A new version of Spectrum Control Base Edition software (3.2.1) has been released. It adds support for version 8.1 of the IBM Spectrum Virtualize Family (a broad range of IBM storage systems), as well as the IBM Spectrum Virtualize deployable software solution. For further details about this new version, including fixes, check out the IBM Spectrum Control Base Edition 3.2.1 release notes on IBM Knowledge Center at: https://ibm.biz/Bdj8gc.
Cloud Storage Solutions
The last several releases of the OpenStack Cinder project addressed various disaster recovery (DR) scenarios. In Mitaka, replication v2.1 (codename ‘Cheesecake’) was introduced. This admin API was designed to solve a true DR scenario, when an entire backend is failed over to another backend on a secondary site. There are other DR scenarios in which the user wants to have better control over the replication granularity. For this purpose, the Cinder team has decided to provide tenant-facing group APIs, allowing volume grouping for a tenant. This enables volume group replication and failover without affecting the entire backend.
The IBM Storage Driver for OpenStack supports the following IBM storage systems:
The user can choose between a generic group replication and consistency group (CG) replication. For consistency group replication, the driver utilizes the storage capabilities to handle CGs and replicate them to a remote site. On the other hand, in generic group replication, the driver replicates each volume individually. In addition, the user can select the replication type. For example, IBM FlashSystem A9000 and A9000R storage systems support both synchronous and asynchronous replication.The minimum Cinder client version that supports group replication is 3.38.
The following functions were added to the IBM Storage Driver for OpenStack to support group replication:
The following example illustrates configuration of a replicated consistency group.
#cinder type-create rep-vol-1
#cinder type-key rep-vol-1 set replication_type='<is> sync' replication_enabled='<is> True'
#cinder group-type-create rep-cg-1
#cinder group-type-key rep-cg-1 set group_replication_enabled='<is> True' replication_type='<is> sync' consistent_group_snapshot_enabled='<is> True'
#cinder group-create rep-cg-1 rep-vol-1 --name replicated-cg-1
#cinder create --name vol-1 --volume-type rep-vol-1 1
#cinder group-update --add-volumes 91492ed9-c3cf-4732-a525-60e146510b90 replicated-cg-1
#cinder group-enable-replication replicated-cg-1
#cinder group-disable-replication replicated-cg-1
#cinder group-failover-replication replicated-cg-1
DmitriyIsayev 310000T63H Tags:  flash hyperswap sra high availability xiv vmware openstack 1 Comment 1,540 Views
Let’s face it: even the most resilient, robust, and secure storage sites, located above ground or even underground, could potentially be exposed, in a certain degree, to all kinds of disasters that may temporarily or indefinitely halt the site operation. This could be an extreme weather condition or natural disaster (hurricane, tornado, earthquake, etc.), a prolonged and unplanned interruption of power supply (power grid or power station failure), an accident, act of war, cyberattack, and who knows what else – God forbid…
Enterprises that rely on non-stop, continuous, and unbreakable access to data, as well as on the ability to keep existing data integrity in parallel to on-going update/writing operations at the highest possible standards, must have disaster prevention and recovery mechanisms in place, ready to be used at any point in time.
Enterprise-class storage systems, such as IBM XIV Gen3, IBM FlashSystem A9000, and IBM FlashSystem A9000R, provide advanced site mirroring capabilities, either synchronous or asynchronous, including 3-site mirroring for XIV Gen3, and HyperSwap for FlashSystem A9000 and A9000R. These native underlying replication and high availability (HA) technologies allow these IBM storage systems to serve not only conventional hosts and clusters, but also virtual machines in VMware and Microsoft cloud environments, as well as OpenStack cloud nodes.
Virtual machines duplicates can be deployed at a secondary backup site, together with the backup storage systems to serve those sites.
For detailed information about employing HyperSwap for VMware and Microsoft environments, refer to the IBM Redpaper: ‘IBM HyperSwap for IBM FlashSystem A9000 and A9000R’. Additional data protection scenarios are described in this IBM Redpaper: ‘IBM FlashSystem A9000 and A9000R Business Continuity Solutions’.
Host connection is a vital part of any storage system deployment procedure. Basically, a host is the physical computer or virtual machine that uses storage resources of the storage system, rather than having its own local storage. Accordingly, the hosts are defined on the storage system itself, allowing for this interaction.
Only hosts that are mapped to storage volumes can access those volumes on the storage system. Also, all host I/O operations must be equitably distributed among the storage interface modules. This workload balance is ensured by the storage administrator, who also monitors and assesses it over time when host traffic patterns change.
However, the host operating systems and network protocols come in different types and vendors. This variety presents a challenge to host administrators who must configure the host properly before it can perform on-going and uninterrupted I/O operations on the storage system. This is where the IBM Storage Host Attachment Kit (HAK) comes in handy.
The HAK for the IBM Spectrum Accelerate family – namely XIV, FlashSystem A9000 and A9000R, as well as the software-defined storage (SDS) Spectrum Accelerate deployable software – provides the host administrator with all the required tools for automatic and simpler host diagnostics, configuration, and attachment to the storage system. In addition, the HAK facilitates the monitoring and management of storage volumes from the host.
The HAK can be run on Linux (RHEL or SLES), Microsoft Windows Server, or IBM AIX hosts, and uses iSCSI or Fibre Channel SANs for connecting to the storage systems. Moreover, you can forgo the host installation altogether and use the HAK as a portable package (disk-on-key version). This allows you to run its utilities from a shared network drive or a portable USB flash drive.
Once the host is attached to storage system, defined on the storage device itself, and have the storage volumes mapped to the host, you can:
In all, the IBM Storage Host Attachment Kit is a nifty small-footprint program, indispensable for fast and smart storage deployment. Provided free of charge, it’s available for download from the IBM Fix Central.
For information about the latest version, check IBM Knowledge Center.
It would be quite accurate to state that virtualization technology today is gaining momentum, allowing companies to lower their total cost of ownership (TCO), reduce their datacenter footprint, ensure faster server provisioning, and more. However, implementing server virtualization without accounting for the storage element could cause problems, such as uneven resource sharing, as well as degradation in performance and data integrity.
Various IBM storage systems provide virtual enterprise storage for virtual servers. Specifically, the IBM storage systems work in concert with the following VMware virtualization platforms, standards, and environments:
To leverage, manage, and centralize this entire connectivity from a single interface, the IBM Spectrum Control Base Edition (SCBE) software package enables a simplified deployment and more efficient integration of different IBM storage systems (also referred to as storage arrays) and the VMware vCloud suite.
