IBM Power Systems delivers new Hardware Management Console for IBM POWER technology-based servers

IBM United States Hardware Announcement 121-001
April 13, 2021

Table of contents
OverviewOverviewPublicationsPublications
Key requirementsKey requirementsTechnical informationTechnical information
Planned availability datePlanned availability dateTerms and conditionsTerms and conditions
DescriptionDescriptionPricesPrices
Product numberProduct number


(Corrected on September 21, 2021)

Modification made to AP distribution section.



At a glance

Top rule

The IBM® Power® Systems Hardware Management Console (HMC), based on POWER® technology, is a dedicated-function device used solely for the control and service functions of IBM Power Systems servers. It is designed to deliver management support for Power servers using IBM POWER7, IBM POWER8®, or IBM POWER9™ technology-based processors.

The HMC has the following standard hardware attributes:

  • 1U base configuration
  • POWER9 130W 6c CPU
  • 64 GB (4 x 16 GB) or 128 GB (4 x 32 GB) of DDR4 system memory
  • 2 x 1.8 TB SAS SFF 2.5-inch hard disk drive (HDD) RAID 1
  • Rail bracket option for round-hole rack mounts
  • Two USB 3.0 hub ports in the front of the server (option to remove)
  • Two USB 3.0 hub ports in the rear of the server
  • Redundant 900W power supplies
  • 4 x 1 Gb Ethernet ports
  • 2 x 10 Gb Ethernet Ports on optional PCI adapter
  • 1 x 1 Gb baseboard management controller (BMC) Ethernet port


Back to topBack to top

Overview

Top rule

The Power HMC (7063-CR2) is a dedicated rack-mounted workstation that helps you to configure and manage system resources on Power servers using POWER7, POWER8, or POWER9 technology-based processors. The HMC connects to one or more managed systems to perform the following primary functions:

  • Provide a console for system administrators and service providers to manage server hardware
  • Deliver basic virtualization management through support for configuring logical partitions (LPARs) and dynamic resource allocation, including processor and memory settings
  • Detect, report, and store changes in hardware conditions
  • Act as a service focal point for service providers to determine an appropriate service strategy
  • Display operating system session terminals for each partition
  • Provide the call home focal point for managed servers
  • Display ASMI menus for managed servers

The HMC also supports advanced service functions, including guided repair and verify, concurrent firmware updates for managed systems, and around-the-clock error reporting with Electronic Service Agent for faster support.

The HMC is delivered with its machine code preinstalled on the HDD. After the HMC is installed and connected to a managed system, you can perform system management tasks.

The HMC machine code does not have provisions for loading or running additional applications that are not related to hardware management or service. All of the tasks needed to maintain the managed system, the underlying operating system, and the HMC machine code are available by using the HMC management interface.

IBM offers integration of the Power HMC into racks before shipping.

Note: IBM also offers the Power Systems virtual HMC (vHMC) as a software-based alternative to the HMC appliance. The vHMC software is delivered in the form of a prebuilt virtual machine (VM) that can be downloaded and deployed on IBM PowerVM® or various x86 virtualization platforms. The vHMC software is updated in alignment with updates to the HMC appliance.

Due to client demand, HMC V9.2 code is now available for 7042-CR9 HMC. HMC V9.2 will be the last supported HMC code release for 7042-CR9. POWER9 servers with 950 firmware (FW950) or later, if managed by an HMC, require either the x86-based HMC, 7042-CR9, POWER-based HMC, 7063-CR1 or later; or the HMC Virtual Appliance, 5765-HMW (x86 based), or 5765-HMB (POWER based) or later. For additional information, see the HMC Support Matrix.



Back to topBack to top

Feature exchange

Top rule

Not applicable



Back to topBack to top

Key requirements

Top rule

See the Hardware requirements and Software requirements section for details.



Back to topBack to top

Planned availability date

Top rule

May 21, 2021



Back to topBack to top

Description

Top rule

Section 508 of the US Rehabilitation Act

Hardware Management Console is capable as of May 21, 2021, when used in accordance with associated IBM documentation, of satisfying the applicable standards, including the Worldwide Consortium Web Content Accessibility Guidelines, European Standard EN 301 349, and US Section 508, provided that any assistive technology used with the product properly interoperates with it. An Accessibility Conformance Statement can be requested on the Product accessibility information website.



Back to topBack to top

Product number

Top rule

The following are newly announced features on the specific models of the IBM Power Systems 7063 machine type:

                                                  Machine  Model   Feature
Description                                       type     number  number
Hardware Management Console                       7063     CR2          
 



EMEA Bulk MES Indicator                           7063     CR2     0004 

 

Hardware Management Console License for CR2       7063     CR2     0964 
Rack Indicator, Rack #1                           7063     CR2     4651 
Rack Indicator, Rack #2                           7063     CR2     4652 
Rack Indicator, Rack #3                           7063     CR2     4653 
Rack Indicator, Rack #4                           7063     CR2     4654 
Rack Indicator, Rack #5                           7063     CR2     4655 
Rack Indicator, Rack #6                           7063     CR2     4656 
Rack Indicator, Rack #7                           7063     CR2     4657 
Rack Indicator, Rack #8                           7063     CR2     4658 
Rack Indicator, Rack #9                           7063     CR2     4659 
Rack Indicator, Rack #10                          7063     CR2     4660 
Rack Indicator, Rack #11                          7063     CR2     4661 
Rack Indicator, Rack #12                          7063     CR2     4662 
Rack Indicator, Rack #13                          7063     CR2     4663 
Rack Indicator, Rack #14                          7063     CR2     4664 
Rack Indicator, Rack #15                          7063     CR2     4665 
Rack Indicator, Rack #16                          7063     CR2     4666 
Power Cord 4.3m (14-ft), Drawer to IBM PDU (250V/
10A)                                              7063     CR2     6458 
Power Cord 4.3m (14-ft), Drawer To OEM PDU 
(125V, 15A)                                       7063     CR2     6460 
Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU
(250V/15A) U. S.                                  7063     CR2     6469 
Power Cord 1.8m (6-ft), Drawer to Wall (125V/15A) 7063     CR2     6470 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU
(250V/10A)                                        7063     CR2     6471 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU
(250V/16A)                                        7063     CR2     6472 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU
(250V/10A)                                        7063     CR2     6473 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/13A)                                        7063     CR2     6474 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/16A)                                        7063     CR2     6475 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/10A)                                        7063     CR2     6476 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/16A)                                        7063     CR2     6477 
Power Cord 2.7 M(9-foot), To Wall/OEM PDU,
(250V, 16A)                                       7063     CR2     6478 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(125V/15A or 250V/10A )                           7063     CR2     6488 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/10A)                                        7063     CR2     6493 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/10A)                                        7063     CR2     6494 
Power Cord 2.7M (9-foot), To Wall/OEM PDU,
(250V, 10A)                                       7063     CR2     6496 
Power Cable - Drawer to IBM PDU, 200-240V/10A     7063     CR2     6577 
Power Cord 2.7M (9-foot), To Wall/OEM PDU,
(125V, 15A)                                       7063     CR2     6651 
Power Cord 2.7M (9-foot), To Wall/OEM PDU,
(250V, 15A)                                       7063     CR2     6659 
Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU
(125V/15A)                                        7063     CR2     6660 
Power Cord 2.8m (9.2-ft), Drawer to IBM PDU,
(250V/10A)                                        7063     CR2     6665 
Power Cord 4.3M (14-foot), Drawer to OEM PDU,
(250V, 15A)                                       7063     CR2     6669 
Power Cord 2.7M (9-foot), Drawer to IBM PDU,
250V/10A                                          7063     CR2     6671 
Power Cord 2M (6.5-foot), Drawer to IBM PDU,
250V/10A                                          7063     CR2     6672 
Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU,
(250V/10A)                                        7063     CR2     6680 
AC Power Supply - 900W                            7063     CR2     EB2L 
RAID1 Enabled                                     7063     CR2     EB2T 
Front of Panel without USB ports                  7063     CR2     EBZ0 
Front of Panel with 2x USB ports                  7063     CR2     EBZ1 
Front of Panel without USB ports - OEM            7063     CR2     EBZ2 
Front of Panel with 2x USB ports - OEM            7063     CR2     EBZ3 
1.8 TB 10K RPM 4K SAS HDD SFF                     7063     CR2     EHMD 
Power Cable - Drawer to IBM PDU (250V/10A)        7063     CR2     ELC5 
16 GB DDR4 Memory                                 7063     CR2     EM62 
32 GB DDR4 Memory                                 7063     CR2     EM63 
PCIe2 2-port 10/1GbE BaseT RJ45 Adapter           7063     CR2     EN0W 


6-core 3.0 GHz POWER9 Processor                   7063     CR2     EP75 
Fixed Length Rail Kit for 7063-CR2                7063     CR2     ERK0 
Adjustable Length Rail Kit for 7063-CR2           7063     CR2     ERK1 

The following are features already announced for the IBM Power Systems 7063 machine type:

                                                  Machine  Model   Feature
Description                                       type     number  number

One CSC Billing Unit                              7063     CR2     0010 
Ten CSC Billing Units                             7063     CR2     0011 
 



US TAA Compliance Indicator                       7063     CR2     0983 







Product assembled in USA manufacturing plant      7063     CR2     0984 

 

Custom Service Specify, Rochester Minn, USA       7063     CR2     1140 
One and only one rack indicator feature is required on
all orders (#4650 to #4666).
Rack Indicator- Not Factory Integrated            7063     CR2     4650 
HMC/Server Order Linkage Indicator                7063     CR2     9069 
Order Routing Indicator- System Plant             7063     CR2     9169 
Language Group Specify - US English               7063     CR2     9300 
Month Indicator                                   7063     CR2     9461 
Day Indicator                                     7063     CR2     9462 
Hour Indicator                                    7063     CR2     9463 
Minute Indicator                                  7063     CR2     9464 
Qty Indicator                                     7063     CR2     9465 
Countable Member Indicator                        7063     CR2     9466 
Language Group Specify - Dutch                    7063     CR2     9700 
Language Group Specify - French                   7063     CR2     9703 
Language Group Specify - German                   7063     CR2     9704 
Language Group Specify - Polish                   7063     CR2     9705 
Language Group Specify - Norwegian                7063     CR2     9706 
Language Group Specify - Portuguese               7063     CR2     9707 
Language Group Specify - Spanish                  7063     CR2     9708 
Language Group Specify - Italian                  7063     CR2     9711 
Language Group Specify - Canadian French          7063     CR2     9712 
Language Group Specify - Japanese                 7063     CR2     9714 
Language Group Specify - Traditional Chinese  
(Taiwan)                                          7063     CR2     9715 
Language Group Specify - Korean                   7063     CR2     9716 
Language Group Specify - Turkish                  7063     CR2     9718 
Language Group Specify - Hungarian                7063     CR2     9719 
Language Group Specify - Slovakian                7063     CR2     9720 
Language Group Specify - Russian                  7063     CR2     9721 
Language Group Specify - Simplified Chinese (PRC) 7063     CR2     9722 
Language Group Specify - Czech                    7063     CR2     9724 
Language Group Specify - Romanian                 7063     CR2     9725 
Language Group Specify - Croatian                 7063     CR2     9726 
Language Group Specify - Slovenian                7063     CR2     9727 
Language Group Specify - Brazilian Portuguese     7063     CR2     9728 
Language Group Specify - Thai                     7063     CR2     9729 
SP Warranty and Maintenance 5Y 24x7 Same Day ORT  7063     CR2     B0LP 
SP Hard Drive/Media Retention - Power 5 years     7063     CR2     B0PR 
ServicePac® for Basic Selection for Power 5 years 7063     CR2     B0SR 
SP WAMO 3Y 24x7 SD                                7063     CR2     B0UW 


SP HDR/MR POWER 3Y                                7063     CR2     B0VH 
Custom Service Specify, Mexico                    7063     CR2     ECSM 
Custom Service Specify, Poughkeepsie, USA         7063     CR2     ECSP 
IBM Power Private Cloud Rack Solution Indicator   7063     CR2     ELG2 
S&H - No Charge                                   7063     CR2     ESC0 
S&H-a                                             7063     CR2     ESC5 

The following are newly announced features on the specific models of the IBM Power Systems 7014 and 7965 machine type:

Planned Availability Date May 21, 2021

New Feature

                                                  Machine  Model   Feature
Description                                       type     number  number

Rack Content Specify 7063-CR2                     7014     T00     ERCN 
                                                  7014     T42          
                                                  7965     S42          



Back to topBack to top

Business Partner information

Top rule

If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBMid).

BP Attachment for Announcement Letter 121-001


Back to topBack to top

Publications

Top rule

No publications are shipped with the announced products.

To access the IBM Publications Center Portal, go to the IBM Publications Center website.

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. A large number of publications are available online in various file formats, which can currently be downloaded.



Back to topBack to top

Services

Top rule

IBM Systems Lab Services

IBM Systems Lab Services offers a wide array of services available for your enterprise. It brings expertise on the latest technologies from the IBM development community and can help with your most difficult technical challenges.

IBM Systems Lab Services exists to help you successfully implement emerging technologies so as to accelerate your return on investment and improve your satisfaction with your IBM systems and solutions. Services examples include initial implementation, integration, migration, and skills transfer on IBM systems solution capabilities and recommended practices. IBM Systems Lab Services is one of the service organizations of IBM's world-renowned IBM Systems Group development labs.

For details on available services, contact your IBM representative or go to the IBM Systems Lab Services website.

Global Technology Services

IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.

These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an on-demand business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.

For details on available services, contact your IBM representative or go to the IBM Global Technology Services® website.

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or go to the Resiliency Services website.

Details on education offerings related to specific products can be found on the IBM Skills Gateway website.



Back to topBack to top

Technical information

Top rule

Specified operating environment

Physical specifications
    • Width: 434.10 mm (17.1 in.)
    • Depth: 726.76 mm (28.6 in.)
    • Height: 43.71 mm (1.7 in.)
    • Weight: 17.6 kg (38.8 lb)

    To assure installability and serviceability in non-IBM industry-standard racks, review the installation planning information for any product-specific installation requirements.

Operating environment

For some standards and guidelines about the operating environment, see the ASHRAE-A2 website.

Hardware requirements

The IBM Power Systems HMC requires a minimum HMC code level V9R2M950. This code level restricts the CR2 model to management of POWER7, POWER8, or POWER9 servers. If you need redundant HMC function, the servers can be attached to two separate HMCs to address availability requirements. All HMCs must have the same level of HMC Licensed Machine Code installed.

Management of multiple servers from an HMC might require the use of an Ethernet hub, which provides a physical connection from the HMC to each server rather than a logical Ethernet connection over a LAN.

IBM Knowledge Center provides information about classic and enhanced GUIs for configuring and operating single or multiple managed systems.

Software requirements

The following web browsers are supported for connection with the HMC Licensed Machine Code V9R2M950:

  • Microsoft™ Internet Explorer 1082.18362.0.
  • Firefox (version 82.0.1 (64-bit).
  • Chrome 86.0.4240.111 (Official Build) (64-bit) and Java™ 8 Runtime Environment are supported.
  • Safari (versions 14.0 and 12.0.5)

The following web browsers are supported for connection with the OpenPower BMC:

  • Chrome version 60
  • Firefox version 52.1.2
  • Microsoft Internet Explorer version 11
  • Safari version 10.1.2

Limitations
  • The HMC is a dedicated-function device used only for the control and service functions of the Power servers. It is not available for use as a general purpose computing resource.
  • The HMC requires a minimum HMC code level. This code level restricts the HMC to management of POWER7, POWER8, or POWER9 servers.

Integrated repair and verify for CRUs is available at this time in English only. Clients who want access to the translated services guides will be directed to an external website from their HMC.

If additional assistance is required with interpreting English repair and verify:

  • Contact the IBM Hardware Support Center (using the method you would normally use to obtain support for your hardware), and ask for Hardware Support. Be sure to have your HMC machine type and serial number available. Indicate that you have problems with translated repair and verify.
  • An IBM Service Support Representative (SSR) may be dispatched to your site to assist with your repair and verify activity.
  • The HMC and attached servers may not be accessible to you while the SSR is working.

Planning information

Cable orders

Additional Ethernet cables are required to attach the HMC to the system central electronics complex. These cables are customer supplied.

An additional Ethernet cable is required for remote management. The cable connects to the baseboard management controller (BMC).

Security, auditability, and control

This product uses the security and auditability features of the server operating system.

The client is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.

IBM Systems Lab Services

For details on available services, contact your IBM representative or go to the IBM Systems Lab Services website.



Back to topBack to top

Terms and conditions

Top rule

Volume orders

Contact your IBM representative.

IBM Global Financing

Yes

Products - terms and conditions

Warranty period
Warranty and Additional Coverage Options: Coverage Summary:(1)

Warranty Period:

Service Level:

1 year

IBM On-Site Limited, 9x5 Next Business Day (1)

Service Upgrade Options:  
Warranty Service Upgrade IBM On-Site Repair, 9x5 Same Day (2) and 24x7 Same Day options
Maintenance Services (Post-Warranty): IBM On-Site Repair, Next Business Day and Same Day options
IBM Hardware Maintenance Services - committed maintenance: (3) Y
(1) Known exception: China and Turkey.
Warranty for China is 1 Year CRU ONLY 9X5 NBD.
Warranty for Turkey is 2 Years CRU and On-site 9X5 NBD.
(2) offered in US and EMEA only.
(3) not offered in the US.

One year

To obtain copies of the IBM Statement of Limited Warranty, contact your reseller or IBM. An IBM part or feature installed during the initial installation of an IBM machine is subject to the full warranty period specified by IBM. An IBM part or feature that replaces a previously installed part or feature assumes the remainder of the warranty period for the replaced part or feature. An IBM part or feature added to a machine without replacing a previously installed part or feature is subject to a full warranty. Unless specified otherwise, the warranty period, type of warranty service, and service level of a part or feature are the same as those for the machine in which it is installed.

Warranty service

If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically through an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM. You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines on-site service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts. If applicable to your product, parts considered Client Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service.

Service levels are response-time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country-specific and location-specific information.

CRU Service

IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 (mandatory) or a Tier 2 (optional) CRU.

Tier 1 (mandatory) CRU

Installation of Tier 1 CRUs, as specified in this announcement, is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

Tier 2 (optional) CRU

You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.

Based upon availability, CRUs will be shipped for next business day (NBD) delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU. You may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

The following parts have been designated as Tier 1 CRUs:

  • TOD 3.0V Lithium
  • Fans
  • TPM Card
  • AC Power Supply
  • Disk
  • Memory
  • Processor
  • Adapter
  • Power Cords
  • Rails
CRU and On-site Service

At IBM's discretion, you will receive specified CRU service, or IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.

Service level is:

  • 9 hours per day, Monday through Friday, excluding holidays, next business day response. Calls must be received by 5:00 PM local time in order to qualify for next business day response.


Non-IBM parts service

Warranty service

IBM is now shipping machines with selected non-IBM parts that contain an IBM field replaceable unit (FRU) part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to their clients, and normal warranty service procedures for the IBM machine apply.

International Warranty Service

International Warranty Service allows you to relocate any machine that is eligible for International Warranty Service and receive continued warranty service in any country where the IBM machine is serviced. If you move your machine to a different country, you are required to report the machine information to your Business Partner or IBM representative.

The warranty service type and the service level provided in the servicing country may be different from that provided in the country in which the machine was purchased. Warranty service will be provided with the prevailing warranty service type and service level available for the eligible machine type in the servicing country, and the warranty period observed will be that of the country in which the machine was purchased.

The following types of information can be found on the International Warranty Service website

  • Machine warranty entitlement and eligibility
  • Directory of contacts by country with technical support contact information
  • Announcement Letters
Warranty service upgrades

During the warranty period, warranty service upgrades provide an enhanced level of On-site Service for an additional charge. Service levels are response-time objectives and are not guaranteed. See the Warranty services section for additional details.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM. You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines on-site service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts.

  • On-Site Repair, Monday through Friday (excluding holidays), 8am to 5pm, 4 hour on-site response objective. Response times are objectives and are not guaranteed.
  • On-Site Repair, 7 days a week, 24hrs/day
  • On-Site Repair, 7 days a week, 24hrs/day, 2 hour response objective. Response times are objectives and are not guaranteed.
Maintenance service options
CRU and On-site Service

At IBM's discretion you will receive CRU service or IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following on-site response-time objectives are available as warranty service upgrades for your machine. Available offerings are:

  • 9 hours per day, Monday through Friday, excluding holidays, same business day response
  • 24 hours per day, 7 days a week, 4 hour average response, same day
  • 24 hours per day, 7 days a week, 2 hour average response, same day

Client Replaceable Units (CRUs) may be provided as part of the machine's standard warranty CRU Service except that you may install a CRU yourself or request IBM installation, at no additional charge, under the CRU and On-site Service level specified above. For additional information on the CRU Service, see the warranty information.


Maintenance services

If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, through an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM. You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines on-site service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts. Service levels are response-time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country-specific and location-specific information. The following service selections are available as maintenance options for your machine type.

  • On-Site Repair, Monday through Friday (excluding holidays), 8am to 5pm, next business day.
  • On-Site Repair, Monday through Friday (excluding holidays), 8am to 5pm, 4 hour response objective. Response times are objectives and are not guaranteed.
  • On-Site Repair, 7 days a week, 24hrs/day.
  • On-Site Repair, 7 days a week, 24hrs/day, 2 hour response objective. Response times are objectives and are not guaranteed.

On-site Service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.

Client-Replaceable Unit (CRU) Service

If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), and depending upon the maintenance service offerings in your geography, IBM will ship the replacement CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request.

Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, 1) return instructions and a container are shipped with the replacement CRU, and 2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

CRUs are designated as being either a Tier 1 (mandatory) or a Tier 2 (optional) CRU.

Tier 1 (mandatory) CRUs: Installation of Tier 1 CRUs, as specified in this announcement, is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

For machines with On-site Same-day Response Service, IBM will replace a Tier 1 CRU part at your request, at no additional charge.

Tier 2 (optional) CRUs: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.

The following parts and feature(s) have been designated as Tier 1 CRUs:

  • TOD 3.0V Lithium
  • Fans
  • TPM Card
  • AC Power Supply
  • Disk
  • Memory
  • Processor
  • Adapter
  • Power Cords
  • Rails

CRU and Machine Exchange Service

At IBM's discretion you will receive CRU service or IBM will initiate shipment of a replacement machine to your location. You are responsible for its installation and verification of operation. You must pack the failed machine into the shipping container that contained the replacement machine and return the failed machine to IBM. Transportation charges, both ways, are paid by IBM. You may be charged for the replacement machine if IBM does not receive the failed machine within 15 days of your receipt of the replacement.


Non-IBM parts service

Under certain conditions, IBM provides services for selected non-IBM parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services.

This service includes hardware problem determination (PD) on the non-IBM parts (for example, adapter cards, PCMCIA cards, disk drives, memory) installed within IBM machines and provides the labor to replace the failing parts at no additional charge.

If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, clients are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service.

Usage plan machine

Yes

Average usage plan provisions apply

No

IBM hourly service rate classification

Two

When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.

General terms and conditions

Field-installable features

Yes

Model conversions

No

Machine installation

Client setup. Clients are responsible for installation according to the instructions IBM provides with the machine.

Graduated program license charges apply

No

Licensed Machine Code

IBM Machine Code is licensed for use by a client on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and acquired by the client. You can obtain the agreement by contacting your IBM representative. It can also be found on the License Agreement for Machine Code and Licensed Internal Code

Machine using LMC Type Model 7063-CR2

Access to Machine Code updates is conditioned on entitlement and license validation in accordance with IBM policy and practice. IBM may verify entitlement through client number, serial number, electronic restrictions, or any other means or methods employed by IBM in its discretion.

If the machine does not function as warranted and your problem can be resolved through your application of downloadable Machine Code, you are responsible for downloading and installing these designated Machine Code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable Machine Code changes; however, you may be charged for that service.

Educational allowance

A reduced charge is available to qualified education clients. The educational allowance may not be added to any other discount or allowance.

The educational allowance is 15% for the products in this announcement.



Back to topBack to top

Prices

Top rule

For additional information and current prices, contact your local IBM representative or IBM Business Partner.

Product charges

The following are newly announced features on the specific models of the IBM Power Systems 7063 machine type:

                                                Minimum Initial/         
                                                Monthly MES/             
                       Model   Feature Purchase Maint.  Both/        RP  
Description            number  number  price    charge  support  CSU MES 
 
HMC 7063-CR2
                       CR2                                       Yes     

EMEA Bulk MES Indicator
                       CR2     0004                     MES      Yes No 



One CSC Billing Unit
                       CR2     0010                     Both     Yes No 
Ten CSC Billing Units
                       CR2     0011                     Both     Yes No 
HMC 7063-CR2 License
                       CR2     0964                     Both     Yes No 
  



US TAA Compliance Indicator
                       CR2     0983                     Both     Yes No 
Asm in USA manufacturing plant
                       CR2     0984                     Both     Yes No 

 

Custom Serv. Specify, Roch
                       CR2     1140                     Both     Yes No 
One and only one rack indicator feature is required on
all orders (#4650 to #4666).
No Factory Integration Ind.
                       CR2     4650                     Initial  N/A No 
Rack Indicator, Rack 1
                       CR2     4651                     Both     Yes No 
Rack Indicator, Rack 2
                       CR2     4652                     Both     Yes No 
Rack Indicator, Rack 3
                       CR2     4653                     Both     Yes No 
Rack Indicator, Rack 4
                       CR2     4654                     Both     Yes No 
Rack Indicator, Rack 5
                       CR2     4655                     Both     Yes No 
Rack Indicator, Rack 6
                       CR2     4656                     Both     Yes No 
Rack Indicator, Rack 7
                       CR2     4657                     Both     Yes No 
Rack Indicator, Rack 8
                       CR2     4658                     Both     Yes No 
Rack Indicator, Rack 9
                       CR2     4659                     Both     Yes No 
Rack Indicator, Rack 10
                       CR2     4660                     Both     Yes No 
Rack Indicator, Rack 11
                       CR2     4661                     Both     Yes No 
Rack Indicator, Rack 12
                       CR2     4662                     Both     Yes No 
Rack Indicator, Rack 13
                       CR2     4663                     Both     Yes No 
Rack Indicator, Rack 14
                       CR2     4664                     Both     Yes No 
Rack Indicator, Rack 15
                       CR2     4665                     Both     Yes No 
Rack Indicator, Rack 16
                       CR2     4666                     Both     Yes No 
Pwr Crd 4.3m 14ft to IBM PDU
                       CR2     6458                     Both     Yes No 
Pwr Crd (14FT), Drwr - OEM PDU
                       CR2     6460                     Both     Yes No 
Pwr Crd 4.3m 14ft Wall OEM PDU
                       CR2     6469                     Both     Yes No 
Pwr Crd 1.8m 6ft Wall 125V/15A
                       CR2     6470                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6471                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6472                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6473                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6474                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6475                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6476                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6477                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6478                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6488                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6493                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6494                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall 250V,10A
                       CR2     6496                     Both     Yes No 
Power Cable Drawer to IBM PD 
                       CR2     6577                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall 125V,15A
                       CR2     6651                     Both     Yes No 
Pwr.Cord(9ft),To Wall/OEM PDU
                       CR2     6659                     Both     Yes No 
Pwr Crd 14ft 4.3m WallOEM PDU
                       CR2     6660                     Both     Yes No 
Pwr Crd 2.8m 9.2ft PDU
                       CR2     6665                     Both     Yes No 
Pwr Crd 4.3M, Drwr - OEM PDU
                       CR2     6669                     Both     Yes No 
Pwr Crd 2.7m, Drwr - IBM PDU
                       CR2     6671                     Both     Yes No 
Pwr Crd 2M, Drwr - IBM PDU
                       CR2     6672                     Both     Yes No 
Pwr Crd 2.7m 9ft Wall OEM PDU
                       CR2     6680                     Both     Yes No 
HMC/Srv Order Linkage Ind
                       CR2     9069                     Initial  N/A No 
Order Routing Indicator Syste
                       CR2     9169                     Initial  N/A No 
Language Group Spcf-US Eng
                       CR2     9300                     Initial  N/A No 
Month Indicator
                       CR2     9461                     Initial  N/A No 
Day Indicator
                       CR2     9462                     Initial  N/A No 
Hour Indicator
                       CR2     9463                     Initial  N/A No 
Minute Indicator
                       CR2     9464                     Initial  N/A No 
Qty Indicator
                       CR2     9465                     Initial  N/A No 
Countable Member Indicator
                       CR2     9466                     Initial  N/A No 
Language Group Spcf-Dutch
                       CR2     9700                     Initial  N/A No 
Language Group Spcf-French
                       CR2     9703                     Initial  N/A No 
Language Group Spcf-German
                       CR2     9704                     Initial  N/A No 
Language Group Spcf-Polish
                       CR2     9705                     Initial  N/A No 
Lang Group Specify - Norwegian
                       CR2     9706                     Initial  N/A No 
Lang.Group Spcf-Portuguese
                       CR2     9707                     Initial  N/A No 
Language Group Spcf-Spanish
                       CR2     9708                     Initial  N/A No 
Language Group Spcf-Italian  
                       CR2     9711                     Initial  N/A No 
Langua Gr Speci Canadian Frenc
                       CR2     9712                     Initial  N/A No 
Language Group Spcf-Japanese
                       CR2     9714                     Initial  N/A No 
Language Group Specify Tr Chin
                       CR2     9715                     Initial  N/A No 
Language Group Spcf-Korean
                       CR2     9716                     Initial  N/A No 
Language Group Spcf-Turkish
                       CR2     9718                     Initial  N/A No 
Language Group Spcf-Hungarian
                       CR2     9719                     Initial  N/A No 
Language Group Spcf-Slovakian
                       CR2     9720                     Initial  N/A No 
Language Group Spcf-Russian
                       CR2     9721                     Initial  N/A No 
Lang Group Spcf Simpl Chinese
                       CR2     9722                     Initial  N/A No 
Language Group Spcf-Czech
                       CR2     9724                     Initial  N/A No 
Language Group Spcf-Romanian
                       CR2     9725                     Initial  N/A No 
Lang Group Specify - Croatian  
                       CR2     9726                     Initial  N/A No 
Language Group Spcf-Slovenian
                       CR2     9727                     Initial  N/A No 
Lang Group Specify - Braz Port
                       CR2     9728                     Initial  N/A No 
Lang Group Specify - Thai
                       CR2     9729                     Initial  N/A No 
SP WAMO 5Y 24x7 SD
                       CR2     B0LP                     Both     Yes No 
SP HDR/MR POWER 5Y
                       CR2     B0PR                     Both     Yes No 
SP BS POWER 5Y
                       CR2     B0SR                     Both     Yes No 
SP WAMO 3Y 24x7 SD
                       CR2     B0UW                     Both     Yes No 


