Kia ora everyone.
Here you have my newest IBM publication, it is called:
Using the IBM Spectrum Accelerate Family in VMware Environments: IBM XIV, IBM FlashSystem A9000 and IBM FlashSystem A9000R, and IBM Spectrum Accelerate
Spectrum Control Base is becoming our main weapon against Nutanix, Nexenta and others SDS vendors.
It allows system administrators to have a single point of view of Computing and Storage.
This "Receipt book" is a project from Bertrand Dufrasne, from ITSO and my participation was sponsored by my manager and mentor Eric Wong, whom I thank for supporting this initiative.
So, want to know more? Give me a call or download the redpaper!
It is available at:
I invite you to talk to your Business Partner about Spectrum Control Base, it is NO COST for IBM storage customers, so no excuse on trying it! :P
PS: Don't forget to review it please! ;)
Cloud Storage Solutions
Kia ora everyone.
We have just released the IBM Storage Driver for OpenStack v1.2.0 and would like to share some of the more important features in this release.
The IBM Storage Driver for OpenStack is a software component that integrates with the OpenStack cloud environment and enables utilization of storage resources provided by the IBM XIV Storage System.
So what's new in our latest release?
Support for the OpenStack Grizzly release, which adds support for multiple storage backends on a single Cinder node. During the installation of the IBM Storage Driver for OpenStack v.1.2.0 on the Cinder node, the installation wizard will enable the configuration of multiple XIV storage backends, may it be two or more separate XIV systems or storage pools on the same XIV system.
Our Storage Driver now supports Fibre Channel (FC) storage connectivity to the compute node, in addition to the already supported iSCSI protocol.
To ease the installation and setup process of the new IBM Storage driver, we have enhanced the unattended installation of the IBM Storage Driver for Open Stack with the option to use a pre-configured ini file which includes the parameters of all the storage backends to be configured during the installation process.
In addition we introduced several fixes and code stability improvements.
The software and the related documentation can be downloaded from IBM Fix Central
The IBM HSG Team
In this post we would like to introduce the latest version of the IBM Storage Driver for OpenStack, which we released on January 31st, 2013.
If by any chance you are unfamiliar with OpenStack, check out the official OpenStack project website at: www.openstack.org
To put in a few words, OpenStack is an open-source software platform for building private and public cloud environments. The IBM driver is a software component that enables storage provisioning of the IBM XIV Storage Systems in OpenStack cloud environments.
The latest IBM driver version was preceded by an earlier one (1.1.0), which enabled basic storage provisioning operations, such as volume creation and deletion from OpenStack Cinder Node, and volume attachment to OpenStack VMs.
The new release (1.1.1) further enhances the integration between OpenStack and IBM XIV Storage System by adding support for XIV volume snapshot functions.
For example, let's look at the following OpenStack Web UI management page:
In this example, if you want to create a snapshot of ‘vol1’ on IBM XIV Storage System, you can use the ‘Create Snapshot’ action using either OpenStack CLI or Web UI.
Here is your created snapshot, as can be viewed from the XIV GUI:
Similarly, you can use OpenStack's ‘Create volume from snapshot’ action to create a volume based on an existing snapshot.
An additional ease-of-use enhancement in version 1.1.1 is the new unattended installation option, allowing no user interaction during the installation, perfect for automating the installation process. You can use the following command format to install the IBM driver in an unattended mode:
Cinder-node# ./install.sh –s –a <xiv_address> –u <username> –p <password> –o <pool_name>
The IBM Storage Driver for OpenStack can be downloaded here along with the Installation Guide and Release Notes.
Whenever you choose to integrate your IBM XIV Storage System with an OpenStack cloud environment, our driver is available to help you achieve this goal. We are happy to provide this newer version that further facilitates and enhances the utilization of your XIV storage resources and capabilities in your cloud environment.
As always, you are welcome to share your thoughts with us.
- The IBM Storage Host Software Development Group
Once again, we are proud to announce the release of the latest IBM XIV Host Attachment Kit 1.10.0.
The main feature of this release is Windows Server 2012 support. From this version onward, HAK is fully compatible with your new & shiny installation of Windows Server 2012. Go ahead and take it for a spin!
As part of our ongoing efforts to improve ease of use, we have translated the Windows Installer of HAK to Japanese as well, for the benefit of our Japanese speaking users. More languages to follow.
In addition to the above, we have also resolved several bugs and known issues from previous versions, including among others:
Of course that's not all - You may read more about these improvements as well as the rest of the enhancements and fixes in the Release Notes.
We hope you will enjoy this new release of the Host Attachment Kit, at least as much as we enjoyed developing it!
Follow this link to download the installable or portable packages and access the release documentation.
If you have comments, questions or requests, please write to us in the comments section below. We'd love to hear from you.
The IBM Host Software Team
We are happy to announce our newest edition of the IBM XIV Host Attachment Kit, version 1.8.0. This release includes a new utility and support for new operating system versions, as well as several bug fixes and code infrastructure improvements.