IBM Storage with VMware vSphere Web Client (vWC)
Without SCBE, when VMware administrators run out of disk space and request more space from the storage administrators, the storage increase provisioning may take quite a long time to implement and complete. This occurs mostly because of miscellaneous enterprise “red tape” procedures and processes. Moreover, before provisioning additional storage, storage administrators must fully understand the specific needs of the VMware administrators, then find available space on the attached storage systems, create and map storage volumes, and so on.
The SCBE solution uses an abstraction layer through a storage service and pre-defined sets of storage resources (pools) and capabilities (compression, encryption, etc). The services are prepared by storage administrators and provided for VMware administrators for fast and easy self-provisioning whenever required.
IBM Storage with VMware VASA and virtual volumes (VVols)
In the traditional data storage implementations, storage administrators manage multiple VMFS-based datastores with up to 7 TB in size and without explicit indication of storage capabilities. In addition, all VM snapshot and replication procedures are performed on the ESXi server side, without leveraging much faster hardware-based storage system capabilities.
The virtual volume (VVol) approach eliminates the VM granularity by introducing a single large VVol-based datastore with dynamic definition of storage policies (services) for provisioning storage resources exactly according to application requirements.
IBM Storage with VMware vRealize Orchestrator (vRO)
With the IBM Storage Plug-in for VMware vRealize Orchestrator, VMware administrators can include storage discovery and provisioning into their workflows. The plug-in allows issuing automated workflows with storage volumes that are attached to the vRealize Orchestrator server, eliminating the need for manual storage provisioning by storage administrators.
IBM Storage with VMware vRealize Operations Manager (vROps)
Monitoring IBM storage systems without VMware vROPs is limited to information about their physical objects. When using the IBM Storage Management Pack for vROPs, the storage systems are integrated into global monitoring network at the network operations center (NOC). The systems appear on vROPs dashboards, presenting in detail all relations between storage system objects (disks, ports, volumes etc) and VMware objects (datastores and VMs).
This somewhat belated blog post is meant to clarify the past, present, and future development of the IBM Storage Driver for OpenStack. For over 4 years, ever since the OpenStack Folsom release (when Cinder was still part of Nova), IBM Storage Driver for OpenStack has been released by IBM to support the integration of IBM XIV and IBM DS8000 storage systems with OpenStack cloud environments. In parallel, the IBM SAN Volume Controller, IBM Storwize Family, and IBM FlashSystem V9000 storage systems were already included in the OpenStack community source code. Throughout this period, the IBM XIV and IBM DS8000 storage driver remained proprietary. However, as community standards called for opening the driver source code, a decision to incorporate the driver into the community code has been made.
We decided to take the dive into the open-source code in version 2.0.0 of IBM Storage Driver for OpenStack, aiming to include IBM FlashSystem A9000 and A9000R, IBM XIV, IBM Spectrum Accelerate (deployable software), and IBM DS8000 Family systems in the community source code for the OpenStack Ocata release.
The journey of opening the code has been a unique one, as most drivers start as open, and do not evolve from a closed source code. But the challenge was met, and, as we are actually nearing the next release of version 2.1.0, we can make a full use of countless benefits of any open source software. Among them are:
Stay tuned for our next blog post when the community-based version 2.1.0 is released.
If you are looking for the driver’s up-to-date compatibility matrix, you can find it here.
The long and arduous road to HyperSwap is over! We are happy to announce a release of a new software version of our blazingly fast FlashSystem A9000 and A9000R. This is version 12.1, which brings HyperSwap to our storage clients. HyperSwap solution is an ingenious way of providing high availability based on active-active pairing of storage systems per volume or per consistency group. Each volume or consistency group pair uses synchronous replication to keep both systems updated at all times. When certain conditions apply, an automatic and completely transparent failover is performed, so that the applications experience no downtime. As soon as the actual failure is recovered, the pair is automatically resynchronized.
For easier integration with VMware, Linux, AIX and Windows platforms, we've upgraded these Cloud Storage Solution products:
Upgrade now to unleash the full power of the HyperSwap disaster recovery!
Yossi Siles, a Senior Offering Manager at IBM, published this article on the new software version for our all-flash IBM FlashSystem A9000 and A9000R storage systems with IBM HyperSwap support.
You may ask: version 3.2.0 is already available so soon? Our answer: yes. Although earlier this month we released IBM Spectrum Control Base Edition version 3.1.1, version 3.2.0 is a genuine breakthrough, bringing support for the Microsoft PowerShell automation tool, in addition to our already well-established VMware cloud integration offerings. The new IBM Storage Automation Plug-in for PowerShell provides 'cmdlets' for automated storage management, including provisioning, host mapping, volume expansion, and other storage-related tasks.
For the first time, you can download the plug-in from the Microsoft PowerShell Gallery website at: https://www.powershellgallery.com/packages/SpectrumControlBase-Client. For further details about this new version, including fixes and an experimental Flocker feature (might not be included in future versions), check out the IBM Spectrum Control Base Edition 3.2.0 release notes on IBM Knowledge Center at: https://ibm.biz/Bds7gK.
Alon Marx 270006TGYS 2,389 Views
We are happy to announce that we have released several drivers to support the new version of the OpenStack Cinder project: Ocata. This, however, is not an ordinary release, and here's why: previously, the drivers for IBM SAN Volume Controller, IBM Storwize Family, and IBM FlashSystem V9000 storage systems were the only ones included in the OpenStack community source code. Now, this latest release is a huge step forward aimed to include IBM FlashSystem A9000 and A9000R, IBM XIV, IBM Spectrum Accelerate (deployable software), and IBM DS8000 Family systems in the community source code as well, moving from proprietary code to being fully open-source. So henceforth, the IBM Storage Driver for OpenStack is part of the OpenStack Cinder repository. Accordingly, the driver documentation has also migrated from IBM Knowledge Center to the OpenStack community website: https://docs.openstack.org/ocata/config-reference/block-storage/drivers/ibm-storage-volume-driver.html
This release was developed in accordance with the OpenStack Ocata specifications, emphasizing our continuous commitment for providing IBM storage customers with cutting-edge OpenStack capabilities. In addition to the aforementioned integration in the community source code, this driver version includes enhancements in replication functionality (also known as "cheesecake") of the supported IBM systems, as well as improvements in multipath support, and auto-selection of I/O groups for Storwize storage systems.
