IBM Copy Services Manager V6.2.3 delivers replication management with simplified and automated replication tasks

IBM United States Software Announcement 218-422
October 2, 2018

Table of contents
OverviewOverviewTechnical informationTechnical information
Key prerequisitesKey prerequisitesOrdering informationOrdering information
Planned availability datePlanned availability dateTerms and conditionsTerms and conditions
DescriptionDescriptionPricesPrices
Program numberProgram numberOrder nowOrder now
PublicationsPublications


At a glance

Top rule

IBM® Copy Services Manager is a replication management solution that delivers central control of your replication environment while helping to simplify and automate complex replication tasks. With Copy Services Manager, you can coordinate copy services on a variety of IBM Storage Systems, including DS8000®, SAN Volume Controller (SVC), Storwize® V7000, and XIV®. You can help prevent errors and increase system continuity using source and target volume matching, site awareness, disaster recovery testing, and standby management. Copy Services Manager V6.2.3 offers the following improvements:

  • Four site support to enable a multitarget Metro Mirror - Global Mirror (MT MM-GM) setup with a cascaded global copy (GC) off of the global mirror (GM) secondary. This supports local high availability while simultaneously copying the data to a remote site and cascading that to a fourth site. The solution is entirely symmetrical so that if you recover to the remote site, you can setup local high availability with a simultaneous copy back to the original site, and a cascaded global copy (GC) to the fourth site.
  • Safeguarded copy support for IBM DS8880.
  • Ability to include multiple years of Copy Services Manager software support when configuring DS8880.
  • Synchronization of z/OS® Host connection certificates automatically between the active and standby servers.
  • Ability to run scheduled tasks through the CLI or with batch jobs.
  • Ability to stagger scheduled tasks defined with an hourly schedule.


Back to topBack to top

Overview

Top rule

Copy Services Manager delivers support for advanced copy services capabilities on DS8000 systems, in addition to the already supported SVC, Storwize V7000, and XIV. This includes automating administration and configuration of these services, operational control (starting, suspending, and resuming) of copy services tasks, and monitoring and managing the copy services sessions.

Copy Services Manager supports Metro Mirror, FlashCopy®, and Global Mirror on the DS8000 and SVC hardware platforms. Advanced disaster recovery functions are also supported with failover/failback (planned and unplanned) from a primary site to a disaster recovery site. Copy Services Manager can also monitor the performance of the copy services that provide a measurement of the amount of replication and the amount of time that is required to complete the replication operations. Copy Services Manager also supports multitarget with practice capability for both Metro Mirror and Global Mirror.

By using Copy Services Manager on IBM DS8000 storage devices, tasks that took up to five steps can be accomplished in just one. The practice session in Copy Services Manager enables you to test your disaster recovery environment without interfering with daily operations, allowing you to run a practice session before you perform the actual action.



Back to topBack to top

Key prerequisites

Top rule

None



Back to topBack to top

Planned availability date

Top rule

October 5, 2018:

  • IBM Copy Services Manager for z Systems® (5698-E01)
  • IBM Copy Services Manager Basic Edition for z Systems (5698-E02)
  • IBM Copy Services Manager (for Passport Advantage®) (5725-Z54)
  • IBM Copy Services Manager License with 1 Year S&S (5641-CSM)

October 9, 2018:

  • IBM Copy Services Manager License with 2 Year S&S (5641-2YR)
  • IBM Copy Services Manager License with 3 Year S&S (5641-3YR)
  • IBM Copy Services Manager License with 4 Year S&S (5641-4YR)
  • IBM Copy Services Manager License with 5 Year S&S (5641-5YR)



Back to topBack to top

Description

Top rule

Copy Services Manager is a replication management solution that delivers central control of your replication environment using simplified and automated replication tasks. With Copy Services Manager, you can coordinate copy services on a variety of IBM Storage products, including DS8000, SVC, Storwize V7000, and XIV. You can also help prevent errors and increase system continuity using source and target volume matching, site awareness, disaster recovery testing, and standby management.

Copy Services Manager reduces the number of steps required for many copy services management activities and has many added benefits over other replication methods. Commands are efficient and easy to understand. An active and a standby server can be set up to enable server redundancy. You can define default port pairings for logical paths on DS8000 Storage systems. Progress reports of the copies within the sessions are available within reports. You can help ensure visibility by setting up recovery point objective (RPO) warnings and severe threshold alerts, and the RPO data can be exported in CSV format for easy analysis.

