Here is a tip if you are using ITCAM4Tx with ISM agent and its http/s monitor, with page (url) field longer than 64 characters :
When you configure a HTTP(S) monitor using TEP ISM Configuration GUI, if the page parameter is longer than 64 characters, ISM configuring GUI page accepts it, but in TEP client GUI, the "Page" column is cut to 64 characters.
You may have potentially set your own situations to raise alarms when targeted URL/Page is not available..
And you can forward such ISM alarms to EIF and display them into TIP console. But then in TEP or TIP consoles, the page url info is truncated after 64 characters.
The only area where of the ISM HTTP monitor PAGE attribute is limited to 64 characters is the display output in the TEP.
This is because the ODI table has a limit of 64 characters for the PAGE attribute and ODI columns aren't able to be resized with ITM.
If you are using a ITM situation for example with ISM KIS_HTTP attribute group that is passing the PAGE parameter via EIF slot customization feature, then KIS_HTTP.PAGE attribute is truncated to 64 characters.
a RFE was created earlier for this kind of issue :
RFE 77983 - Increase URL Character length to 512
and this RFE was included in 7401 IF2, as stated in its readme :
The possible solution is to alter the situation in use to send the LONGPAGE attribute rather than the PAGE attribute.
ISM 7401 IF10 supersedes ISM 7401 IF2, see its readme:
When I look on my own Windows TEMS/TEPS system, where ISM 7401 IF10 application support is already installed, in C:\IBM\ITM\CMS\ATTRLIB\kis.atr file, I see :