ThomasRogers 270006MA78 Visits (1787)
Whether you're already familiar with the Workbench or completely new to it there are a lot of new changes in v11. So why not check out the MDM
There's also a major new addition to the Wiki if you're looking for more information on installing MDM on Linux head over t
There is a typical workstation install that automatically sets up a full development and test environment, described in the 'Full development environment install' section of the Inst
The alternative is to manually install the MDM Workbench for MDM configuration and development, and an Operational Server for test purposes. In this example I will install a full development and test environment on Windows, using a DB2 database. The instructions below assume that you do not have any of the prerequisite software installed but, if you do, just skip the relevant steps.
To avoid problems with path lengths, special characters, or Windows virtualised directories, I installed all the software under a C:\IBM directory.
This blog post is accompanied by a seri
Downloading and extracting install images
These are all the install images I downloaded. See the Down
Important: If you are about to install MDM but downloaded the install images before 17th October 2013, you must download the product refresh first.
Important: The workbench install will fail if the .tar.gz install images are extracted using WinZip. So far it looks like the Download Director unpack option, WinRAR, and 7-Zip all work but please leave a comment if you have problems with any unzip tools and I'll update the list.
IBM Installation Manager V1.6.0
This is required to install everything except DB2.
Part number: CIM7CML
DB2 Enterprise Server Edition V10.1
I used fix pack 2 to install DB2, available via the DB2
Part number: CI6WEML
Installation Startup Toolkit
This provides the scripts required to create an MDM database.
Part number: CIR9WML
Master Data Management Standard & Advanced Edition
This is the actual MDM Operational Server install.
Part numbers: CIR9NML, CIR9PML, CIR9QML, CIR9RML, CIR9SML
Master Data Management Workbench Standard & Advanced Edition
This is the Rational based workbench used to configure and develop MDM solutions.
Part numbers: CIR9TML, CIR9UML, CIR9VML
Rational Application Developer for WebSphere Software V8.5.1
I installed the workbench into Rational Application Developer but you could use Rational Software Architect for WebSphere Software instead. In either case you need at least version 8.5.1, however there is a know
Part numbers: CIE5FML, CIE5GML, CIE5HML, CIE5IML
WebSphere Application Server V184.108.40.206
The minimum version required is 8.5.0 fix pack 2, otherwise the install verification tests will fail. I down
Part numbers: CI6XNML, CI6XPML, CI6XQML
Installing Installation Manager
I ran install.exe to install Installation Manager in GUI mode. After installing Installation Manager you can add the required repositories individually before you run each install, as I did in the video series, or you can add all the repositories in one go as follows.
Create a repository.config file in the directory where you extracted the install images. Copy and paste in this content:
Edit any paths based on the directories you used before saving the file. Now you can add this single repository using the Installation Manager repository preferences and all the packages will show up on the install page.
For more information about Installation Manager, see the Inst
Note: you may have seen a suggestion to alter Installation Manager's agent data location using the cic.appDataLocation configuration setting, however it is not typically necessary, or a good idea, to change this setting.
Installing the workbench
Installing the workbench is straightforward once you've added the Rational Application Developer and workbench repositories to Installation Manager. Pick a suitable install location, for example C:\IBM\SDP, and you can accept the defaults for everything else.
In the MDM
Installing Operational Server prereqs
Before installing the MDM operational server, you need to install DB2 Enterprise Server Edition version 10.1 and WebSphere Application Server 220.127.116.11. In addition, the Installation Startup Toolkit provides the database scripts you'll need to create an MDM database.
You can watch how to run these installs in the MDM
Important: you must install DB2 in a directory called SQLLIB, otherwise the operational server install will not work. For example, I installed DB2 to C:\IBM\SQLLIB
I accepted most of the defaults in the DB2 install wizard, except that I chose not to enable email notifications or operating system security since this is for a development environment.
WebSphere Application Server and Installation Startup Toolkit
Both of these are installed using Installation Manager so I installed them at the same time. (You could even install them at the same time as the workbench to save time.)
Important: you must install fix pack 2 for WebSphere Application Server 8.5 otherwise the MDM install verification tests will fail.