And now, let's dive into the details:
Starting with our cool new utility, called "xiv_syslist"... This new tool in the HAK will provide great assitance to host and storage administrators, by exposing useful storage array details from the server/host point of view. What kind of details? Without turning this post into a User Guide, the list of storage array details includes (for each array connected to the host): Array name, Array Serial, Management IPs, Connected Modules & Ports, Connectivity Types, Host Name Defined and Host Ports Definition State. The output can be formatted as xml or csv, as well as regular text output.The "xiv_syslist" utility is available on all platforms supported by the HAK.
In addition we have broadened our list of supported OS versions and now it also includes: SLES 11 SP2, RHEL 5.8, Solaris 10 u10, AIX 7.1 TL1 and AIX 6.1 TL7.
We would love to hear from you, please leave your questions and comments below.
The IBM XIV Host Software team
DmitriyIsayev 310000T63H Tags:  flash hyperswap sra high availability xiv vmware openstack 1 Comment 5,924 Views
Let’s face it: even the most resilient, robust, and secure storage sites, located above ground or even underground, could potentially be exposed, in a certain degree, to all kinds of disasters that may temporarily or indefinitely halt the site operation. This could be an extreme weather condition or natural disaster (hurricane, tornado, earthquake, etc.), a prolonged and unplanned interruption of power supply (power grid or power station failure), an accident, act of war, cyberattack, and who knows what else – God forbid…
Enterprises that rely on non-stop, continuous, and unbreakable access to data, as well as on the ability to keep existing data integrity in parallel to on-going update/writing operations at the highest possible standards, must have disaster prevention and recovery mechanisms in place, ready to be used at any point in time.
Enterprise-class storage systems, such as IBM XIV Gen3, IBM FlashSystem A9000, and IBM FlashSystem A9000R, provide advanced site mirroring capabilities, either synchronous or asynchronous, including 3-site mirroring for XIV Gen3, and HyperSwap for FlashSystem A9000 and A9000R. These native underlying replication and high availability (HA) technologies allow these IBM storage systems to serve not only conventional hosts and clusters, but also virtual machines in VMware and Microsoft cloud environments, as well as OpenStack cloud nodes.
Virtual machines duplicates can be deployed at a secondary backup site, together with the backup storage systems to serve those sites.
For detailed information about employing HyperSwap for VMware and Microsoft environments, refer to the IBM Redpaper: ‘IBM HyperSwap for IBM FlashSystem A9000 and A9000R’. Additional data protection scenarios are described in this IBM Redpaper: ‘IBM FlashSystem A9000 and A9000R Business Continuity Solutions’.
This somewhat belated blog post is meant to clarify the past, present, and future development of the IBM Storage Driver for OpenStack. For over 4 years, ever since the OpenStack Folsom release (when Cinder was still part of Nova), IBM Storage Driver for OpenStack has been released by IBM to support the integration of IBM XIV and IBM DS8000 storage systems with OpenStack cloud environments. In parallel, the IBM SAN Volume Controller, IBM Storwize Family, and IBM FlashSystem V9000 storage systems were already included in the OpenStack community source code. Throughout this period, the IBM XIV and IBM DS8000 storage driver remained proprietary. However, as community standards called for opening the driver source code, a decision to incorporate the driver into the community code has been made.
We decided to take the dive into the open-source code in version 2.0.0 of IBM Storage Driver for OpenStack, aiming to include IBM FlashSystem A9000 and A9000R, IBM XIV, IBM Spectrum Accelerate (deployable software), and IBM DS8000 Family systems in the community source code for the OpenStack Ocata release.
The journey of opening the code has been a unique one, as most drivers start as open, and do not evolve from a closed source code. But the challenge was met, and, as we are actually nearing the next release of version 2.1.0, we can make a full use of countless benefits of any open source software. Among them are:
Stay tuned for our next blog post when the community-based version 2.1.0 is released.
If you are looking for the driver’s up-to-date compatibility matrix, you can find it here.
The IBM Flash Centers of Competency has posted a very good blog about our latest SCB version
You can read the blog here
Calline Sanchez, Vice President, IBM Enterprise Systems Storage, published this blog entry on using IBM DS8880F family of all-flash storage systems and IBM Spectrum Connect for running of stateful containerized applications.
Meet IBM Spectrum Connect, fast and easy solution for integrating various IBM storage systems in multiple cloud environments.
Listen to Harald Seipp, IBM Certified Consulting IT Specialist, explaining how to use IBM Spectrum Connect for provisioning, monitoring, automating and orchestrating of IBM block storage in containerized, VMware and Microsoft PowerShell ecosystems in this YouTube video.
Are you in need of a flexible container solution for your Power-based datacenter? Do you plan for big data crunch or robust hybrid cloud deployment, using Spectrum Accelerate or Spectrum Virtualize systems as your storage? Here at the IBM Systems labs, we've been working to match IBM Storage Enabler for Containers to your requirements.
