- IBM XIV Host Attachment Kit
- IBM Storage Management Console for VMware vCenter
- IBM Storage Adapter for VMware vCenter Site Recovery Manager
- IBM Storage Enabler for Windows Failover Clustering
Cloud Storage Solutions (Host Software Group)
orenhe 270001V1S7 1.478 Visualizações
In this blog we'll try to provide you with the latest news from our XIV Host Software team.
We'll focus on the following products, which we develop for XIV Storage System customers:
More info to follow!
orenhe 270001V1S7 Marcações:  hak xiv hostattachment 1.7.1 host_attachment_kit 3.443 Visualizações
The XIV Host Software team is happy to announce the 2011Q4 release of the XIV Host Attachment Kit, version 1.7.1.
Note that this is mostly a maintenance release with a couple of improvements. Upgrade is recommended but not mandatory. Go ahead and take HAK for a spin and tell us what you think in the comments below. In the provided link, you can get HAK 1.7.1 for all supported platforms, Host Attachment Guide, and platform-specific Release Notes.
Release HighlightsWe recommend checking out the full list of changes and known issues for a specific platform in the corresponding Host Attachment Kit 1.7.1 Release Notes, available in the link above.
We've invested a lot in internal test and development improvements. Most notably we've increased the automated test coverage and improved our automated build environment. This allows us to provide you with a better tested, higher quality product.
Got comments? we'd like to hear them!
- The XIV Host Software team
We are excited to announce release of IBM XIV SRA 2.1.0 that is compatible with VMware Site Recovery Manager 5.0.
About SRM 5.0:
Site Recovery Manager 5.0 includes three major additions to the workflow capabilities:
About IBM XIV SRA 2.1.0 with VMware SRM 5.0:
The IBM XIV SRA extends SRM capabilities and allows it to seamlessly employ XIV replication and mirroring as part of the SRM comprehensive Disaster Recovery Planning (DRP) solution.
Using the IBM XIV SRA, VMware administrators can automate the failover of an XIV system at the primary SRM site to an XIV system at a recovery (secondary) SRM site. Immediately upon a failover, the ESX/ESXi servers at the secondary SRM site start using the replicated datastores on the mirrored volumes of the secondary XIV system.
That's great ! But where can I get It ?
It's already available at the VMware download page of SRM 5.0.1 (You can click on the "Show Details" link inside the "Components" section to reveal the list of SRA components with IBM XIV SRA included)
We would love to hear from you, please leave you questions and comments below.
IBM XIV Host Software team
We are happy to announce our newest edition of the IBM XIV Host Attachment Kit, version 1.8.0. This release includes a new utility and support for new operating system versions, as well as several bug fixes and code infrastructure improvements.
And now, let's dive into the details:
Starting with our cool new utility, called "xiv_syslist"... This new tool in the HAK will provide great assitance to host and storage administrators, by exposing useful storage array details from the server/host point of view. What kind of details? Without turning this post into a User Guide, the list of storage array details includes (for each array connected to the host): Array name, Array Serial, Management IPs, Connected Modules & Ports, Connectivity Types, Host Name Defined and Host Ports Definition State. The output can be formatted as xml or csv, as well as regular text output.The "xiv_syslist" utility is available on all platforms supported by the HAK.
In addition we have broadened our list of supported OS versions and now it also includes: SLES 11 SP2, RHEL 5.8, Solaris 10 u10, AIX 7.1 TL1 and AIX 6.1 TL7.
We would love to hear from you, please leave your questions and comments below.
The IBM XIV Host Software team
The new version adds the following enhancements for XIV users:
From now on, for each new volume you create on the storage system, the IBM storage plug-in enforces the chosen MP policy. Alternatively, if you choose Disable Multipath Policy Enforcement, no MP policy is enforced (in such a case, VMware’s default MP policy for the storage array will be in effect).
These enhancements also apply to other IBM storage systems that the plug-in supports. In addition, version 3.0.0 introduces support for IBM Storwize V7000 Unified and IBM Scale Out Network Attached Storage (SONAS) as well as various bug fixes. You can check out the release notes for more details.
After you’ve heard all that, you can now go ahead and download the IBM Storage Management Console for VMware vCenter version 3.0.0 along with its documentation from the IBM Fix Central.
