Family 4662+01 IBM FlashSystem 5200

IBM Europe Sales Manual
Revised: June 21, 2022


Table of contents
Product life cycle datesProduct life cycle datesTechnical descriptionTechnical description
AbstractAbstractPublicationsPublications
HighlightsHighlightsFeaturesFeatures
DescriptionDescriptionAccessoriesAccessories
ModelsModelsSuppliesSupplies


Product life cycle dates

Top rule

Type Model Announced Available Marketing Withdrawn Service Discontinued
4662-12G 2021-02-09 2021-02-19 - -
4662-24G 2021-02-09 2021-02-19 - -
4662-6H2 2021-02-09 2021-02-19 - -
4662-92G 2021-02-09 2021-02-19 - -
4662-UH6 2021-02-09 2021-02-19 - -


Back to topBack to top

Abstract

Top rule


Note: Not all of the following machine type models may be available in all countries on the date listed in the Product life cycle section. Check with your country representative for specific country availability dates.

FlashSystem 5200 systems are virtualized, NVMe-based, all-flash, software-defined storage solutions designed to unlock the power of your data by combining IBM Spectrum Virtualize, IBM FlashCore Modules, and storage-class memory

IBM FlashSystem 5200 NVMe control enclosures feature:

  • Two node canisters, each with an eight-core processor
  • 64 GB, 256 GB, and 512 GB cache options (32 GB, 128 GB, or 256 GB per canister)
  • 10 Gb iSCSI (copper) connectivity standard with optional 32/16 Gb FC, 12 Gb SAS, and 25/10 Gb iSCSI (optical) connectivity
  • 12 Gb SAS ports for expansion enclosure attachment
  • Twelve slots for 2.5-inch SFF NVMe drives

FlashSystem 5200 offers three 12 Gb SAS expansion enclosure models:

  • FlashSystem 5200 small form factor (SFF) Expansion Enclosure Model 24G supports up to twenty-four 2.5-inch SAS drives
  • FlashSystem 5200 large form factor (LFF) Expansion Enclosure Model 12G supports up to twelve 3.5-inch SAS drives
  • FlashSystem 5200 high-density (HD) Expansion Enclosure Model 92G supports up to ninety-two SAS drives in 3.5-inch carriers

Expansion enclosures can be intermixed within a FlashSystem 5200 system.

FlashSystem 5200 systems scale up to 748 drives with the attachment of FlashSystem 5200 expansion enclosures. FlashSystem 5200 systems can be clustered to help deliver greater performance, bandwidth, and scalability. A FlashSystem 5200 clustered system can contain up to four FlashSystem 5200 systems and up to 2,992 drives.

All FlashSystem 5200 functional capabilities are provided through IBM Spectrum Virtualize licensed machine code.

Model abstract 4662-6H2

The IBM 4662 FlashSystem 5200 NVMe Control Enclosure Model 6H2 features dual node canisters with an eight-core processor and up to 512 GB cache (system total) in a compact 1U, 19-inch rack mount enclosure. 10 Gb iSCSI connectivity is standard, with optional 32/16 Gb FC, 25/10 Gb iSCSI and 12 Gb SAS connectivity. It has twelve 2.5-inch NVMe drive slots and supports the attachment of up to twenty 2U expansion enclosures or up to eight 5U expansion enclosures. This delivers support for up to 748 drives. FlashSystem 5200 supports four-way system clustering including Hyperswap, data reduction pools with deduplication and compression, and encryption of data at rest.

Model abstract 4662-UH6

The IBM 4662 Model UH6 is the FlashSystem 5200 hardware component to be utilized in the Storage Utility Offering space. It is physically and functionally identical to the FlashSystem 5200 Model 6H2 with the exception of variable capacity billing. The variable capacity billing uses IBM Spectrum Control Storage Insights to monitor the system usage, allowing allocated storage usage above a base subscription rate to be billed per TB, per month. Allocated storage is identified as storage that is allocated to a specific host (and unusable to other hosts), whether data is written or not. For thin- provisioning, the data that is actually written is considered used. For thick provisioning, total allocated volume space is considered used.

Model abstract 4662-12G

The IBM 4662 FlashSystem 5200 LFF Expansion Enclosure Model 12G enables you to increase the capacity of your FlashSystem 5200 system. It features two expansion canisters and twelve 3.5-inch SAS drive slots in a compact 2U, 19-inch rack mount enclosure.

Model abstract 4662-24G

The IBM 4662 FlashSystem 5200 SFF Expansion Enclosure Model 24G enables you to increase the capacity of your FlashSystem 5200 system. It features two expansion canisters and twenty-four 2.5 inch SAS drive slots in a compact 2U, 19-inch rack mount enclosure.

Model abstract 4662-92G

The IBM 4662 FlashSystem 5200 HD Expansion Enclosure Model 92G enables you to increase the density and capacity of your FlashSystem 5200 system. It holds ninety-two 3.5 inch SAS drive slots in a 2U, 19-inch rack mount enclosure.



Back to topBack to top

Highlights

Top rule

IBM FlashSystem 5200 is a powerful, compact NVMe end-to-end platform delivering the full capabilities of IBM FlashCore Modules, storage-class memory, and IBM Spectrum Virtualize to the entry-level enterprise.



Back to topBack to top

Description

Top rule

FlashSystem 5200 offerings consist of a control enclosure and three expansion enclosure models:

  • FlashSystem 5200 control enclosure Model 6H2
    • Two node canisters, each with an eight-core processor
    • 64 GB, 256 GB, and 512 GB cache options (32 GB, 128 GB, or 256 GB per canister)
    • 10 Gb iSCSI (copper) connectivity standard with optional 32/16 Gb FC, 12 Gb SAS, and 25/10 Gb iSCSI (optical) connectivity
    • 12 Gb SAS ports for expansion enclosure attachment
    • Twelve slots for 2.5-inch SFF NVMe drives
    • 1U, 19-inch rack mount enclosure with 200 - 240 V AC power supplies
  • FlashSystem 5200 expansion enclosure models 12G and 24G
    • Two expansion canisters
    • 12 Gb SAS port for control enclosure and expansion enclosure attachment
    • Twelve slots for 3.5-inch LFF SAS drives (Model 12G) and twenty- four slots for 2.5-inch SFF SAS drives (Model 24G)
    • 2U, 19-inch rack mount enclosure with 100 - 240 V AC power supplies
  • FlashSystem 5200 expansion enclosure Model 92G
    • Two expansion canisters
    • 12 Gb SAS port for control enclosure and expansion enclosure attachment
    • Ninety-two slots for 3.5-inch LFF SAS drives
    • 5U, 19-inch rack mount enclosure with 180 - 264 V AC power supplies

All models are available with a one-year warranty and IBM Storage Proactive Care Base and Advanced options.

FC, SAS, and iSCSI connectivity with intermix flexibility

FlashSystem 5200 systems include four 10 Gb Ethernet ports standard for iSCSI connectivity and two 1 Gb Ethernet ports for service technician use. These models can be configured with up to four I/O adapter cards to provide up to eight 32 Gb ports, up to sixteen 16 Gb FC ports, or up to to eight 25/10 Gb Ethernet ports.

Storage-class memory

FlashSystem 5200 supports up to twelve storage-class memory NVMe drives. These small capacity, ultra-low latency drives can be used in conjunction with EasyTier to further improve the overall performance of your NVMe workloads, or as a stand-alone flash storage tier with even higher performance.

The following NVMe storage-class memory drives are supported in FlashSystem 5200 control enclosures:

  • 375 GB NVMe storage-class memory drive
  • 750 GB NVMe storage-class memory drive
  • 800 GB NVMe storage-class memory drive
  • 1.6 TB NVMe storage-class memory drive

IBM FlashCore Modules and industry-standard NVMe drive options

FlashSystem 5200 is designed to support FlashCore Modules, industry-standard flash drives, and an intermix of both.

FlashCore Modules integrate IBM MicroLatency technology, advanced flash management, and reliability into a 2.5-inch SFF NVMe with built- in performance-neutral hardware compression and encryption.

For improved flexibility, FlashSystem 5200 systems also support a variety of industry-standard, self-encrypting NVMe flash drives. Deployments requiring higher flexibility, scalability, density, and cost benefits of hard disk drives can take advantage of FlashSystem 5200 expansion enclosures.

The following NVMe FlashCore Modules are supported in FlashSystem 5200 control enclosures:

  • 4.8 TB NVMe FlashCore Module
  • 9.6 TB NVMe FlashCore Module
  • 19.2 TB NVMe FlashCore Module
  • 38.4 TB NVMe FlashCore Module

The following NVMe industry-standard drives are supported in FlashSystem 5200 control enclosures:

  • 800 GB 3DWPD NVMe flash drive
  • 1.92 TB NVMe flash drive
  • 3.84 TB NVMe flash drive
  • 7.68 TB NVMe flash drive
  • 15.36 TB NVMe flash drive

All drives are dual-port and hot-swappable. Drives can be intermixed in the control enclosure as long as configuration rules are followed. Expansion enclosures can be intermixed behind the control enclosure

Drive options and intermix flexibility meet a complete range of needs

FlashSystem 5200 is designed to support a complete range of data storage requirements, from highly utilized applications to high- capacity, low usage applications with hybrid or all-flash solutions.