As always, we are here to help with deployment and operation of our OpenStack drivers. Your feedback is important to us, and we'll be happy if you let us know what you think about this milestone release.
A new version of Spectrum Control Base Edition software (3.1.1) has been released. It replaces version 3.1.0 and brings support for the IBM FlashSystem A9000 and A9000R (12.0.3) storage capacity feature. In addition, it introduces a full compatibility with the current VMware vSphere Web Client Server requirements. For details about this new version, see the Spectrum Control Base Edition release notes on IBM Knowledge Center at https://ibm.biz/BdswcP.
Kia ora everyone.
DmitriyIsayev 310000T63H 1,474 Views
Information about supplementary storage integration solutions has been added to IBM Knowledge Center for the IBM Spectrum Accelerate Family products (FlashSystem A9000, FlashSystem A9000R, Spectrum Accelerate and XIV). It details the non-CSS software products available from IBM and independent software vendor (ISV) on the host side for storage provisioning, storage management, disaster recovery etc, and IBM storage systems supported by them.
For example, the information for IBM FlashSystem A9000 storage systems is located here.
The IBM Flash Centers of Competency has posted a very good blog about our latest SCB version
You can read the blog here
JohnHyams 27000777BW 1,557 Views
In continuation to my previous post about our YouTube channel (see below), we've just created our public list of favorite videos, which can be found here:
You can also view the official IBM channels to which we are subscribed on YouTube, and we invite you to subscribe to these channels as well:
As I noted in my previous post, please feel free let us know which kind of videos you'd like to see produced and posted on our channel. Whether it's how to use Spectrum Control Base Edition, Host Attachment Kit, or any of our Cloud Storage Solutions, you can post a comment to let us know :-) In the meantime, we're working on an introduction video for Spectrum Control Base Edition, which will focus more on why is it needed, as opposed to how to use it.
On behalf of the CSS team - thanks for your time!
JohnHyams 27000777BW 1,918 Views
To all our blog followers,
It may have slipped your radar (mostly because we haven't advertised it yet...), so we're happy to let you know about the YouTube channel of the Cloud Storage Solutions developer teams in Tel Aviv and Shanghai:
The content of this YouTube channel is produced and brought directly by the group developers themselves, so just be aware that the videos are provided on "as-is" basis.
At this point, the channel contains videos about IBM Spectrum Accelerate Family Provider for Microsoft Windows Volume Shadow Copy Service (applies to IBM XIV, IBM Spectrum Accelerate, and IBM FlashSystem A9000 and A9000R), and about IBM Storage Support for Microsoft Volume Shadow Copy Service and Virtual Disk Service (applies to the Spectrum Virtualize family storage systems).
We strive for improvement and enhancement, so please feel to post your comments on any particular video, and if you would like to see videos on solutions that are not yet on the channel, please let us know.
The Cloud Storage Solutions team
We are glad to announce the release of Spectrum Control Base Edition (SCBE) 3.1.
This new version introduces the following improvements:
Spectrum Control Base Edition 3.1 can be downloaded from Fix Central:
We'd be glad to hear your feedback!
Alon Marx 270006TGYS 2,202 Views
Hi guys, we have a surprise for you!
We have just released a Python library for our XCLI client. It's an open-source project and free for use by everyone under the Apache 2 license. It enables connecting to the storage and managing all its operations. It supports all XCLI managed storage types:
This is the first open-source version of the Python XCLI client library ever. This may not sound like such a big deal, but it actually is. It enables users to tailor the way they use the Spectrum Accelerate Family storage.
The XIV GUI is great, and so is the new IBM Hyper-Scale Manager and they let users to do almost anything with the storage. But there are cases that you would rather have specific functionality that is suitable just for you. The flexibility and power of Python and XCLI enables you to tailor it to your exact needs.
Let's take two simple examples:
1. You want to take snapshots for the production volumes in pool FOO every day. Just create a scheduled task and run the following script:
from pyxcli.client import XCLIClient
xcli = XCLIClient.connect_ssl('admin', 'adminadmin', 'mystorage.comp.com')
volumes = xcli.cmd.vol_list(pool='FOO).as_list
for volume in volumes:
2. You'd like to clean up your system and remove all empty volumes. Here is how you create a list of unused volumes:
from pyxcli.client import XCLIClient
xcli = XCLIClient.connect_ssl('admin', 'adminadmin', 'mystorage.comp.com')
volumes = [volume for volume in xcli.cmd.vol_list().as_list if volume.used_capacity == '0']
for volume in volumes:
The combined power of Python and XCLI management has been unleashed!
You are welcome to use it!
Download the package from:
- GitHub: https://github.com/IBM/pyxcli
or simply run 'pip install pyxcli' from your command prompt.
Tzur and Alon
OpenStack Newton is here, and with it - a new IBM Storage Driver (1.8.0) to support this release. In addition to the Newton support, version 1.8.0 brings the following enhancements:
Download the new release from IBM Fix Central:
Install and enjoy!
As promised, a new version of IBM Storage Management Pack for Microsoft System Center Operations Manager (SCOM), 2.6.0, is out. This release brings support for the newest releases of the following IBM storage products:
Install and enjoy!
Good news, everyone! Our IBM XIV Storage Replication Adapter (SRA), version 2.3.0 is fully certified to operate with the following releases of the VMware vCenter Site Recovery Manager: 5.5, 5.5 Update1, 5.8, 6.0 and 6.1. In addition, this release brings support for synchronous mirroring, using the newest IBM's all-flash storage offerings: ultra-fast IBM FlashSystem A9000 and IBM FlashSystem A9000R.
IBM Spectrum Control Base Edition has been upgraded to a new version - 3.0.1. This release replaces the previous version (3.0.0). It brings significant enhancements in the application performance and stability. These include:
For nearly a year in development, a new version of IBM Storage Management Pack for Microsoft System Center Operations Manager (SCOM), 2.5.0, is out. This release brings support for the latest IBM's all-flash storage systems: super-fast IBM FlashSystem A9000 and IBM FlashSystem A9000R with microcode 12.0.x. In addition, it supports the newest releases of the following IBM storage products:
Note: FlashSystem V9000 will be supported in Q3 of 2016.
