.ibm.com/support/knowledgecenter/SSHEB3_3.5.0/com.ibm.tap.doc/ins_overview/t_ctr_install_ibm_tap.html

Review the Performance Best Practices Document and implement any recommendations that apply to your target environment:

https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/IBM%20TRIRIGA1/page/Best%20Practices%20for%20System%20Performance

Review the System Sizing information available here and take action accordingly:

https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/IBM%20TRIRIGA1/page/System%20Sizing

This is a lot of information to go through, but taking the time to review this information during your planning phase of your install or migration will allow you to make informed decisions based on your intended use of the IBM Tririga product and plan accordingly.