We’d love to hear your thoughts and comments, so please share them with us!
Hi Everyone !
It's HAK release time again !!
As part of our ongoing efforts to keep the IBM XIV Host Attachment Kit up to date and provide enhanced and new functionality, we are proud to announce the latest Host Attachment Kit version 1.9.0.
In this new version we have added support for several new platform versions:
Solaris 11, the recently released Red Hat Enterprise Linux 6.3 and the latest AIX 5.3, AIX 6.1 and AIX 7.1 Service Packs which introduce IBM XIV LUN 0 support.
But we did more than that. We have also enhanced the current HAK functionality by providing our UNIX & Linux users with manual pages accessible by using the 'man' command. Now you can access the documentation for each HAK command by executing 'man <HAK command>'.
In addition, in AIX OS, 'xiv_attach' is now capable of automatic discovery of connected XIV systems and host definition on the connected XIV, by utilizing the latest AIX 5.3, AIX 6.1 and AIX 7.1 SP, in which XIV LUN0 support was added. This aligns the XIV support in AIX OS with that of other supported OS-s. Moreover, LUN0 support also introduces a new HAK utility to AIX HAK users - 'xiv_syslist' , which you can read more about here.
The log collection utility, 'xiv_diag', was enhanced and now can be executed in unattended mode by providing the command with the destination path for the compressed log collection package as a command line argument.
Finally, additional bugs and known issues were resolved, and you can read more about them in the Release Notes.
Follow this link to download the installable or portable packages and access the release documentation.
Let's keep in touch!
The IBM Host Software Team
Hi everyone, we have some great news for VMware SRM 4.1.x users.
The new IBM XIV Adapter for VMware vCenter SRM 4.1.x was released!
The IBM XIV Adapter version 4.1.0 adds support for XIV's GEN3 systems, and also fixes a couple of bugs.
So if you are using SRM 4.1 - you can now use it with both XIV GEN2 (microcode version 10.2.x) and XIV GEN3 (microcode version 11.x)!
You can download the IBM XIV adapter software package from the SRM 4.1.2 download page (after clicking the View Downloads button, the IBM XIV adapter is listed on the page).
Feel free to ask us any question.
Lihi Tikolsky from the IBM XIV Host Software team.
Once again, we are proud to announce the release of the latest IBM XIV Host Attachment Kit 1.10.0.
The main feature of this release is Windows Server 2012 support. From this version onward, HAK is fully compatible with your new & shiny installation of Windows Server 2012. Go ahead and take it for a spin!
As part of our ongoing efforts to improve ease of use, we have translated the Windows Installer of HAK to Japanese as well, for the benefit of our Japanese speaking users. More languages to follow.
In addition to the above, we have also resolved several bugs and known issues from previous versions, including among others:
Of course that's not all - You may read more about these improvements as well as the rest of the enhancements and fixes in the Release Notes.
We hope you will enjoy this new release of the Host Attachment Kit, at least as much as we enjoyed developing it!
Follow this link to download the installable or portable packages and access the release documentation.
If you have comments, questions or requests, please write to us in the comments section below. We'd love to hear from you.
The IBM Host Software Team
ZivKalmanovich 2700044YXC 2.211 Visualizações
We have just made the latest version of IBM Storage Enabler for Windows Fail-over Clustering publicly available on IBM Fix Central.
I would like to highlight some of the new features and improvements introduced in version 1.1.0:
In addition several major issues were resolved, such as those related to deployments where XIV disks resided in the 'Available Storage' cluster group and issues related to XIV Mirror resource behavior upon Cluster Service failure.
The new version of the IBM Storage Enabler for Windows Fail-over Clustering and the related documentation can be found here.
Happy Clustering !
The IBM Host Software Group
We are pleased to let you know about our recently launched IBM Storage Host Software Solutions Information Center!
In this information center, or IC, you can find the relevant documentation of all the solutions that we offer, including information of both past versions and the latest versions.
Whether our host software solution is for XIV, DS8000, Storwize, or any other IBM storage system – the release notes, user guide, or installation guide are available on the IC in either PDF or HTML format (whatever suits you best).
