Family 9046+01 IBM DS8880 series flagship - Function Authorizations
IBM United States Sales ManualRevised: August 13, 2019.
| Table of contents | ||||||||||
|
 |
Product life cycle dates |
 |
| Type Model | Announced | Available | Marketing Withdrawn | Service Discontinued |
|---|---|---|---|---|
| 9046-FF8 | 2017/01/10 | 2017/01/10 | - | - |
Back to top
|
|
Abstract |
|
|
The IBM DS8000 series Function Authorizations are for billing purposes only and establish the extent of IBM authorization for use of the licensed functions on an IBM DS8880 (IBM 5331, 5332, 5333, or 5334).
The following Licensed Functions are being introduced:
- 9046 Model FF8:
- Base function license (feature numbers 81xx)
- Copy Services (CS) license (feature numbers 82xx)
- z-synergy Services (zsS) License (feature numbers 83xx)
- Copy Services Manager on Hardware Management Console (HMC) (feature number 84xx)(1)
- 9047 Model FF8:
- Base function license (feature numbers 81xx)
- Copy Services (CS) license (feature numbers 82xx)
- z-synergy Services (zsS) License (feature numbers 83xx)
- Copy Services Manager on HMC (feature number 84xx)(1)
- 9048 Model FF8:
- Base function license (feature numbers 81xx)
- Copy Services (CS) license (feature numbers 82xx)
- z-synergy Services (zsS) License (feature numbers 83xx)
- Copy Services Manager on HMC (feature number 84xx)(1)
- 9049 Model FF8:
- Base function license (feature numbers 81xx)
- Copy Services (CS) license (feature numbers 82xx)
- z-synergy Services (zsS) License (feature numbers 83xx)
- Copy Services Manager on HMC (feature number 84xx)(1)
Machine types 9046, 9047, 9048, and 9049 Model FF8 represent one, two, three, and four years of warranty respectively.
Note: Required to purchase Copy Services Manager (CSM) on HMC license via Passport Advantage before licensed can be activated.
Model abstract 9046-FF8
- IBM DS8000 DS Base Function (feature numbers 81xx)
- IBM DS8000 Copy Services (feature number 82xx)
- IBM DS8000 z-synergy Services (feature number 83xx)
- IBM DS8000 Copy Services Manager on HMC (feature number 84xx)
Back to top
|
|
Highlights |
|
|
Function Authorizations for IBM DS8880 (M/T 904x) All-Flash family are now available as 8xxx feature numbers. IBM DS8000 series Function Authorizations establish the extent of IBM authorization for use of the licensed functions on the IBM DS8880 All Flash family.
The following Licensed Functions are being introduced:
- 9046 Model FF8:
- Base function license (feature numbers 81xx)
- Copy Services (CS) license (feature numbers 82xx)
- z-synergy Services (zsS) License (feature numbers 83xx)
- Copy Services Manager on Hardware Management Console (HMC) (feature number 84xx)(1)
Back to top
|
|
Description |
|
|
The advanced functions offered on DS8880 systems enable simpler and easier configuration. This offering has three advanced functions bundled as shown below.
- Base function license
- Logical configuration support for fixed block
- Operating environment license
- Thin provisioning
- Easy Tier
- I/O Priority Manager
- Copy Services license
- FlashCopy
- Metro Mirror
- Global Mirror
- Metro/Global Mirror
- z/Global Mirror
- z/Global Mirror Resync
- Multiple Target Peer-to-Peer Remote Copy (Multi-Target PPRC)
- z-Sinergy Service license
- Parallel Access Volumes (PAV)
- HyperPAV
- FICON attachment
- High performance FICON
- IBM z/OS Distributed Data Backup
This offering enables customers to order, install, and manage license features in a more efficient manner.
The following licensed functions are available on IBM DS8880 (Machine type 5331, 5332, 5333, and 5334):
Licensed function Description ----------------------------------- ------------------------------------ Base Function (BF) IBM DS8000 Base function Copy Services (CS) IBM DS8000 Copy Services z-synergy Services (zsS) IBM DS8000 z-synergy Services Copy Services Manager on HMC (CSM IBM DS8000 Copy Services Manager on on HMC) HMC
All DS8880 licensed functions are enabled, authorized, managed, activated, and enforced based upon the physical capacity contained in a 533x system. In the context of licensed functions, these terms are defined as follows:
- "533x system" refers to the 533x base unit and all physically
attached 533x expansion units:
- A 533x base unit refers to the Models 984, 985, 986, and 988
- A 533x expansion unit refers to the Models 85E, 86E, and 88E
Enablement refers to the selection of a 533x licensed function indicator feature number to technically activate the associated licensed function.
Authorization refers to the acquisition of a DS8000 series Function Authorization (IBM 904x) feature number to establish the extent of IBM authorization (license size in terms of physical capacity) for use of an associated licensed function. This is also referred to as the authorization level .
Management refers to client use of the Disk Storage Feature Activation (DSFA) application to select the license scope, assign the license value, and deactivate a licensed function.
Activation refers to the client retrieval and installation of the feature activation code into the 533x system. The feature activation code is made available by IBM and obtained using the DSFA application.
Enforcement refers to logic and other technology within the Licensed Machine Code of the 904x to maintain compliance with established IBM authorization levels.
Note: For Copy Services Manager on HMC entitlement, an order of IBM Copy Services Manager 6.x.x (5725-Z54) is required before you can configure Copy Services Manager on HMC on MT 533x on the required capacity. Ensure the number of years for software support and maintenance is purchased is tied to the warranty of the MT 533x. Enablement
Each licensed function is enabled for a 533x system through the selection of the appropriate licensed function indicator feature number on the 533x base unit.
Licensed function Licensed function
indicator
----------------------------------------- -------------------------
Base Function (BF) 904x feature numbers 81xx
Copy Services (CS) 904x feature numbers 82xx
z-synergy Services (zsS) 904x feature numbers 83xx
Copy Services Manager on HMC (CSM on HMC) 904x feature numbers 84xx
Each licensed function indicator feature selected on a 533x base unit enables that function at the system level. These features are not selected on any attached 533x expansion units.
Authorization
The extent of IBM authorization for the use of a licensed function on a 533x system is established by acquiring 904x function authorization models and feature numbers for the 533x base unit.
Licensed function Function authorization
----------------------------------- ------------------------------------
Base Function (BF) 904x Model FF8 feature number
8151-8160
Copy Services (CS) 904x Model FF8 feature number
8250-8260
z-synergy Services (zsS) 904x Model FF8 feature number
8350-8360
Copy Services Manager on HMC (CSM 904x Model LF8 feature number
on HMC) 8450-8460
Each function authorization acquired for a 533x base unit establishes the authorization level for the 533x system. For example, a system with models 985 and 85E expansion units requires only one Base Function (BF) (904x Model FF8 feature numbers 8xxx) function authorization. The authorization levels established by acquiring one or more function authorizations for the Models 98x must also cover the physical capacity of the attached Model 8xE expansion units.
The authorization level provided by each feature number is stated within the feature number description. The unit represents physical capacity, where a terabyte (TB) equals one trillion bytes. A 904x system's total authorization level for a given licensed function is the sum of the units (TB) associated with all the acquired feature numbers.
The function authorization are based on the capacity range and tier as shown below:
Tier Min. Max. Tier TB Feature Range Feature
(TB) (TB) granularity Quantity delta number
(max.) (TB)
---- ---- ------ ----------- -------- ----- -------
1 1 100 10 10 100 8x51
2 101 250 15 10 150 8x52
3 251 500 25 10 250 8x53
4 501 1250 75 10 750 8x54
5 1251 3000 175 10 1750 8x55
6 3001 6000 300 10 3000 8x56
7 6001 10000* 500 8 4000 8x60
Note: * The maximum (TB) for Copy Services Manager on HMC is 100,000
Management
Licensed functions are managed using the DSFA application.
To access DSFA, you will be required to enter information about your 533x machine. You can find this information on the Storage Unit General Properties page in the IBM DS8000 Storage Manager application.
Management activities include:
- Selection of a license scope
- Assignment of a license value
- Deactivation of a licensed function
License scope: Licensed functions are activated and enforced within a defined license scope. License scope refers to the type of storage, and therefore the type of servers, that the function can be used with.
- Fixed Block (FB): This function can be used only with data from Fibre Channel-attached servers.
- Count Key Data (CKD): The function can be used only with data from FICON-attached servers.
- Both FB and CKD (ALL): The function can be used with data from all attached servers.
Select licensed functions have multiple license scope options, while other functions have only a single license scope.
Licensed function License
scope
options
----------------------------------------- -------
Base Function (BF) FB, ALL
Copy Services (CS) FB, ALL
z-synergy Services (zsS) CKD
Copy Services Manager on HMC (CSM on HMC) FB, ALL
If a licensed function has multiple license scope options, you will be required to select a license scope during the initial retrieval of the feature activation code. This activity is performed using the DSFA application.
The license scope is not selected while ordering function authorization feature numbers. The feature numbers only establish the extent of IBM authorization in terms of physical capacity, regardless of the storage type.
You can also change the license scope using the DSFA application after a licensed function has been activated. A new feature activation code will be generated and when you install it into the machine, the function will be activated and enforced using the newly selected license scope. Only an increase in the license scope (changing FB or CKD to ALL) is a concurrent activity. A lateral change (changing FB to CKD or changing CKD to FB) or a reduction of the license scope (changing ALL to FB or CKD) is a disruptive activity and requires a machine IML.
License value: Licensed functions are activated and enforced based upon an assigned license value.
License value refers to extent of IBM authorization and is referenced as physical capacity (TB).
On Models 98x, license value assignment is an optional activity that can be perform using the DSFA application.
On these models, the feature activation codes will always be generated using the total license value for each licensed function, unless a license value of zero (0.0 TB) has been assigned.
Deactivation: Assigning a license value of zero (0.0 TB) provides the ability to deactivate (disable) a licensed function. A new feature activation code will be generated and when installed into the machine, the function will be deactivated during the next IML of the machine.
A deactivated licensed function can be reactivated by changing the license value to a non-zero value. A new feature activation code will be generated and when installed into the machine, the function will be activated. Reactivation is a concurrent activity.
When a licensed function is deactivated using the DSFA application, the installed function authorization feature numbers remain on the machine record. The function authorization feature numbers do not need to be reacquired to reactivate the licensed function at a future date.
Activation
Licensed functions are activated by the installation of feature activation codes into the 533x system. The feature activation codes are made available by IBM and are obtained using the DSFA application.
Enforcement
The 533x Licensed Machine Code contains logic and other technology to maintain compliance with established authorization levels. The physical capacity for each storage type can be logically configured up to the given authorization level. If there are multiple licensed functions with the same license scope, the extent of IBM authorization is defined by the licensed function with the lowest license value.
Sub-capacity licensing requires capacity monitoring and remote connection.
Pricing examples
The following examples are provided to illustrate your Copy Services (CS) licensing requirements on FB environment:
Scenario 1
To flashcopy on the 10 TB source, the purchase of 20 TB of capacity for CS license is required.
Scenario 2
To Metro Mirror on a source 10 TB and then a single flashcopy on the target 10 TB, the purchase of 10 TB of CS license on the source and the purchase of 20 TB of CS on the target is required.
Scenario 3
To Global Mirror on a source 10 TB and then a single flashcopy on the target 10 TB, the purchase of 10 TB of CS license on the source and the purchase of 20 TB of CS on the target is required.
Scenario 4
To Metro Global Mirror on a source 10 TB and then a single flashcopy on the target 10 TB, the purchase of 10 TB of CS license on the source and secondary, and the purchase of 20 TB of CS on the target is required.
Scenario 5
To zGM/XRC 10 TB, the purchase of 10 TB and 10 TB of capacity for CS license on source and target respectively is required.
Scenario 6
To perform four site replications, the purchase of the appropriate capacity license requirement for each box is required.
Accessibility by people with disabilities
A US Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be found on the IBM Accessibility website.
Section 508 of the US Rehabilitation Act
The IBM System Storage DS8000 series Function Authorizations are capable as of January 10, 2017, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A US Section 508 Voluntary Product Accessibility Template (VPAT) can be found on the IBM Accessibility website.
Back to top
|
|
Models |
|
|
Model summary matrix
| Model | Feature Description | Feature number range |
|---|---|---|
| FF8 | Base Function | #8151-8160 |
| FF8 | Copy Services | #8250-8260 |
| FF8 | z-synergy Services | #8350-8360 |
| FF8 | Copy Services Manager on HMC | #8450-8460 |
Customer setup (CSU)
Yes.
Devices supported
IBM DS8880 (Machine Types 5331, 5332, 5333, and 5334).
Model conversions
Not available.
Back to top
|
|
Technical description |
|
|
Physical specifications |
Operating environment |
Limitations |
|
Hardware requirements |
Software requirements |
Guidelines for Determining the Required Extent of IBM Authorization
The required authorization level depends upon the license scope:
- If the license scope is FB, the authorization level must be equal to or greater than the total amount of physical capacity within the system that will be logically configured as FB
- If the license scope is CKD, the authorization level must be equal to or greater than the total amount of physical capacity within the system that will be logically configured as CKD
- If the license scope is ALL, the authorization level must be equal to or greater than the total system physical capacity
Refer to the IBM DS8880 introduction and Planning Guide (GC27-8525) for physical capacity calculation guidelines.
Ordering Instructions
Configurator use: Use of the configurator is mandatory for all DS8000 series Function Authorization orders (plant and field install).
The DS8000 series Function Authorizations must be configured and ordered with the DS8880 machine as a "533x system". For ordering purposes, a 533x system consists of:
- DS8880 base unit (533x Models 98x)
- One or more DS8880 Expansion Units (533x Models 8xE) that will be physically attached to the base unit
- DS8000 series Function Authorizations (904x Model FF8)
Failure to configure and order these components as a system can result in the creation and shipment of incorrect or incomplete configurations since multi-model configuration rules and cross-model feature number corequisites cannot be validated.
Field upgrades must also be configured and ordered against the 533x system.
DS8000 series licensed functions: Licensed functions require the selection of a DS8880 feature number (IBM 533x) and the acquisition of DS8000 series Function Authorization (IBM 904x) feature numbers:
- The 533x licensed function indicator feature number enables the technical activation of the function subject to the client applying a feature activation code made available by IBM
- The 904x function authorization feature numbers establish the extent of IBM authorization for that function on the 533x machine for which it was acquired
Licensed function IBM 533x IBM 904x Function
Indicator Authorization Models
Feature and Feature Numbers
Number
-------------------------------------- --------- -----------------------
Base Function (BF) 81xx Model FF8 feature
number 8151-8160
Copy Services (CS) 82xx Model FF8 feature
number 8250-8260
z-synergy Services (zsS) 83xx Model FF8 feature
number 8350-8360
Copy Services Manager on HMC (CSM on 84xx Model LF8 feature
HMC) number 8450-8460
The following process must be used for all licensed functions orders (initial orders or upgrades):
- The 9046 function authorizations must:
- Be linked to the 5331 base unit model (a CPU/SIU) during order entry
- Be assigned a System Type of 5331
- Have the unique System Number of the 5331 base unit model for which they are being ordered
- The 5331 base unit model and linked 9046 model on the order must
have the same:
- System Number
- Scheduling Link Number
- Customer-Requested Arrival Date (CRAD)
- The 9047 function authorizations must:
- Be linked to the 5332 base unit model (a CPU/SIU) during order entry
- Be assigned a System Type of 5332
- Have the unique System Number of the 5332 base unit model for which they are being ordered
- The 5332 base unit model and linked 9047 model on the order must
have the same:
- System Number
- Scheduling Link Number
- Customer-Requested Arrival Date (CRAD)
- The 9048 function authorizations must:
- Be linked to the 5333 base unit model (a CPU/SIU) during order entry
- Be assigned a System Type of 5333
- Have the unique System Number of the 5333 base unit model for which they are being ordered
- The 5333 base unit model and linked 9048 model on the order must
have the same:
- System Number
- Scheduling Link Number
- Customer-Requested Arrival Date (CRAD)
- The 9049 function authorizations must:
- Be linked to the 5334 base unit model (a CPU/SIU) during order entry
- Be assigned a System Type of 5334
- Have the unique System Number of the 5334 base unit model for which they are being ordered
- The 5334 base unit model and linked 9049 model on the order must
have the same:
- System Number
- Scheduling Link Number
- Customer-Requested Arrival Date (CRAD)
System Machine Model CPU Product System
type or identity type
I/O
-------- ------- ----- --- -------- ------
5331-984 5331 984 CPU 0 5331
9046 FF8 I/O 2 5331
5332-984 5332 984 CPU 0 5332
9047 FF8 I/O 2 5332
5333-984 5333 984 CPU 0 5333
9048 FF8 I/O 2 5333
5334-984 5334 984 CPU 0 5334
9049 FF8 I/O 2 5334
5331-985 5331 985 CPU 0 5331
9046 FF8 I/O 2 5331
5332-985 5332 985 CPU 0 5332
9047 FF8 I/O 2 5332
5333-985 5333 985 CPU 0 5333
9048 FF8 I/O 2 5333
5334-985 5334 985 CPU 0 5334
9049 FF8 I/O 2 5334
5331-986 5331 986 CPU 0 5331
9046 FF8 I/O 2 5331
5332-986 5332 986 CPU 0 5332
9047 FF8 I/O 2 5332
5333-986 5333 986 CPU 0 5333
9048 FF8 I/O 2 5333
5334-986 5334 986 CPU 0 5334
9049 FF8 I/O 2 5334
5331-988 5331 988 CPU 0 5331
9046 FF8 I/O 2 5331
5332-988 5332 988 CPU 0 5332
9047 FF8 I/O 2 5332
5333-988 5333 988 CPU 0 5333
9048 FF8 I/O 2 5333
5334-988 5334 988 CPU 0 5334
9049 FF8 I/O 2 5334
Failure to follow this process will result in an ordering error, and incorrectly placed orders will not be processed by the plant. Incorrect orders include:
- Failure to link the 904x function authorization to the 533x machine order
- Ordering of a 904x function authorization feature number without an order for the corequisite 533x licensed function indicator feature number
- Specification of the 533x licensed function indicator feature number without an order for the corequisite 904x function authorization feature number
- Use of System Type 9998
License upgrades: The extent of IBM authorization for an enabled licensed function is increased by acquiring additional 904x function authorization feature numbers. The feature numbers can be ordered in any sequence or combination.
License deactivation: A licensed function is deactivated (removed) by ordering 904x function authorization feature number 8x50. When feature number 8x50 is ordered, all other 8xxx feature numbers on the 904x function authorization model must be removed. Additionally, the corresponding 533x licensed function indicator feature number must also be removed. No refund or credit is provided to the client when the 8xxx feature numbers are removed.
Alternatively, a client can deactivate a licensed function using the Disk Storage Feature Activation (DSFA) application.
When the client deactivates a licensed function using DSFA, the installed 533x licensed function indicator feature number and 904x function authorization feature numbers remain on the machine record. Using DSFA, the client can also reactivate the licensed function at a future date without the need to reacquire the 904x function authorization feature numbers.
Regardless of which method is used, deactivation of a licensed function is a disruptive activity and requires a machine IML (Models 98x).
Licensed Function Management and Activation
Licensed function management and activation is a client responsibility.
- Management refers to use of the Disk Storage Feature Activation (DSFA) application to select the license scope and assign the license value.
- Activation refers to the retrieval and installation of the feature activation code into the 533x system. The feature activation code is made available by IBM and obtained using the DSFA application.
These activities are the client's responsibility at the initial activation of a licensed function and when the extent of IBM authorization is increased.
DSFA Application: To access DSFA , the client will be required to enter information about the 904x machine. This information can be found on the Storage Unit General Properties page in the IBM System Storage DS8000 Storage Manager application.
IBM employees can also access the DSFA application using this URL. However, when doing so, 533x machine information is required, including the machine signature. The machine signature is a unique identifier for each machine and can only be found on Storage Unit General Properties page in the IBM System Storage DS8000 Storage Manager application.
Alternatively, IBM employees can access the DSFA application from the CRM WorkSmart home page. When DSFA is accessed in this method, the entry of the machine signature is optional. When a machine signature is not entered, access to DSFA is limited to read-only authority.
Physical specifications
Operating environment
Limitations
- Conversion between machine types is not supported.
- The intermix of models and features between machine types is not supported. For example, intermixing of machine type 9046 Model FF8 and machine type 9048 Model FF8 is not supported.
- The amount of physical capacity within a 533x system that can be logically configured for use will be enforced by the 533x Licensed Machine Code to maintain compliance with the extent of IBM authorization established for licensed functions activated on the machine. The 533x Licensed Machine Code will not allow the logical configuration of physical capacity beyond the extent of IBM authorization.
- A lateral change or reduction in the license scope is a disruptive
activity and requires a machine IML (Model 98x).
- A lateral change is defined as changing the license scope from FB to CKD or from CKD to FB.
- A reduction is defined as changing the license scope from ALL to FB or from ALL to CKD.
- The deactivation of an activated licensed function occurs at the next machine IML (Model 98x).
Hardware requirements
Each DS8000 series Function Authorization (IBM 904x) establishes the extent of IBM authorization for one or more licensed functions acquired for an IBM DS8880 (IBM 533x). Each 904x function authorization is applicable only for the specific 533x machine (by serial number) for which it was acquired and is not transferable to another serial numbered 533x machine.
Each 904x function authorization requires a corequisite licensed function indicator feature number on the 533x machine for which it was acquired:
Licensed function IBM 533x IBM 904x Function
Indicator Authorization Models
Feature and feature numbers
number
-------------------------------------- --------- -----------------------
Base Function (BF) 81xx Model FF8 feature
number 8151-8160
Copy Services (CS) 82xx Model FF8 feature
number 8250-8260
z-synergy Services (zsS) 83xx Model FF8 feature
number 8350-8360
Copy Services Manager on HMC (CSM on 84xx 904x Model LF8 feature
HMC) number 8450-8460
A minimum of 10 TB unit Base Function (BF) license is required on every 533x base unit (Model 98x). The extent of IBM authorization acquired through the 904x Model FF8 feature numbers must cover the physical capacity for each acquired drive set of the 533x system, where system is defined as the base unit and all physically attached expansion units.
Feature Description Corequisite ------- ---------------------------------- ----------------------- 8151 BF - Up to 100 TB capacity Model FF8 feature #8151 8152 BF - 100.1 TB to 250 TB capacity Model FF8 feature #8152 8153 BF - 250.1 TB to 500 TB capacity Model FF8 feature #8153 8154 BF - 500.1 TB to 1250 TB capacity Model FF8 feature #8154 8155 BF - 1250.1 TB to 3000 TB capacity Model FF8 feature #8155 8156 BF - 3000.1 TB to 6000 TB capacity Model FF8 feature #8156 8160 BF - 6000.1 TB to 12000 TB Model FF8 feature #8160
The physical capacity for base function licenses (Model FF8 feature numbers 8151-8160) are required. This is required for the base function and for a valid system configuration.
The number of TB unit base function license feature activation code can be retrieved and activated by using the DSFA application. The capacity of the storage system for base function licenses are mainly a pricing mechanism, so there will not be any feature activation code to be retrieved and activated by using the DSFA application.
If the base function license has not been acquired and activated on the machine, disk drives installed within the 533x system cannot be logically configured for use. Upon activation of the base function, disk drives can be logically configured up to the extent of IBM authorization.
As additional disk drives are installed, the extent of IBM authorization must be increased by acquiring additional 904x Model FF8 feature numbers. Otherwise, the additional disk drives cannot be logically configured for use.
Software requirements
Not applicable.
Back to top
|
|
Publications |
|
|
No publications are shipped with the DS8000 series Function Authorizations.
To access the IBM Publications Center Portal, go to the IBM Publications Center website.
The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. A large number of publications are available online in various file formats, which can currently be downloaded.
Back to top
|
|
Features |
|
|
|
Features - No charge |
Features - Chargeable |
Feature descriptions |
Features - No charge
Description Machine Model Feature
type number
-------------------------------------------------- ------- ----- -------
DS8000 series Function Authorization 9046 FF8
Administrative indicators:
IBM/Openwave Alliance indicator 9046 FF8 0930
IBM System i indicator 9046 FF8 0931
IBM System p indicator 9046 FF8 0932
IBM System x indicator 9046 FF8 0933
IBM System z indicator 9046 FF8 0934
IBM System z B/C indicator 9046 FF8 0935
IBM System zEnterprise Cloud indicator 9046 FF8 0936
Linux indicator 9046 FF8 0940
IBM ProtecTIER indicator 9046 FF8 0960
IBM Storwize V7000 indicator 9046 FF8 0961
IBM N series indicator 9046 FF8 0962
IBM SAN Volume Controller indicator 9046 FF8 0963
IBM/EPIC indicator 9046 FF8 0964
VMware VAAI indicator 9046 FF8 0965
OpenStack indicator 9046 FF8 0966
US TAA compliance indicator 9046 FF8 0983
Copy Services (CS) license:
CS - Inactive 9046 FF8 8250
z-synergy Services (zsS) license:
zsS - Active 9046 FF8 8300
zsS - Inactive 9046 FF8 8350
Copy Services Manager on HMC (CSM on HMC )
license:
- CSM on HCM - Inactive 9046 FF8 8450
- CSM on HMC - Up to 100 TB capacity 9046 FF8 8451
- CSM on HMC - 100.1 TB to 250 TB capacity 9046 FF8 8452
- CSM on HMC - 250.1 TB to 500 TB capacity 9046 FF8 8453
- CSM on HMC - 500.1 TB to 1250 TB capacity 9046 FF8 8454
- CSM on HMC - 1250.1 TB to 3000 TB capacity 9046 FF8 8455
- CSM on HMC - 3000.1 TB to 6000 TB capacity 9046 FF8 8456
- CSM on HMC - 6000.1 TB to 100,000 TB 9046 FF8 8460
Features - Chargeable
Description Machine Model Feature
type number
------------------------------------ ------- ----- -------
DS8000 series Function Authorization 9046 FF8
Base Function (BF):
BF - Up to 100 TB capacity 9046 FF8 8151
BF - 100.1 TB to 250 TB capacity 9046 FF8 8152
BF - 250.1 TB to 500 TB capacity 9046 FF8 8153
BF - 500.1 TB to 1250 TB capacity 9046 FF8 8154
BF - 1250.1 TB to 3000 TB capacity 9046 FF8 8155
BF - 3000.1 TB to 6000 TB capacity 9046 FF8 8156
BF - 6000.1 TB to 12000 TB 9046 FF8 8160
Copy Services (CS) license:
CS - Up to 100 TB capacity 9046 FF8 8251
CS - 100.1 TB to 250 TB capacity 9046 FF8 8252
CS - 250.1 TB to 500 TB capacity 9046 FF8 8253
CS - 500.1 TB to 1250 TB capacity 9046 FF8 8254
CS - 1250.1 TB to 3000 TB capacity 9046 FF8 8255
CS - 3000.1 TB to 6000 TB capacity 9046 FF8 8256
CS - 6000.1 TB to 10000 TB 9046 FF8 8260
z-synergy Services (zsS) license:
zsS - Up to 100 TB capacity 9046 FF8 8351
zsS - 100.1 TB to 250 TB capacity 9046 FF8 8352
zsS - 250.1 TB to 500 TB capacity 9046 FF8 8353
zsS - 500.1 TB to 1250 TB capacity 9046 FF8 8354
zsS - 1250.1 TB to 3000 TB capacity 9046 FF8 8355
zsS - 3000.1 TB to 6000 TB capacity 9046 FF8 8356
zsS - 6000.1 TB to 10000 TB 9046 FF8 8360
Feature descriptions
The following features go into new Sales Manual pages for Machine types 9046, 9047, 9048, and 9049. The features are all the same for the Model FF8 on Machine types 9046, 9047, 9048, and 9049.
Features - No charge
(#0930) IBM/Openwave alliance indicator
This feature indicates the order is included in sales activity associated with the IBM/Openwave strategic alliance. It is for administrative purposes only.
This feature should be used with both plant and MES order activity.
- Minimum required: None
- Maximum allowed: 99
- Corequisites: None
- Limitations: None
- Plant install / field install: Both
(#0931 - #0936) IBM attachment indicators
Feature Description ------- -------------------------------------- 0931 IBM System i indicator 0932 IBM System p indicator 0933 IBM System x indicator 0934 IBM System z indicator 0935 IBM System z Business Class indicator 0936 IBM System zEnterprise Cloud indicator
These features indicate the function authorization applies to a machine that will be used in a particular IBM environment. They are for administrative purposes only and do not affect the technical capabilities of the machine.
All applicable features should be specified.
- Minimum required: None
- Maximum allowed: One per feature number
- Corequisites: None
- Limitations: None
- Plant install / field install: Both
(#0940) Linux indicator
This feature indicates the function authorization applies to a machine that will be used in a Linux environment (that is, will be attached to servers running the Linux operating system). It is for administrative purposes only and does not affect the technical capabilities of the machine.
- Minimum required: None
- Maximum allowed: One
- Corequisites: None
- Limitations: None
- Plant install / field install: Both
(#0960 - #0963) IBM Storage indicators
Feature Description ------- ----------------------------------- 0960 IBM ProtecTIER indicator 0961 IBM Storwize V7000 indicator 0962 IBM N series indicator 0963 IBM SAN Volume Controller indicator
These features indicate the machine will be attached with other IBM Storage configurations. They are for administrative purposes only and do not affect the technical capabilities of the machine.
- Minimum required: None
- Maximum allowed: One per feature number
- Corequisites: None
- Limitations: None
- Plant install / field install: Both
(#0964) IBM/EPIC indicator
Feature Description ------- -------------------------------------------------- 0964 IBM/EPIC indicator (for EPIC software environment)
This feature indicates the order is included in sales activity associated with the IBM/EPIC software environment. It is for administrative purposes only.
This feature should be used with both plant and MES order activity.
- Minimum required: None
- Maximum allowed: 99
- Corequisites: None
- Limitations: None
- Plant install / field install: Both
(#0965) VMware VAAI indicator
Feature Description ------- --------------------- 0965 VMware VAAI indicator
This feature indicates the machine will be used in a VMware VAAI support environment. It is for administrative purposes only and does not affect the technical capabilities of the machine.
- Minimum required: None
- Maximum allowed: One
- Corequisites: None
- Limitations: None
- Plant install / field install: Both
(#0966) OpenStack indicator
This feature indicates the machine will be used with OpenStack software driver support for cloud environments. It is for administrative purposes only and does not affect the technical capabilities of the machine.
- Minimum required: None
- Maximum allowed: One
- Corequisites: None
- Limitations: None
- Plant install / field install: Both
(#0983) US TAA compliance indicator
This optional feature is for the US Government customers and customers ordering on behalf of the US Government. When used, it provides the DS8000 as a TAA compliant system. It should not be used except where bids or customers require TAA compliance and orders with this feature number will be reviewed for relevance. The maximum order quantity for this feature is one and is for initial plant order only.
- Minimum required: 0
- Maximum allowed: 1
- Prerequisites: None
- Corequisites: None, but a post-configuration/order review will be made to ensure TAA compliance is required
- Compatibility conflicts: None
- Customer setup: No
- Limitations: None
- Plant / Field installable: Plant only
- Cable order: None
- Comments: This feature should be added automatically by e-config if the hardware MT associated (242x, 283x, 533x) contains feature 0983
(#82xx) Copy Services (CS) License
Feature Description ------- ------------- 8250 CS - Inactive
This feature indicates Copy Services are inactive.
- Minimum required: One for feature #8250 if #8251-#8260 are not selected
- Maximum allowed: One
- Corequisites: None
- Limitations:
- Feature #8250 is not compatible with features #8251 to #8260. When adding feature #8250, all other #82xx features must be removed.
- Feature #8250 is only compatible with IBM 533x feature #8250
- Feature #8250 is not compatible with IBM 533x features #08xx
- Customer Setup: Yes
- Plant install / field install: Both
(#83xx) z-synergy Services (zsS) License
Feature Description ------- -------------- 8300 zsS - Active 8350 zsS - Inactive
These features indicate if z-sinergy Services are either active or inactive.
- Minimum required: One for feature #8350 if #8351-#8360 are not selected
- Maximum allowed:
- Feature #8300: One for feature #8351-#8360 is selected
- Feature #8350: One
- Corequisites: None
- Limitations:
- Feature #8350 is not compatible with features #8351 to #8360. When adding feature #8350, all other #83xx features must be removed.
- Feature #8350 is only compatible with IBM 533x feature #8350
- Feature #8350 is not compatible with IBM 533x feature #08xx
- Customer Setup: Yes
- Plant install / field install: Both
(#84xx) Copy Services Manager on HMC (CSM on HMC) License
(#8450, #8452-6, #8460)
(No Longer Available as of June 16, 2017)
Feature Description ------- ---------------------- 8450 CSM on HMC -- Inactive
This feature indicates Copy Services Manager on HCM are inactive.
- Minimum required: None
- Maximum allowed: One
- Corequisites: None
- Limitations:
- Feature #8450 is not compatible with features #8451 to #8460. When adding feature #8450, all other #82xx features must be removed.
- Feature #8450 is only compatible with IBM 533x feature #8450
- Feature #8450 is not compatible with IBM 533x features #08xx
- Customer Setup: Yes
- Plant install / field install: Both
Feature Description ------- --------------------------------------------------------------- 8451 CSM on HMC - Up to 100 TB capacity (10 TB per feature) 8452 CSM on HMC - 100.1 TB to 250 TB capacity (15 TB per feature) 8453 CSM on HMC - 250.1 TB to 500 TB capacity (25 TB per feature) 8454 CSM on HMC - 500.1 TB to 1250 TB capacity (75 TB per feature) 8455 CSM on HMC - 1250.1 TB to 3000 TB capacity (175 TB per feature) 8456 CSM on HMC - 3000.1 TB to 6000 TB capacity (300 TB per feature) 8460 CSM on HMC - 6000.1 TB to 100,000 TB (500 TB per feature)
These features establish the extent of IBM authorization for the use of the DS8000 Copy Services Manager on HMC on a specific 533x machine.
These features include functionalities for all copy services and copy services manager that offers the same capabilities and support provided by the replication portion of IBM Tivoli Storage Productivity Center.
This licensed function is authorized on the basis of logical capacity and has a license scope of FB, CKD, or ALL.
- If the license scope is FB, the total authorization level must be equal to or lesser than the total amount of logical capacity within the system that will be logically configured as FB
- If the license scope is CKD, the total authorization level must be equal to or lesser than the total amount of logical capacity within the system that will be logically configured as CK
- If the license scope is ALL, the total authorization level must be equal to or lesser than the total system logical capacity
The authorization level provided by each feature number is stated within the feature number description. The capacity tier represents logical capacity, where a terabyte (TB) equals one trillion bytes.
The total authorization level for this licensed function is the sum of the capacity (terabytes) numbers associated with the purchased capacity.
These features can be ordered when additional licenses are required, with the exception of feature #8450 (see limitations below).
The extent of IBM authorization is increased by ordering additional capacity.
- Minimum required: None
- Maximum allowed:
- Feature #8451: 10 (each quantity represent per 10 TB)
- Feature #8452 : 10 (each quantity represent per 15 TB)
- Feature #8453 : 10 (each quantity represent per 25 TB)
- Feature #8454 : 10 (each quantity represent per 75 TB)
- Features #8455 : 10 (each quantity represent per 175 TB)
- Features #8456 : 10 (each quantity represent per 300 TB)
- Features #8460 : 200 (each quantity represent per 500 TB)
- Corequisites: Features #8451 to #8460 require the same IBM 533x indicator features #8451 to #8460 and indicator feature #08xx to be ordered
- Limitations:
- Feature #8450 is not compatible with features #8451 to #8460. When adding feature #8450, all other #84xx features must be removed.
- Features #8451 to #8460 are not compatible with feature #8450. When adding features #8451 to #8460, feature #8450 must be removed.
- Customer Setup: Yes
- Plant install / field install: Both
Features - Chargeable
(#81xx) Base Function (BF) License
Feature Description ------- ------------------------------------------------------- 8151 BF - Up to 100 TB capacity (10 TB per feature) 8152 BF - 100.1 TB to 250 TB capacity (15 TB per feature) 8153 BF - 250.1 TB to 500 TB capacity (25 TB per feature) 8154 BF - 500.1 TB to 1250 TB capacity (75 TB per feature) 8155 BF - 1250.1 TB to 3000 TB capacity (175 TB per feature) 8156 BF - 3000.1 TB to 6000 TB capacity (300 TB per feature) 8160 BF - 6000.1 TB to 12000 TB (500 TB per feature)
These features establish the extent of IBM authorization for the use of the IBM DS Base Function on a specific 904x machine.
This licensed function is authorized on the basis of physical capacity and has a license scope of FB, ALL. The total authorization level must be equal to or greater than the total system physical capacity.
The authorization level provided by each feature number is stated within the feature number description. The unit represents physical capacity, where a terabyte (TB) equals one trillion bytes.
The total authorization level for this licensed function is the sum of the capacity (terabytes) numbers associated with the whole storage system.
This licensed function is authorized on the basis of total capacity required for storage system and has a license scope of FB, ALL. The total authorization level must be equal to or greater than the total system capacity required for the total number of each acquired drive sets.
The number of TB for base function license feature activation code can be retrieved and activated by using the DSFA application. The different tier of capacity base function licenses are mainly a pricing mechanism, so there will not be any feature activation code to be retrieved and activated by using the DSFA application.
The extent of IBM authorization is increased by ordering additional capacity.
This is a required licensed function for every 533x system.
- Minimum required: None
- Maximum allowed:
- Feature #8151: 10 (each quantity represent per 10 TB)
- Features #8152 : 10 (each quantity represent per 15 TB)
- Features #8153 : 10 (each quantity represent per 25 TB)
- Features #8154 : 10 (each quantity represent per 75 TB)
- Features #8155 : 10 (each quantity represent per 175 TB)
- Features #8156 : 10 (each quantity represent per 300 TB)
- Features #8160 : 12 (each quantity represent per 500 TB)
- Corequisites: Features #8151 to #8160 require the same IBM 533x indicator features #8151 to #8160 and indicator feature #08xx to be ordered
- Limitations: None
- Customer Setup: Yes
- Plant install / field install: Both
(#82xx) Copy Services (CS) License
Feature Description ------- ------------------------------------------------------- 8251 CS - Up to 100 TB capacity (10 TB per feature) 8252 CS - 100.1 TB to 250 TB capacity (15 TB per feature) 8253 CS - 250.1 TB to 500 TB capacity (25 TB per feature) 8254 CS - 500.1 TB to 1250 TB capacity (75 TB per feature) 8255 CS - 1250.1 TB to 3000 TB capacity (175 TB per feature) 8256 CS - 3000.1 TB to 6000 TB capacity (300 TB per feature) 8260 CS - 6000.1 TB to 10000 TB (500 TB per feature)
These features establish the extent of IBM authorization for the use of the DS8000 copy service on a specific 533x machine.
