Welcome to the System z Management Blog, where you can read the perspectives from System z experts. This Blog provides insights into the System z solution, as well as technical details about specific IBM products.
Many systems programmers spend hours debugging problems that involve looping or hung transactions. By working together, z/OS and CICS systems programmers resolve these problems much faster by combining the information available from OMEGAMON XE on z/OS and OMEGAMON XE for CICS on z/OS. A typical scenario is that the z/OS systems programmer identifies an address space with a high (or low) CPU Percent. Most often, this is in response to a situation alert or a reported problem. Starting with the Address Space Overview workspace in OMEGAMON XE on... [More]
IBM has announced the new IBM Tivoli OMEGAMON Performance Management Suite for z/OS V5.1.1. This suite includes performance monitoring tools to lower cost and business risk of managing z/OS and all key subsystems. This single product includes all the OMEGAMONs for z/OS and IBM Tivoli Composite Application Manager for Web Resources. With this suite, one can monitor performance and availability for your IBM z/OS operating system, networks, storage subsystems, IBM DB2, IBM CICS, IBM IMS, IBM WebSphere MQ for z/OS, and IBM WebSphere Application... [More]
This webcast will be held on March 27th, 2014 at 11:00 AM ET-US Overview : Are you being asked to support new technologies like mobile, big data and cloud? Do you have all the analytic information you need to monitor and support new workloads? Much of the data and workloads required for these technologies currently run on System z. Taking advantage of additional analytics can help support those workloads and more easily integrate System z into these new environments, while minimizing disruption of current enterprise workloads. We'll discuss... [More]
The IBM Tivoli OMEGAMON Performance Management Suite for z/OS V5.1.1 documentation is now available on the IBM Knowledge Center Open Beta. Access the Performance Management Suite documentation on the Knowledge Center Open Beta here: https://ibm.biz/BdRSpC For more information about the IBM Knowledge Center Open Beta, see https://ibm.biz/BdRSpL
Hello, Bobby Dixon will be attending Pulse and AOTC this year representing Level 2 support for NetView and System Automation on z/OS. You will find Bobby attending sessions in the Optimizing IT & Service Management Steam and focusing on the System Z Management & Operations Track. This is any session that has a SZM prefix and a focus on Automation on z/OS (NetView, System Automation, and Omegamon). Be sure to say hello if you see him.
IBM Security zSecure Manager for RACF z/VM 1.11.1 originally shipped before z/VM V6R3 was available. If you are planning to upgrade your z/VM release level to z/VM V6R3, take note of the following available maintenance: * PTF UV61210 for APAR VM64434 ships toleration support for z/VM V6R3. Among other things, this prevents message CKV0157 ("Unsupported VM release..."). * PTF UV61204 for APAR VM65404 ships toleration support for the changed response from CP QUERY PATHS due to new function... [More]
You've been storing data collected by OMEGAMON XE on z/OS in the Tivoli Data Warehouse. You can identify problems that occured in the past using the Tivoli Enterprise Portal. You can go learn more and keep your z/OS systems running smoothly by regularly running the following reports on detailed and summarized data: z/OS Status DASD Issues z/OS Status WLM Service Class Period z/OS Utilization Common Storage z/OS Utilization LPAR Summary z/OS Utilization LPAR Usage Summary z/OS Utilization Real Storage Available on... [More]
Deadlocks and timeouts are unresolved contentions in DB2. These unresolved contentions might cause incomplete transactions and might degrade the overall performance of your system. It is important to monitor and resolve these contentions. Tivoli OMEGAMON XE for DB2 Performance Expert on z/OS (OMPE) is invaluable in detecting and analyzing DB2 for z/OS deadlocks and timeouts. The following link takes you to some of IBM's recommended best practices using OMPE to identify where these are occurring then what steps to take to resolve the... [More]
The end-to-end scheduling with z-centric capabilities in two steps STEP1- Define the parameter library for Tws for z/OS In the parameter member of the TWS for z/OS engine add the HTTPOPTS statement in the following way : HTTPOPTS TCPIPJOBNAME('TCPIP') ... [More]
Welcome to the new age of CS&I OMEGAMON Beta programs! We have an exciting new program to offer you... As part of our use of agile development, each beta driver that we make available with the OMEGAMON Performance Management Suite beta will be a near GA-ready solution. This is quite different from the beta programs you have experienced in the past. You might recall that in the "old age" of beta programs, prior to agile development, you would get a beta driver of very early GA development code and quite... [More]
Hello, Bobby DIxon will be representing Level 2 support for NetView and System Automation z/OS at Pulse and AOTC this year in Las Vegas. Bobby will be attending presentations during Pulse for z/os Automation Products (NetView, System Automation and Omegamon), as well as AOTC. Be sure to say hello if you see him!! Thank you, John
The My notifications tool provides support notifications to subscribers with new or updated System support information. Information covers a broad range of materials, including software knowledgebase documents, Preventive Service Planning information (PSPs), Fix information, Security advisories, and more. The My notification tool provides the ability to save notification options and other personal preferences. Follow these easy step-by-step instructions to create your new subscriptions. STEP 1 : To access the tool go to the following... [More]
Activating and configuring Dynamic Critical Path The Dynamic Critical Path feature is entirely managed by the Controller and Daily Plan Batch tasks. There are no other requirements. The only times that you are asked to specify for the (critical) operation are the deadline and the estimated duration times. After that, the feature automatically calculates and adjusts the intermediate times to adhere to the defined times without requiring any further manual intervention. To activate Dynamic Critical Path, leave to YES the CRITJOB keyword of the... [More]
Popular PARMGEN FAQs about base-sharing RTEs: FAQ#1: How do I create a brand new base-sharing RTE (RTE Name=SHRBASEP) in PARMGEN mode? FAQ#2. How do I convert an ICAT Base RTE (RTE Name=BASE1) and an ICAT base-sharing RTE (RTE Name=SHRBASEI) in PARMGEN? ANSWER: PARMGEN streamlined the set-up and deployment of sharing RTEs in general. Creating the shared-to RTE (a Base RTE in this case) and the RTE that shares the Base is a one-step process in PARMGEN mode . In interactive ICAT mode, one would need to: 1. create the ICAT Base RTE... [More]
Check out the OMEGAMON V5 PARMGEN hands-on lab @ Pulse! Don't just read ab out new OMEGAMON V5 capabilities in PARMGEN in our ITM information center. Try it first-hand by checking out the PARMGEN hands-on lab offered @ Pulse on February 23rd - 26th ( http://www.ibm.com/pulse ). Don't miss this excellent opportunity to gain first-hand technical experience with the PARMGEN Lab E03 ( " OMEGAMON/ITM PARMGEN Configuration Tool for the First-Time User (FTU) " ) . In thi s lab session, learn how to quickly configure some... [More]