The solutions are categorized on the navigation tree under four main categories: business continuity, management, host connectivity, and virtualization. Keep in mind, however, that some solutions could belong in more than one category. For example, a solution such as IBM Storage Management Console for VMware vCenter is placed under the virtualization category, but it may also be regarded as a powerful management solution. For another example, our XIV and SVC adapters for VMware vCenter Site Recovery Manager, also placed under virtualization, may also be regarded as business continuity solutions.
In any case, we hope that the organization of our solutions on the IC makes sense to you, and that the information is helpful. If not, please let us know! You can use the online feedback form that is available on the IC.
Each solution has its own welcome page from which you can have quick access to the information of the available versions. The PDF publications are available on the Publications page of each solution.
If you'd like to see our list of solutions per independent software vendor (ISV), check out the Solutions by ISV page. Alternatively, to see which solutions are available for a specific IBM storage system, check out the Solutions by storage system page.
And, of course, the IC is regularly being updated and improved. You can always check what's new on the IC by visiting the What's new page.
Lastly, we would like to thank our Information Development team for making it happen.
The HSG Team
In this post we would like to introduce the latest version of the IBM Storage Driver for OpenStack, which we released on January 31st, 2013.
If by any chance you are unfamiliar with OpenStack, check out the official OpenStack project website at: www.openstack.org
To put in a few words, OpenStack is an open-source software platform for building private and public cloud environments. The IBM driver is a software component that enables storage provisioning of the IBM XIV Storage Systems in OpenStack cloud environments.
The latest IBM driver version was preceded by an earlier one (1.1.0), which enabled basic storage provisioning operations, such as volume creation and deletion from OpenStack Cinder Node, and volume attachment to OpenStack VMs.
The new release (1.1.1) further enhances the integration between OpenStack and IBM XIV Storage System by adding support for XIV volume snapshot functions.
For example, let's look at the following OpenStack Web UI management page:
In this example, if you want to create a snapshot of ‘vol1’ on IBM XIV Storage System, you can use the ‘Create Snapshot’ action using either OpenStack CLI or Web UI.
Here is your created snapshot, as can be viewed from the XIV GUI:
Similarly, you can use OpenStack's ‘Create volume from snapshot’ action to create a volume based on an existing snapshot.
An additional ease-of-use enhancement in version 1.1.1 is the new unattended installation option, allowing no user interaction during the installation, perfect for automating the installation process. You can use the following command format to install the IBM driver in an unattended mode:
Cinder-node# ./install.sh –s –a <xiv_address> –u <username> –p <password> –o <pool_name>
The IBM Storage Driver for OpenStack can be downloaded here along with the Installation Guide and Release Notes.
Whenever you choose to integrate your IBM XIV Storage System with an OpenStack cloud environment, our driver is available to help you achieve this goal. We are happy to provide this newer version that further facilitates and enhances the utilization of your XIV storage resources and capabilities in your cloud environment.
As always, you are welcome to share your thoughts with us.
- The IBM Storage Host Software Development Group
It's been a while, but now we're back with our brand new IBM XIV Host Attachment Kit 2.0.0!
You probably noticed that we made the jump to version 2.0.0, and for a very good reason: We have an exciting new feature we've been developing for the last 6 months - xiv_host_profiler.
xiv_host_profiler introduces a new approach in the way we provide support to hosts connected to XIV systems. The utility gathers information about your host's configuration, analyzes it against a set of best-practice rules, and enables pre-emptive identification of storage connectivity problems. And this is exactly why we recommend running it on a regular basis.
This feature is also tightly integrated into our latest XIV System release 11.2. By default, when using xiv_host_profiler, the collected information gets uploaded to your XIV System for further analysis. This ability will assist our technicians to ensure your hosts' health before commencing XIV System upgrades or other procedures.
For privacy reasons, the information collected by xiv_host_profiler is only related to your host's storage connectivity status - items such as the host's HBA model, installed OS version and the configuration state of the multi-path framework.
After collecting the information, xiv_host_profiler is also able to analyze it against a bundled set of rules:
The rules against which we analyze the host's configuration will be updated regularly and can be downloaded from Fix Central.
As mentioned before, it's best to run xiv_host_profiler at least once a week (in order to keep the data as up-to-date as possible). We provide an easy way to do so - simply run 'xiv_host_profiler --create-scheduled-task'.