I changed the install locations, to C:\IBM\AppServer and C:\I
Preparing to install the Operational Server
There are several advantages to manually installing a development and test environment, however the biggest disadvantage compared to a typical install is that the installer does not create an MDM database or WebSphere profile for you. Instead, you have to prep
These are the steps I followed, which are covered in the MDM
Edit SQL files
There are a couple of SQL files provided in the startup toolkit for creating an MDM database on DB2:
Both these files contain placeholders which need to be replaced with suitable values before use. These are the values I used:
Notes: Authority will be granted to the user specified by the <DBUSER> value, so this should be different to the user running the scripts. The database name is easy to specify in the installer but here I used the default. The tablespace names need to match the settings used by the installer, and the easiest way to do that for a development environment is to use the values shown above.
The following PowerShell command will fill in the placeholders and I ran it for CreateDB.sql and CreateTS.sql rather than editing the files by hand:
powershell -command "(Get-Content C:\I
After editing the SQL files, I ran them using this command in a DB2 Command Window:
db2 -v -td; -f C:\t
And the same for CreateTS.sql.
Create application server profile
I used the advanced option when creating an application server profile using the Profile Management Tool. I chose not to install the default application, gave the profile a meaningful name and picked the Development tuning setting. Administrative security must be enabled for MDM, and the advantage of creating the profile yourself is that you get to choose the username and password. If you run the Profile Management Tool as administrator, you will also be given the option to run the server process as a Windows process, which isn't necessary for a development environment.
Important: When creating a profile for use with the MDM Workbench, make sure you create it in the default location with a directory name that matches the profile name.
vwilburn 100000F865 Visits (2083)
In Version 11 of InfoSphere MDM, some big changes happened. One change that might leave you scratching your head is the addition of new and changed terms for some familiar components. We also have a couple new components, so those might be unfamiliar too. Let's take a quick walk through the changed terms to get you started.
The first thing that you'll notice is an emphasis on capabilities rather than product names. You might not see these familiar product names anymore:
InfoSphere MDM Server
Initiate Master Data Service (MDS)
Other Initiate product names
Instead, you’ll see references to technical capabilities that those products achieve:
You might be wondering what exactly these technical capability terms mean. You can use virtual, physical, and hybrid MDM to manage your master data, whether you store that data in a distributed fashion, in a centralized repository, or in a combination of both.
The following definitions show the differences and the relationships among the technical capabilities:
The management of master data where master data is created in a distributed fashion on source systems and remains fragmented across those systems with a central "indexing" service.
The management of master data where master data is created in (or loaded into), stored in, and accessed from a central system.
The management of master data where a coexistence implementation style combines physical and virtual technologies.
Server and engine terms
Another new area that you’ll notice is a unified server, which is referred to by one common term:
The former InfoSphere MDM Server and the former Initiate Master Data Service are combined to share a single infrastructure in the application server. That single infrastructure is called the MDM operational server or operational server for short. The operational server is the software that provides services for managing and taking action on master data. The operational server includes the data models, business rules, and functions that support entity management, security, auditing, and event detection. For detailed descriptions and diagrams, see the arch
Records, member records, and entities
Finally, the concepts of entities and records were clarified:
A single unique object in the real world that is being mastered. Examples of an entity are a single person, single product, or single organization.
The storage representation of a row of data.
The representation of the entity as it is stored in individual source systems. Information for each member record is stored as a single record or a group of records across related database tables
Depending on your implementation style, these concepts reflect the technical capabilities of virtual, physical, and hybrid MDM. For example, an entity in virtual MDM is assembled dynamically based on the member records by using linkages and then is stored in the MDM database. Conversely, an entity in physical MDM is based on matching records from the source systems that are merged to form the single entity. For details, see the diag
I’ll leave a discussion of hybrid MDM to a future article. If you’d like to read some conceptual topics about hybrid MDM now, see its technical overview.
Some helpful links:
jaylimburn 2700028UUJ Visits (1683)
Are you attending the IBM IMPACT conference this year?
If you are then be sure to check out the sessions covering MDM and BPM alignment.
The first session hosted by IBM MDM Product Manager Trey Anderson and entitled: Improving Business Processes by Aligning BPM and MDM will cover the value proposition of combing these two technologies and cover a series of easy to obtain business benefits from running a su
Trey, Jay and Allen have been the driving force behind the integrated capabilities now available within IBM BPM and IBM InfoSphere MDM. Take the opportunity to meet with them at IMPACT and discuss your projects and how MDM and BPM alignment can help.