OpenStack Mitaka is upon us, and with it - a new IBM Storage Driver to support this release. This time it is version 1.7.0. This release brings support for the newest IBM's all-flash storage offerings: ultra-fast IBM FlashSystem A9000 and IBM FlashSystem A9000R. In addition, it brings the following exciting features:
Install and enjoy!
A new version of the IBM XIV Provider for Microsoft Windows Volume Shadow Copy Service (VSS), version 2.8.0, joins the ranks of the IBM's cloud storage solutions that support the newly introduced all-flash IBM FlashSystem A9000 and IBM FlashSystem A9000R.
DmitriyIsayev 310000T63H 1,822 Views
A new version of the IBM Storwize Family Storage Replication Adapter is here. It's version 3.2.0, which adds support for the local HyperSwap for IBM SVC and Storwize systems, running IBM Spectrum Virtualize software. This new topology is used with VMware vSphere to enable transparent VMware vMotion migration and automatic VMware HA failover of virtualized workloads between physical data centers. This update:
DmitriyIsayev 310000T63H 1,284 Views
A new milestone for IBM Spectrum Control Base Edition - version 3.0.0. This release brings support for the newest IBM's all-flash storage offerings: ultra-fast IBM FlashSystem A9000 and IBM FlashSystem A9000R. In addition, the web management interface of the package has been enhanced and improved to support the abstracted storage provisioning method. This release can be installed on RHEL 7.0–7.2.
DmitriyIsayev 310000T63H 1,480 Views
We are proud to announce a new HAK release - version 2.6.0. Starting from this version, IBM XIV Host Attachment Kit has been renamed to IBM Storage Host Attachment Kit to indicate support for additional storage systems, including the newly announced all-flash IBM FlashSystem A9000 and IBM FlashSystem A9000R. In addition, this version introduces support for RHEL 7.2, SLES 12 and SLES 12 SP1. Moreover, selected Linux releases can now be run on IBM Power Systems servers, as detailed in the HAK release notes.
The new and improved OpenStack Cinder driver for IBM SVC, Storwize Family, and FlashSystem V9000 storage systems has been released! This release complies with the OpenStack Mitaka specifications, enabling IBM storage customers to fully utilize the cutting-edge OpenStack data storage enhancements.
The new features include:
Moreover, the new SVC and Storwize Family microcode version (7.7) will be supported at its release on June 1, 2016 without any driver code change.
Upgrade and enjoy!
VMware administrator, provision new datastores for your applications yourself, using IBM Storage Enhancements for vSphere Web Client. Use abstracted storage services, provided by your storage administrator. The services are consistent with application requirements with extendable storage space and VVol support. IBM Storage Enhancements for vSphere Web Client come packaged with IBM Spectrum Control Base Edition, a nifty storage provisioning tool integrated with a variety of VMware solutions for automation, monitoring, orchestration and native support of VVols and VASA API. Check the solution overview on YouTube at https://youtu.be/tf-0LGABZK8.
To make this happen, IBM has teamed up with VMware, creating a better experience for administrators and end users. We are proud to be one of the first partners in VMware's Web Client Plug-in certification program.
We worked hard and it finally happened! Our own IBM XIV Storage Replication Adapter (SRA), version 2.2.2 is fully certified to operate with the following releases of the VMware vCenter Site Recovery Manager: 5.5, 5.5 Update1, 5.8, 6.0 and 6.1. Although this version is considered a minor release, making the SRA work with all the latest SRM versions was a challenging goal, involving a battery of compatibility tests and closely tied cooperation between the IBM and VMware interoperability teams.
Time to do some XIV mirroring :).
We're pleased to announce the release of the new IBM DS8000 Storage Replication Adapter version - 2.3.1. As you know, IBM DS8000 Storage Replication Adapter is a software add-on that integrates with VMware vCenter Site Recovery Manager (SRM) solution. It enables SRM to perform failovers together with IBM DS8000 storage systems.
This release brings the following new features:
In addition, version 2.3.1 introduces support of the all-new member of the DS8000 family, DS8880 (v.8.0), enhancing its industry-leading disaster recovery capabilities.
We are proud to announce that the IBM Storage Driver for OpenStack has been recently upgraded to a new version - 1.6.0. This version brings support for OpenStack Liberty release, as well as for DS8870 microcode version 7.5 SP3 and DS8880 version 8.01. In addition, this release introduces the XIV and Spectrum Accelerate support for the OpenStack consistency groups. It also brings in the RESTful API that replaced the Java-based ESSNI driver in DS8000 storage systems.
IBM Storage Support for Microsoft Volume Shadow Copy Service and Virtual Disk Service, version 4.11.0.
A new version of IBM Storage Support for Microsoft Volume Shadow Copy Service and Virtual Disk Service has been released. This is version 4.11.0, which introduces support for the following storage system microcodes:
Also, version 4.11.0 adds support for temporary (non-persistent) read/write access to a snapshot.
IBM Spectrum Control Base Edition has been upgraded to a new version - 2.2.1. This release replaces the previous version (2.2.0). It introduces support for the VMware virtual volume (VVols) and Storage Policy Based Management (SPBM) technologies for the storage systems that run the IBM Spectrum Virtualize software with microcode version 7.6.0. These are:
Additional changes include support for new data encryption method used by the Spectrum Virtualize software and ability for a storage resource attached to a VVol-enabled service to use other storage resources for VVol snapshots if it has reached its capacity.
We are happy to announce the release of an updated OpenStack Cinder driver for IBM Spectrum Virtualize, Storwize Family and FlashSystem V9000. This release complies with OpenStack Liberty specifications, emphasizing IBM's continuous commitment to making the cutting-edge OpenStack features available for IBM storage customers.
Another change is the enabling or disabling the fast format option during thick volume creation. As some volume operations are disabled until fast format is completed, the customer can now skip the fast format, when creating a thick volume. This makes the volume operational immediately after its creation.
Version 7.6 of IBM Spectrum Virtualize and Storwize Family will be supported after its release with no additional Cinder driver code change.
We are proud to announce that the IBM XIV Host Attachment Kit has been recently upgraded to a new version - 2.5.0. This release brings support for XIV microcode version 11.6.x, IBM Spectrum Accelerate 11.5.1.x, and RHEL 7.1. In addition, this version introduces a hot feature - the host-side acceleration (HSA) for improved iSCSI communication between Spectrum Accelerate and a host.
Another change is a deprecation of the -L option of the xiv_iscsi_admin and xiv_fc_admin commands, reserving the ability to list the attached storage devices for the xiv_syslist -L command only.
