Technical Blog Post
Abstract
General instructions for using APM in a High Availability mode.
Body
Occasionally, we have customers asking us if APM can be used in HA (High Availability) mode. Generally speaking, this configuration is not supported by APM L2 Support but Dev has come up with a HA PDF file that must be reviewed if you want to use APM in a HA mode. There is limited support for it and this attached PDF provides a brief description of how to upgrade a high availability configuration of APM v8.1.3 to v8.1.4 but should also apply to subsequent minor releases.
This is what is currently publicly available/supported (from Dev) at the time of writing this blog, you can download the PDF and review it here.
https://developer.ibm.com/apm/wp-content/uploads/sites/119/2018/04/APM_High_Availability_V3.pdf
Good luck.
Noel Lewis
ITCAM / APM / ICAM L2 Support team
Subscribe and follow us for all the latest information directly on your social feeds:
|
|
|
Check out all our other posts and updates: | |
Academy Blogs: | https://goo.gl/U7cYYY |
Academy Videos: | https://goo.gl/FE7F59 |
Academy Google+: | https://goo.gl/Kj2mvZ |
Academy Twitter : | https://goo.gl/GsVecH |
UID
ibm11084503