As usual, you can read more about xiv_host_profiler (and other HAK utilities) in the Host Attachment Guide and Release Notes, as well as in the man pages included in the HAK package (how? simply run 'man xiv_host_profiler').
We believe HAK 2.0.0 and the included xiv_host_profiler will further improve on the way we support our storage systems and the hosts connected to them. We'd love to hear more from you about your needs and expectations in the comments.
In the meantime, you can download yourself a copy of the Host Attachment Kit for your favorite host's operating system, right here.
The IBM Host Software Team
ZivKalmanovich 2700044YXC 2.125 Visualizações
A few days ago we have a released a new version of our VASA Provider for the XIV Storage System.
For those unfamiliar with VMware VASA or with the previous version of IBM Storage Provider for VMware VASA , here is some background:
VASA stands for vStorage API for Storage Awareness, and it is an API specified by VMware and implemented by storage vendors to standardize communication between the various storage systems and the vCenter Server. The Storage Provider is a web server that handles requests from the vCenter Server in which it is registered.
The IBM Storage Provider provides a standard interface for any connected VMware vCenter Server using VMware APIs for Storage Awareness (VASA), delivering information about XIV storage topology, capabilities and state, as well as storage events and alerts to vCenter Server in real time. VMware administrators can view this information on the vSphere Client management station, and can configure storage-related operations accordingly
For example an IBM VASA Provider registered in a VMware vCenter will provide the following information in the "Storage View" tab of the vShpere Client (both web and c#)
Screenshot from vShpere Client 5.1
In version 1.1.5 several major enhancements and changes were introduced:
The IBM Storage Provider for VMware v1.1.5 and the associated documentation can be downloaded from IBM Support Fix Central here (You'll need an IBM ID to download the files).
Your comments are always welcome,
IBM HSG Team
We have just released the IBM Storage Driver for OpenStack v1.2.0 and would like to share some of the more important features in this release.
The IBM Storage Driver for OpenStack is a software component that integrates with the OpenStack cloud environment and enables utilization of storage resources provided by the IBM XIV Storage System.
So what's new in our latest release?
Support for the OpenStack Grizzly release, which adds support for multiple storage backends on a single Cinder node. During the installation of the IBM Storage Driver for OpenStack v.1.2.0 on the Cinder node, the installation wizard will enable the configuration of multiple XIV storage backends, may it be two or more separate XIV systems or storage pools on the same XIV system.
Our Storage Driver now supports Fibre Channel (FC) storage connectivity to the compute node, in addition to the already supported iSCSI protocol.
To ease the installation and setup process of the new IBM Storage driver, we have enhanced the unattended installation of the IBM Storage Driver for Open Stack with the option to use a pre-configured ini file which includes the parameters of all the storage backends to be configured during the installation process.
In addition we introduced several fixes and code stability improvements.
The software and the related documentation can be downloaded from IBM Fix Central
The IBM HSG Team
ZivKalmanovich 2700044YXC 1.923 Visualizações
It's raining new releases here at IBM HSG, the latest software released from our team is the IBM XIV HAK v2.1.0.
The HAK is already a well known, widely used toolkit, therefore in this post we will focus on what's new in this latest release, and what will you gain by installing or upgrading to this version.
The first feature to note is the added support for version 11.3.0 of XIV microcode and more importantly for the Online Volume Migration (OLVM) feature. Now the "good old" xiv_devlist utility also presents the OLVM state of each and every volume exposed to the server, providing the host and storage administrators an easily accessible tool to stay updated with the migration state of the volumes under their responsibility, without the need to access the XIV Management GUI.
In addition, the recently introduced host diagnostic utility, the XIV Host Profiler , can now be defined as a scheduled task right from the Host Attachment Kit Wizard - xiv_attach. No need to remember to set it separately, the user will be asked during host configuration if a task should be scheduled to run the utility periodically.
We've also improved the xiv_devlist and xiv_syslist commands' CSV file format output utilities. From this release, by adding the --no-headers argument, the column headers will be omitted from the generated CSV file.
On top of the above-mentioned features and enhancements several stability issues were also fixed. The detailed list of those issues can be found in the Release Notes document coupled with the software package.
To download the IBM XIV Host Attachment Kit v2.1.0 and the related documentation , please visit IBM Fix Central. You will need an IBM ID to download the files.
The IBM Host Software Group