IBM Spectrum Control Base Edition continues its evolution with a new version - 2.2.0. This release brings support for VMware VASA 2.0 without virtual volumes for DS8870 7.5.x (using patch DS8870_REST_API_7.7.51.xx.zip) and adds support for IBM Spectrum Accelerate version 11.5.1.x.
Additional changes include ability to manage storage resources directly from the pool list per storage system or storage service, using the Spectrum Control Base GUI. Also, starting from version 2.2.0, DS8870 storage systems make use of the RESTful API client to simplify the Spectrum Control upgrade and installation procedures, eliminating the need for previously used JRE extension bin files.
In general, IBM Spectrum Control Base Edition became a more robust, use-friendly and fault-tolerant solution for managing multiple IBM storage platforms.
Alon Marx 270006TGYS 3,124 Views
It's been a long 9 months since the release of the IBM XIV HAK 2.2.0 and we're back with a new exciting release - IBM XIV HAK 2.3.0 .
Example 1: Cleaning up a stale device
The next feature is also a response to customers needs. People using Veritas Dynamic Multi-Pathing (DMP) had issues running xiv_attach, as it always configured and initiated the native multipath framework. Two multipath frameworks on the same host is like having two managers not speaking to each other, each pulling in another direction.
Example 2: xiv_attach in presence of Veritas DMP
A third feature relates to the new release of XIV Microcode 11.5 and a feature we call Multi-Tenancy. Let's say you have two companies working on the same storage, each with it's own data that should never ever get to the other company. The storage can be divided into domains so that each is maintained by separate people, unaware of each others work. From the point of view of the storage administrator running xiv_attach or xiv_iscsi/fc_admin, he just uses his credentials to connect to the storage and everything behaves as expected. In case a user is able to see more than one domain (e.g. in case of domain per department) he is able to specify the domain the host should be using via a flag in the xiv_iscsi/fc_admin command line.
Alon Marx 270006TGYS 2,264 Views
We’ve recently released a new version of the Storage Enabler for Windows Failover Clustering. As you may know, it is a software agent that runs as a Microsoft Windows Server service on two geographically dispersed cluster nodes, providing failover automation for IBM XIV storage provisioning on these nodes, and enabling deployment of these nodes in a geo-cluster configuration.
The new version, 1.2.0, is mainly a maintenance release that resolves some previous limitations and provides support for the new IBM XIV and Microsoft Windows Server versions that have been released since version 1.1.0.
So, what's new in version 1.2.0? Here are the main things:
Support for Microsoft Windows 2012 R2
Support for XIV microcode versions 11.2, 11.3 and 11.4
Support for post-migrated Hyper-Scale Mobility volumes (supported in XIV microcode version 11.3 or later)
The IBM Hyper-Scale Mobility feature is used for online migration of volumes from one XIV storage system to another (for more detailed information, see "IBM XIV Storage System: IBM Hyper-Scale Mobility Overview and Usage" here: http://www.redbooks.ibm.com/abstracts/redp5007.html).
An important note to make is that previous IBM Storage Enabler versions (1.1.0 or earlier) could not be used to protect volumes that have been migrated through the Hyper-Scale Mobility feature. In such cases, you could no longer use the IBM Storage Enabler with these volumes.
Now, version 1.2.0 of the IBM Storage Enabler resolves this limitation by allowing protection after the final migration state (after performing ‘End Proxy’). Starting from this version, the IBM Storage Enabler can be reconfigured with the migrated volume and resume its protection in just a few steps.
Here is what you will need to do before the protection of the IBM Storage Enabler can be resumed on the migrated volume:
First, upgrade the IBM Storage Enabler on all the cluster nodes to version 1.2.0. Then, remove from the cluster any XIV volume that you want to migrate with Hyper-Scale Mobility. Once removed from the cluster, you can start the migration of these volumes.
When the migration process is complete, ensure that the original XIV proxy volume (which was migrated) is removed from the original XIV storage system. Also ensure that a mirror relationship between the source and XIV destination volumes exists.
You can then add the migrated XIV volumes back to the MSCS cluster.
Finally, run the following commands to add the XIV mirror resource dependency to the newly added (migrated) volumes, and to verify the configuration:
That’s it. As always, we are happy to receive any feedback!
The IBM Storage Host Software Group (HSG)
Lihi Tikolsky 2700057XTN 2,435 Views
We've just released the IBM Storage Driver for OpenStack v.1.3.0, get it
now while it's hot from the oven!
IBM Storage Driver for OpenStack v1.3.0 package now includes:
* OpenStack Havana Support (Including Volume migration)
* IBM DS8000 Storage System in addition to the IBM XIV Storage System
* In addition to Ubuntu 12.04 x64, we now also support RHEL 6.4 x64
* The driver package now includes a script for creating OpenStack Cinder Volume types. Read about Openstack Cinder volume types here.
Lets look at an example of the Volume types script we mentioned:
Assuming you have the following two backends configured in your cinder.conf file:
You can now run the 'create_volume_types.sh' script, to automatically create volume types to point to these backends.
After running this script, you can see your automatically created Volume types by running:
This is it!, your volume types are set and you can now use them when creating volumes:
#cinder create --volume-type IBM-XIV_hostdev31f.xiv.ibm.com_vwc_iscsi --display-name vol_hostdev31f 5
For further details, the software and related documentation can be downloaded from IBM Fix Central
Alon Marx 270006TGYS 2,922 Views
It's been 4 months since the release of the IBM XIV HAK 2.1.0 and we're back with a new release - IBM XIV HAK 2.2.0.
So what's new in this release? We won't bother you with all the changes and fixes - you can find the detailed list in the Release Notes document coupled with the software package. We would however like to point out that the new release supports a new operating system - Microsoft Windows Server 2012 R2 - an important step by itself. But the main feature of this release is related to xiv_host_profiler and the way 'analyze' operates.
Since the addition of xiv_host_profiler utility in the HAK 2.0.0 release, we see growing interest in this application. Administrators want to know that the system they are working on is configured right and how to improve their settings. Makes sense, doesn't it?
The problem was that the analysis was based on the latest microcode released, and this is not the common situation in the field. Following the famous "if it ain't broken don't fix it" approach, upgrading the storage microcode is not done as frequent as we'd like it to happen. So for example, although a microcode version 11.1.x is used, the administrator would get the analysis results of 11.2.0 (HAK 2.0.0) or 11.3.0 (HAK 2.1.0) which have different rules.