MDM Application Toolkit for Product Domain
I recently had to build a product bundling process for a demo using BPM and the MDM Application Toolkit(MDMAT). Having built many business processes over the past 2 years using data from InfoSphere MDM I realized this was going to be the first one I that I was to build against the product domain of the physical engine. Using the MDMAT against the Party domain is pretty darn easy and very quickly a rich process can be built that interacts with MDM's library of web services for many different types of processes. How useful would it be for me when operating against the Product Domain, especially when a good chunk of my data was stored in Product domain XML soft specs? Well I'm pleased to say it was also very straight forward. I've written some notes below that will hopefully allow others to also find it just as easy to use the MDMAT against the product domain.
The process was to execute a search against the MDM product domain using some pre defined criteria that would allow me to pull back all products that met a certain criteria. in this case it was to retrieve a list of products that were within the 'Mobile Phone' category of the 'Channels' hierarchy, were aimed at a 'Market Segment' that was 'Affluent' had an 'Effective Date' before today's date and an 'Expiry Date' that was after todays date. This would allow me to show currently active offers on the mobile channel for Affluent customers. The 'Market Segment', 'Effective Date' and 'Expiry Date' attributes were all stored as attributes within an XML spec called 'Offer Attributes'. In the search results that come back from MDM I also needed to pull out some additional attributes that were stored within another XML spec called 'Channel Mobile Phone', these attributes were named 'Mob
Whenever I build a business process I first start by defining the variables that I will need. Since BPM applications are data driven, I find it helpful to define the data upfront and then worry about wiring them into a process at a later stage. Using the MDM Workbench I exported my MDM WSDL and imported it into Process Designer. This gives me access to my MDM Product business objects within BPM, allowing me to easily construct a ProductSearchBobj object with the criteria I need to execute my search and also create a Prod
With the objects defined I could move on to define my process flow. I created a very simple flow to suit the requirements as seen below:
I would first use the 'Configure Spec Search Criteria' node to execute a script to populate the ProductSearch object with the crieteria I needed. I would then configure the 'Retrieve all Offers' node to use the MDM Application Toolkits' Physical MDM Txn service to execute a search an return a list of Prod
With my objects defined and my process defined all I had to do was a little bit of scripting to firstly populate my search and then extract my search results to populate my displayObject. (I had already populated my MDMConnection object with my MDM server's credentials and configured the 'Retrieve all Offers' node to use the MDM Application Toolkit's Physical MDM TXn service to call an MDM 'sea
Populating the Search
I wrote a simple script in my 'Configure Spec Search Criteria' object to pass in the search criteria. I wont include the full script here, but all I had to do was create an instance of a ProductSearch object and set the following attributes:
When passed into the 'Retrieve all Offers' node my search criteria successfully results in a list of products that I am interested in being returned as a list of Prod
Extracting the spec values and populating the display object
Up until now everything I had done was pretty similar to other processes I had built, this final piece was the most challenging, in that I had never extracted values from an XML spec before within a business process. Looking at my Prod
With my spec values now populated inside my Prod
This ended up being a bit of a longer blog post then I intended (sorry JT), but hopefully it will provide you a good starter in using the MDMAT for the product domain. I really enjoyed building this process (and writing this article) as it showed me how cool the MDMAT is for helping me to build MDM centric business processes. The ability to build processes against MDM and not worry about the connection and any complexity in calling MDM Web Services saves a huge amount of time and with a little bit of script I was able to leverage the value of MDM's XML specs. if you want more information drop me an email. I'd love to hear what you are doing.
ELizBeth 270005BAKK Visits (2167)
You must have faced quite a good amount of code generation issues if you are working on MDM Server v8 or v8.5. One of the main problems that I have faced was whenever we do not have a hold on the OOTB code generation technique. Say if you need to have OOTB TCRM
Errors logged during code generation
Errors occurred during execution
Error executing tag handler: java
Another problem which we face is, MDM does not support the Transient Object code generation in v8 or 8.5 Hence we have land up with no other option other than to create an Entity, its corresponding classes and will not be persisted. It would be used as a wrapper object. Therefore, your project may have unnecessary files which you may not use in MDM framework.
By this approach it helps the developer to have a strong hold on how your service description should be by writing your own WSDL and generating the java code based on the definition in the WSDL. Definitely, this approach would be challenging as it will not be as simple as clicking the Generate Code in the MDM Model Editor
RAD : 18.104.22.168
MDM : MDM Server v 8.5
WAS : v6.1
Creating Top-Down Web Service
Web services can be created using two methods: top-down development and bottom-up development. Top-down Web services development involves creating a Web service from a WSDL file.
