IBM Power Systems and IBM BladeCenter : New features offered on select products
IBM United States Hardware Announcement 110-199October 7, 2010
 ENUS110-199.PDF
|
| Table of contents | ||||||||||||||||||||
|
|
| At a glance |
 |
IBM® Power® System enhancements:
- Gen2 PCIe riser card, and two Gen2 PCIe 10Gb Ethernet adapters for the IBM Power 720 and 740 Express® servers
- Smaller 4 GB memory feature option on the Power 710 and Power 730 Express servers
- Additional 3.55 GHz Power 740 configuration flexibility
- DC power and NEBS compliance now available on the Power 750 Express Server
- Expanded usage of replacement feature 5805 for SAS adapter feature 5803
- LTO-5 support by IBM i for the TS3100, TS3200, TS3310, and TS3500 tape libraries
IBM BladeCenter® enhancements:
- NEBS compliance on the BladeCenter PS700, PS701, and PS702
- 2980 watt power module for redundant power on the IBM BladeCenter H
- Feature number indicating there are two 2980 watt power modules in the BladeCenter H
- Broadcom 2-port Gb Ethernet Expansion Card (CIOv)
- QLogic Virtual Fabric Extension Module
- Cisco Nexus 4001I Switch Module and Software Upgrade License
Back to top
|
|
| Overview |
|
Several hardware enhancements are available in fourth quarter 2010 for the Power Systems™ servers. These include enhancements for the Power 720/740 (PCIe Gen2), Power 710/730 (memory), Power 740 (configuration flexibility), Power 750 (NEBs), IBM i LTO-5 support, BladeCenter H chassis (ac power and CNA), Power Blade (CIOv Ethernet), a Red Hat Linux® preload option, and more.
The following PCIe Gen2 features are available on the IBM Power 720 and IBM Power 740 Express servers and can provide greater bandwidth with a smaller number of PCI slots/adapters:
- The PCIe Riser Card (Gen2) (#5685) is an optional feature providing four PCIe Gen2 low-profile (LP) slots for Gen1 or Gen2 adapter cards. It is physically very similar to the PCIe Riser Card (Gen1)(#5610).
- The PCIe2 (Gen2) Low Profile 2-port 10GbE SR Adapter (#5284) is supported in the PCIe Riser Card (Gen2) (#5685) and provides two 10 Gb Ethernet SFP+ SR ports attaching optical fiber cable up to 300 m length. This feature requires feature number 5685.
- The PCIe2 (Gen2) Low Profile 2-Port 10GbE SFP+ Copper Adapter (#5286) is supported in the PCIe Riser Card (Gen2) (#5685) and provides two 10 Gb Ethernet SFP+ active copper twinax ports attaching cables up to 5 m length. This feature requires feature number 5685.
The IBM Power 710 and IBM Power 730 Express servers have additional memory granularity, and the 4-core Power 710 Express has a lower minimum memory configuration option with a new, smaller memory feature:
- 4 GB (2 x 2 GB) Memory DIMMs, 1066 MHz, 2 Gb DDR3 DRAM (#4525)
The Power 740 Express server is provided additional configuration flexibility. The 3.55 GHz processor module (#8355) is now available in a quantity of one, allowing for an 8-core 3.55 GHz configuration. Previously, only a quantity of two 3.55 GHz processor modules were supported. An IBM Edition is available for the new configuration. This configuration will be available on December 10, 2010.
An alternative power supply option enables dc power and NEBS compliance for the IBM Power 750 Express server:
- Power Supply, 1700 Watt, DC, Hot-swap, Base and Redundant (#7708)
To order additional PCIe 380 MB Cache SAS RAID Adapters, feature number 5805 will be used instead of initially announced feature 5903 on the IBM Power 520, Power 550, Power 560, and Power 750 Express, the Power 570, Power 575, Power 595, Power 755, Power 770, Power 780, and Power 795 servers, and the IBM Smart Cube 6840, 6841, and 6842. Features 5805 and 5903 are identical except that the feature 5805 cache batteries are slightly more narrow.
Additional LTO-5 support for IBM i
- Configuration flexibility is enhanced for IBM POWER6™ and POWER7™ technology-based servers running IBM i 6.1 with 6.1.1 LIC, or later. Starting November 26, 2010, the LTO-5 tape libraries TS3100, TS3200, TS3310, and TS3500 will be supported after applying the latest IBM i PTFs. This joins the LTO-5 bridge box support for the TS2250 and TS2350.
The following PCI-X Ethernet adapter is now orderable on the IBM Power 550, 560, 570, and 595 servers. Previously, this adapter was supported but not orderable:
- 4-Port 10/100/1000 Base-TX PCI-X Adapter (#5740)
IBM i 6.1 with i 6.1.1 machine code support is available for the PCIe cryptographic adapter (#4807, #4808, #4809) providing additional performance and function with improved RAS features. The adapter provides a powerful, tamper-resistant solution for POWER7 and POWER6 clients who handle secure cryptographic and digital signature workload in their business in a highly efficient manner. This support will be available on November 19, 2010. Previously, only IBM i 7.1 or AIX® support had been announced.
The following features are available on the BladeCenter H:
- IBM BladeCenter H
2980W AC Power Module
Indicator - Base (#9058)
This feature indicates that a BladeCenter H (7989-BCH) initial order contains two 2980 watt ac power modules. Every BladeCenter H initial order must contain two of feature 9058. Redundant power is available by ordering two of feature 3205.
- IBM BladeCenter H
2980W AC Power Module
- Redundant Power (#3205)
This feature contains one 2980 watt power module for redundant power on the BladeCenter H. This feature is required if any of the blade server bays 8 to 14 or switch module bays 5 to 10 are used. This feature must be ordered in a quantity of two. Feature number 9058 must be installed on the BladeCenter H in order to order this feature.
- QLogic Virtual Fabric Extension Module (#3268)
Clients using the BNT 10-port 10 Gb Ethernet Switch Module (#3248) for their LAN traffic can now combine it with this module and a Converged Network Adapter (CNA) such as the QLogic 2-port 10 Gb CNA (#8275) to converge their LAN and SAN on a single network. The QLogic Virtual Fabric Extension Module offers six ports of 8 Gb Fibre Channel connectivity, without the need for separate Fibre Channel expansion cards in the BladeCenter servers.
- Cisco Nexus 4001I Switch Module (#2241)
The Cisco Nexus 4001I Switch Module is a blade switch solution for the BladeCenter H chassis, providing the server I/O solution required for high-performance, scale-out, virtualized, and nonvirtualized Power computing architectures. It is a line rate, extremely low-latency, nonblocking, Layer 2, 10 Gigabit Ethernet blade switch that is fully compliant with Fibre Channel over Ethernet (FCoE) and IEEE Data Center Bridging standards.
The following feature is available on the IBM BladeCenter PS700, PS701, and PS702 Express servers, and the IBM Power 750 Express server:
- Flexible Thermal Settings for NEBS Applications (#0709)
The BladeCenter PS700, PS701, and PS702 Express and IBM Power 750 Express will be available in first quarter 2011 with support for NEBS requirements and conform to the NEBS Level 3 and the European Telecommunications Standards Institute (ETSI) standards.
Feature 0709 enables you to reset the thermal tolerances of the system to the higher limits specified by NEBS Level 3-compliant specifications.
The following feature is available on the IBM BladeCenter JS23, JS43, PS700, PS701, and PS702 Express:
- Broadcom 2-port Gb Ethernet Expansion Card (CIOv) (#8243)
The Broadcom 2-port Gb Ethernet Expansion Card (CIOv) is an Ethernet expansion card with two 1 Gb Ethernet ports designed for BladeCenter servers with CIOv expansion slots.
With this announcement, IBM now offers the option to have Red Hat Enterprise Linux 5 for POWER preloaded on select Power Systems servers. Save time and leverage IBM expertise by allowing IBM to install Linux in the factory prior to shipping the server. This option is available for the following IBM Power blades and IBM Power servers:
- IBM BladeCenter JS12, JS23, JS43, PS700, PS701, and PS702
- IBM Power Systems 520, 550, 560, 570, 710, 720, 730, 740, 750, 755, 770, and 780
Now available -- "How to" Support for IBM BladeCenter Power blades.
"How to" Support is now available for new and existing Power blade solutions to provide "How to" Support related to the IBM BladeCenter H and BladeCenter S chassis with Power blades and AIX, IBM i, or Linux. The support includes "How to" assistance with hardware, setup, and configuration. A single Linux on Power SupportLine agreement for one blade will cover hardware "how to" questions on all Power blades in the same chassis and the chassis. To receive full Linux support on Power, a SupportLine agreement must be purchased for each blade in the BladeCenter. A Software Maintenance Agreement (SWMA) is required for full support of AIX or IBM i on Power. The agreement can be purchased for a 1-year or 3-year period.
For one year coverage:
5771-LNX 1 year IBM Support for Linux
1128 1 year Support per Server $600.00 (Per BladeCenter provides 9/5
support)
1129 1 year Support per Server $810.00 (Per BladeCenter provides 7/24
support)
For three year coverage:
5773-LNX 3 year IBM Support for Linux
0953 3 year Support per Server $1,640.00 (Per BladeCenter provides 9/5
support)
0954 3 year Support per Server $2,214.00 (Per BladeCenter provides 7/24
support)
Back to top
|
|
| Key prerequisites |
|
Refer to the specific feature description for the required operating system level support.
Back to top
|
|
| Planned availability date |
|
- October 22, 2010, for feature numbers 0246, 0712, 1111, 1112, 1113, 1115, 1116, 1117, 1118, 1119, 1121, 1140, 3205, 5740, 6238, 6250, 6665, 8597, 8598, and 9058
- December 10, 2010, for feature numbers 0709, 2241, 2242, 3268, 4525, 5284, 5286, 5685, 5805, 7708, and 8243
Back to top
|
|
| Description |
|
IBM BladeCenter H 2980W AC Power Module Indicator - Base (#9058) and IBM BladeCenter H 2980W AC Power Module - Redundant Power (#3205)
Currently, the BladeCenter H (7989-BCH) chassis includes two nonfeaturized 2900 watt power modules and support for two additional (optional) 2900 watt power modules (#3200) for redundancy. Every BladeCenter H initial order must contain two of feature 9058, indicating the BladeCenter H will include two nonfeaturized 2980 watt power modules. Two additional (optional) 2980 watt power modules (#3205) can be ordered for redundant power on the BladeCenter H.
Features 3200 and 3205 cannot be mixed in the BladeCenter H. Feature number 9058 must be installed on the BladeCenter H in order to order feature 3205. Feature 3200 cannot be on the order if feature 9058 is installed in the system.
QLogic Virtual Fabric Extension Modual IBM BladeCenter (#3268)
Clients using the BNT 10-port 10 Gb Ethernet Switch Module (#3248) for their LAN traffic can now combine it with this module and a Converged Network Adapter such as the QLogic 2-port 10 Gb CNA (#8275) to converge their LAN and SAN on a single network. The QLogic Virtual Fabric Extension Module offers six ports of 8 Gb Fibre Channel connectivity, without the need for separate Fibre Channel expansion cards in the BladeCenter servers.
The QLogic Virtual Fabric Extension Module for IBM BladeCenter has the following features:
- Standard I/O module form factor
- Six external autosensing Fibre Channel ports that operate at 8 Gbps, 4 Gbps, or 2 Gbps
- External ports that can be configured as full fabric (GL, G, F, FL, E) Fibre Channel ports, or transparent fabric (TF) Fibre Channel ports
- Up to 40 Gbps of internal bandwidth to the switch module
- Two internal full-duplex 100 Mbps Ethernet interfaces for management
- Power-on self-test (POST) diagnostics and status reporting
- Support for Non-Disruptive Code Load Activation (NDCLA)
- Registered State Change Notification (RSCN)
- Support for standards-based FC-SW2 interoperability
- Support for transparent mode (NPIV)
- Error detection
- Cyclic redundancy check (CRC)
- 8-byte and 10-byte conversion
- Parity
- Long frame and short frame
- D_ID mismatch
- S_ID mismatch
- Frame bundling
- No frame bundling (frames are intermixed from different source ports)
- Soft lockdown (The I/O module waits for the sequence to be completed or a gap in the frame traffic to occur before it services requests from a different port.)
- Configurable Fabric Address Notification (FAN)
- Support for up to 239 Fabric Extension Modules, depending on the configuration
- Maximum frame size: 2148 bytes (2112 byte payload)
- Nonblocking architecture to prevent latency
- Support for the Call Home function
- Support for Domain Name Service (DNS)
- Support for Internet Protocol (IP) Version 6
- Support for Internet Protocol security (IPsec)
- Support for separate trap community strings for each trap address
- Support for Simple Network Management Protocol (SNMP) Version 3
- Support for vital product data (VPD)
- Support for optional SFP+ modules
- IBM 8 Gb SFP+ SW Optical Transceiver (part number 44X1964)
The QLogic Virtual Fabric Extension Module is installed in I/O bay 3 or Bridge bay 5 of the BladeCenter H. Installing two bridges, one in each bay, provides redundancy and performance benefits, although it is supported to install one QLogic Virtual Fabric Extension Module in bay 5 only. The QLogic Virtual Fabric Extension Module requires one or two 10-port 10 Gb Ethernet Switch Modules (#3248).
Broadcom 2-port Gb Ethernet Expansion Card (#8243)
The Broadcom 2-port Gb Ethernet Expansion Card (CIOv) is an Ethernet expansion card with two 1Gb Ethernet ports designed for BladeCenter servers with CIOv expansion slots.
This card is installed into the CIOv slot of the supported blade server. It provides connections to Ethernet-compatible modules located in bays 3 and 4 of supported BladeCenter chassis. The CIOv slot is a second-generation PCI Express x8 slot. A maximum of one Ethernet Expansion Card (CIOv) is supported per single-wide blade server.
Cisco Nexus 4001I Switch Module for IBM BladeCenter H (#2241)
The Cisco Nexus 4001I Switch Module is a blade switch solution for the BladeCenter H chassis, providing the server I/O solution required for high-performance, scale-out, virtualized, and nonvirtualized Power computing architectures. It is a line rate, extremely low-latency, nonblocking, Layer 2, 10 Gigabit Ethernet blade switch that is fully compliant with Fibre Channel over Ethernet (FCoE) and IEEE Data Center Bridging standards.
The Cisco Nexus 4001I enables a standards-based, high-performance Unified Fabric running over 10 Gigabit Ethernet in the blade server environment. This Unified Fabric enables consolidation of LAN traffic, storage traffic (IP-based such as iSCSI, NAS, and Fibre Channel SAN), and high-performance computing (HPC) traffic over a single 10 Gigabit Ethernet server network.
This offering works with BladeCenter Open Fabric Manager, providing all the benefits of I/O virtualization at 10 Gbps speed.
The Cisco Nexus 4001I Switch Module includes the following features and functions:
- Form-factor
- Single-height high-speed switch module
- External ports
- Six 10 Gb SFP+ ports operating at wire speed. Also designed to support 1 Gb SFP if required, with the flexibility of mixing 1 Gb/10 Gb. Table 2 lists supported transceivers and cables.
- One 10/100/1000 Mb copper RJ-45 used for management or data.
- An RS-232 RJ-45 connector for serial port that provides an additional means to configure the switch module. The console cable is supplied with the switch module.
- Internal ports
- Fourteen internal auto-negotiating ports: 1 Gb or 10 Gb to the server blades
- One internal full-duplex 100 Mbps port connected to the management module
- Scalability and performance
- Autosensing 1 Gb/10 Gb internal and external Ethernet ports for bandwidth optimization
- Nonblocking architecture with wire-speed forwarding of traffic
- Media access control (MAC) address learning: automatic update, supports up to 8 Kb MAC addresses
- EtherChannels, virtual port channels (vPC), and LACP (IEEE 802.3ad) link aggregation, up to 60 Gb of total uplink bandwidth per switch, up to seven trunk groups, and up to six ports per group
- Support for jumbo frames (up to 9216 bytes)
- Traffic suppression (unicast, multicast, and broadcast)
- IGMP snooping to limit flooding of IP multicast traffic (IGMP V2 and V3)
- Configurable traffic distribution schemes over EtherChannel links based on source/destination IP addresses, MAC addresses, or ports
- Spanning Tree edge ports (formerly PortFast) for rapid STP convergence
- Availability and redundancy
- IEEE 802.1D-2004 Rapid and Multiple Spanning Tree Protocols (802.1w and 802.1s)
- Layer 2 Trunk Failover to support active/standby configurations of network adapter teaming on blades
- VLAN support
- Up to 512 VLANs supported per switch; VLAN numbers ranging from 1 to 4000
- 802.1Q VLAN tagging support on all ports
- Private VLANs
- Security
- VLAN-based, MAC-based, and IP-based access control lists (ACLs)
- Role-based access control
- Radius, TACACS+
- Quality of service (QoS)
- Support for IEEE 802.1p CoS, IP ToS/DSCP, Protocol, IP Real Time Protocol, and ACL-based (MAC/IP source and destination addresses, VLANs) traffic classification and processing
- Traffic shaping and re-marking based on defined policies
- Eight Weighted Round Robin (WRR) priority queues per port for processing qualified traffic
- Fibre Channel over Ethernet
- Support for T11-compliant FCoE on all 10-Gigabit Ethernet interfaces.
- FCoE Initialization Protocol (FIP): Converged Enhanced Ethernet Data Center Bridging Exchange (CEE-DCBX) protocol supports T11-compliant Gen-2 CNAs.
- 802.1Q VLAN tagging for FCoE frames.
- Priority-based flow control (IEEE 802.1Qbb) simplifies management of multiple traffic flows over a single network link and creates lossless behavior for Ethernet by allowing class-of-service (CoS)-based flow control.
- Enhanced Transmission Selection (IEEE 802.1Qaz) enables consistent management of QoS at the network level by providing consistent scheduling of different traffic types (IP, storage, and so on).
- Data Center Bridging Exchange (DCBX) Protocol (IEEE 802.1AB) simplifies network deployment and reduces configuration errors by providing autonegotiation of IEEE 802.1 DCB features between the network interface card (NIC) and the switch and between switches.
- Manageability
- Command-line interface (CLI): You can configure switches using the CLI from an SSH V2 session, a Telnet session, or the console port. SSH provides a secure connection to the device.
- XML Management Interface over SSH: You can configure switches using the XML management interface, which is a programming interface based on the NETCONF protocol that complements the CLI functionality. For more information, see the Cisco NX-OS XML Interfaces User Guide.
- Cisco Data Center Manager support.
- Monitoring
- Switch LEDs for external port status and switch module status indication
- RMON
- Change tracking and remote logging with syslog feature
- Online diagnostics
- Cisco Fabric Services
- Session Manager
- Special functions
- Serial over LAN (SOL)
The Cisco Nexus 4001I Switch Module does not ship with either SFP+ Transceivers or SFP+ Copper Cables. The following part numbers can be ordered directly from Cisco Systems or authorized Cisco Systems resellers:
Description Cisco part number 10GBASE-SR SFP+ Module SFP-10GSR 10GBASE-LR SFP+ Module SFP-10GLR 10GBASE-CU SFP+ Cable 1 Meter SFP-H10GB-CU1M 10GBASE-CU SFP+ Cable 3 Meter SFP-H10GB-CU3M 10GBASE-CU SFP+ Cable 5 Meter SFP-H10GB-CU5M 1000BASE-T SFP GLC-T GE SFP, LC connector SX transceiver GLC-SX-MM GE SFP, LC connector LX/LH transceiver GLC-LH-SM
Software Upgrade License for Cisco Nexus 4001I (#2242)
The Cisco Nexus 4001I Switch Module is designed to support both 10 Gb Ethernet and Fibre Channel over Ethernet. Software Upgrade License for Cisco Nexus 4001I enables the switch to work in FCoE mode. When connected to a converged adapter in the server, this switch can route CEE packets to an upstream FCoE switch, which can then route the packets to the LAN or SAN.
PCIe Riser Card (Gen2) (#5685), PCIe2 (Gen2) Low Profile 2-port 10GbE SR Adapter (#5284), and PCIe2 (Gen2) Low Profile 2-Port 10GbE SFP+ Copper Adapter (#5286)
The PCIe Riser Card (Gen2) (#5685) is a follow-on to the PCIe Riser Card (Gen1) (#5610). These optional features provide four PCIe Gen1 (#5610) or Gen2 (#5685) connectors, allowing for installation of four low-profile (LP) adapter cards. Only Gen1 adapter cards are supported by feature 5610. Both Gen1 and Gen2 adapter cards are supported by feature 5685. Currently, the only PCIe adapter cards that can run at 8x PCIe Gen2 speed are the PCIe2 (Gen2) Low Profile 2-port 10GbE SR Adapter (#5284) and the PCIe2 (Gen2) Low Profile 2-Port 10GbE SFP+ Copper Adapter (#5286).
The PCIe Riser card (#5610 or #5685) is installed in GX++ slot 1, making the slot unavailable for a GX++ adapter.
Power Supply, 1700 Watt, DC, Hot-swap, Base and Redundant (#7708)
This feature provides a 1700 watt dc power supply, either as the primary power supply in the system or the secondary power supply for redundant power. AC and dc power supplies cannot be mixed in a system. Two power supplies are required on an order for the Power 750 (8233-E8B).
PCIe 380 MB Cache Dual - x4 3 Gb SAS RAID Adapter (#5805)
The PCIe 380 MB Cache Dual - x4 3 Gb SAS RAID Adapter is a short, full-high form-factor adapter that supports the attachment of SAS disk and SAS solid-state drives (SSD) using a pair of mini SAS 4x connectors. Write cache can provide an I/O performance boost even if RAID 5/6/10 is not used. From a high-level perspective, except for having a larger write cache, it is very similar to the feature 5902 PCI-X SAS adapter and provides a high-performance connection to SAS devices. Two of feature 5805 provides for mirrored write cache data and mirrored RAID parity footprints between the adapters for superior availability. Feature 5805 is installed in pairs, allowing for redundancy of the write cache. If the feature 5805 pairing is broken, then write cache is disabled.
Feature 5805 supports SAS SFF disk drives located in a PCIe 12X I/O Drawer or SAS disk drives located in an EXP 12S Disk Drawer. AIX/Linux formatted SAS drives can be attached, and RAID 0, RAID 5, RAID 6, and RAID 10 are supported. The CCIN number for feature 5805 is 574E.
With proper cabling and configuration, multiple wide ports are used to provide redundant paths to each dual-port SAS disk or SSD. The adapter manages SAS path redundancy and path switching should a SAS drive failure occur. The pairing of feature 5805 provides a high availability I/O configuration to protect against the failure of a SAS adapter. SAS X cables attach SAS disk drives in EXP 12S Disk Drawers. SAS feature 3688 cables attach SFF SAS drives in an PCIe 12X I/O Drawer. The high availability I/O configuration connection is provided via the internal wiring within the PCIe 12X I/O drawer itself.
Highlights:
- Supports up to 48 SAS disks when configured with four feature 5886 EXP 12S Disk Drawers.
- SAS speed = 3 Gbs.
- SAS Serial SCSI Protocol (SSP) and Serial Management Protocol (SMP).
- 380 MB of nonvolatile fast write cache can increase disk subsystem performance.
- Dual controller supports mirrored write cache data and mirrored RAID parity footprints.
- Concurrent firmware update.
4 GB (2 x 2 GB) Memory DIMMs, 1066 MHz, 2 Gb DDR3 DRAM (#4525)
This memory feature offers customers a third option when ordering memory for the Power 710 and Power 730 Express servers. This announcement changes the minimum system configurations on the Power 710 and Power 730.
The minimum Power 710 initial order must include a processor module, processor activations, memory, one HDD/SSD, a storage backplane, a power supply and power cord, an operating system indicator, a chassis indicator, and a Language Group Specify.
If IBM i is the Primary Operating System (#2145), the initial order must also include one additional HDD/SSD, Mirrored System Disk Level Specify Code, and a System Console Indicator. A DVD is defaulted on every order but may be de-selected.
The minimum defined initial order configuration, if no choice is made, when AIX or Linux is the primary operating system is:
Feature number Description
8350 0/4 core 3.0 GHz POWER7 Processor Module
4 x 8360 4 Processor Activations
4525 4 GB (2 x 2 GB) Memory
1883 73.4 GB 15k SFF HDD
5263 Storage Backplane for 2.5-inch Drives
/SATA DVD/Tape
1832 Quad-port RJ45 1 Gb HEA
5603 Power Supply, 1725 Watt AC
7317 Single Processor Chassis
9300/97xx) Language Group Specify
2146 or 2147 Primary Operating System Indicator-IBM AIX (2146)
or Linux (2147)
6xxx One Power Cord
Note: No internal DASD is required if feature 0837 (Boot from SAN) is
selected. A Fibre Channel or Fibre Channel over Ethernet adapter must be ordered
if feature 0837 is selected.
The minimum defined initial order configuration, if no choice is made, when IBM i is the primary operating system is:
Feature number Description
8350 0/4 core 3.0 GHz POWER7 Processor Module
4 x 8360 4 Processor Activations
4525 4 GB (2 x 2 GB) Memory
2 x 1884 69.7 GB 15K RPM SAS SFF HDD
5268 Storage Backplane for six SFF Drives/SATA
DVD bay/Dual Write Cache SAS RAID, external SAS
port
1832 Quad-port RJ45 1 Gb HEA
5603 Power Supply, 1725 Watt AC
7317 Single Processor Chassis
9300/97xx) Language Group Specify
2145 Primary Operating System Indicator - IBM i
0040 Mirrored System Disk Level Specify Code
0566 or 0567 IBM i 6.1.1 or IBM i 7.1 indicator
5550 System Console on HMC Indicator
6xxx One Power Cord
Notes:
- When IBM i is the primary operating system (#2145), a DVD-ROM or DVD-RAM must be accessible by the Power 710. A DVD will be defaulted on every order but may be de-selected.
- No internal DASD is required if feature 0837 (Boot from SAN) is selected. A Fibre Channel or Fibre Channel over Ethernet adapter must be ordered if feature 0837 is selected.
The minimum Power 730 initial order must include two processor modules, processor activations, memory, one HDD/SSD, a storage backplane, two power supplies and two power cords, an operating system indicator, a chassis indicator, and a Language Group Specify.
If IBM i is the Primary Operating System (#2145), the initial order must also include one additional HDD/SSD, Mirrored System Disk Level Specify Code, and a System Console Indicator. A DVD is defaulted on every order but may be de-selected.
The minimum defined initial order configuration, if no choice is made, when AIX or Linux is the primary operating system is:
Feature number Description
2 x 8350 0/4 core 3.0 GHz POWER7 Processor Module
8 x 8360 8 Processor Activations
2 x 4525 8 GB (2 x 2 GB) Memory
1883 73.4 GB 15k SFF HDD
5263 Storage Backplane for 2.5-inch Drives
/SATA DVD/Tape
1832 Quad-port RJ45 1 Gb HEA
2 x 5603 Power Supply, 1725 Watt AC
7318 Two Processor Chassis
9300/97xx) Language Group Specify
2146 or 2147 Primary Operating System Indicator-IBM AIX (2146)
or Linux (2147)
2 x 6xxx Two Power Cords
Note: No internal DASD is required if feature 0837 (Boot from SAN) is
selected. A Fibre Channel or Fibre Channel over Ethernet adapter must be ordered
if feature 0837 is selected.
The minimum defined initial order configuration, if no choice is made, when IBM i is the primary operating system is:
Feature number Description
2 x 8350 0/4 core 3.0 GHz POWER7 Processor Module
8 x 8360 8 Processor Activations
2 x 4525 8 GB (2 x 2 GB) Memory
2 x 1884 69.7 GB 15K RPM SAS SFF HDD
5268 Storage Backplane for six SFF Drives/SATA
DVD bay/Dual Write Cache SAS RAID, external SAS
port
1832 Quad-port RJ45 1 Gb HEA
2 x 5603 Power Supply, 1725 Watt AC
7318 Two Processor Chassis
9300/97xx) Language Group Specify
2145 Primary Operating System Indicator - IBM i
0040 Mirrored System Disk Level Specify Code
0566 or 0567 IBM i 6.1.1 or IBM i 7.1 indicator
5550 System Console on HMC Indicator
2 x 6xxx Two Power Cords
Notes:
- When IBM i is the primary operating system (#2145) a DVD-ROM or DVD-RAM must be accessible by the Power 730.
- No internal DASD is required if feature 0837 (Boot from SAN) is selected. A Fibre Channel or Fibre Channel over Ethernet adapter must be ordered if feature 0837 is selected.
Accessibility by people with disabilities
A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at:
Section 508 of the U.S. Rehabilitation Act
IBM Power Systems models are capable, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it.
Back to top
|
|
| Statement of general direction |
|
Red Hat has stated that Red Hat Enterprise Linux 6 intends to support PCI Express 2.0 adapters on Power 720 and Power 740 systems.
All statements regarding IBM's plans, directions, and intent are subject to change or withdrawal without notice. Any reliance on these statements of general direction is at the relying party's sole risk and will not create liability or obligation for IBM.
Back to top
|
|
| Product number |
|
The following are newly announced features on the specific models of the IBM Power Systems 7014, 7042, 7316, 7778, 7779, 7809, 7989, 7998, 8202, 8203, 8204, 8205, 8231, 8233, 8234, 8236, 8261, 8406, 9117, 9119, 9125, and 9179 machine type:
Machine Feature
Description type Model number
Flexible Thermal Settings for NEBS Applications 8233 E8B 0709
8406 70Y
71Y
Manufacturing Routing Code for CSC 8204 E8A 0712
8234 EMA
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 3M BLUE 8234 EMA 1111
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 10M BLUE 8234 EMA 1112
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 25M BLUE 8234 EMA 1113
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 3M GREEN 8234 EMA 1115
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 10M GREEN 8234 EMA 1116
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 25M GREEN 8234 EMA 1117
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 3M YELLOW 8234 EMA 1118
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 10M YELLOW 8234 EMA 1119
9117 MMA
9119 FHA
CAT5E Ethernet Cable, 25M YELLOW 8234 EMA 1121
9117 MMA
9119 FHA
Custom Service Specify, Rochester Minn, USA 7014 B42 1140
S25
T00
T42
7042 C08
CR5
CR6
7316 TF3
7778 23X
7779 BCS
7809 H22
7989 BCH
7998 60X
8202 E4B
8203 E4A
8204 E8A
8205 E6B
8231 E2B
8233 E8B
8234 EMA
8236 E8C
8261 E4S
8406 70Y
71Y
9117 MMA
MMB
9119 FHA
FHB
9179 MHB
Cisco Nexus 4001I Switch Module for IBM
BladeCenter H 7989 BCH 2241
Software Upgrade License for Cisco Nexus 4001I 7989 BCH 2242
IBM BladeCenter H 2980W AC Power Module -
Redundant Power 7989 BCH 3205
QLogic Virtual Fabric Extension Module for IBM
BladeCenter 7989 BCH 3268
4GB (2x2GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM 8231 E2B 4525
PCIe2 LP 2-port 10GbE SR Adapter 8202 E4B 5284
8205 E6B
PCIe2 LP 2-Port 10GbE SFP+ Copper Adapter 8202 E4B 5286
8205 E6B
PCIe Riser Card (Gen2) 8202 E4B 5685
8205 E6B
4-Port 10/100/1000 Base-TX PCI-X Adapter 8204 E8A 5740
8234 EMA
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter 8203 E4A 5805
8204 E8A
8233 E8B
8234 EMA
8236 E8C
8261 E4S
9117 MMA
MMB
9119 FHA
FHB
9125 F2A
9179 MHB
HIGH-END APPEARANCE SIDE COVERS 9179 MHB 6238
HIGH-END APPEARANCE FRONT DOOR 9179 MHB 6250
Power Supply, 1700 Watt, DC, Hot-swap, Base and
Redundant 8233 E8B 7708
Broadcom 2-port Gb Ethernet Expansion Card (CIOv) 7778 23X 8243
8406 70Y
71Y
PowerVM -Standard Edition, Qty 100 of #7943 9119 FHB 8597
PowerVM (Enterprise Edition), Qty 100 of #8002 9119 FHB 8598
IBM BladeCenter H 2980W AC Power Module
Indicator - Base 7989 BCH 9058
The following are features already announced for the IBM Power Systems 7014, 9117, and 9119 machine type:
Machine Feature
Description type Model number
Rack Content Specify: 9910-P64/E64/E65 FC 6641/
6645/6645 Battery Module - 3EIA 7014 S25 0246
4-Port 10/100/1000 Base-TX PCI-X Adapter 9117 MMA 5740
9119 FHA
Power Cord 3 M (10 ft), Drawer to IBM PDU, 250V/
10A 7014 S25 6665
Feature conversions
The existing components being replaced during a model or feature conversion become the property of IBM and must be returned.
Feature conversions are always implemented on a "quantity of one for quantity of one" basis. Multiple existing features may not be converted to a single new feature. Single existing features may not be converted to multiple new features.
The following conversions are available to customers:
Feature conversions for 8203-E4A to 8202-E4B adapter features
Return
From FC: To FC: parts
5904 - PCI-X DDR 1.5GB 5908 - PCI-X DDR 1.5GB No Cache SAS RAID Adapter Cache SAS RAID Adapter (BSC)
Feature conversions for 9117-MMA to 9117-MMB adapter features
Return
From FC: To FC: parts
5904 - PCI-X DDR 1.5GB 5908 - PCI-X DDR 1.5GB No Cache SAS RAID Adapter Cache SAS RAID Adapter (BSC)
Feature conversions for 9117-MMA to 9179-MHB adapter features
Return
From FC: To FC: parts
5904 - PCI-X DDR 1.5GB 5908 - PCI-X DDR 1.5GB No Cache SAS RAID Adapter Cache SAS RAID Adapter (BSC)
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld® ID and password are required (use IBM ID).
Back to top
|
|
| Publications |
|
No publications are shipped with the announced product.
The IBM Systems Information Center provides you with a single information center where you can access product documentation for IBM systems hardware, operating systems, and server software. Through a consistent framework, you can efficiently find information and personalize your access. The IBM Systems Information Center is at
IBM Publications Center Portal
The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge.
Back to top
|
|
| Services |
|
Global Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
|
| Technical information |
|
Specified operating environment
Software requirements
Refer to the specific feature description for the required operating system level support.
Planning information
Cable orders
No cables are required.
Security, auditability, and control
This product uses the security and auditability features of host hardware, host software, and application software.
Limitations:
The BladeCenter server has no security-intrusion detection.
The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
Back to top
|
|
| IBM Electronic Services |
|
IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.
The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.
The Electronic Service Agent™ is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server.
To learn how Electronic Services can work for you, visit
Back to top
|
|
| Terms and conditions |
|
MES discount applicable
Equal to the volume commitment discount
Field-installable feature
Yes
Warranty period
These features assume the same warranty or maintenance terms as the machine in which they are installed for the full warranty or maintenance period announced for such machine.
Customer setup
Yes, except for feature 5805 on the 9119-FHA and 9119-FHB, and feature 5740 on the 9119-FHA.
Machine code
Same license terms and conditions as base machine.
Back to top
|
|
| Prices |
|
For additional information and current prices, contact your local IBM representative.
The following are newly announced features on the specific models on the IBM Power Systems 7014, 7042, 7316, 7778, 7779, 7809, 7989, 7998, 8202, 8203, 8204, 8205, 8231, 8233, 8234, 8236, 8261, 8406, 9117, 9119, 9125, and 9179 machine type:
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7014 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
B42 1140 Both Yes No
S25 Both Yes No
T00 Both Yes No
T42 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7042 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
C08 1140 Both Yes No
CR5 Both Yes No
CR6 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7316 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
TF3 1140 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7778 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
23X 1140 Both Yes No
Broadcom 2-port Gb Ethernet Expansion Card (CIOv)
23X 8243 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7779 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
BCS 1140 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7809 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
H22 1140 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7989 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
BCH 1140 Both Yes No
Cisco Nexus 4001I Switch Module for IBM BladeCenter H
BCH 2241 Both Yes No
Software Upgrade License for Cisco Nexus 4001I
BCH 2242 Both Yes No
IBM BladeCenter H 2980W AC Power Module - Redundant Power
BCH 3205 Both Yes No
QLogic Virtual Fabric Extension Module for IBM BladeCenter
BCH 3268 Both Yes No
IBM BladeCenter H 2980W AC Power Module Indicator - Base
BCH 9058 Initial N/A No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7998 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
60X 1140 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8202 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
E4B 1140 Both Yes No
PCIe2 LP 2-port 10GbE SR Adapter
E4B 5284 Both Yes No
PCIe2 LP 2-Port 10GbE SFP+ Copper Adapter
E4B 5286 Both Yes No
PCIe Riser Card (Gen2)
E4B 5685 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8203 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
E4A 1140 Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
E4A 5805 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8204 number numbers price Charge Support CSU MES
Manufacturing Routing Code for CSC
E8A 0712 Initial N/A No
Custom Service Specify, Rochester Minn, USA
E8A 1140 Both Yes No
4-Port 10/100/1000 Base-TX PCI-X Adapter
E8A 5740 Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
E8A 5805 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8205 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
E6B 1140 Both Yes No
PCIe2 LP 2-port 10GbE SR Adapter
E6B 5284 Both Yes No
PCIe2 LP 2-Port 10GbE SFP+ Copper Adapter
E6B 5286 Both Yes No
PCIe Riser Card (Gen2)
E6B 5685 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8231 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
E2B 1140 Both Yes No
4GB (2x2GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
E2B 4525 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8233 number numbers price Charge Support CSU MES
Flexible Thermal Settings for NEBS Applications
E8B 0709 Both Yes No
Custom Service Specify, Rochester Minn, USA
E8B 1140 Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
E8B 5805 Both Yes No
Power Supply, 1700 Watt, DC, Hot-swap, Base and Redundant
E8B 7708 Initial N/A No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8234 number numbers price Charge Support CSU MES
Manufacturing Routing Code for CSC
EMA 0712 Initial N/A No
CAT5E Ethernet Cable, 3M BLUE
EMA 1111 Both Yes No
CAT5E Ethernet Cable, 10M BLUE
EMA 1112 Both Yes No
CAT5E Ethernet Cable, 25M BLUE
EMA 1113 Both Yes No
CAT5E Ethernet Cable, 3M GREEN
EMA 1115 Both Yes No
CAT5E Ethernet Cable, 10M GREEN
EMA 1116 Both Yes No
CAT5E Ethernet Cable, 25M GREEN
EMA 1117 Both Yes No
CAT5E Ethernet Cable, 3M YELLOW
EMA 1118 Both Yes No
CAT5E Ethernet Cable, 10M YELLOW
EMA 1119 Both Yes No
CAT5E Ethernet Cable, 25M YELLOW
EMA 1121 Both Yes No
Custom Service Specify, Rochester Minn, USA
EMA 1140 Both Yes No
4-Port 10/100/1000 Base-TX PCI-X Adapter
EMA 5740 Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
EMA 5805 MES Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8236 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
E8C 1140 Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
E8C 5805 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8406 number numbers price Charge Support CSU MES
Flexible Thermal Settings for NEBS Applications
70Y 0709 Both Yes No
71Y Both Yes No
Custom Service Specify, Rochester Minn, USA
70Y 1140 Both Yes No
71Y Both Yes No
Broadcom 2-port Gb Ethernet Expansion Card (CIOv)
70Y 8243 Both Yes No
71Y Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9117 number numbers price Charge Support CSU MES
Manufacturing Routing Code for CSC
MMA 0712 Initial N/A No
CAT5E Ethernet Cable, 3M BLUE
MMA 1111 Both Yes No
CAT5E Ethernet Cable, 10M BLUE
MMA 1112 Both Yes No
CAT5E Ethernet Cable, 25M BLUE
MMA 1113 Both Yes No
CAT5E Ethernet Cable, 3M GREEN
MMA 1115 Both Yes No
CAT5E Ethernet Cable, 10M GREEN
MMA 1116 Both Yes No
CAT5E Ethernet Cable, 25M GREEN
MMA 1117 Both Yes No
CAT5E Ethernet Cable, 3M YELLOW
MMA 1118 Both Yes No
CAT5E Ethernet Cable, 10M YELLOW
MMA 1119 Both Yes No
CAT5E Ethernet Cable, 25M YELLOW
MMA 1121 Both Yes No
Custom Service Specify, Rochester Minn, USA
MMA 1140 Both Yes No
MMB Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
MMA 5805 MES Yes No
MMB Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9119 number numbers price Charge Support CSU MES
Manufacturing Routing Code for CSC
FHA 0712 Initial N/A No
CAT5E Ethernet Cable, 3M BLUE
FHA 1111 Both Yes No
CAT5E Ethernet Cable, 10M BLUE
FHA 1112 Both Yes No
CAT5E Ethernet Cable, 25M BLUE
FHA 1113 Both Yes No
CAT5E Ethernet Cable, 3M GREEN
FHA 1115 Both Yes No
CAT5E Ethernet Cable, 10M GREEN
FHA 1116 Both Yes No
CAT5E Ethernet Cable, 25M GREEN
FHA 1117 Both Yes No
CAT5E Ethernet Cable, 3M YELLOW
FHA 1118 Both Yes No
CAT5E Ethernet Cable, 10M YELLOW
FHA 1119 Both Yes No
CAT5E Ethernet Cable, 25M YELLOW
FHA 1121 Both Yes No
Custom Service Specify, Rochester Minn, USA
FHA 1140 Both Yes No
FHB Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
FHA 5805 Both No No
FHB Both No No
PowerVM -Standard Edition, Qty 100 of #7943
FHB 8597 Both Yes No
PowerVM (Enterprise Edition), Qty 100 of #8002
FHB 8598 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9125 number numbers price Charge Support CSU MES
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
F2A 5805 MES Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9179 number numbers price Charge Support CSU MES
Custom Service Specify, Rochester Minn, USA
MHB 1140 Both Yes No
PCIe 380MB Cache Dual - x4 3Gb SAS RAID Adapter
MHB 5805 Both Yes No
HIGH-END APPEARANCE SIDE COVERS
MHB 6238 MES Yes No
HIGH-END APPEARANCE FRONT DOOR
MHB 6250 MES Yes No
The following are features already announced for the IBM Power Systems 7014, 9117, and 9119 machine type:
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7014 number numbers price Charge Support CSU MES
Rack Content Specify: 9910-P64/E64/E65 FC 6641/6645/6645 Battery
Module - 3EIA
S25 0246 Both Yes No
Power Cord 3 M (10 ft), Drawer to IBM PDU, 250V/10A
S25 6665 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9117 number numbers price Charge Support CSU MES
4-Port 10/100/1000 Base-TX PCI-X Adapter
MMA 5740 Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9119 number numbers price Charge Support CSU MES
4-Port 10/100/1000 Base-TX PCI-X Adapter
FHA 5740 Both No No
Feature conversions
Feature conversions for 8203-E4A to 8202-E4B adapter features
Parts Purchase
From FC: To FC: Returned Price
5904 - PCI-X DDR 1.5GB 5908 - PCI-X DDR 1.5GB No
Cache SAS RAID Adapter Cache SAS RAID Adapter
(BSC)
Feature conversions for 9117-MMA to 9117-MMB adapter features
Parts Purchase
From FC: To FC: Returned Price
5904 - PCI-X DDR 1.5GB 5908 - PCI-X DDR 1.5GB No
Cache SAS RAID Adapter Cache SAS RAID Adapter
(BSC)
Feature conversions for 9117-MMA to 9179-MHB adapter features
Parts Purchase
From FC: To FC: Returned Price
5904 - PCI-X DDR 1.5GB 5908 - PCI-X DDR 1.5GB No
Cache SAS RAID Adapter Cache SAS RAID Adapter
(BSC)
| Machine type | Model | Feature number | Description | One-time charge |
| 7014 | B42 | 1140 | Custom Service Specify,Roches | $0 |
| 7014 | S25 | 1140 | Custom Service Specify,Roches | $0 |
| 7014 | T00 | 1140 | Custom Service Specify,Roches | $0 |
| 7014 | T42 | 1140 | Custom Service Specify,Roches | $0 |
| 7042 | C08 | 1140 | Custom Service Specify,Roches | $0 |
| 7042 | CR5 | 1140 | Custom Service Specify,Roches | $0 |
| 7042 | CR6 | 1140 | Custom Service Specify,Roches | $0 |
| 7316 | TF3 | 1140 | Custom Service Specify,Roches | $0 |
| 7778 | 23X | 1140 | Custom Service Specify,Roches | $0 |
| 7778 | 23X | 8243 | Broadcom 2-port Gb Ethernet Ex | $299 |
| 7779 | BCS | 1140 | Custom Service Specify,Roches | $0 |
| 7809 | H22 | 1140 | Custom Service Specify,Roches | $0 |
| 7989 | BCH | 1140 | Custom Service Specify,Roches | $0 |
| 7989 | BCH | 2241 | Cisco Nexus 4001I Switch Modul | $11,999 |
| 7989 | BCH | 2242 | Software Upgrade License for C | $3,899 |
| 7989 | BCH | 3205 | IBM BladeCenter H 2980W AC Pow | $549 |
| 7989 | BCH | 3268 | QLogic Virtual Fabric Extensio | $6,499 |
| 7989 | BCH | 9058 | BladeCenter Power Module Ind | $0 |
| 7998 | 60X | 1140 | Custom Service Specify,Roches | $0 |
| 8202 | E4B | 1140 | Custom Service Specify,Roches | $0 |
| 8202 | E4B | 5284 | PCIe2 LP 2-port 10GbE SR Adapt | $3,500 |
| 8202 | E4B | 5286 | PCIe2 LP 2-Port 10GbE SFP+ Cop | $1,800 |
| 8202 | E4B | 5685 | PCIe Riser Card (Gen2) | $2,000 |
| 8203 | E4A | 1140 | Custom Service Specify,Roches | $0 |
| 8203 | E4A | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,199 |
| 8204 | E8A | 0712 | Manufacturing Routing Code for | $0 |
| 8204 | E8A | 1140 | Custom Service Specify,Roches | $0 |
| 8204 | E8A | 5740 | 4-Port 10/100/1000 Base-TX PCI | $830 |
| 8204 | E8A | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,199 |
| 8205 | E6B | 1140 | Custom Service Specify,Roches | $0 |
| 8205 | E6B | 5284 | PCIe2 LP 2-port 10GbE SR Adapt | $3,500 |
| 8205 | E6B | 5286 | PCIe2 LP 2-Port 10GbE SFP+ Cop | $1,800 |
| 8205 | E6B | 5685 | PCIe Riser Card (Gen2) | $2,000 |
| 8231 | E2B | 1140 | Custom Service Specify,Roches | $0 |
| 8231 | E2B | 4525 | 4GB (2x2GB) Memory DIMMs,1066 | $532 |
| 8233 | E8B | 0709 | Flexible Thermal Settings for | $0 |
| 8233 | E8B | 1140 | Custom Service Specify,Roches | $0 |
| 8233 | E8B | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,199 |
| 8233 | E8B | 7708 | Power Supply,1700 Watt,DC,H | $1,500 |
| 8234 | EMA | 0712 | Manufacturing Routing Code for | $0 |
| 8234 | EMA | 1111 | CAT5E Ethernet Cable,3M BLUE | $25 |
| 8234 | EMA | 1112 | CAT5E Ethernet Cable,10M BLUE | $45 |
| 8234 | EMA | 1113 | CAT5E Ethernet Cable,25M BLUE | $80 |
| 8234 | EMA | 1115 | CAT5E Ethernet Cable,3M GREEN | $25 |
| 8234 | EMA | 1116 | CAT5E Ethernet Cable,10M GREE | $45 |
| 8234 | EMA | 1117 | CAT5E Ethernet Cable,25M GREE | $80 |
| 8234 | EMA | 1118 | CAT5E Ethernet Cable,3M YELLO | $25 |
| 8234 | EMA | 1119 | CAT5E Ethernet Cable,10M YELL | $45 |
| 8234 | EMA | 1121 | CAT5E Ethernet Cable,25M YELL | $80 |
| 8234 | EMA | 1140 | Custom Service Specify,Roches | $0 |
| 8234 | EMA | 5740 | 4-Port 10/100/1000 Base-TX PCI | $830 |
| 8234 | EMA | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,199 |
| 8236 | E8C | 1140 | Custom Service Specify,Roches | $0 |
| 8236 | E8C | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,199 |
| 8406 | 70Y | 0709 | Flexible Thermal Settings for | $0 |
| 8406 | 71Y | 0709 | Flexible Thermal Settings for | $0 |
| 8406 | 70Y | 1140 | Custom Service Specify,Roches | $0 |
| 8406 | 71Y | 1140 | Custom Service Specify,Roches | $0 |
| 8406 | 70Y | 8243 | Broadcom 2-port Gb Ethernet Ex | $299 |
| 8406 | 71Y | 8243 | Broadcom 2-port Gb Ethernet Ex | $299 |
| 9117 | MMA | 0712 | Manufacturing Routing Code for | $0 |
| 9117 | MMA | 1111 | CAT5E Ethernet Cable,3M BLUE | $33 |
| 9117 | MMA | 1112 | CAT5E Ethernet Cable,10M BLUE | $59 |
| 9117 | MMA | 1113 | CAT5E Ethernet Cable,25M BLUE | $104 |
| 9117 | MMA | 1115 | CAT5E Ethernet Cable,3M GREEN | $33 |
| 9117 | MMA | 1116 | CAT5E Ethernet Cable,10M GREE | $59 |
| 9117 | MMA | 1117 | CAT5E Ethernet Cable,25M GREE | $104 |
| 9117 | MMA | 1118 | CAT5E Ethernet Cable,3M YELLO | $33 |
| 9117 | MMA | 1119 | CAT5E Ethernet Cable,10M YELL | $59 |
| 9117 | MMA | 1121 | CAT5E Ethernet Cable,25M YELL | $104 |
| 9117 | MMA | 1140 | Custom Service Specify,Roches | $0 |
| 9117 | MMB | 1140 | Custom Service Specify,Roches | $0 |
| 9117 | MMA | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,880 |
| 9117 | MMB | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,880 |
| 9119 | FHA | 0712 | Manufacturing Routing Code for | $0 |
| 9119 | FHA | 1111 | CAT5E Ethernet Cable,3M BLUE | $33 |
| 9119 | FHA | 1112 | CAT5E Ethernet Cable,10M BLUE | $59 |
| 9119 | FHA | 1113 | CAT5E Ethernet Cable,25M BLUE | $104 |
| 9119 | FHA | 1115 | CAT5E Ethernet Cable,3M GREEN | $33 |
| 9119 | FHA | 1116 | CAT5E Ethernet Cable,10M GREE | $59 |
| 9119 | FHA | 1117 | CAT5E Ethernet Cable,25M GREE | $104 |
| 9119 | FHA | 1118 | CAT5E Ethernet Cable,3M YELLO | $33 |
| 9119 | FHA | 1119 | CAT5E Ethernet Cable,10M YELL | $59 |
| 9119 | FHA | 1121 | CAT5E Ethernet Cable,25M YELL | $104 |
| 9119 | FHA | 1140 | Custom Service Specify,Roches | $0 |
| 9119 | FHB | 1140 | Custom Service Specify,Roches | $0 |
| 9119 | FHA | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,880 |
| 9119 | FHB | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,880 |
| 9119 | FHB | 8597 | Qty 100 x feat 7943 Std Ed | $0 |
| 9119 | FHB | 8598 | Qty 100 x feat 8002 Enter Ed | $0 |
| 9125 | F2A | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,880 |
| 9179 | MHB | 1140 | Custom Service Specify,Roches | $0 |
| 9179 | MHB | 5805 | PCIe 380MB Cache Dual - x4 3Gb | $2,880 |
| 9179 | MHB | 6238 | HIGH-END APPEARANCE SIDE COVER | $650 |
| 9179 | MHB | 6250 | HIGH-END APPEARANCE FRONT DOOR | $3,000 |
| 7014 | S25 | 0246 | Module - 3EIA | $0 |
| 7014 | S25 | 6665 | Power Cord 3 M (10 ft),Drawer | $19 |
| 9117 | MMA | 5740 | 4-Port 10/100/1000 Base-TX PCI | $1,099 |
| 9119 | FHA | 5740 | 4-Port 10/100/1000 Base-TX PCI | $1,099 |
| Feature conversions | ||||
| Machine type | Model | Part number | Description | One-time charge |
| 8202 | E4B | 820359045908 | Feat conv 5904 to 5908 | $50 |
| 9117 | MMB | 911759045908 | Feat conv 5904 to 5908 | $66 |
| 9179 | MHB | 911759045908 | Feat conv 5904 to 5908 | $66 |
Trademarks
Power Systems, POWER6, POWER7 and Electronic Service Agent are trademarks of IBM Corporation in the United States, other countries, or both.
IBM, Power, Express, BladeCenter, AIX and PartnerWorld are registered trademarks of IBM Corporation in the United States, other countries, or both.
Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service marks of others.
Terms of use
IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at
For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page