To solve this problem in the new HAK release we collect the microcode versions of the connected XIV storage and the analysis is based on these versions. So if your host is connected to 10.2.4 or to 11.2.0 or 11.3.0, you can expect different results. In the following example you can see the same host running against two different microcode versions with two different analysis results.
And what about testing your configuration against a different microcode version? For example, if you have an XIV system running microcode 11.2.0 and you want to upgrade to 11.4.0 - will your host configurations still be valid? So we added an option for the user to specify the microcode version he is interested in.
To download the IBM XIV Host Attachment Kit version 2.2.0 and the related documentation, please visit IBM Fix Central.You will need an IBM ID to download the files.
The IBM Host Software Group
If you happen to be using one or more IBM storage systems that are serving your VMware environment, we invite you to check out our recently released ’IBM Storage Integration Server’, a software solution that consolidates all your IBM storage usage through a single backend deployment.
You can add your IBM storage arrays into the scope of IBM Storage Integration Server in just one step, by using your storage user credentials as shown in the following example from the web-based management interface:
Once added, the arrays would be available to all supported solutions, without having to re-add each storage array separately for each solution or for any future supported solution.
This single integration server reduces the amount of management traffic and shares the queried storage information with all the supported solutions. The first release, version 1.1.0, introduces support for ‘IBM Storage Enhancements for VMware vSphere Web Client’ and for ‘IBM Storage Provider for VMware VASA’.
‘IBM Storage Enhancements for vSphere Web Client’ enables native visibility and provisioning of IBM storage volumes (LUNs) within VMware vSphere Web Client. These enhancements bring the value of the already known and acclaimed IBM Storage vCenter plug-in, formally known as ‘IBM Storage Management Console for VMware vCenter’, to the new web-based VMware vSphere Web Client, which allows the integration of multiple vCenter servers instead of one.
VMware administrators who were previously daunted by the thought of the complex task of connecting and utilizing storage resources through vSphere Web Client – can now be much more relaxed with the ability to easily create and manage storage volumes in delegated storage pools, which were attached by the storage administrators on the IBM Storage Integration Server side.
‘IBM Storage Provider for VMware VASA’, previously a standalone plug-in, is now a feature of the IBM Storage Integration Server, adding the following enhancements:
· Supports the IBM Storwize family in addition to the existing IBM XIV support.
· Storage capabilities are automatically defined and assigned, eliminating the need for manual definition and assignment.
That’s about it, for now J
More to come soon!
You can download the IBM Storage Integration Server software package and the related documentation from the IBM Fix Central.
You can also view the online documentation at our information center.
As always, we would be happy to have your comments and thoughts.
The IBM Storage Host Software Group (HSG)
ZivKalmanovich 2700044YXC 3,294 Views
It's raining new releases here at IBM HSG, the latest software released from our team is the IBM XIV HAK v2.1.0.
The HAK is already a well known, widely used toolkit, therefore in this post we will focus on what's new in this latest release, and what will you gain by installing or upgrading to this version.
The first feature to note is the added support for version 11.3.0 of XIV microcode and more importantly for the Online Volume Migration (OLVM) feature. Now the "good old" xiv_devlist utility also presents the OLVM state of each and every volume exposed to the server, providing the host and storage administrators an easily accessible tool to stay updated with the migration state of the volumes under their responsibility, without the need to access the XIV Management GUI.
In addition, the recently introduced host diagnostic utility, the XIV Host Profiler , can now be defined as a scheduled task right from the Host Attachment Kit Wizard - xiv_attach. No need to remember to set it separately, the user will be asked during host configuration if a task should be scheduled to run the utility periodically.
We've also improved the xiv_devlist and xiv_syslist commands' CSV file format output utilities. From this release, by adding the --no-headers argument, the column headers will be omitted from the generated CSV file.
On top of the above-mentioned features and enhancements several stability issues were also fixed. The detailed list of those issues can be found in the Release Notes document coupled with the software package.
To download the IBM XIV Host Attachment Kit v2.1.0 and the related documentation , please visit IBM Fix Central. You will need an IBM ID to download the files.
The IBM Host Software Group
We have just released the IBM Storage Driver for OpenStack v1.2.0 and would like to share some of the more important features in this release.
The IBM Storage Driver for OpenStack is a software component that integrates with the OpenStack cloud environment and enables utilization of storage resources provided by the IBM XIV Storage System.
So what's new in our latest release?
Support for the OpenStack Grizzly release, which adds support for multiple storage backends on a single Cinder node. During the installation of the IBM Storage Driver for OpenStack v.1.2.0 on the Cinder node, the installation wizard will enable the configuration of multiple XIV storage backends, may it be two or more separate XIV systems or storage pools on the same XIV system.
Our Storage Driver now supports Fibre Channel (FC) storage connectivity to the compute node, in addition to the already supported iSCSI protocol.
To ease the installation and setup process of the new IBM Storage driver, we have enhanced the unattended installation of the IBM Storage Driver for Open Stack with the option to use a pre-configured ini file which includes the parameters of all the storage backends to be configured during the installation process.
In addition we introduced several fixes and code stability improvements.
The software and the related documentation can be downloaded from IBM Fix Central
The IBM HSG Team
ZivKalmanovich 2700044YXC 3,559 Views
A few days ago we have a released a new version of our VASA Provider for the XIV Storage System.
For those unfamiliar with VMware VASA or with the previous version of IBM Storage Provider for VMware VASA , here is some background:
VASA stands for vStorage API for Storage Awareness, and it is an API specified by VMware and implemented by storage vendors to standardize communication between the various storage systems and the vCenter Server. The Storage Provider is a web server that handles requests from the vCenter Server in which it is registered.
The IBM Storage Provider provides a standard interface for any connected VMware vCenter Server using VMware APIs for Storage Awareness (VASA), delivering information about XIV storage topology, capabilities and state, as well as storage events and alerts to vCenter Server in real time. VMware administrators can view this information on the vSphere Client management station, and can configure storage-related operations accordingly
For example an IBM VASA Provider registered in a VMware vCenter will provide the following information in the "Storage View" tab of the vShpere Client (both web and c#)
Screenshot from vShpere Client 5.1
In version 1.1.5 several major enhancements and changes were introduced:
The IBM Storage Provider for VMware v1.1.5 and the associated documentation can be downloaded from IBM Support Fix Central here (You'll need an IBM ID to download the files).
Your comments are always welcome,
IBM HSG Team
It's been a while, but now we're back with our brand new IBM XIV Host Attachment Kit 2.0.0!
You probably noticed that we made the jump to version 2.0.0, and for a very good reason: We have an exciting new feature we've been developing for the last 6 months - xiv_host_profiler.
xiv_host_profiler introduces a new approach in the way we provide support to hosts connected to XIV systems. The utility gathers information about your host's configuration, analyzes it against a set of best-practice rules, and enables pre-emptive identification of storage connectivity problems. And this is exactly why we recommend running it on a regular basis.
This feature is also tightly integrated into our latest XIV System release 11.2. By default, when using xiv_host_profiler, the collected information gets uploaded to your XIV System for further analysis. This ability will assist our technicians to ensure your hosts' health before commencing XIV System upgrades or other procedures.
For privacy reasons, the information collected by xiv_host_profiler is only related to your host's storage connectivity status - items such as the host's HBA model, installed OS version and the configuration state of the multi-path framework.
After collecting the information, xiv_host_profiler is also able to analyze it against a bundled set of rules:
The rules against which we analyze the host's configuration will be updated regularly and can be downloaded from Fix Central.
As mentioned before, it's best to run xiv_host_profiler at least once a week (in order to keep the data as up-to-date as possible). We provide an easy way to do so - simply run 'xiv_host_profiler --create-scheduled-task'.
As usual, you can read more about xiv_host_profiler (and other HAK utilities) in the Host Attachment Guide and Release Notes, as well as in the man pages included in the HAK package (how? simply run 'man xiv_host_profiler').
We believe HAK 2.0.0 and the included xiv_host_profiler will further improve on the way we support our storage systems and the hosts connected to them. We'd love to hear more from you about your needs and expectations in the comments.
In the meantime, you can download yourself a copy of the Host Attachment Kit for your favorite host's operating system, right here.
The IBM Host Software Team
In this post we would like to introduce the latest version of the IBM Storage Driver for OpenStack, which we released on January 31st, 2013.
If by any chance you are unfamiliar with OpenStack, check out the official OpenStack project website at: www.openstack.org
To put in a few words, OpenStack is an open-source software platform for building private and public cloud environments. The IBM driver is a software component that enables storage provisioning of the IBM XIV Storage Systems in OpenStack cloud environments.
The latest IBM driver version was preceded by an earlier one (1.1.0), which enabled basic storage provisioning operations, such as volume creation and deletion from OpenStack Cinder Node, and volume attachment to OpenStack VMs.
The new release (1.1.1) further enhances the integration between OpenStack and IBM XIV Storage System by adding support for XIV volume snapshot functions.
For example, let's look at the following OpenStack Web UI management page:
In this example, if you want to create a snapshot of ‘vol1’ on IBM XIV Storage System, you can use the ‘Create Snapshot’ action using either OpenStack CLI or Web UI.
Here is your created snapshot, as can be viewed from the XIV GUI:
Similarly, you can use OpenStack's ‘Create volume from snapshot’ action to create a volume based on an existing snapshot.
An additional ease-of-use enhancement in version 1.1.1 is the new unattended installation option, allowing no user interaction during the installation, perfect for automating the installation process. You can use the following command format to install the IBM driver in an unattended mode:
Cinder-node# ./install.sh –s –a <xiv_address> –u <username> –p <password> –o <pool_name>
The IBM Storage Driver for OpenStack can be downloaded here along with the Installation Guide and Release Notes.
Whenever you choose to integrate your IBM XIV Storage System with an OpenStack cloud environment, our driver is available to help you achieve this goal. We are happy to provide this newer version that further facilitates and enhances the utilization of your XIV storage resources and capabilities in your cloud environment.
As always, you are welcome to share your thoughts with us.
- The IBM Storage Host Software Development Group
We are pleased to let you know about our recently launched IBM Storage Host Software Solutions Information Center!
In this information center, or IC, you can find the relevant documentation of all the solutions that we offer, including information of both past versions and the latest versions.
Whether our host software solution is for XIV, DS8000, Storwize, or any other IBM storage system – the release notes, user guide, or installation guide are available on the IC in either PDF or HTML format (whatever suits you best).
The solutions are categorized on the navigation tree under four main categories: business continuity, management, host connectivity, and virtualization. Keep in mind, however, that some solutions could belong in more than one category. For example, a solution such as IBM Storage Management Console for VMware vCenter is placed under the virtualization category, but it may also be regarded as a powerful management solution. For another example, our XIV and SVC adapters for VMware vCenter Site Recovery Manager, also placed under virtualization, may also be regarded as business continuity solutions.
In any case, we hope that the organization of our solutions on the IC makes sense to you, and that the information is helpful. If not, please let us know! You can use the online feedback form that is available on the IC.
Each solution has its own welcome page from which you can have quick access to the information of the available versions. The PDF publications are available on the Publications page of each solution.
If you'd like to see our list of solutions per independent software vendor (ISV), check out the Solutions by ISV page. Alternatively, to see which solutions are available for a specific IBM storage system, check out the Solutions by storage system page.
And, of course, the IC is regularly being updated and improved. You can always check what's new on the IC by visiting the What's new page.
Lastly, we would like to thank our Information Development team for making it happen.
The HSG Team
ZivKalmanovich 2700044YXC 3,020 Views
We have just made the latest version of IBM Storage Enabler for Windows Fail-over Clustering publicly available on IBM Fix Central.
I would like to highlight some of the new features and improvements introduced in version 1.1.0:
In addition several major issues were resolved, such as those related to deployments where XIV disks resided in the 'Available Storage' cluster group and issues related to XIV Mirror resource behavior upon Cluster Service failure.
The new version of the IBM Storage Enabler for Windows Fail-over Clustering and the related documentation can be found here.
Happy Clustering !
The IBM Host Software Group
Once again, we are proud to announce the release of the latest IBM XIV Host Attachment Kit 1.10.0.
The main feature of this release is Windows Server 2012 support. From this version onward, HAK is fully compatible with your new & shiny installation of Windows Server 2012. Go ahead and take it for a spin!
As part of our ongoing efforts to improve ease of use, we have translated the Windows Installer of HAK to Japanese as well, for the benefit of our Japanese speaking users. More languages to follow.