When creating a Web service using a top-down approach, first you design the implementation of the Web service by creating a WSDL file. You can do this using the WSDL Editor. You can then use the Web services wizard to create the Web service and skeleton Java™ classes to which you can add the required code.
Although bottom-up Web service development may be faster and easier, the top-down approach is the recommended way of creating a Web service. By creating the WSDL file first you will ultimately have more control over the Web service, and can eliminate interoperability issues that may arise when creating a Web service using the bottom-up method.
The tools that help to generate the web service artifacts are WSDL2JAVA.bat and JAVA2WSDL.bat.
WSDL2JAVA generates the web service skeletons and the deployment descriptor templates against a WSDL. This is used for the top down approach
JAVA2WSDL generates WSDL from the Java class. This is used for bottom up approach.
This document helps you to create a top to down EJB implementation of Web Service for MDM services. It is quite simple to develop a web service with the help of Web Service editor that is available with the RAD.
By the end of this document, you will be able to create an ejb web service implementation from WSDL to invoke MDM services.
Note: We need to have manual effort to bring up the web service project structure in sync with the classes and the class names that gets generated with the help of MDM model editor.
RAD Preference Settings
Prior to developing the Web Service, you need to set certain Preferences in RAD.
1. Windows > Preferences > Web Services > Resource Management
Note: It is a good practice to select this option when you use utility JAR files or third party libraries, in order to avoid these loadable Java Classes that have to be regenerated.
Below are the steps which explain how to create a top down EJB web service implementation:-
Click Next > Generates the Web Service skeleton from the WSDL and publishes the project to the server
Note:- Start the server before generating the web service
i. Move the SearchBindingImpl to Proj
ii. Rename the below files:-
SearchBindingImpl -> SearchServiceBean
iii. ejb-jar.xml ->
a) Modify the mapping of
ix. If you have defined wrapper object in WSDL to hold any OOTB objects, make sure you create the BObj, Converter and Constructor for the same.
You may have seen the recent tech talks that the team here have been producing for our clients. In these tech talks an IBM expert will talk through a specific MDM topic in great detail sharing the deep expertise of the architects and developers that are living and breathing the technology. These tech talks are provided for free and just require a simple registration process to allow you to attend. All sessions are recorded and replays will be available shortly afterwards.
One area of keen interest to our clients has been concerning the Stewardship and Governance capabilities provided by MDM, specifically the IBM Stewardship Center, that was released in MDM 11.3. So it falls to me to host the next MDM tech talk on June 23rd. In this session I will be discussing the new capabilities offered by the IBM Stewardship Center, how we are changing the game for stewardship teams looking to evolve their organization to be more reactive to data quality events, engaging line of business users to provide input to data quality issues and adding advanced business rules and intelligence to automate events from across the entire data quality landscape.
A one hour tech talk is no where near enough time to do such a broad and important area justice however, we will spend some time up front explaining IBM's perspective on Information Governance and how IBM's InfoSphere portfolio provides the market leading integrated suite of comprehensive governance capabilities that can flex to suit your specific industry requirements. We will dive into the IBM Stewardship Center and its comprehensive workflow engine, providing collaboration and orchestration across the enterprise and touch on the MDM Application Toolkit, a suite of accelerators designed and built by some of our development ninja's to make creating custom governance workflows and quick and easy experience....and if we have time we may even have a live demo of the latest version of the Stewardship Center. During the session the live chat will be open allowing you to ask questions and I will have a team of experts ready to respond in real time.
If your organization is trying to address the growing focus on Information Governance, if you are trying to figure out how to make your Stewardship organization more efficient, or you just wanted to take a look at one of the coolest new features from the MDM team then don't miss the Mast
vwilburn 100000F865 Visits (1848)
Skip the fluff and go deep into the technical details of InfoSphere MDM. In a series we're calling MDM Tech TV, several IBM engineers catch you up on technical topics. These informal video demonstrations give you a quick taste of various features.