Download IBM Spectrum Connect (3.4.0) and the Installer for IBM Storage Enabler for Containers (1.1.1) from IBM Fix Central. You can also go to GitHuB to see the IBM's open-source project that IBM Storage Enabler for Containers is based on. As always, check out the IBM Spectrum Connect (3.4.0) release notes on IBM Knowledge Center.
Go! Go! Power Systems!
DmitriyIsayev 310000T63H Tags:  vro vmware spectrum_connect vrops powershell kubernetes 1,849 Views
Before anything else, let’s start with a few questions:
If you’ve answered “Yes” to any of the above questions, IBM Spectrum Connect is available and ready to serve you. Formerly named IBM Spectrum Control Base Edition, IBM Spectrum Connect encompasses everything that you might need for integrating your multi-cloud environments with supported IBM storage systems, from an all-in-one, easy-to-use server platform.
Simply put, IBM Spectrum Connect is a centralized cloud integration system that consolidates a range of IBM storage provisioning, automation, and monitoring solutions through a unified server platform. It provides a single server, small-footprint backend location and enables centralized management of IBM storage resources for different virtualization, cloud and container platforms.
By implementing advanced storage provisioning techniques, IBM Spectrum Connect allows storage and hybrid cloud administrators to supply and integrate IBM storage with a range of VMware solutions, Kubernetes container clusters, and Microsoft PowerShell automation methods. IBM Spectrum Connect provides a web-based UI that makes this entire administration easy and straightforward, and saves a significant amount of time in setting up, connecting, and integrating the required storage resources into your cloud environment.
To enable this wide range of functional integration possibilities, the IBM Spectrum Connect suite includes the following individual cloud interfaces:
Cedric Cook, our Product Offering manager, covers all this in further detail in the following developerWorks blog:
The first version of IBM Spectrum Connect is 3.4.0, continuing from the previous version line of IBM Spectrum Control Base Edition. Under the new brand name, it is still available at no extra cost for IBM Storage customers. Check out the formal IBM Spectrum Connect brand page at: ibm.com/us-en/marketplace/spectrum-connect.
For the first time, you can download Spectrum Connect directly from the brand page by clicking Download Now.
And last but not least, we also have a new IBM Knowledge Center space where you can find the complete documentation for IBM Spectrum Connect: ibm.com/support/knowledgecenter/SS6JWS.
As always, we’d be happy to receive any feedback, questions, or suggestions that you may have.
Thanks for tuning in!
The IBM Spectrum Connect team
IBM maintains a longstanding partnership with VMware, and the IBM Cloud Storage Solutions team is a key design partner for VMware Virtual Volumes (VVOLs).
Hear from Carlos Fuente, an IBM Distinguished Engineer, about the capabilities and benefits of VVOLs together with IBM Storage offerings in this YouTube video.
Get your hosts ready, as the new HAK is in now available! The latest 2.9.0 release improves connection stability when attaching hosts to storage systems in IBM HyperSwap and Hyper-Scale Mobility deployments.
As in the last few releases, HAK is available for Windows, Linux, or AIX hosts. A quick reminder for HAK newbies: it allows your hosts to easily connect to volumes on IBM Spectrum Accelerate Family storage systems (FlashSystem A9000 and A9000R, XIV, Spectrum Accelerate deployable SW) over iSCSI or Fibre Channel.
Version 2.9.0 also supports the 1Q18 milestone software release of FlashSystem A9000 and A9000R, version 12.2.1, as well as the RedHat Linux 6.9 and 7.4 releases.
You can download HAK 2.9.0 from IBM Fix Central. Check out the HAK version 2.9.0 documentation on IBM Knowledge Center, which includes the HAK lifecycle and compatibility matrix, latest release notes, and user guide, which now - by the way - has additional info and references regarding host multipathing with FlashSystem A9000 and A9000R. Also, if Microsoft Windows Server is the OS of your hosts, check the new list of required hotfixes (KBs) page (previously listed in the release notes) for error-free operation of your hosts.
As always, your feedback is always welcome.
The IBM Cloud Storage Solutions team
IBM Spectrum Control Base Edition, version 3.3.0 has landed and with it a new major step forward in IBM cloud integration capabilities. Now, you can use IBM storage systems as persistent storage for containerized applications in Kubernetes clusters. This version brings a new cloud interface, IBM Storage Enabler for Containers (1.0.0), a nifty plug-in that makes a smart use of Spectrum Control Base storage profiles. These profiles are used for automating persistent volume provisioning in Kubernetes environment. Pure magic, right?!
Download IBM Spectrum Control Base Edition (3.3.0) and the Installer for IBM Storage Enabler for Containers (1.0.0) from IBM Fix Central. You can also go to GitHuB to see the IBM's open-source project that IBM Storage Enabler for Containers is based on. As usual, do not forget to check out the IBM Spectrum Control Base Edition (3.3.0) release notes on IBM Knowledge Center.
More information about this exciting offering is available in these blog posts: