Configuration of ITCAM for AD 7.1 FP04 fails for WAS 85 on z/OS
RayRosales 20000046XT Visits (7299)
If you are trying to configure ITCAM for AD 7.1 FP04 on z/OS with WAS 85 or higher, then more than likely you will run into the following unexpected error-
The*Error* Unsupported version of WAS: 85
Unexpected of course because WAS 85 should be supported at FP4. To answer your unasked question, yes WAS 85 is actually supported at this level despite what the message above is telling you. The problem lies in the setupwas.sh script. There is an APAR opened for this issue APAR PI75311, and the APAR does mention a workaround-
However, this workaround is incomplete. There is another section in the code that needs to be updated. So to get through this issue you will also need change the following in setupwas.sh-
After this change is made you should be able to successfully configure ITCAM for AD 7.1 FP4 with WAS 85.