The three new videos complement the existing MDM videos:
MDM –WebServices Security enablement and validating request with backend LDAP on WAS
This document is step by step documentation to setup and turn on Global security for InfoSphere MDM:
1. MDM server using LDAP on WAS Enabling Global Security for WAS BASE Edition
Log into the WebSphere admin console
Enabling Global Security for WAS ND Edition
Log into the WebSphere admin console
The port number is the port for that specific profile, server1 for that profile needs
to be started in order to access the admin console
2. Start server and rite click on server, select “Administration”, after that click on “Run administrative console
3. This will start administrative console
4. Click on Security tab and then click on the global security
5. In WAS7.x Click on Security tab in the left hand and then select Global Security under it, at rite hand side click on “Enable administrative security” By default all three security options are selected, deselect the two other options then “Enable administrative security”
6. IN WAS6.x, Click on the “Security -> Secure administration, applications, and infrastructure” then at the rite hand side click on “Standalone the LDAP registry”
7. Select Advanced Lightweight Directory Access Protocol (LDAP) user registry settings under the additional properties options group
8. Configuration of the LDAP details by filling in the required details we can get these from the administrators
9. Save the configuration by clicking on Save
10. Configure the contents taking input from the Administrators as per your client setup
11. Save the configurations by clicking on the save button
12. Once details are filled first check the connection by clicking on the test connection
13. Save the configurations by clicking on the save button
14. If the connection is tested and it is successful we can enable the security but make sure to uncheck the ‘Use java 2 security’ we don’t need this in our configuration
15. Save the configurations.
16. Save changes to master configuration. Restart the server. This will enable the global security in your WAS and it will start expecting the user authorization data name/password
17. The next step is to create the WAS security enabled MDM ear.
By default the security is enabled in the MDM ear, in case it is disabled we can ENABLE it by following the below step
On the RAD console click on ctrl+R this will open window listing all the files containing *.xmi. This will also have file having enable and disabled contents. To enable the security just copy the content in file .xmi
18. Once the security is enabled MDM.ear can be published to test our connection with proper user id and password from SOAP UI
19. The next step is to make our SOAP request changes to accept authentication data (use
20. Download the SOAPUI, and install it.
21. Start SOAPUI and select the option “New Soap UI Project” after clicking on File option
22. Now select the appropriate WSDL, depending on service, for example party related services I have select PartyService.wsdl at “C:\
23. Open appropriate service and in SOAP UI and select Aut tab at the bottom of the request :
24. This will pop up a window where we can enter the details as configured for your LDAP user details and password
25. Rite click on the SOAP request and select “Add WSS Username Token” this will pop up a window where select the “password text option“ this will generate the soap header with security information in it.
26. Fill in the remaining fields in it, it will generate the SOAP request as mentioned below.
27. Test the service with SOAP authentication containing data.
cgriffin 120000CMTR Visits (1576)
With MDM Workbench 9.0.x, you may find that web service deployment classes are not generated for data extensions. This causes runtime errors when invoking web services affected by data extensions, typically a class not found error referring to a class name with suffix _Ser, _Deser, or _Helper. Classes with these names should be generated when you run Prepare for Deployment on WSEJB projects. If these classes are not generated, the web service won't work.
To resolve this error, right-click on PartyWSEJB (you need to repeat this for each affected WSEJB project), select Properties. Select Project Facets. Check the facet: WebSphere EJB (Extended). Save changes, and run Prepare for Deployment on the WSEJB project.
I have added this information to the MDM Workbench FAQ. Thanks to Bark Bakker, for finding the workaround.
If you know of a good solution to a common problem, then please do add it to the MDM Workbench FAQ so that other users can benefit. And if you are having problems, please look at the MDM Workbench FAQ before posting to the MDM Workbench newsgroup, as you may find an answer there.
jtonline 110000B6Y8 Visits (1886)
Before the MDM Developers group got going a few authors from the IBM development team posted on the MDM Workbench blog. Now that this group blog has a few posts as well it makes sense to combine the two, so we won't be posting to the separate MDM Workbench blog in the future.
This blog is for more than just the workbench but the biggest advantage is that it is much easier for anyone to contribute: any member of the group can write a blog post! If you have something to share that you think the community would find useful, give it a try. It's a great way to get early feedback on something that may turn in to a full developerWorks article over time. If you do write a post, just let me know as soon as you are ready for it to be published.
These are just a selection of some of the popular posts from the old blog:
And don't forget, there are still forums available for questions and discussions:
jtonline 110000B6Y8 Visits (1875)
To avoid errors being produced in code generated from module models, the workbench validates the model contents. This post summarises the naming constraints that must be observed in the model to avoid validation errors. This is not intended to be a complete list of constraints but if there are any others that you think are worth being aware of up front, please leave a comment.