Safety features are built-in with Copy Services Manager. These features include prompts or warnings before an action is executed, defined user roles to help prevent unapproved actions, volume protection capability, and site awareness to help prevent incorrect hardware relationships.

Copy Services Manager is well-integrated with z Systems, even when running on a distributed systems server. The server function runs in a z/OS address space. You can use FICON® for FICON-attached volumes without a TCP/IP connection when the system mover is present. TCP/IP can be used for volumes without FICON attachment. Hardened freeze support ensures consistency can be maintained for a Metro Mirror session even when there is loss of access to the Copy Services Manager server. The z Systems storage administrator can monitor both mainframe (ECKD™) DASD volumes and nonmainframe (FBA) disk volumes.

Copy Services Manager delivers the ability to manage basic HyperSwap®, Metro Mirror with HyperSwap, or Metro Global Mirror with HyperSwap when all primary and secondary devices are defined to z Systems with available paths. HyperSwap provides continuous availability by handling both planned and unplanned automatic swapping of I/O requests from the primary to secondary site for Metro Mirror pairs. Operator interaction is not required, making this nondisruptive to the application. Copy Services Manager Basic Edition is an entitled version of Copy Services Manager on z Systems providing continuous availability with HyperSwap, without disaster recovery capabilities. Metro Mirror with HyperSwap and Metro Global Mirror with HyperSwap support adds in disaster recovery capabilities along with the high availability of HyperSwap in solutions with two or three sites. Once Copy Services Manager loads the configuration, swap by command or event can be managed directly from z Systems. The same I/O supervisor component handles the actual swap as with GDPS®. This HyperSwap is coordinated across the sysplex and can also be managed through Copy Services Manager from a remote server.

By using Copy Services Manager for management of your copy services, you can help reduce your workload by using less commands and improve safety through precommand execution warnings and user roles. The integration of Copy Services Manager with z Systems and support for Metro Mirror, Global Mirror, and HyperSwap help to ensure your replication is managed in a single place and in an efficient manner.

IBM Copy Services Manager z/OS FlashCopy Manager is a tool to assist in the integration of IBM DS8000 FlashCopy Services into the z/OS batch production environment. z/OS FlashCopy Manager will deliver the tools to discover, document, and autogenerate FlashCopy configurations, and build batch invocation jobs to be included in complex job streams that include other applications of software. You will also be able to control the entire FlashCopy process using standard z/OS job scheduling facilities to accomplish the required set of business objectives.

Section 508 of the US Rehabilitation Act

IBM Copy Services Manager V6.2.3 is capable as of October 5, 2018, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A US Section 508 Accessibility Conformance Statement can be requested on the Product accessibility information website.



Back to topBack to top

Reference information

Top rule

For complete information about IBM Copy Services Manager for z Systems and IBM Copy Services Manager for open systems, see Software Announcement 216-458, dated November 15, 2016.

For complete information about IBM Copy Services Manager on HMC through AAS, see Software Announcement 217-192, dated June 13, 2017.



Back to topBack to top

Program number

Top rule

Program number VRM Program name
5725-Z54 6.2.3 IBM Copy Services Manager (for Passport Advantage)
5698-E01 6.2.3 IBM Copy Services Manager for z Systems V6
5698-E02 6.2.3 IBM Copy Services Manager Basic Edition for z Systems V6
5641-CSM 6.2.3 IBM Copy Services Manager License with 1 Year S&S
5641-2YR 6.2.3 IBM Copy Services Manager License with 2 Year S&S
5641-3YR 6.2.3 IBM Copy Services Manager License with 3 Year S&S
5641-4YR 6.2.3 IBM Copy Services Manager License with 4 Year S&S
5641-5YR 6.2.3 IBM Copy Services Manager License with 5 Year S&S

Product identification number

Program number Subscription and Support PID number
5698-E01 5698-E03
Program number Subscription and Support PID number
5698-E02 5698-E04
Program number
5641-CSM
Program number
5641-2YR
Program number
5641-3YR
Program number
5641-4YR
Program number
5641-5YR

Software Subscription and Support renewals for orders placed using program numbers 5641-CSM, 5641-2YR, 5641-3YR, 5641-4YR, and 5641-5YR are managed in Passport Advantage under the appropriate DSW part number for 5725-Z54.