The following 3.5-inch LFF drives are supported:

  • High-performance, enterprise-class disk drives: 900 GB, 1.2 TB, 1.8 TB, and 2.4 TB 10,000 rpm(1)
  • High-capacity, archival-class nearline disk drives: 4 TB, 6 TB, 8 TB, 10 TB, 12 TB, 14 TB, 16 TB, and 18 TB 7,200 rpm

(1)These are 2.5-inch drives packaged in a 3.5-inch carrier.

The following 2.5-inch SFF drives are supported:

  • Flash drives: 800 GB, 1.92 TB, 3.84 TB, 7.68 TB, 15.36 TB, and 30.72 TB
  • High-performance, enterprise-class disk drives: 900 GB, 1.2 TB, 1.8 TB, and 2.4 TB 10,000 rpm
  • High-capacity, archival-class nearline disk drives: 2 TB 7,200 rpm

All drives are dual-port and hot-swappable. Drives of the same form factor can be intermixed within an enclosure, and LFF and SFF expansion enclosures can be intermixed behind either a LFF or SFF control enclosure.

Scalable configurations respond to growing capacity needs

FlashSystem 5200 systems scale to 748 drives per system with the attachment of eight FlashSystem 5200 high-density LFF expansion enclosures. FlashSystem 5200 systems can be clustered to help deliver even greater performance, bandwidth, and storage capacity. With four- way system clustering, the maximum size of a FlashSystem 5200 system increases to 2,992 drives.

Further scalability can be achieved with virtualization of external storage. When FlashSystem 5200 virtualizes an external storage system, capacity in the external system inherits the functional richness and ease of use of FlashSystem 5200.

Designed for high availability

FlashSystem 5200 is designed to offer high system and data availability with the following features:

  • HyperSwap for high availability with dual-site, active-active access to a volume
  • Dual-active, intelligent node canisters with mirrored cache
  • Dual-port drives with automatic drive failure detection
  • Distributed RAID levels 1, 5, and 6
  • Redundant hardware, including power supplies and fans
  • Hot-swappable and client replaceable components
  • Automated path failover support for the data path between the server and the drives

Rich set of functional capabilities standard with every system

As a member of the FlashSystem family, FlashSystem 5200 leverages IBM Spectrum Virtualize functions and management tools. The following functions are included with FlashSystem 5200 models:

  • Distributed RAID 1, 5, and 6 provides the flexibility to choose the level of data protection required.
  • Virtualization of internal storage enables rapid, flexible provisioning and simple configuration changes.
  • Thin provisioning optimizes efficiency by allocating disk storage space in a flexible manner among multiple users, based on the minimum space required by each user at any given time. With thin provisioning, applications consume only the space they are actually using, not the total space that has been allocated to them.
  • Data reduction pools increase existing infrastructure capacity utilization by leveraging the following efficiency functions:
    • Automatically deallocate and reclaim capacity of thin-provisioned volumes containing deleted data and, for the first time, enable this reclaimed capacity to be reused by other volumes.
    • Block deduplication for increased efficiency of storage usage by utilizing pointers in duplicate blocks rather than keeping multiple copies.
    • Compression that improves efficiency by storing more active primary data in the same physical disk space.
  • Dynamic migration delivers efficiency and business value through a nondisruptive migration function.
  • FlashCopy enables creation of copies of data for backup, parallel processing, testing, and development, and allows the copies to be available almost immediately. FlashSystem 5200 supports up to 8,192 FlashCopy targets per system.
  • Graphical user interface delivers intuitive data management designed with point-and-click system management capabilities.

Encryption for enhanced data security

FlashSystem 5200 supports encryption for data at rest. Encryption is performed by the control enclosure for data stored within the entire system, the FlashSystem 5200 control enclosure, and all attached FlashSystem 5200 expansion enclosures.

Encryption is enabled on FlashSystem 5200 through the acquisition of the Encryption Enablement feature. This feature enables encryption on the entire system.

The Encryption USB Flash Drives (four pack) feature or IBM Security Key Manager (SKLM) are required for encryption keys management.

IBM Storage Insights

Available at no charge, cloud-based IBM Storage Insights provides a single dashboard that gives you a clear view of all your IBM block storage. You'll be able to make better decisions by seeing trends in performance and capacity. Storage health information enables you to focus on areas needing attention and when IBM support is needed, Storage Insights simplifies uploading logs, speeds resolution with online configuration data, and provides an overview of open tickets all in one place. Storage Insights Pro is a subscription service that provides longer historical views of data, more reporting and optimization options, and supports IBM file and block storage together with EMC VNX and VMAX.

There is no ordering required. For registration and installation information, see the IBM Storage Insights Enrollment website.

IBM Power Private Cloud Rack Solution

IBM FlashSystem 5200 is an integral part of the IBM Power Private Cloud Rack Solution, providing an easy-to-order, prepackaged solution of RedHat software, IBM Power servers, IBM FlashSystem 5200, IBM SAN switches, and IBM rack. It comes preconfigured and ready to go with all you need to quickly inject modernization into your existing applications.

Accessibility by people with disabilities

Accessibility Compliance Reports (previously known as a VPAT) containing details on accessibility compliance to standards, including the Worldwide Consortium Web Content Accessibility Guidelines, European Standard EN 301 349, and US Section 508, can be found on the IBM Accessibility Conformance Report Request website.



Back to topBack to top

Models

Top rule

Model summary matrix

Model Description Memory Capacity (raw) Drive technology Drive protocol
6H2 IBM FlashSystem 5200 NVMe Control Enclosure 64 GB - 512 GB 460.8 TB FCM / SSD / SCM NVMe
UH6 IBM FlashSystem 5200 Utility NVMe Control Enclosure 64 GB - 512 GB 460.8 TB FCM / SSD / SCM NVMe
12G IBM FlashSystem 5200 N/A 216 TB HDD SAS
24G IBM FlashSystem 5200 N/A 737.2 TB SSD / HDD SAS
24G IBM FlashSystem 5200 N/A 2826.2 TB SSD / HDD SAS

Customer setup (CSU)

Yes.

Devices supported

None.

Model conversions

Not available.



Back to topBack to top

Technical description

Top rule

Physical specifications Physical specifications Hardware requirements Hardware requirements
Operating environment Operating environment Software requirements Software requirements
Limitations Limitations


Physical specifications

Control enclosure

  • Height: 4.3 cm (1.7 in.)
  • Width: 44.6 cm (17.5 in.) (19 in. rack standard)
  • Depth: 77.0 cm (30.3 in.)
  • Approximate weight:
    • Empty: 15.9kg (35.0 lb)
    • Fully configured: 19.5kg (43.0 lb)

2U expansion enclosures

  • Height: 8.7 cm (3.4 in)
  • Width: 48.3 cm (19.0 in)
  • Depth: 55.6 cm (21.9 in)
  • Aproximate weight:
    • LFF expansion enclosure:
      • Empty: 16.4 kg (36.1 lb)
      • Fully configured: 26.7 kg (58.7 lb)
    • SFF expansion enclosure:
      • Empty: 16.7 kg (36.7 lb)
      • Fully configured: 25.0 kg (55.0 lb)

5U expansion enclosure

  • Height: 220 mm (8.66 in.)
  • Width: 438 mm (17.24 in.)
  • Depth: 1013 mm (39.88 in.)
  • Approximate weight:
    • Empty: 42.5 kg (93.7 lb)
    • Fully configured with flash drives: 78.6 kg (173.3 lb)
    • Fully configured with 10k rpm HDDs: 86 kg (189.6 lb)
    • Fully configured with 7.2k rpm HDDs: 138.6 kg (305.6 lb)

To assure installability and serviceability in non-IBM industry- standard racks, review the installation planning information for any product-specific installation requirements.

Operating environment

Air temperature

  • Control enclosure: Operating: 10°C - 35°C (50°F - 95°F) up to 950 m (3,117 ft) above sea level. Above 950 m, de- rate maximum air temperature 1 degree per 175 m.
  • 2U expansion enclosures: 10°C - 35°C (41°F - 104°F) up to 950 m (3,117 ft) above sea level. Above 950 m, de- rate maximum air temperature 1 degree per 175 m.
  • HD expansion enclosure: 5°C - 35°C (41°F - 95°F) up to 950 m (3,117 ft) above sea level. Above 950 m, de-rate maximum air temperature 1 degree per 175 m.
  • Nonoperating: 1°C - 60°C (33.8°F - 140°F)

Relative humidity

  • Operating: 8% - 85%
  • Nonoperating: 8% - 85%

Electrical power

Power consumption will vary with configuration. The product documentation in IBM Knowledge Center contains further examples of measured power consumption.

Control enclosure

  • Voltage range: 200 - 240 V AC
  • Frequency: 50 - 60 Hz
  • Power supply unit (platinum): 1500 watts
  • Maximum power rating: 900 watts
  • Heat dissipation: 3,071 BTU per hour

2U expansion enclosures

  • Voltage range: 100 - 240 V AC
  • Frequency: 50 - 60 Hz
  • Power rating (platinum): 800 watts
  • Heat dissipation: 2,730 BTU per hour

5U expansion enclosure

  • Voltage range: 200 - 240 V AC
  • Frequency: 50 - 60 Hz
  • Power rating (platinum): 2400 watts
  • Heat dissipation: 8,189 BTU per hour

Acoustical noise emission

  • Control enclosure:
    • 6.7 bels (idling)
    • 6.7 bels (operating)
  • LFF expansion enclosure:
    • 6.1 bels (idling)
    • 6.1 bels (operating)
  • SFF expansion enclosure:
    • 6.2 bels (idling)
    • 6.2 bels (operating)
  • HD expansion enclosure:
    • 7.8 bels (idling)
    • 7.8 bels (operating)

Limitations

Data Reduction Pool deduplication

Deduplication in Data Reduction Pools requires at least 256 GB of cache for operation.

Drive considerations

Distributed RAID 1, 5, and 6 configurations are supported.

Configuration limitations and restrictions

For FlashSystem 5200 configuration limitations and restrictions, go to the IBM Support Portal and enter "FlashSystem 5200 configuration limitations and restrictions" in the Search support box.

Consider the following rules when planning for the maximum configuration in terms of drive slots and expansion enclosures that a specific system can be configured with.

Expansion enclosure attachment rules:

Product     Machine Model SAS     Max.      Max. qty  Max. qty  Max. qty
            type          chains  expansion of drives of drives of drives
                          per     enclosure per SAS   per       per
                          control per SAS   expansion control   clus-
                          enclo-  chain     chain     enclosure tered
                          sure    (2U- /              or node   system
                          or node 5U-92G)             pair
                          pair
----------- ------- ----- ------- --------- --------- --------- ---------
FlashSystem 4662    6H2   2       10/4      368       736       2,992
5200

2U expansion enclosures and 5U expansion enclosure mix rules:

   Maximum #
   of Drive
   Slots per
   SAS
   expansion
   string
   5U
-- --------- --- --- --- --- --- --- --- --- --- --- ---
2U           0   1   2   3   4   5   6   7   8   9   10
   0         0   24  48  72  96  120 144 168 192 216 240
   1         92  116 140 164 188 212 236 260 -   -   -
   2         184 208 232 256 280 304 -   -   -   -   -
   3         276 300 324 -   -   -   -   -   -   -   -
   4         368 -   -   -   -   -   -   -   -   -   -

Encryption

The Encryption Enablement feature (number ALE0) and the Encryption USB Drive Pack feature (feature number ALEC) are not available in the following countries:

  • Belarus
  • Kazakhstan
  • People's Republic of China
  • Russia

Shipments to Australia, India, Korea, New Zealand, Russia, and Taiwan

FlashSystem 5200 machines shipped prior to the published planned availability date for these countries are not compliant with associated country certifications and product labeling requirements. If you did not acquire your machine from IBM as a direct shipment to these countries, you are responsible for validating the machine has the appropriate certifications and product labels.

Contact your IBM sales representative or IBM Business Partner for assistance with this validation.

Certifications and product labels

Machines directly shipped from IBM are compliant with certification and product labeling requirements for the country into which the machine is shipped. You are responsible for validating that the machine has the appropriate certifications and product labels if the machine is relocated to another country.

Contact your IBM sales representative or IBM Business Partner for assistance with this validation.

Hardware requirements

Not applicable.

Software requirements

FlashSystem 5200 requires IBM Spectrum Virtualize licensed machine code level 8.4.0.1, or later.

Feature codes AGSA, AGSB, AGSC and AGSD require IBM Spectrum Virtualize licensed machine code level 8.5.0.0, or later."

IBM FlashSystem 5200 models 6H2 and UH6 support external virtualization. Use of the external virtualization capability is entitled through the acquisition of IBM Spectrum Virtualize software for SAN Volume Controller (SW PID 5641-VC8 in AAS and SW PID 5725-M19 in Passport Advantage).

See the FlashSystem 5200 product documentation and the IBM Support site for additional information on licensed machine code levels and other requirements.

For a comprehensive list of supported environments, devices, and configurations, go to the IBM SSIC website.



Back to topBack to top

Publications

Top rule

To order additional hardcopy publications for a fee or download free PDF format publications, go to the IBM Publications Center website.

IBM Knowledge Center provides you with a single point of reference where you can access product documentation for IBM systems hardware, operating systems, and server software. Through a consistent framework, you can efficiently find information and personalize your access by going to IBM Knowledge Center for all your product information needs.

To access the IBM Publications Center Portal, go to the IBM Publications Center website.

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. A large number of publications are available online in various file formats, which can currently be downloaded.

National language support

When available, translated product documentation can be found in the IBM Support Portal.



Back to topBack to top

Features

Top rule

Features - No charge Features - No charge Feature descriptions Feature descriptions
Features - Chargeable Features - Chargeable


Features - No charge

  • Administrative
    • (#0021) - JEMT Indicator
    • (#4650) - Rack Indicator None
    • (#4651) - Rack Indicator Rack 1
    • (#4652) - Rack Indicator Rack 2
    • (#4653) - Rack Indicator Rack 3
    • (#4654) - Rack Indicator Rack 4
    • (#4655) - Rack Indicator Rack 5
    • (#4656) - Rack Indicator Rack 6
    • (#4657) - Rack Indicator Rack 7
    • (#4658) - Rack Indicator Rack 8
    • (#4659) - Rack Indicator Rack 9
    • (#4660) - Rack Indicator Rack 10
    • (#4661) - Rack Indicator Rack 11
    • (#4662) - Rack Indicator Rack 12
    • (#4663) - Rack Indicator Rack 13
    • (#4664) - Rack Indicator Rack 14
    • (#4665) - Rack Indicator Rack 15
    • (#4666) - Rack Indicator Rack 16
    • (#ADN1) - Order Type 1 Indicator - CTO
    • (#ADN2) - Order Type 2 Indicator - MTM Only
    • (#AHZC) - VersaStack Solution Indicator
    • (#AHZD) - All Flash Solution Indicator
    • (#AHZE) - Hybrid Flash Indicator
    • (#AJGH) - Red Hat OpenShift Indicator
    • (#ALH0) - IBM Storage Expert Care Indicator
    • (#ALJ1) - IBM Storage Expert Care Basic 1 Year
    • (#ALJ2) - IBM Storage Expert Care Basic 2 Year
    • (#ALJ3) - IBM Storage Expert Care Basic 3 Year
    • (#ALJ4) - IBM Storage Expert Care Basic 4 Year
    • (#ALJ5) - IBM Storage Expert Care Basic 5 Year
    • (#ALK1) - IBM Storage Expert Care Advanced 1 Year
    • (#ALK2) - IBM Storage Expert Care Advanced 2 Year
    • (#ALK3) - IBM Storage Expert Care Advanced 3 Year
    • (#ALK4) - IBM Storage Expert Care Advanced 4 Year
    • (#ALK5) - IBM Storage Expert Care Advanced 5 Year
    • (#ALK7) - Expert Care Advanced 1 hour Committed Contact 1 Year
    • (#ALK8) - Expert Care Advanced 4 hour Committed On-Site 1 Year
    • (#ALK9) - Expert Care Advanced 4 hour Committed Fix 1 Year
    • (#ALKA) - Expert Care Advanced 6 hour Committed Fix 1 Year
    • (#ALKB) - Expert Care Advanced 8 hour Committed Fix 1 Year
    • (#ALKC) - Expert Care Advanced 12 hour Committed Fix 1 Year
    • (#ALKD) - Expert Care Advanced 24 hour Committed Fix 1 Year
    • (#ALKE) - Expert Care Advanced 48 hour Committed Fix 1 Year
    • (#ALKF) - Expert Care Advanced 72 hour Committed Fix 1 Year
    • (#ALKG) - Expert Care Advanced 1 hour Committed Contact 2 Year
    • (#ALKH) - Expert Care Advanced 4 hour Committed On-Site 2 Year
    • (#ALKJ) - Expert Care Advanced 4 hour Committed Fix 2 Year
    • (#ALKK) - Expert Care Advanced 6 hour Committed Fix 2 Year
    • (#ALKL) - Expert Care Advanced 8 hour Committed Fix 2 Year
    • (#ALKM) - Expert Care Advanced 12 hour Committed Fix 2 Year
    • (#ALKN) - Expert Care Advanced 24 hour Committed Fix 2 Year
    • (#ALKP) - Expert Care Advanced 48 hour Committed Fix 2 Year
    • (#ALKQ) - Expert Care Advanced 72 hour Committed Fix 2 Year
    • (#ALKR) - Expert Care Advanced 1 hour Committed Contact 3 Year
    • (#ALKS) - Expert Care Advanced 4 hour Committed On-Site 3 Year
    • (#ALKT) - Expert Care Advanced 4 hour Committed Fix 3 Year
    • (#ALKU) - Expert Care Advanced 6 hour Committed Fix 3 Year
    • (#ALKV) - Expert Care Advanced 8 hour Committed Fix 3 Year
    • (#ALKW) - Expert Care Advanced 12 hour Committed Fix 3 Year
    • (#ALKX) - Expert Care Advanced 24 hour Committed Fix 3 Year
    • (#ALKY) - Expert Care Advanced 48 hour Committed Fix 3 Year
    • (#ALKZ) - Expert Care Advanced 72 hour Committed Fix 3 Year
    • (#ALC7) - Expert Care Advanced 1 hour Committed Contact 4 Year
    • (#ALC8) - Expert Care Advanced 4 hour Committed On-Site 4 Year
    • (#ALC9) - Expert Care Advanced 4 hour Committed Fix 4 Year
    • (#ALCA) - Expert Care Advanced 6 hour Committed Fix 4 Year
    • (#ALCB) - Expert Care Advanced 8 hour Committed Fix 4 Year
    • (#ALCC) - Expert Care Advanced 12 hour Committed Fix 4 Year
    • (#ALCD) - Expert Care Advanced 24 hour Committed Fix 4 Year
    • (#ALCE) - Expert Care Advanced 48 hour Committed Fix 4 Year
    • (#ALCF) - Expert Care Advanced 72 hour Committed Fix 4 Year
    • (#ALCG) - Expert Care Advanced 1 hour Committed Contact 5 Year
    • (#ALCH) - Expert Care Advanced 4 hour Committed On-Site 5 Year
    • (#ALCJ) - Expert Care Advanced 4 hour Committed Fix 5 Year
    • (#ALCK) - Expert Care Advanced 6 hour Committed Fix 5 Year
    • (#ALCL) - Expert Care Advanced 8 hour Committed Fix 5 Year
    • (#ALCM) - Expert Care Advanced 12 hour Committed Fix 5 Year
    • (#ALCN) - Expert Care Advanced 24 hour Committed Fix 5 Year
    • (#ALCP) - Expert Care Advanced 48 hour Committed Fix 5 Year
    • (#ALCQ) - Expert Care Advanced 72 hour Committed Fix 5 Year
    • (#B0NQ) - SP Hard Drive/Media Retention - Storage 3 years
    • (#B0PF) - SP Hard Drive/Media Retention - Storage 5 years
    • (#B0SK) - SP Machine Setup Support for Storage
    • (#EOF0) - Route to Power Manufacturing Indicator
    • (#ELG2) - IBM Power Private Cloud Rack Solution Indicator
    • (#ELG4) - IBM Power Private Cloud Rack for OracleDB Solution Indicator
  • Miscellaneous
    • (#A2EV) - RFID AG/AP: 902-928 Mhz
    • (#A2EW) - RFID EMEA: 865.6-867.8 Mhz
    • (#AG00) - Shipping and Handling - No Charge

Features - Chargeable

Special Features - Initial Orders
  • Administrative
    • (#AHY1) - Future use - reserved 1
    • (#AHY2) - Future use - reserved 2
    • (#AHY3) - Future use - reserved 3
    • (#AHY4) - Future use - reserved 4
    • (#AHY5) - Future use - reserved 5
    • (#AHY6) - Future use - reserved 6
    • (#AHY7) - Future use - reserved 7
    • (#AHY8) - Future use - reserved 8
    • (#AHY9) - Future use - reserved 9
  • Miscellaneous
    • (#ACZA) - Generic Bezel
    • (#ACZF) - Generic Packaging
    • (#ADZ1) - Non-China origin
    • (#AGJW) - Shipping and Handling
  • Memory
    • (#ALG0) - 64 GB Base Cache
    • (#ALG1) - 512 GB Base Cache
  • Power supply
    • (#AHPE) - AC Power Supply (Pair)
  • Power
    • (#AHPA) - AC Power Supply High Efficiency (Pair)
Special Features - Plant and/or Field Installable
  • Cable
    • (#ACSQ) - 1m OM3 Fiber Cable (LC)
    • (#ACSR) - 5m OM3 Fiber Cable (LC)
    • (#ACSS) - 10m OM3 Fiber Cable (LC)
    • (#ACST) - 25m OM3 Fiber Cable (LC)
    • (#ACUA) - 0.6m 12 Gb SAS Cable (mSAS HD to mSAS HD)
    • (#ACUB) - 1.5m 12 Gb SAS Cable (mSAS HD to mSAS HD)
    • (#ACUC) - 3m 12 Gb SAS Cable (mSAS HD to mSAS HD)
    • (#ACUE) - 6m 12 Gb SAS Cable (mSAS HD to mSAS HD)
  • Administrative
    • (#5555) - Bulk Order Indicator
    • (#ADN3) - Order Type 3 Indicator - FC Only
    • (#ADNR) - No Rules Order Indicator
    • (#AQQQ) - No Ship MES
    • (#ECSM) - CSC ORDER ROUTING INDICATOR - GUADALAJARA
    • (#SVBP) - BP Post-Sale Services
    • (#SVCS) - IBM Systems Lab Services Post-Sale Services
    • (#SVNN) - Other IBM Post-Sale Services
  • Miscellaneous
    • (#ACHP) - 25 GbE Shortwave SFP28 Transceivers (Four)
    • (#ACHQ) - 10 GbE Shortwave SFP+ Transceivers (Four)
    • (#ACHU) - 16 Gb FC Longwave SFP Transceivers(Pair)
    • (#ACJ2) - 10GbE SFP+ RJ45 Transceivers (Four)
    • (#AE00) - Variable Usage 1TB/month
    • (#AE01) - Variable Usage 10TB/month
    • (#AE02) - Variable Usage 100TB/month
    • (#ALE0) - Encryption Enablement
    • (#ALEC) - Encryption USB Flash Drives (Four Pack)
  • Adapters
    • (#ALB3) - 16 Gb FC 4 Port Adapter Cards (Pair)
    • (#ALB5) - 32 Gb FC 2 Port Adapter Cards (Pair)
    • (#ALBJ) - 16 Gb FC 4 Port Adapter Cards (Pair)
    • (#ALBK) - 32 Gb FC 2 Port Adapter Cards (Pair)
    • (#ALBL) - 10 Gb Ethernet 4 Port Adapter Cards (Pair)
    • (#ALBM) - 25/10 GbE (RoCE) 2 Port Adapter Cards (Pair)
    • (#ALBN) - 25/10 GbE (iWARP) 2 Port Adapter Cards (Pair)
    • (#ALBP) - 12 Gb SAS 4 Port Adapter Cards (Pair)
    • (#ALBQ) - SAS Expansion Enclosure Attach Card (Pair)
  • Memory
    • (#ALGC) - 192 GB Cache Upgrade
    • (#ALGD) - 512 GB Cache Upgrade
  • Drive
    • (#AL27) - 900 GB 10,000 rpm 12 Gb SAS 3.5 Inch HDD
    • (#AL28) - 1.2 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD
    • (#AL29) - 1.8 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD
    • (#AL2A) - 2.4 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD
    • (#AL39) - 4 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL3A) - 6 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL3B) - 8 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL3C) - 10 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL3D) - 12 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL3E) - 14 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL3F) - 16 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL3G) - 18 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL43) - 1.2 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD
    • (#AL44) - 1.8 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD
    • (#AL45) - 2.4 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD
    • (#AL47) - 6 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL48) - 8 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL49) - 10 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL4A) - 12 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL4B) - 14 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL4C) - 16 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL4D) - 18 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD
    • (#AL68) - 900 GB 10,000 rpm 12 Gb SAS 2.5 Inch HDD
    • (#AL69) - 1.2 TB 10,000 rpm 12 Gb SAS 2.5 Inch HDD
    • (#AL6A) - 1.8 TB 10,000 rpm 12 Gb SAS 2.5 Inch HDD
    • (#AL6B) - 2.4 TB 10,000 rpm 12 Gb SAS 2.5 Inch HDD
    • (#AL76) - 2 TB 7,200 rpm 12 Gb SAS NL 2.5 Inch HDD
  • SAS flash drives
    • (#AL4J) - 1.92TB 12 Gb SAS 3.5 Inch Flash Drive
    • (#AL4K) - 3.84TB 12 Gb SAS 3.5 Inch Flash Drive
    • (#AL4L) - 7.68TB 12 Gb SAS 3.5 Inch Flash Drive
    • (#AL4M) - 15.36TB 12 Gb SAS 3.5 Inch Flash Drive
    • (#AL4N) - 30.72TB 12 Gb SAS 3.5 Inch Flash Drive
    • (#AL80) - 1.92TB 12 Gb SAS 2.5 Inch Flash Drive
    • (#AL81) - 3.84TB 12 Gb SAS 2.5 Inch Flash Drive
    • (#AL82) - 7.68TB 12 Gb SAS 2.5 Inch Flash Drive
    • (#AL83) - 15.36TB 12 Gb SAS 2.5 Inch Flash Drive
    • (#AL84) - 30.72TB 12 Gb SAS 2.5 Inch Flash Drive
    • (#AL8A) - 800 GB 3DWPD 12 Gb SAS 2.5 Inch Flash Drive
  • Linecords
    • (#9716) - Power Cord - EMEA
    • (#9717) - Power Cord - Australia / New Zealand
    • (#9718) - Power Cord - Europe / Africa
    • (#9719) - Power Cord - Denmark
    • (#9720) - Power Cord - South Africa
    • (#9721) - Power Cord - Switzerland
    • (#9722) - Power Cord - Chile / Italy
    • (#9723) - Power Cord - Israel
    • (#9725) - Power Cord - Argentina
    • (#9726) - Power Cord - China
    • (#9730) - Power Cord - PDU Connection
    • (#9731) - Power Cord - US/Group 1
    • (#9732) - Power Cord - Taiwan
    • (#9733) - Power Cord - Brazil
    • (#9734) - Power Cord - India
    • (#9735) - Power Cord - Japan
    • (#9736) - Power Cord - Korea
    • (#9737) - Power Cord - Chicago
    • (#AHP5) - Power Cord - PDU High Density Expansion
    • (#AHP6) - Power Cord - PDU Connection (C20)
  • NVMe flash drives
    • (#AGS5) - 4.8 TB NVMe Flash Core Module
    • (#AGS6) - 9.6 TB NVMe Flash Core Module
    • (#AGS7) - 19.2 TB NVMe Flash Core Module
    • (#AGS8) - 38.4 TB NVMe Flash Core Module
    • (#AGSA) - 4.8TB FlashCore Module 3
    • (#AGSB) - 9.6TB FlashCore Module 3
    • (#AGSC) - 19.2TB FlashCore Module 3
    • (#AGSD) - 38.4TB FlashCore Module 3
    • (#AGT1) - 800 GB NVMe Flash Drive
    • (#AGT2) - 1.92 TB NVMe Flash Drive
    • (#AGT3) - 3.84 TB NVMe Flash Drive
    • (#AGT4) - 7.68 TB NVMe Flash Drive
    • (#AGT5) - 15.36 TB NVMe Flash Drive
    • (#AGT6) - 30.72TB NVMe Flash Drive
    • (#AGTA) - 375 GB NVMe Storage Class Memory Drive
    • (#AGTB) - 750 GB NVMe Storage Class Memory Drive
    • (#AGTE) - 800 GB NVMe Storage Class Memory Drive
    • (#AGTF) - 1.6 TB NVMe Storage Class Memory Drive

Feature descriptions


Note: Not all of the following features are available in all countries. Check with your country representative for specific feature availability.

The following is a list of all feature codes in numeric order for the IBM System Storage 4662 machine type.

(#0021) JEMT Indicator

This feature indicates an IBM internal order for a machine under the Joint Engineering Manufacturing Test (JEMT) program. It is for administrative purposes only.

  • For 4662-12G: (#0021)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-24G: (#0021)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-6H2: (#0021)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-92G: (#0021)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-UH6: (#0021)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
(#4650) Rack Indicator None

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4650)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4651) Rack Indicator Rack 1

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4651)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4652) Rack Indicator Rack 2

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4652)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4653) Rack Indicator Rack 3

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4653)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4654) Rack Indicator Rack 4

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4654)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4655) Rack Indicator Rack 5

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4655)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4656) Rack Indicator Rack 6

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4656)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4657) Rack Indicator Rack 7

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4657)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4658) Rack Indicator Rack 8

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4658)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4659) Rack Indicator Rack 9

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4659)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4660) Rack Indicator Rack 10

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4660)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4661) Rack Indicator Rack 11

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4661)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4662) Rack Indicator Rack 12

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4662)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4663) Rack Indicator Rack 13

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4663)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4664) Rack Indicator Rack 14

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4664)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4665) Rack Indicator Rack 15

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4665)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#4666) Rack Indicator Rack 16

This feature is used for administrative purposes only.

  • For 4662-6H2: (#4666)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#5555) Bulk Order Indicator

This feature designates a bulk MES order for inventory stocking purposes. When this feature is specified on an order or present on the machine inventory record, select features can be ordered at a maximum quantity of 255.

  • For 4662-12G: (#5555)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Not compatible with feature ADNR.
  • For 4662-24G: (#5555)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Not compatible with feature ADNR.
  • For 4662-6H2: (#5555)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Not compatible with feature ADNR.
  • For 4662-92G: (#5555)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Not compatible with feature ADNR.
  • For 4662-UH6: (#5555)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Not compatible with feature ADNR.
(#9716) Power Cord - EMEA

This feature provides two 2.8 meter 10A/250V, C13 to BS 1363 power cords for use in the following countries: Abu Dhabi, Bahrain, Botswana, Brunei Darussalam, Channel Islands, Cyprus, Dominica, Gambia, Ghana, Grenada, Guyana, Hong Kong, Iraq, Ireland, Jordan, Kenya, Kuwait, Liberia, Malawi, Malaysia, Malta, Myanmar (Burma), Nigeria, Oman, Qatar, Saint Kitts 1 Nevis, Saint Lucia, Saint Vincent and the Grenadines, Seychelles, Sierra Leone, Singapore, Sudan, Tanzania (United Republic of), Trinidad and Tobago, United Arab Emirates (Dubai), United Kingdom, Yemen, Zambia, Zimbabwe, and Uganda.

  • For 4662-12G: (#9716)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9716)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9716)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9716)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9717) Power Cord - Australia / New Zealand

This feature provides two 2.8 meter 10A/250V, C13 to SAA-AS C112 power cords for use in the following countries: Australia, Fiji, Kiribati, Nauru, New Zealand, and Papua New Guinea.

  • For 4662-12G: (#9717)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9717)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9717)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9717)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9718) Power Cord - Europe / Africa

This feature provides two 2.8 meter 10A/250V, C13 to CEE7-VII power cords for use in the following countries: Afghanistan, Albania, Algeria, Andorra, Angola, Armenia, Austria, Azerbaijan, Belarus, Belgium, Benin, Bosnia and Herzegovina, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo (Democratic Republic of), Congo (Republic of), Cote D'Ivoire (Ivory Coast), Croatia (Republic of), Czech Rep, Dahomey, Djibouti, Egypt, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Finland, France, French Guyana, French Polynesia, Gabon, Georgia, Germany, Greece, Guadeloupe, Guinea, Guinea Bissau, Hungary, Iceland, Indonesia, Iran, Kazakhstan, Kyrgyzstan, Laos (Peoples Democratic Republic of), Latvia, Lebanon, Lithuania, Luxembourg, Macedonia (former Yugoslav Republic of), Madagascar, Mali, Martinique, Mauritania, Mauritius, Mayotte, Moldova (Republic of), Monaco, Mongolia, Morocco, Mozambique, Netherlands, New Caledonia, Niger, Norway, Poland, Portugal, Reunion, Romania, Russian Federation Rwanda, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Slovakia, Slovenia (Republic of), Somalia, Spain, Suriname, Sweden, Syrian Arab Republic, Tajikistan, Tahiti, Togo, Tunisia, Turkey, Turkmenistan, Ukraine, Upper Volta, Uzbekistan, Vanuatu, Vietnam, Wallis and Futuna, Yugoslavia (Federal Republic of), and Zaire.

  • For 4662-12G: (#9718)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9718)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9718)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9718)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9719) Power Cord - Denmark

This feature provides two 2.8 meter 10A/250V, C13 to DK2-5a power cords.

  • For 4662-12G: (#9719)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9719)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9719)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9719)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9720) Power Cord - South Africa

This feature provides two 2.8 meter 10A/250V, C13 to SABS 164/1 power cords for use in the following countries: Bangladesh, Lesotho, Maceo, Maldives, Namibia, Nepal, Pakistan, Samoa, South Africa, Sri Lanka, Swaziland, and Uganda.

  • For 4662-12G: (#9720)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9720)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9720)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9720)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9721) Power Cord - Switzerland

This feature provides two 2.8 meter 10A/250V, C13 to IEC 60884 Standard Sheet 416534-2 (CH Type 12) power cords for use in the following countries: Liechtenstein and Switzerland.

  • For 4662-12G: (#9721)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9721)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9721)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9721)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9722) Power Cord - Chile / Italy

This feature provides two 2.8 meter 10A/250V, C13 to CEI 23-16 power cords for use in the following countries: Chile, Italy, and Libyan Arab Jamahiriya.

  • For 4662-12G: (#9722)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9722)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9722)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9722)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9723) Power Cord - Israel

This feature provides two 2.8 meter 10A/250V, C13 to SI 32 power cords.

  • For 4662-12G: (#9723)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9723)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9723)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9723)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9725) Power Cord - Argentina

This feature provides two 2.8 meter 10A/250V, C13 to IRAM 2073 power cords for use in the following countries: Argentina, Paraguay, and Uruguay.

  • For 4662-12G: (#9725)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9725)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9725)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9725)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9726) Power Cord - China

This feature provides two 2.8 meter 10A/250V, C13 to GB 2099.1 power cords.

  • For 4662-12G: (#9726)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9726)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9726)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9726)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9730) Power Cord - PDU Connection

This feature provides two 2.0 meter rack power distribution unit (PDU) C13 to C14 power cords.

  • For 4662-12G: (#9730)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9730)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9730)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9730)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9731) Power Cord - US/Group 1

This feature provides two 2.8 meter 10A/125V, C13 to NEMA 5-15P power cords for use in the following countries: Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Canada, Cayman Islands, Costa Rica, Columbia, Cuba, Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Jamaica, Mexico, Micronesia (Federal States of), Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, Saudi Arabia, Thailand, Turks and Caicos Islands, United States, and Venezuela

  • For 4662-12G: (#9731)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9731)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9732) Power Cord - Taiwan

This feature provides two 2.8 meter 10A/125V, C13 to CNS 10917-3 power cords.

  • For 4662-12G: (#9732)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9732)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9733) Power Cord - Brazil

This feature provides two 2.8 meter 10A/250V, C13 to NBR 6147 power cords.

  • For 4662-12G: (#9733)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9733)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9733)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9733)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9734) Power Cord - India

This feature provides two 2.8 meter 10A/250V, C13 to IS 6538 power cords.

  • For 4662-12G: (#9734)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9734)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9734)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9734)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9735) Power Cord - Japan

This feature provides two 4.3 meter 12A/125V, C13 to JIS C-8303 power cords.

  • For 4662-12G: (#9735)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9735)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9736) Power Cord - Korea

This feature provides two 2.8 meter 12A/250V, C13 to KS C8305 power cords.

  • For 4662-12G: (#9736)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9736)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-6H2: (#9736)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-UH6: (#9736)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#9737) Power Cord - Chicago

This feature provides two 1.8 meter 15A/125V, C13 to NEMA 5-15P power cords.

  • For 4662-12G: (#9737)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
  • For 4662-24G: (#9737)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • One power cord feature (97xx or AHPx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per power cord feature.
(#A2EV) RFID AG/AP: 902-928 Mhz

This feature provides a 902 - 928 MHz RFID tag for asset tracking.

  • For 4662-12G: (#A2EV)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 902 to 928 MHz RFID tag for asset tracking.
  • For 4662-24G: (#A2EV)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 902 to 928 MHz RFID tag for asset tracking.
  • For 4662-6H2: (#A2EV)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 902 to 928 MHz RFID tag for asset tracking.
  • For 4662-92G: (#A2EV)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 902 to 928 MHz RFID tag for asset tracking.
  • For 4662-UH6: (#A2EV)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 902 to 928 MHz RFID tag for asset tracking.
(#A2EW) RFID EMEA: 865.6-867.8 Mhz

This feature provides a 865.6 - 867.8 MHz RFID tag for asset tracking.

  • For 4662-12G: (#A2EW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 865.6 to 867.8 MHz RFID tag for asset tracking.
  • For 4662-24G: (#A2EW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 865.6 to 867.8 MHz RFID tag for asset tracking.
  • For 4662-6H2: (#A2EW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 865.6 to 867.8 MHz RFID tag for asset tracking.
  • For 4662-92G: (#A2EW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 865.6 to 867.8 MHz RFID tag for asset tracking.
  • For 4662-UH6: (#A2EW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: This feature provides a 865.6 to 867.8 MHz RFID tag for asset tracking.
(#ACHP) 25 GbE Shortwave SFP28 Transceivers (Four)

This feature provides four 25 Gb shortwave SFP28 transceivers to populate a pair of 25/10 GbE host interface cards. These transceivers are used to set the card ports to 25Gb.

  • For 4662-6H2: (#ACHP)
    • Minimum required: 0
    • Maximum allowed:
      • One when the quantities of features ALBM and ALBN is one.
      • Two when the quantities of features ALBM and ALBN is two.
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Selection of feature ACHP, ACHQ, and ACJ2 are optional when configuring a 25/10 GbE adapter feature.
      • Maximum allowed applies to total quantity of all Ethernet SFPs (features ACHP, ACHQ, ACJ2).
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 is present on the order, maximum allowed is 255.
      • When feature ADNR is present on the order, maximum allowed is 255 per feature and requisite features are not applicable.
  • For 4662-UH6: (#ACHP)
    • Minimum required: 0
    • Maximum allowed:
      • One when the quantities of features ALBM and ALBN is one.
      • Two when the quantities of features ALBM and ALBN is two.
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Selection of feature ACHP, ACHQ, and ACJ2 are optional when configuring a 25/10 GbE adapter feature.
      • Maximum allowed applies to total quantity of all Ethernet SFPs (features ACHP, ACHQ, ACJ2).
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 is present on the order, maximum allowed is 255.
      • When feature ADNR is present on the order, maximum allowed is 255 per feature and requisite features are not applicable.
(#ACHQ) 10 GbE Shortwave SFP+ Transceivers (Four)

This feature provides four 10 Gb shortwave SFP+ transceivers to populate a pair of 25/10 GbE host interface cards. These transceivers are used to set the card ports to 10Gb.

  • For 4662-6H2: (#ACHQ)
    • Minimum required: 0
    • Maximum allowed:
      • One when the quantities of features ALBM and ALBN is one.
      • Two when the quantities of features ALBM and ALBN is two.
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Selection of feature ACHP, ACHQ, and ACJ2 are optional when configuring a 25/10 GbE adapter feature.
      • Maximum allowed applies to total quantity of all Ethernet SFPs (features ACHP, ACHQ, ACJ2).
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 is present on the order, maximum allowed is 255.
      • When feature ADNR is present on the order, maximum allowed is 255 per feature and requisite features are not applicable.
  • For 4662-UH6: (#ACHQ)
    • Minimum required: 0
    • Maximum allowed:
      • One when the quantities of features ALBM and ALBN is one.
      • Two when the quantities of features ALBM and ALBN is two.
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Selection of feature ACHP, ACHQ, and ACJ2 are optional when configuring a 25/10 GbE adapter feature.
      • Maximum allowed applies to total quantity of all Ethernet SFPs (features ACHP, ACHQ, ACJ2).
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 is present on the order, maximum allowed is 255.
      • When feature ADNR is present on the order, maximum allowed is 255 per feature and requisite features are not applicable.
(#ACHU) 16 Gb FC Longwave SFP Transceivers (Pair)

This feature provides two 16 Gb longwave SFP transceivers for use with 16 Gb FC I/O ports.

  • For 4662-6H2: (#ACHU)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBJ is required.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255.
  • For 4662-UH6: (#ACHU)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBJ is required.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255.
(#ACJ2) 10GbE SFP+ RJ45 Transceivers (Four)

This feature provides four 10GbE SFP+ to RJ45 transceivers.

  • Minimum required: 0
  • Maximum allowed:
    • One for each feature code ALBM or ALBM.
    • Two for each feature code ALBL
  • Customer Setup: Yes
  • Comments:
    • Requires feature ALBL, ALBM or ALBN
    • When feature 5555 is present on the order, maximum allowed is 255.
    • When feature ADNR is present on the order, maximum allowed is 255 per feature and requisite features are not applicable.
  • Plant / Field installable: Both
(#ACSQ) 1m OM3 Fiber Cable (LC)

These features provide a 50.0/125 micrometer OM3 fiber optic cable terminated with LC Duplex connectors. They are used to connect Ethernet and FC ports to server or fabric ports.

  • For 4662-6H2: (#ACSQ)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
  • For 4662-UH6: (#ACSQ)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
(#ACSR) 5m OM3 Fiber Cable (LC)

These features provide a 50.0/125 micrometer OM3 fiber optic cable terminated with LC Duplex connectors. They are used to connect Ethernet and FC ports to server or fabric ports.

  • For 4662-6H2: (#ACSR)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
  • For 4662-UH6: (#ACSR)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
(#ACSS) 10m OM3 Fiber Cable (LC)

These features provide a 50.0/125 micrometer OM3 fiber optic cable terminated with LC Duplex connectors. They are used to connect Ethernet and FC ports to server or fabric ports.

  • For 4662-6H2: (#ACSS)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
  • For 4662-UH6: (#ACSS)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
(#ACST) 25m OM3 Fiber Cable (LC)

These features provide a 50.0/125 micrometer OM3 fiber optic cable terminated with LC Duplex connectors. They are used to connect Ethernet and FC ports to server or fabric ports.

  • For 4662-6H2: (#ACST)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
  • For 4662-UH6: (#ACST)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 16)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • A Fibre Channel or Ethernet adapter card feature is required (ALBJ, ALBK, ALBL, ALBM, ALBN, ALB3, ALB5)
      • Maximum allowed applies to total quantity of all fiber optic cable features.
      • Total quantity of all fiber optic cable features cannot exceed sixteen.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
(#ACUA) 0.6m 12 Gb SAS Cable (mSAS HD to mSAS HD)

This feature provides a 12 Gb mini-SAS HD 4x cable terminated with SFF-8644 (HD) connectors. They are used to connect a FlashSystem expansion enclosure to a FlashSystem control enclosure or to another FlashSystem expansion enclosure.

  • For 4662-12G: (#ACUA)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: Preselect a quantity two of feature ACUA
  • For 4662-24G: (#ACUA)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: Preselect a quantity two of feature ACUA
  • For 4662-6H2: (#ACUA)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA
  • For 4662-UH6: (#ACUA)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA
(#ACUB) 1.5m 12 Gb SAS Cable (mSAS HD to mSAS HD)

This feature provides a 12 Gb mini-SAS HD 4x cable terminated with SFF-8644 (HD) connectors. They are used to connect a FlashSystem expansion enclosure to a FlashSystem control enclosure or to another FlashSystem expansion enclosure.

  • For 4662-12G: (#ACUB)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
  • For 4662-24G: (#ACUB)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
  • For 4662-6H2: (#ACUB)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA
  • For 4662-UH6: (#ACUB)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA
(#ACUC) 3m 12 Gb SAS Cable (mSAS HD to mSAS HD)

This feature provides a 12 Gb mini-SAS HD 4x cable terminated with SFF-8644 (HD) connectors. They are used to connect a FlashSystem expansion enclosure to a FlashSystem control enclosure or to another FlashSystem expansion enclosure.

  • For 4662-12G: (#ACUC)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
  • For 4662-24G: (#ACUC)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
  • For 4662-6H2: (#ACUC)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA. For Model 92G, preselect quantity two of feature ACUC.
  • For 4662-92G: (#ACUC)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: Preselect a quantity two of feature ACUC
  • For 4662-UH6: (#ACUC)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA. For Model 92G, preselect quantity two of feature ACUC.
(#ACUE) 6m 12 Gb SAS Cable (mSAS HD to mSAS HD)

This feature provides a 12 Gb mini-SAS HD 4x cable terminated with SFF-8644 (HD) connectors. They are used to connect a FlashSystem expansion enclosure to a FlashSystem control enclosure or to another FlashSystem expansion enclosure.

  • For 4662-12G: (#ACUE)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: Preselect a quantity two of feature ACUA
  • For 4662-24G: (#ACUE)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
  • For 4662-6H2: (#ACUE)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA. For Model 92G, preselect quantity two of feature ACUC.
  • For 4662-92G: (#ACUE)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
  • For 4662-UH6: (#ACUE)
    • Minimum required: 0
    • Maximum allowed: 8 (Initial order maximum: 8)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ALBP is required on Models 6H2, UH6
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum 8 on control enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • Maximum 2 on expansion enclosures allowed applies to total quantity of all SAS cables features (ACUx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per cable feature.
      • e-config: For Models 12G and 24G, preselect a quantity two of feature ACUA. For Model 92G, preselect quantity two of feature ACUC.
(#ACZA) Generic Bezel

This feature provides a generic bezel set (one left bezel and one right bezel). The generic bezels are installed on the enclosures by IBM Manufacturing instead of the standard IBM-logo'ed bezels. It is intended for systems used in customized OEM solutions.

  • For 4662-12G: (#ACZA)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-24G: (#ACZA)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-6H2: (#ACZA)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-92G: (#ACZA)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-UH6: (#ACZA)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
(#ACZF) Generic Packaging

This feature provides a generic outer carton. The system will be shipped by IBM Manufacturing in the generic outer carton instead of the standard IBM-logo'ed carton. It is intended for systems used in customized OEM solutions.

  • For 4662-12G: (#ACZF)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-24G: (#ACZF)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-6H2: (#ACZF)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-92G: (#ACZF)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
  • For 4662-UH6: (#ACZF)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: Not compatible with feature ADN2.
(#ADN1) Order Type 1 Indicator - CTO

This feature indicates a configure to order (CTO) new machine order comprised of a model with required and optional features (a standard order). It is used for order routing.

  • For 4662-12G: (#ADN1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
  • For 4662-24G: (#ADN1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
  • For 4662-6H2: (#ADN1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
  • For 4662-92G: (#ADN1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
  • For 4662-UH6: (#ADN1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
(#ADN2) Order Type 2 Indicator - MTM Only

This feature indicates a new machine order comprised of a model only with no features except as indicated below. It is used for order routing.

  • For 4662-12G: (#ADN2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
      • e-config: The following standard order requirements apply to the initial machine order: Selection of a power supply feature.Specification of a shipping and handling charge feature.Only the following optional features or products are allowed on the initial machine order: TAA features.No other optional software or products (such as expansion enclosures, SAN switches, and services) are allowed on the initial machine order.Model but do not display or allow user selection.
  • For 4662-24G: (#ADN2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
      • e-config: The following standard order requirements apply to the initial machine order: Selection of a power supply feature.Specification of a shipping and handling charge feature.Only the following optional features or products are allowed on the initial machine order: TAA features.No other optional software or products (such as expansion enclosures, SAN switches, and services) are allowed on the initial machine order.Model but do not display or allow user selection.
  • For 4662-6H2: (#ADN2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
      • e-config: The following standard order requirements apply to the initial machine order: Selection of a power supply feature.Specification of a shipping and handling charge feature.Only the following optional features or products are allowed on the initial machine order: TAA features.No other optional software or products (such as expansion enclosures, SAN switches, and services) are allowed on the initial machine order.Model but do not display or allow user selection.
  • For 4662-92G: (#ADN2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
      • e-config: The following standard order requirements apply to the initial machine order: Selection of a power supply feature.Specification of a shipping and handling charge feature.Only the following optional features or products are allowed on the initial machine order: TAA features.No other optional software or products (such as expansion enclosures, SAN switches, and services) are allowed on the initial machine order.Model but do not display or allow user selection.
  • For 4662-UH6: (#ADN2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Feature ADN1 or ADN2 must be specified on every initial machine order.
      • Maximum allowed applies to total quantity of feature ADN1 and ADN2.
      • e-config: The following standard order requirements apply to the initial machine order: Selection of a power supply feature.Specification of a shipping and handling charge feature.Only the following optional features or products are allowed on the initial machine order: TAA features.No other optional software or products (such as expansion enclosures, SAN switches, and services) are allowed on the initial machine order.Model but do not display or allow user selection.
(#ADN3) Order Type 3 Indicator - FC Only

This feature indicates an order comprised of features only (a field install / MES upgrade order / bulk order). It is used for order routing.

  • For 4662-12G: (#ADN3)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 0)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • This feature must be specified on every field install order, including Blue Harmony MEB orders.
      • e-config: Testing of the 255 maximum allowed is not required.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-24G: (#ADN3)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 0)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • This feature must be specified on every field install order, including Blue Harmony MEB orders.
      • e-config: Testing of the 255 maximum allowed is not required.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-6H2: (#ADN3)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • This feature must be specified on every field install order, including Blue Harmony MEB orders.
      • e-config: Testing of the 255 maximum allowed is not required.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-92G: (#ADN3)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 0)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • This feature must be specified on every field install order, including Blue Harmony MEB orders.
      • e-config: Testing of the 255 maximum allowed is not required.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-UH6: (#ADN3)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • This feature must be specified on every field install order, including Blue Harmony MEB orders.
      • e-config: Testing of the 255 maximum allowed is not required.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
(#ADNR) No Rules Order Indicator

This feature indicates the order will not be validated by e-config and bulk ordering for inventory stocking purposes is allowed. When this feature is specified on an order or present on the machine inventory record, select features can be ordered at a maximum quantity of 255. If this feature is present on the machine (regardless of whether it was specified with the initial machine order or during a field upgrade to the machine), all subsequent field upgrade orders will not be validated by e-config.

  • For 4662-12G: (#ADNR)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ADN2 is required on plant install orders.
      • See feature ADN2 for plant install compatibility statements.
      • e-config: Testing of the 255 maximum allowed is not required.Password protect this feature.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-24G: (#ADNR)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ADN2 is required on plant install orders.
      • See feature ADN2 for plant install compatibility statements.
      • e-config: Testing of the 255 maximum allowed is not required.Password protect this feature.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-6H2: (#ADNR)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ADN2 is required on plant install orders.
      • See feature ADN2 for plant install compatibility statements.
      • e-config: Testing of the 255 maximum allowed is not required.Password protect this feature.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-92G: (#ADNR)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ADN2 is required on plant install orders.
      • See feature ADN2 for plant install compatibility statements.
      • e-config: Testing of the 255 maximum allowed is not required.Password protect this feature.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • For 4662-UH6: (#ADNR)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Feature ADN2 is required on plant install orders.
      • See feature ADN2 for plant install compatibility statements.
      • e-config: Testing of the 255 maximum allowed is not required.Password protect this feature.
      • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
(#ADZ1) Non-China origin

This feature specifies the machine will have a country of origin other than China.

  • For 4662-12G: (#ADZ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: For all countries except U.S and China, model this featur e and allow user selection of this feature with i-listed RPQ 8S1795
      • e-config: For U.S., China and India do not display nor allow user selection of this feature.
  • For 4662-24G: (#ADZ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: For all countries except U.S and China, model this featur e and allow user selection of this feature with i-listed RPQ 8S1795
      • e-config: For U.S., China and India do not display nor allow user selection of this feature.
  • For 4662-6H2: (#ADZ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: For all countries except U.S and China, model this featur e and allow user selection of this feature with i-listed RPQ 8S1795
      • e-config: For U.S., China and India do not display nor allow user selection of this feature.
  • For 4662-92G: (#ADZ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: For all countries except U.S and China, model this featur e and allow user selection of this feature with i-listed RPQ 8S1795
      • e-config: For U.S., China and India do not display nor allow user selection of this feature.
  • For 4662-UH6: (#ADZ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: For all countries except U.S and China, model this featur e and allow user selection of this feature with i-listed RPQ 8S1795
      • e-config: For U.S., China and India do not display nor allow user selection of this feature.
(#AE00) Variable Usage 1TB/month

This feature is used to purchase the variable capacity used in the utility model. The feature provides (feature AE00: 1, AE01: 10, AE02: 100) TB of capacity beyond the base subscription on the system. Usage is based upon the average capacity used, per month. The total of the prior three months' usage should be totaled, and the corresponding number of AE00, AE01, and AE02 features ordered quarterly.

  • For 4662-UH6: (#AE00)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Supported on Models UH6 only
(#AE01) Variable Usage 10TB/month

This feature is used to purchase the variable capacity used in the utility model. The feature provides (feature AE00: 1, AE01: 10, AE02: 100) TB of capacity beyond the base subscription on the system. Usage is based upon the average capacity used, per month. The total of the prior three months' usage should be totaled, and the corresponding number of AE00, AE01, and AE02 features ordered quarterly.

  • For 4662-UH6: (#AE01)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Supported on Models UH6 only
(#AE02) Variable Usage 100TB/month

This feature is used to purchase the variable capacity used in the utility model. The feature provides (feature AE00: 1, AE01: 10, AE02: 100) TB of capacity beyond the base subscription on the system. Usage is based upon the average capacity used, per month. The total of the prior three months' usage should be totaled, and the corresponding number of AE00, AE01, and AE02 features ordered quarterly.