SP HDR/MR POWER 3Y
                       CR2     B0VH                     Both     Yes No 
AC Power Supply - 900W
                       CR2     EB2L                     Initial  N/A No 
RAID1 Enabled
                       CR2     EB2T                     Both     Yes No 
OP Panel w/out USB
                       CR2     EBZ0                     Initial  Yes No 
OP Panel 2x USB
                       CR2     EBZ1                     Initial  Yes No 
OP Panel w/out USB - OEM
                       CR2     EBZ2                     Initial  Yes No 
OP Panel 2x USB - OEM
                       CR2     EBZ3                     Initial  Yes No 
Custom Serv. Specify, Mexico
                       CR2     ECSM                     Both     Yes No 
Custom Serv. Spec Poughkeepsie
                       CR2     ECSP                     Both     Yes No 
1.8 TB 10K RPM SAS HDD
                       CR2     EHMD                     Both     Yes No 
Power Cord - Drawer to PDU
                       CR2     ELC5                     Both     Yes No 
Private Cloud Rack Solution
                       CR2     ELG2                     Initial  Yes No       
16 GB DDR4 Memory
                       CR2     EM62                     Both     Yes No 
32 GB DDR4 Memory
                       CR2     EM63                     Both     Yes No 
PCIe2 2-pt 10/1GbE BaseT RJ45
                       CR2     EN0W                     Both     Yes No 

 

6-core 3.0 GHz POWER9
                       CR2     EP75                     Both     Yes No 
Fixed Rail Kit 7063-CR2
                       CR2     ERK0                     Both     Yes No 
Adjust Rail Kit 7063-CR2
                       CR2     ERK1                     Both     Yes No 
S&H - No Charge
                       CR2     ESC0                     Both     N/A No 
S&H-a
                       CR2     ESC5                     Initial  N/A No 

The following are newly announced features on the specific models of the IBM Power Systems 7014 and 7965 machine type:

                                                Minimum Initial/         
                                                Monthly MES/             
Description            Model   Feature Purchase Maint.  Both/        RP  
Machine type 7014      number  number  price    charge  cupport  CSU MES 

Rack Content Spcfy 7063-CR2
                       T00     ERCN                     Initial  N/A No 
                       T42                              Initial  N/A No 
                                                Minimum Initial/         
                                                Monthly MES/             
Description            Model   Feature Purchase Maint.  Both/        RP  
Machine type 7965      number  number  price    charge  support  CSU MES 
 
Rack Content Spcfy 7063-CR2
                       S42     ERCN                     Initial  N/A No 

RP MES = Return parts, miscellaneous equipment specifications
CSU = Customer setup

Pricing terms

Prices in the following PDF prices link are suggested list prices on day of announcement for the U.S. only. They are provided for your information only. Dealer prices may vary, and prices may also vary by country. IBM list price does not include tax or shipping and is subject to change without notice.

ENUS-121-001-LIST_PRICES_2021_04_13.PDF ENUS-121-001-LIST_PRICES_2021_04_13.PDF

Annual minimum maintenance charges

Not applicable

ServiceElect (ESA) charges

For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified clients to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all client segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or go to the IBM Global Financing website for more information.

IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government clients. Rates are based on a client's credit rating, financing terms, offering type, equipment type and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.

Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology lifecycle.

Trademarks

POWER9 is a trademark of IBM Corporation in the United States, other countries, or both.

IBM, Power, POWER, POWER8, PowerVM, Global Technology Services, ServicePac and ibm.com are registered trademarks of IBM Corporation in the United States, other countries, or both.

Microsoft is a trademark of Microsoft Corporation in the United States, other countries, or both.

Oracle and Java are trademarks of Oracle and/or its affiliates in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at

Terms of use

For the most current information regarding IBM products, consult your IBM representative or reseller, or go to the IBM worldwide contacts page

IBM United States