Back to topBack to top

Business Partner information

Top rule

If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld® ID and password are required (use IBMid).

BP Attachment for Announcement Letter 218-422


Back to topBack to top

Offering Information

Top rule

Product information is available on the IBM Offering Information website.



Back to topBack to top

Publications

Top rule

The following publications can be ordered from the IBM Publications Center

Title Order number
IBM Copy Services Manager User's Guide Version 6.2.3 SC27-8542
IBM Copy Services Manager Installation and Configuration Guide Version 6.2.3 SC27-8543
IBM Copy Services Manager Command-Line Interface User's Guide Version 6.2.3 SC27-8998
IBM Copy Services Manager z/OS FlashCopy Manager User's Guide SC27-8032

The IBM Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. Many publications are available online in various file formats, and they can all be downloaded by all countries.



Back to topBack to top

Services

Top rule

Software Services

IBM Software Services has the breadth, depth, and reach to manage your services needs. You can leverage the deep technical skills of our lab-based, software services team and the business consulting, project management, and infrastructure expertise of our IBM Global Services team. Also, we extend our IBM Software Services reach through IBM Business Partners to provide an extensive portfolio of capabilities. Together, we provide the global reach, intellectual capital, industry insight, and technology leadership to support a wide range of critical business needs.

To learn more about IBM Software Services, contact your Lab Services Sales or Delivery Leader.



Back to topBack to top

Technical information

Top rule

Specified operating environment

Hardware requirements

Product must be installed on a supported server as described in the IBM Copy Services Manager Installation and Configuration Guide Version 6.2.3.

Software requirements

No prerequisites or corequisites.

IBM Electronic Support

The IBM Support Portal is your gateway to technical support. This includes IBM Electronic Support tools and resources, for software and hardware, to help save time and simplify support. The Electronic Support tools can help you find answers to questions, download fixes, troubleshoot, automate data collection, submit and track problems through the Service Request online tool, and build skills. All these tools are made available through your IBM support agreement. Read about the Electronic Support portfolio of tools on the IBM Electronic Support website.

You can also access the IBM Support Portal page and the online Service requests and PMRs tool for more support.

Planning information

Packaging

IBM Copy Services Manager for z Systems

IBM Copy Services Manager Basic Edition for z Systems

These offerings are delivered through the internet through Shopz.

IBM Copy Services Manager for open systems

This offering is delivered as electronic download from Passport Advantage. There is no physical media.

IBM Copy Services Manager for use on IBM DS8880 Series Storage HMC

This offering is delivered preloaded on the DS8880 series storage HMC and may be updated through DFSA for enablement on the DS8000 series HMC. License entitlement and support are ordered through AAS and tracked through Passport Advantage. There is no physical media.

This program, when downloaded from a website, contains the applicable IBM license agreement and License Information, if appropriate, which will be presented for acceptance at the time of installation of the program. For future reference, the license and License Information will be stored in a directory named to include the word license.

Security, auditability, and control

IBM Copy Services Manager uses the security and auditability features of the host hardware.

The client is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communication facilities.



Back to topBack to top

Ordering information

Top rule

Products announced as dual-pipe are available for ordering by program number and feature number or by part number. Products can be obtained by part number through Passport Advantage.

For more information, contact your IBM representative or IBM Business Partner.

Product Group: IBM Systems

Product: IBM Copy Services Manager version 6.2.3 (5725-Z54)

Product Category: IBM Copy Services Manager

Ordering information for Passport Advantage

Passport Advantage (PPA) allows greater flexibility to help customers manage their software licenses and Subscription and Support renewals. Customers can now have a common anniversary date for Subscription and Support renewals for all IBM software, under a PPA agreement, including IBM Storage software. The anniversary date, established at the order ship date for the initial product acquisition, will remain unchanged while their Passport Advantage or Passport Advantage Express® agreement remains in effect.

The quantity to be specified for the Passport Advantage part numbers is per Resource Value Unit (RVU).

RVU

RVU is a unit of measure by which the program can be licensed. RVU Proofs of Entitlement are based on the number of units of a specific resource used or managed by the program. Licensee must obtain sufficient entitlements for the number of RVUs required for licensee's environment for the specific resources as specified in the program specific table. RVU entitlements are specific to the program and the type of resource and may not be exchanged, interchanged, or aggregated with RVU entitlements of another program or resource.

The Resource for RVU calculation for Copy Services Manager is Terabyte, based on number of Terabyte managed at the source. The target Terabyte count for one or more targets does not affect licensing requirements. A Terabyte is 2 to the 40th power bytes, sometimes referred as TiB. Licensee must obtain sufficient entitlements to cover the total number of Terabytes of source data managed by the Program.

RVU conversion table:

From 1 to 12 Resources, 1.00 RVU per Resource
From 13 to 32 Resources, 12 RVUs plus 0.84 RVUs per Resource above 12
From 33 to 64 Resources, 28.8 RVUs plus 0.61 RVUs per Resource above 32
From 65 to 100 Resources, 48.32 RVUs plus 0.46 RVUs per Resource above 64
From 101 to 250 Resources, 64.88 RVUs plus 0.38 RVUs per Resource above 100
For more than 250 Resources, 121.88 RVUs plus 0.30 RVUs per Resource above 250

To order for Passport Advantage, specify the desired part number and quantity.

Program name: IBM Copy Services Manager version 6.2.3 (5725-Z54)

Description Part number
IBM Copy Services Manager Resource Value Units Lic + SW S&S 12 Mo D1M9SLL
IBM Copy Services Manager Resource Value Units Annual SW S&S Rnwl E0MK5LL
IBM Copy Services Manager Resource Value Units SW S&S Reinstate 12 Mo D1M9TLL
IBM Copy Services Manager Resource Value Units MONTHLY LICENSE D1M9MLL
IBM Copy Services Manager Resource Value Units for Linux® on z Systems Lic + SW S&S 12 Mo D1M9ULL
IBM Copy Services Manager Resource Value Units for Linux on z Systems Annual SW S&S Rnwl E0MK6LL
IBM Copy Services Manager Resource Value Units for Linux on z Systems SW S&S Reinstate 12 Mo D1M9VLL
IBM Copy Services Manager Resource Value Units for Linux on z Systems MONTHLY LICENSE D1M9NLL

The products in the above tables are also available by web download from Passport Advantage.

The programs in this announcement all have Value Unit-Based pricing.

Program number Program name Value Unit exhibit
5698-E01 IBM Copy Services Manager for System z® V6 VUE027

For each z Systems IPLA program with Value Unit pricing, the quantity of that program needed to satisfy applicable IBM terms and conditions is referred to as the required license capacity. Your required license capacity is based upon the following factors:

  • The z Systems IPLA program you select.
  • The applicable Value Unit Exhibit.
  • The applicable terms.
  • Whether your current mainframes are full capacity or sub-capacity.
  • The number of terabytes managed at the source. The target terabyte count for one or more targets does not affect licensing requirements.


Value Unit exhibit VUE027

Cumulative usage level Value Units per TB
1 - 12 TB 1 VU/TB
13 - 32 TB 0.8455 VUs/TB
33 - 64 TB 0.6137 VUs/TB
65 - 100 TB 0.4639 VUs/TB
101 - 250 TB 0.3870 VUs/TB
251+ TB 0.3097 VUs/TB


Ordering z/OS through the internet

Shopz provides an easy way to plan and order your z/OS ServerPac or CBPDO. It will analyze your current installation, determine the correct product migration, and present your new configuration based on z/OS. Additional products can also be added to your order (including determination of whether all product requisites are satisfied). For more details and availability, go to the Shopz website.

Product Group: IBM Systems

Product: IBM Copy Services Manager version V6

Product Category: IBM Copy Services Manager

Ordering information for AAS

The quantity to be specified for the AAS Product identifiers is per Resource Value Unit (RVU).

RVU

RVU is a unit of measure by which the program can be licensed. RVU Proofs of Entitlement are based on the number of units of a specific resource used or managed by the program. Licensee must obtain sufficient entitlements for the number of RVUs required for licensee's environment for the specific resources as specified in the program specific table. RVU entitlements are specific to the program and the type of resource and may not be exchanged, interchanged, or aggregated with RVU entitlements of another program or resource.

The Resource for the purpose of RVU calculation for Copy Services Manager is terabyte (TB), based on number of TB managed at the source. The target TB count for one or more targets does not affect licensing requirements. A terabyte is 2 to the 40th power bytes. Licensee must obtain sufficient entitlements to cover the total number of terabytes of source data managed by the Program.

Resource Value Unit Conversion table:

  • From 1 to 12 Resources, 1.00 RVU per Resource
  • From 13 to 32 Resources, 12 RVUs plus 0.84 RVUs per Resource above 12
  • From 33 to 64 Resources, 28.8 RVUs plus 0.61 RVUs per Resource above 32
  • From 65 to 100 Resources, 48.32 RVUs plus 0.46 RVUs per Resource above 64
  • From 101 to 250 Resources, 64.88 RVUs plus 0.38 RVUs per Resource above 100
  • For more than 250 Resources, 121.88 RVUs plus 0.30 RVUs per Resource above 250

Program name: IBM Copy Services Manager Software Maintenance

Program number Feature description One time charge feature number
5641-CSM CSM Lic with 1 Year S&S Per RVU Qty 1 2235
  CSM Lic with 1 Year S&S Per RVU Qty 250 2236

Program number Feature description One time charge feature number
5641-2YR CSM Lic with 2 Year S&S Per RVU Qty 1 2282
  CSM Lic with 2 Year S&S Per RVU Qty 250 2284

Program number Feature description One time charge feature number
5641-3YR CSM Lic with 3 Year S&S Per RVU Qty 1 2280
  CSM Lic with 3 Year S&S Per RVU Qty 250 2285

Program number Feature description One time charge feature number
5641-4YR CSM Lic with 4 Year S&S Per RVU Qty 1 2283
  CSM Lic with 4 Year S&S Per RVU Qty 250 2286

Program number Feature description One time charge feature number
5641-5YR CSM Lic with 5 Year S&S Per RVU Qty 1 2281
  CSM Lic with 5 Year S&S Per RVU Qty 250 2287

Charge metric

Definitions of the charge metrics for these licensed products can be found in the following License Information documents:

Program name PID number Charge metric License Information document number
IBM Copy Services Manager for open systems 5725-Z54 PA per Resource Value Units L-SVGY-B2DRH8
IBM Copy Services Manager for z Systems 5698-E01 ESW per TB Value Units L-SVGY-B2DRCS
IBM Copy Services Manager Basic Edition for z Systems 5698-E02 Per machine L-SVGY-B2DRCS
IBM Copy Services Manager License with 1 Year S&S 5641-CSM Per Resource Value Units L-SVGY-B2DRH8
IBM Copy Services Manager License with 2 Year S&S 5641-2YR Per Resource Value Units L-SVGY-B2DRH8
IBM Copy Services Manager License with 3 Year S&S 5641-3YR Per Resource Value Units L-SVGY-B2DRH8
IBM Copy Services Manager License with 4 Year S&S 5641-4YR Per Resource Value Units L-SVGY-B2DRH8
IBM Copy Services Manager License with 5 Year S&S 5641-5YR Per Resource Value Units L-SVGY-B2DRH8

Select your language of choice and scroll down to the Charge Metrics section.

Basic license

To order, specify the program product number and the appropriate license or charge option. To suppress shipment of media, select the license-only option in CFSW.

Program name: IBM Copy Services Manager for z Systems V6

Program PID: 5698-E01

Entitlement identifier Description License option/Pricing metric
S017SN1 IBM Copy Services Manager for z Systems V6.2.3 Basic OTC, Value Units
  Trade-up from 5698-Z11 IBM Tivoli® Storage Productivity Center for Replication for System z® V6 MultiVersion Measurement No Charge

Orderable supply ID Language
S017SN0 MUL (multi-lingual)


Subscription and Support PID: 5698-E03

Entitlement identifier Description License option/Pricing metric
S017WXT IBM Copy Services Manager for z Systems S&S Basic ASC, per Value Unit SW S&S
    No charge, decline SW S&S
    MultiVersion Measurement S&S No Charge

Orderable supply ID Language
S017WXS MUL (multi-lingual)

Program name: IBM Copy Services Manager Basic Edition for z Systems V6

Program PID: 5698-E02

Entitlement identifier Description License option/Pricing metric
S017WXV IBM Copy Services Manager Basic Edition for z Systems V6.2.3 Basic OTC, Per Machine
    MultiVersion Measurement No Charge

Orderable supply ID Language
S017SN3 MUL (multi-lingual)


Subscription and Support PID: 5698-E04

Entitlement identifier Description License option/Pricing metric
S017WXZ IBM Copy Services Manager Basic Edition for z Systems S&S Basic ASC, per Machine SW S&S
    No charge, decline SW S&S
    MultiVersion Measurement S&S No Charge

Orderable supply ID Language
S017WXX MUL (multi-lingual)

You choose the delivery method when you order the software. IBM recommends internet delivery. However, if you still require physical media, you can choose DVD.

Subscription and support (S&S)

To receive voice technical support via telephone and future releases and versions at no additional charge, Subscription and Support must be ordered. The license includes one year of S&S. S&S renewal in one year increments is automatic unless specifically cancelled. The capacity of S&S (Value Units) must be the same as the capacity ordered for the product licenses. To order, specify the Subscription and Support program number (PID) referenced above and the appropriate license or charge option. This offering:

  • Includes and extends the support services provided in the base sup- port to include technical support via telephone.
  • Entitles you to future releases and versions, at no additional charge. Note that you are not entitled to new products.

When Subscription and Support is ordered, the charges will automatically renew annually unless cancelled by you.

The combined effect of the IPLA license and the Agreement for Acquisition of Software Maintenance gives you rights and support services comparable to those under the traditional ICA S/390® and System z license or its equivalent. To ensure that you continue to enjoy the level of support you are used to in the ICA business model, you must order BOTH the license for the program AND the support for the selected programs at the same Value Unit quantities.

Customized Offerings

Product deliverables are shipped only through CBPDO and ServerPac. These customized offerings are offered for internet delivery. For more details on Internet delivery, go to the Help section on the Shopz website.

You choose the delivery method when you order the software. IBM recommends internet delivery. However, if you still require physical media, you can choose DVD.

Many products can be ordered in ServerPac the month following their availability in CBPDO. z/OS can be ordered through CBPDO and ServerPac at general availability. Many products will also be orderable in a Product ServerPac without also having to order the z/OS operating system or subsystem.

Shopz and CFSW will determine the eligibility based on product requisite checking. For more details on Product ServerPac, go to the Help section on the Shopz website.

Production of software product orders will begin on the planned general availability date.

  • CBPDO shipments will begin one week after general availability.
  • ServerPac shipments will begin four weeks after general availability.



Back to topBack to top

Terms and conditions

Top rule

The information provided in this announcement letter is for reference and convenience purposes only. The terms and conditions that govern any transaction with IBM are contained in the applicable contract documents such as the IBM International Program License Agreement, IBM International Passport Advantage Agreement, and the IBM Agreement for Acquisition of Software Maintenance.

Licensing

IBM International Program License Agreement including the License Information document and Proof of Entitlement (PoE) govern your use of the program. PoEs are required for all authorized use. Part number products only, offered outside of Passport Advantage, where applicable, are license only and do not include Software Maintenance.

This software license includes Software Subscription and Support (also referred to as Software Maintenance).

Software Maintenance

The following agreement applies for Software Subscription and Support (Software Maintenance) and does not require client signatures:

  • IBM Agreement for Acquisition of Software Maintenance (Z125-6011)

These programs are licensed under the IBM Program License Agreement (IPLA) and the associated Agreement for Acquisition of Software Maintenance, which provide for support with ongoing access to releases and versions of the program. These programs have a one-time license charge for use of the program and an annual renewable charge for the enhanced support that includes telephone assistance (voice support for defects during normal business hours), as well as access to updates, releases, and versions of the program as long as support is in effect. IBM z Systems® Operational Support Services - SoftwareXcel is an option if you desire added services.

License Information number

The following License Information documents apply to the offerings in this announcement:

Program identifier License Information document title License Information document number
5725-Z54 IBM Copy Services Manager (for Passport Advantage) L-SVGY-B2DRH8
5698-E01 IBM Copy Services Manager for z Systems V6 L-SVGY-B2DRCS
5698-E02 IBM Copy Services Manager Basic Edition for z Systems V6 L-SVGY-B2DRCS
5641-CSM IBM Copy Services Manager License with 1 Year S&S L-SVGY-B2DRH8
5641-2YR IBM Copy Services Manager License with 2 Year S&S L-SVGY-B2DRH8
5641-3YR IBM Copy Services Manager License with 3 Year S&S L-SVGY-B2DRH8
5641-4YR IBM Copy Services Manager License with 4 Year S&S L-SVGY-B2DRH8
5641-5YR IBM Copy Services Manager License with 5 Year S&S L-SVGY-B2DRH8

Select your language of choice and scroll down to the Charge Metrics section. Follow-on releases, if any, may have updated terms. See the License Information documents website for more information.

Limited warranty applies

Yes

Limited warranty

IBM warrants that when the program is used in the specified operating environment, it will conform to its specifications. The warranty applies only to the unmodified portion of the program. IBM does not warrant uninterrupted or error-free operation of the program or that IBM will correct all program defects. You are responsible for the results obtained from the use of the program.

IBM provides you with access to IBM databases containing information on known program defects, defect corrections, restrictions, and bypasses at no additional charge. For further information, see the IBM Software Support Handbook.

IBM will maintain this information for at least one year after the original licensee acquires the program (warranty period).

Program technical support

Technical support of a program product version or release will be available for a minimum of three years from the general availability date, as long as your Software Subscription and Support (also referred to as Software Maintenance) is in effect.

This technical support allows you to obtain assistance (by telephone or electronic means) from IBM for product-specific, task-oriented questions regarding the installation and operation of the program product. Software Subscription and Support (Software Maintenance) also provides you with access to updates (modifications or fixes), releases, and versions of the program. You will be notified, through an announcement letter, of discontinuance of support with 12 months' notice. If you require additional technical support from IBM, including an extension of support beyond the discontinuance date, contact your IBM representative or IBM Business Partner. This extension may be available for a fee.

For additional information on the IBM Software Support Lifecycle Policy, see the IBM Software Support Lifecycle Policy website.

Money-back guarantee

If for any reason you are dissatisfied with the program and you are the original licensee, you may obtain a refund of the amount you paid for it, if within 30 days of your invoice date you return the program and its PoE to the party from whom you obtained it. If you downloaded the program, you may contact the party from whom you acquired it for instructions on how to obtain the refund.

For clarification, note that (1) for programs acquired under the IBM International Passport Advantage offering, this term applies only to your first acquisition of the program and (2) for programs acquired under any of IBM's On/Off Capacity on Demand (On/Off CoD) software offerings, this term does not apply since these offerings apply to programs already acquired and in use by you.

Volume orders (IVO)

No

Passport Advantage applies

Yes, information is available on the Passport Advantage and Passport Advantage Express® website.

Software Subscription and Support applies

Yes. Software Subscription and Support, also referred to as Software Maintenance, is now included in the Passport Advantage Agreement. Installation and technical support for the products announced in this announcement is provided by the Software Subscription and Support offering of the IBM International Passport Advantage Agreement. This fee service enhances client productivity by providing voice or electronic access into the IBM support organizations.

IBM includes one year of Software Subscription and Support with the initial license acquisition of each program acquired through Passport Advantage. The initial period of Software Subscription and Support can be extended by the purchase of a renewal option.

While your Software Subscription and Support is in effect, IBM provides you assistance for your routine, short duration installation and usage (how-to) questions, and code-related questions. IBM provides assistance by telephone and, if available, electronic access, only to your information systems (IS) technical support personnel during the normal business hours (published prime shift hours) of your IBM support center. (This assistance is not available to your users.) IBM provides Severity 1 assistance 24 hours a day, every day of the year. For additional details, see the IBM Software Support Handbook. Software Subscription and Support does not include assistance for the design and development of applications, your use of programs in other than their specified operating environment, or failures caused by products for which IBM is not responsible under this agreement.

For additional information about the Passport Advantage Agreement, go to the Passport Advantage and Passport Advantage Express website.

All distributed software licenses include Software Subscription and Support for a period of 12 months from the date of acquisition, providing a streamlined way to acquire IBM software and assure technical support coverage for all licenses.

Variable charges apply

No

Educational allowance available

Not applicable.

Multi-Version Measurement

Multi-Version Measurement (MVM) replaces the previously announced Migration Grace Period time limit of six months and allows unlimited time for clients to run more than one eligible version of a software program. Clients may run multiple versions of a program simultaneously for an unlimited duration during a program version upgrade. Clients may also choose to run multiple versions of a program simultaneously for an unlimited duration in a production environment. MVM does not extend support dates for programs withdrawn from service.

For more information about MVM, including requirements for qualification, see the MVM web page. For a list of eligible programs, see the IPLA Execution-Based web page.



Back to topBack to top

Statement of good security practices

Top rule

IT system security involves protecting systems and information through intrusion prevention, detection, and response to improper access from within and outside your enterprise. Improper access can result in information being altered, destroyed, or misappropriated or can result in misuse of your systems to attack others. Without a comprehensive approach to security, no IT system or product should be considered completely secure and no single product or security measure can be completely effective in preventing improper access. IBM systems and products are designed to be part of a regulatory compliant, comprehensive security approach, which will necessarily involve additional operational procedures, and may require other systems, products, or services to be most effective.

Important: IBM does not warrant that any systems, products, or services are immune from, or will make your enterprise immune from, the malicious or illegal conduct of any party.



Back to topBack to top

Prices

Top rule


Business Partner information

If you are an IBM Business Partner acquiring products from IBM, you may link to Passport Advantage Online for resellers where you can obtain Business Partner pricing information. An IBMid and password are required to access the IBM Passport Advantage website.


Passport Advantage

For Passport Advantage information and charges, contact your IBM representative. Additional information is also available on the Passport Advantage and Passport Advantage Express website.

Advanced Administration System (AAS)

Information on charges is available on the IBM Support Portal website. Choose the option entitled Purchase/upgrade tools.

Program name: IBM Copy Services Manager 2 Year Software S&S

Program number Feature description Feature number
5641-CSM CSM Lic with 1 Year S&S Per RVU Qty 1 2235
  CSM Lic with 1 Year S&S Per RVU Qty 250 2236

Program name: IBM Copy Services Manager 2 Year Software S&S

Program number Feature description Feature number
5641-2YR CSM Lic with 2 Year S&S Per RVU Qty 1 2282
  CSM Lic with 2 Year S&S Per RVU Qty 250 2284

Program name: IBM Copy Services Manager 3 Year Software S&S

Program number Feature description Feature number
5641-3YR CSM Lic with 3 Year S&S Per RVU Qty 1 2280
  CSM Lic with 3 Year S&S Per RVU Qty 250 2285

Program name: IBM Copy Services Manager 4 Year Software S&S

Program number Feature description Feature number
5641-4YR CSM Lic with 4 Year S&S Per RVU Qty 1 2283
  CSM Lic with 4 Year S&S Per RVU Qty 250 2286

Program name: IBM Copy Services Manager 5 Year Software S&S

Program number Feature description Feature number
5641-5YR CSM Lic with 5 Year S&S Per RVU Qty 1 2281
  CSM Lic with 5 Year S&S Per RVU Qty 250 2287



Back to topBack to top

Order now

Top rule

To order, contact the IBM Digital Sales Center, your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968). For more information, contact the IBM Digital Sales Center.

Phone: 800-IBM-CALL (426-2255)

Fax: 800-2IBM-FAX (242-6329)

For IBM representative: askibm@ca.ibm.com

For IBM Business Partner: pwcs@us.ibm.com

IBM Digital Sales Offices
1177 S Belt Line Rd
Coppell, TX 75019-4642, US

The IBM Digital Sales Center, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.


Note: Shipments will begin after the planned availability date.

Trademarks

ECKD is a trademark of IBM Corporation in the United States, other countries, or both.

IBM, DS8000, Storwize, XIV, z/OS, FlashCopy, z Systems, Passport Advantage, PartnerWorld, Express, FICON, HyperSwap, GDPS, System z, Tivoli, S/390 and IBM z Systems are registered trademarks of IBM Corporation in the United States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at

Terms of use

For the most current information regarding IBM products, consult your IBM representative or reseller, or go to the IBM worldwide contacts page

IBM United States