These features include functionalities like flashcopy, Metro-Mirror, Global Mirror, Metro Global Mirror, Remote Mirror for z/OS, Remote Mirror for z/OS Global Mirror Incremental Resync, and Multi-target PPRC.
This licensed function is authorized on the basis of usable capacity and has a license scope of FB, CKD, or ALL.
- If the license scope is FB, the total authorization level must be equal to or lesser than the total amount of capacity within the system that will be logically configured as FB
- If the license scope is CKD, the total authorization level must be equal to or lesser than the total amount of capacity within the system that will be logically configured as CK
- If the license scope is ALL, the total authorization level must be equal to or lesser than the total system capacity
The authorization level provided by each feature number is stated within the feature number description. The capacity tier represents physical capacity, where a terabyte (TB) equals one trillion bytes.
The total authorization level for this licensed function is the sum of the capacity (terabytes) numbers associated with the purchased capacity.
These features can be ordered when additional licenses are required, with the exception of feature #8250 (see limitations below).
The extent of IBM authorization is increased by ordering additional capacity.
- Minimum required: None
- Maximum allowed:
- Feature #8251: 10 (each quantity represent per 10 TB)
- Feature #8252 : 10 (each quantity represent per 15 TB)
- Feature #8253 : 10 (each quantity represent per 25 TB)
- Feature #8254 : 10 (each quantity represent per 75 TB)
- Features #8255 : 10 (each quantity represent per 175 TB)
- Features #8256 : 10 (each quantity represent per 300 TB)
- Features #8260 : 8 (each quantity represent per 500 TB)
- Corequisites: Features #8251 to #8260 require the same IBM 533x indicator features #8251 to #8260 and indicator feature #08xx to be ordered
- Limitations:
- Feature #8250 is not compatible with features #8251 to #8260. When adding feature #8250, all other #82xx features must be removed.
- Features #8251 to #8260 are not compatible with feature #8250. When adding features #8251 to #8260, feature #8250 must be removed.
- Customer Setup: Yes
- Plant install / field install: Both
(#83xx) z-synergy Services (zsS) License
Feature Description ------- ------------------------------------------------ 8351 zsS - Up to 100 TB capacity 8352 zsS - 100.1 TB to 250 TB capacity 8353 zsS - 250.1 TB to 500 TB capacity 8354 zsS - 500.1 TB to 1250 TB capacity 8355 zsS - 1250.1 TB to 3000 TB capacity 8356 zsS - 3000.1 TB to 6000 TB capacity 8360 zsS - 6000.1 TB to 10000 TB (500 TB per feature)
These features establish the extent of IBM authorization for the use of the z-synergy bundle on a specific 533x machine.
These features include functionality like Remote Mirror for z/OS, Remote Mirror for z/OS Global Mirror Incremental Resync, FICON attachment, High Performance FICON for System z, Parallel Access Volumes, z/OS Distributed Data Backup (zDDB), and HyperPAV.
This licensed function, except zDDB, is authorized on the basis of usable capacity and has a license scope of CKD. The total authorization level must be equal to or lesser than the total amount of capacity within the system that will be logically configured as CKD.
This licensed zDDB function is authorized on the basis of usable capacity and has a license scope of FB. The total authorization level must be equal to or lesser than the total amount of capacity within the system that will be logically configured as CKD.
The authorization level provided by each feature number is stated within the feature number description. The capacity tier represents physical capacity, where a terabyte (TB) equals one trillion bytes.
The total authorization level for this licensed function is the sum of the capacity (terabytes) numbers associated with the purchased capacity.
These features can be ordered when additional licenses are required, with the exception of feature #8350 (see limitations below).
The extent of IBM authorization is increased by ordering additional capacity.
- Minimum required: None
- Maximum allowed:
- Feature #8351: 10 (each quantity represent per TB)
- Feature #8352 : 10 (each quantity represent per TB)
- Feature #8353 : 10 (each quantity represent per TB)
- Feature #8354 : 10 (each quantity represent per TB)
- Features #8355 : 10 (each quantity represent per TB)
- Features #8356 : 10 (each quantity represent per TB)
- Features #8360 : 8 (each quantity represent per TB)
- Corequisites: Features #8351 to #8360 require the same IBM 533x indicator features #8351 to #8360 and indicator feature #08xx to be ordered
- Limitations:
- Feature #8350 is not compatible with features #8351 to #8360. When adding feature #8350, all other #83xx features must be removed.
- Feature #8350 is only compatible with IBM 533x feature #8350
- Feature #8350 is not compatible with IBM 533x feature #08xx
- Features #8351 to #8260 are not compatible with feature #8250. When adding features #8351 to #8360, feature #8350 must be removed.
- Customer Setup: Yes
- Plant install / field install: Both
Back to top
|
|
Accessories |
|
|
None.
Customer replacement parts
None.
Back to top
|
|
Supplies |
|
|
None.
Supplemental media
None.
Back to top
|
|
Trademarks |
|
|
(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Terms of use
IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this Sales Manual at any time without notice. This Sales Manual is provided for your information only. Additional terms of use are located at
|
© IBM Corporation 2019.