The entity name must,
The entity name must not,
Database table name:
The database table name must,
The entity attribute name must,
The entity attribute name must not,
Entity field name:
The entity field name must,
The entity field name must not,
Database field name:The database field name must,
The database field name must not,
The code table name must,
The entity name must not,
Database table name:
The database table name must;
Code Table Attribute
The code table attribute name must,
The code table attribute name must not,
Database field name:
The database field name must,
The database field name must not,
Transient Data Object (TDO)
The TDO name must,
The TDO name must not,
Transient Data Object attribute
The TDO attribute name must,
The TDO attribute name must not,
The transaction name must,
The folder name must,
The folder name must not,
Hub base name:
The hub base name must,
The hub base name must not,
Details on valid Java identifiers can be found in sections 3.8 and 3.9 of the Java language specification however, due to the other naming constraints imposed in the model, the only extra restriction is the use of any of the following reserved words-
The name must not,
Mike Cobbett 11000061J8 Visits (2881)
MDM Workbench v11 is here !
With huge pride, we have just shipped the version eleven of MDM, including the new unified MDM Workbench v11. It's been nearly 2 years in the making, and represents the biggest change to the MDM tooling in recent years. In this article we outline these changes and give the reader familiar with previous MDM tools a gentle introduction to what they can expect when they get their hands on the new tools.
The main changes made for v11 workbench can broadly be categorized under the titles unification, simplification and integration.
Unification is a drive to combine the tools from the v10.1 standard edition (formerly Initiate tools) and the tools from the v10.1 advanced edition into a single set of tools which run in the same Rational Application Developer (RAD) environment. Where the tools were inconsistent, or overlap existed we adopted common approach to make sure both sets of tools work together in a unified tooling environment.
An example of unification: Consistent use of the perspectives, showing the new MDM development perspective.
We want all the tools to be simpler. We aim to cut the time it takes to get value out of the MDM platform; automating where possible to relieve solution developers of repetitive tasks and reducing the amount of knowledge needs to get something working.
Toward this goal the workbench has made these changes :
An example of the way version is simpler can be seen by comparing a version 10.1 workspace against a version 11 workspace:
"No man is an island" as the saying goes, and the same is true for products. MDM tools now play a wider role in enabling the ingestion and distribution of information in an MDM solution.
Enhancements in this area include:
For example: Our list of export wizards has been expanded to help push MDM metadata to more remote systems.
In summary, we hope you like the changes we've made to the tools, and hope you find that creating, configuring and developing an MDM solution is now quicker and easier than ever before.
For more detailed information, and a complete treatment of the MDM version 11 release, please refer to the info
RaymondMari 0600011YW5 Visits (1450)
Requirements for Developer Machine
Developers working with the MIH Workbench require a large software stack. This requirement can
have resource implications for the hardware used by the development team. It is recommended that
each developer's machine meet the following specifications:
One of the following;
· Windows 7
· Windows XP
One of the following;
· IBM Rational Software Architect v7.5.4
· IBM Rational Application Developer v7
· InfoSphere Master Information Hub (MIH) Workbench plugin
· InfoSphere Master Information Hub distribution file MIH9
o VMware workstation v8
o One of the following
When possible, it is recommended that developers use a 64-bit version of Windows
running on a Virtual machine with up to 4GB of memory. MIH Workbench can work
with less powerful hardware, but productivity may be impacted by the demands of the
large software stack.
jaylimburn 2700028UUJ Visits (898)
The team here are pleased to announce that after many nights researching, writing and editing, a new IBM Redbook is due to be published entitled 'Designing and Operating a Data Reservoir'.
The book takes you through the steps an organization should go through when designing and building a data reservoir solution, In this book we base the scenario around a pharmaceutical company, however the discussions, principals and patterns included in the book are relevant for any industry.
A data reservoir provides a platform to share trusted, governed data across an organization. It empowers users to engage in the sharing and reuse of data to ensure that an organization can fully leverage their most important asset. - Data. A data reservoir allows for collection of vast sets of data that can be curated, shaped and monitored to allow advanced analytics to be constructed offering new insights to an organization about their data.
See this blog post for more background on the need for a data reservoir:
The new IBM Redbook, as been authored by thought leaders in the data management space and will be available as a full IBM Redbook publication shortly. In the mean time the draft is available directly from the IBM Redbooks website:
We'd love to hear your feedback on the book and would be keen to hear your stories around data reservoir solutions.
Make Data Work