In addition to the above, we have also resolved several bugs and known issues from previous versions, including among others:
Of course that's not all - You may read more about these improvements as well as the rest of the enhancements and fixes in the Release Notes.
We hope you will enjoy this new release of the Host Attachment Kit, at least as much as we enjoyed developing it!
Follow this link to download the installable or portable packages and access the release documentation.
If you have comments, questions or requests, please write to us in the comments section below. We'd love to hear from you.
The IBM Host Software Team
Hi everyone, we have some great news for VMware SRM 4.1.x users.
The new IBM XIV Adapter for VMware vCenter SRM 4.1.x was released!
The IBM XIV Adapter version 4.1.0 adds support for XIV's GEN3 systems, and also fixes a couple of bugs.
So if you are using SRM 4.1 - you can now use it with both XIV GEN2 (microcode version 10.2.x) and XIV GEN3 (microcode version 11.x)!
You can download the IBM XIV adapter software package from the SRM 4.1.2 download page (after clicking the View Downloads button, the IBM XIV adapter is listed on the page).
Feel free to ask us any question.
Lihi Tikolsky from the IBM XIV Host Software team.
Hi Everyone !
It's HAK release time again !!
As part of our ongoing efforts to keep the IBM XIV Host Attachment Kit up to date and provide enhanced and new functionality, we are proud to announce the latest Host Attachment Kit version 1.9.0.
In this new version we have added support for several new platform versions:
Solaris 11, the recently released Red Hat Enterprise Linux 6.3 and the latest AIX 5.3, AIX 6.1 and AIX 7.1 Service Packs which introduce IBM XIV LUN 0 support.
But we did more than that. We have also enhanced the current HAK functionality by providing our UNIX & Linux users with manual pages accessible by using the 'man' command. Now you can access the documentation for each HAK command by executing 'man <HAK command>'.
In addition, in AIX OS, 'xiv_attach' is now capable of automatic discovery of connected XIV systems and host definition on the connected XIV, by utilizing the latest AIX 5.3, AIX 6.1 and AIX 7.1 SP, in which XIV LUN0 support was added. This aligns the XIV support in AIX OS with that of other supported OS-s. Moreover, LUN0 support also introduces a new HAK utility to AIX HAK users - 'xiv_syslist' , which you can read more about here.
The log collection utility, 'xiv_diag', was enhanced and now can be executed in unattended mode by providing the command with the destination path for the compressed log collection package as a command line argument.
Finally, additional bugs and known issues were resolved, and you can read more about them in the Release Notes.
Follow this link to download the installable or portable packages and access the release documentation.
Let's keep in touch!
The IBM Host Software Team
The new version adds the following enhancements for XIV users:
From now on, for each new volume you create on the storage system, the IBM storage plug-in enforces the chosen MP policy. Alternatively, if you choose Disable Multipath Policy Enforcement, no MP policy is enforced (in such a case, VMware’s default MP policy for the storage array will be in effect).
These enhancements also apply to other IBM storage systems that the plug-in supports. In addition, version 3.0.0 introduces support for IBM Storwize V7000 Unified and IBM Scale Out Network Attached Storage (SONAS) as well as various bug fixes. You can check out the release notes for more details.
After you’ve heard all that, you can now go ahead and download the IBM Storage Management Console for VMware vCenter version 3.0.0 along with its documentation from the IBM Fix Central.
We’d love to hear your thoughts and comments, so please share them with us!
We are happy to announce our newest edition of the IBM XIV Host Attachment Kit, version 1.8.0. This release includes a new utility and support for new operating system versions, as well as several bug fixes and code infrastructure improvements.
And now, let's dive into the details:
Starting with our cool new utility, called "xiv_syslist"... This new tool in the HAK will provide great assitance to host and storage administrators, by exposing useful storage array details from the server/host point of view. What kind of details? Without turning this post into a User Guide, the list of storage array details includes (for each array connected to the host): Array name, Array Serial, Management IPs, Connected Modules & Ports, Connectivity Types, Host Name Defined and Host Ports Definition State. The output can be formatted as xml or csv, as well as regular text output.The "xiv_syslist" utility is available on all platforms supported by the HAK.
In addition we have broadened our list of supported OS versions and now it also includes: SLES 11 SP2, RHEL 5.8, Solaris 10 u10, AIX 7.1 TL1 and AIX 6.1 TL7.
We would love to hear from you, please leave your questions and comments below.
The IBM XIV Host Software team
We are excited to announce release of IBM XIV SRA 2.1.0 that is compatible with VMware Site Recovery Manager 5.0.
About SRM 5.0:
Site Recovery Manager 5.0 includes three major additions to the workflow capabilities:
About IBM XIV SRA 2.1.0 with VMware SRM 5.0:
The IBM XIV SRA extends SRM capabilities and allows it to seamlessly employ XIV replication and mirroring as part of the SRM comprehensive Disaster Recovery Planning (DRP) solution.
Using the IBM XIV SRA, VMware administrators can automate the failover of an XIV system at the primary SRM site to an XIV system at a recovery (secondary) SRM site. Immediately upon a failover, the ESX/ESXi servers at the secondary SRM site start using the replicated datastores on the mirrored volumes of the secondary XIV system.
That's great ! But where can I get It ?
It's already available at the VMware download page of SRM 5.0.1 (You can click on the "Show Details" link inside the "Components" section to reveal the list of SRA components with IBM XIV SRA included)
We would love to hear from you, please leave you questions and comments below.
IBM XIV Host Software team
The XIV Host Software team is happy to announce the 2011Q4 release of the XIV Host Attachment Kit, version 1.7.1.
Note that this is mostly a maintenance release with a couple of improvements. Upgrade is recommended but not mandatory. Go ahead and take HAK for a spin and tell us what you think in the comments below. In the provided link, you can get HAK 1.7.1 for all supported platforms, Host Attachment Guide, and platform-specific Release Notes.
Release HighlightsWe recommend checking out the full list of changes and known issues for a specific platform in the corresponding Host Attachment Kit 1.7.1 Release Notes, available in the link above.
We've invested a lot in internal test and development improvements. Most notably we've increased the automated test coverage and improved our automated build environment. This allows us to provide you with a better tested, higher quality product.
Got comments? we'd like to hear them!
- The XIV Host Software team
orenhe 270001V1S7 2,215 Views
In this blog we'll try to provide you with the latest news from our XIV Host Software team.
We'll focus on the following products, which we develop for XIV Storage System customers:
More info to follow!