  • For 4662-UH6: (#AE02)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments: Supported on Models UH6 only
(#AG00) Shipping and Handling - No Charge

This feature indicates that the order will have no shipping and handling charges.

  • For 4662-12G: (#AG00)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-24G: (#AG00)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-6H2: (#AG00)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-92G: (#AG00)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-UH6: (#AG00)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
(#AGJW) Shipping and Handling

This feature indicate that the machine order will have a shipping and handling charge.

  • For 4662-12G: (#AGJW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-24G: (#AGJW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-6H2: (#AGJW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-92G: (#AGJW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
  • For 4662-UH6: (#AGJW)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • One shipping and handling charge feature (AGxx) must be specified with every machine order.
      • Maximum allowed applies to total quantity of all shipping and handling features.
(#AGS5) 4.8 TB NVMe Flash Core Module

This feature provides one NVMe FlashCore Module drive.

  • For 4662-6H2: (#AGS5)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGS5)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGS6) 9.6 TB NVMe Flash Core Module

This feature provides one NVMe FlashCore Module drive.

  • For 4662-6H2: (#AGS6)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGS6)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGS7) 19.2 TB NVMe Flash Core Module

This feature provides one NVMe FlashCore Module drive.

  • For 4662-6H2: (#AGS7)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGS7)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGS8) 38.4 TB NVMe Flash Core Module

This feature provides one NVMe FlashCore Module drive.

  • For 4662-6H2: (#AGS8)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGS8)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: MES (Both for India only)
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGSA) 4.8TB FlashCore Module 3

This feature provides one NVMe FlashCore Module.

  • Minimum required: 0
  • Maximum allowed: 12 (Initial order maximum: 12)
  • Customer Setup: Yes
  • Comments:
    • Maximum allowed applies to total quantity of all FCM drive features (features AGSx and AGTx).
    • Supports 3:1 compression with the appropriate workloads
    • Generation 3 FCM drives cannot be used in the same RAID array as previous FCM drives (features AGS5, AGS6, AGS7 and AGS8)
  • Plant / Field installable: Both
(#AGSB) 9.6TB FlashCore Module 3

This feature provides one NVMe FlashCore Module.

  • Minimum required: 0
  • Maximum allowed: 12 (Initial order maximum: 12)
  • Customer Setup: Yes
  • Comments:
    • Maximum allowed applies to total quantity of all FCM drive features (features AGSx and AGTx).
    • Supports 3:1 compression with the appropriate workloads
    • Generation 3 FCM drives cannot be used in the same RAID array as previous FCM drives (features AGS5, AGS6, AGS7 and AGS8)
  • Plant / Field installable: Both
(#AGSC) 19.2TB FlashCore Module 3

This feature provides one NVMe FlashCore Module.

  • Minimum required: 0
  • Maximum allowed: 12 (Initial order maximum: 12)
  • Customer Setup: Yes
  • Comments:
    • Maximum allowed applies to total quantity of all FCM drive features (features AGSx and AGTx).
    • Supports 3:1 compression with the appropriate workloads
    • Generation 3 FCM drives cannot be used in the same RAID array as previous FCM drives (features AGS5, AGS6, AGS7 and AGS8)
  • Plant / Field installable: Both
(#AGSD) 38.4TB FlashCore Module 3

This feature provides one NVMe FlashCore Module.

  • Minimum required: 0
  • Maximum allowed: 12 (Initial order maximum: 12)
  • Customer Setup: Yes
  • Comments:
    • Maximum allowed applies to total quantity of all FCM drive features (features AGSx and AGTx).
    • Supports 3:1 compression with the appropriate workloads
    • Generation 3 FCM drives cannot be used in the same RAID array as previous FCM drives (features AGS5, AGS6, AGS7 and AGS8)
  • Plant / Field installable: Both
(#AGT1) 800 GB NVMe Flash Drive

(No Longer Available as of January 14, 2023)(For model 6H2)

(No Longer Available as of January 14, 2023)(For model UH6)

This feature provides one NVMe solid state drive.

  • For 4662-6H2: (#AGT1)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGT1)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGT2) 1.92 TB NVMe Flash Drive

This feature provides one NVMe solid state drive.

  • For 4662-6H2: (#AGT2)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGT2)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGT3) 3.84 TB NVMe Flash Drive

This feature provides one NVMe solid state drive.

  • For 4662-6H2: (#AGT3)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGT3)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGT4) 7.68 TB NVMe Flash Drive

This feature provides one NVMe solid state drive.

  • For 4662-6H2: (#AGT4)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGT4)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGT5) 15.36 TB NVMe Flash Drive

This feature provides one NVMe solid state drive.

  • For 4662-6H2: (#AGT5)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGT5)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGT6) 30.72TB NVMe Flash Drive

This feature provides one NVMe solid state drive.

  • Minimum required: 0
  • Maximum allowed: 12 (Initial order maximum: 12)
  • Customer Setup: Yes
  • Comments:
    • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
  • Plant / Field installable: Both
(#AGTA) 375 GB NVMe Storage Class Memory Drive

(No Longer Available as of July 16, 2022)(For model 6H2)

(No Longer Available as of July 16, 2022)(For model UH6)

This feature provides one NVMe Storage Class Memory drive.

  • For 4662-6H2: (#AGTA)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGTA)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGTB) 750 GB NVMe Storage Class Memory Drive

(No Longer Available as of July 16, 2022)(For model 6H2)

(No Longer Available as of July 16, 2022)(For model UH6)

This feature provides one NVMe Storage Class Memory drive.

  • For 4662-6H2: (#AGTB)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGTB)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGTE) 800 GB NVMe Storage Class Memory Drive

(No Longer Available as of July 16, 2022)(For model 6H2)

(No Longer Available as of July 16, 2022)(For model UH6)

This feature provides one NVMe Storage Class Memory drive.

  • For 4662-6H2: (#AGTE)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGTE)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AGTF) 1.6 TB NVMe Storage Class Memory Drive

This feature provides one NVMe Storage Class Memory drive.

  • For 4662-6H2: (#AGTF)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
  • For 4662-UH6: (#AGTF)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all NVMe drive features (features AGSx and AGTx).
      • Not compatible with feature ADN2 on the initial machine order.
(#AHP5) Power Cord - PDU High Density Expansion

This feature provides two 2.0 meter rack power distribution unit (PDU) C19 to C20 power cords.

  • For 4662-92G: (#AHP5)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Selection of this feature is mandatory with Model 92G. Maximum allowed applies to total quantity of all power cord features.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255.
      • e-config: Preselect a quantity one and don't allow it to be removed from the order.
(#AHP6) Power Cord - PDU Connection (C20)

This feature provides two 2.8 meter rack power distribution unit (PDU) C13 to C20 power cords.

  • For 4662-12G: (#AHP6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all power cord features (features 97xx of AHPx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255.
      • e-config: For Australia, Korea, New Zealand and People's Republic of China, do not allow field upgrades of this feature.
  • For 4662-24G: (#AHP6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all power cord features (features 97xx of AHPx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255.
      • e-config: For Australia, Korea, New Zealand and People's Republic of China, do not allow field upgrades of this feature.
  • For 4662-6H2: (#AHP6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all power cord features (features 97xx of AHPx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255.
      • e-config: For Australia, Korea, New Zealand and People's Republic of China, do not allow field upgrades of this feature.
  • For 4662-UH6: (#AHP6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all power cord features (features 97xx of AHPx).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255.
      • e-config: For Australia, Korea, New Zealand and People's Republic of China, do not allow field upgrades of this feature.
(#AHPA) AC Power Supply High Efficiency (Pair)

AC Power Supply High Efficiency (Pair)

  • For 4662-12G: (#AHPA)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features 5555 or ADNR
      • e-config: Do not show an option to select this feature. Auto-select quantity 1 on 2U expansion enclosures.
  • For 4662-24G: (#AHPA)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features 5555 or ADNR
      • e-config: Do not show an option to select this feature. Auto-select quantity 1 on 2U expansion enclosures.
(#AHPE) AC Power Supply (Pair)

This feature is mandatory and indicates the base machine is configured with two high efficiency ac power supplies (200 - 240 volts).

  • For 4662-6H2: (#AHPE)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features 5555 or ADNR
      • e-config: Do not show an option to select this feature. Auto-select quantity 1 on control enclosures.
  • For 4662-UH6: (#AHPE)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features 5555 or ADNR
      • e-config: Do not show an option to select this feature. Auto-select quantity 1 on control enclosures.
(#AHY1) Storage as a Service Indicator

This feature indicates the machine is being deployed under a Storage as a Service offering. It is for administrative purposes only and does not affect the technical capabilities of the machine.

  • For 4662-6H2: (#AHY1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with feature ALH0.
      • e-config: Auto-add this feature when a STaaS config is imported from a STORM configuration.
  • For 4662-UH6: (#AHY1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with feature ALH0.
      • e-config: Auto-add this feature when a STaaS config is imported from a STORM configuration.
  • For 4662-12G: (#AHY1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with feature ALH0.
      • e-config: Auto-add this feature when a STaaS config is imported from a STORM configuration.
  • For 4662-24G: (#AHY1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with feature ALH0.
      • e-config: Auto-add this feature when a STaaS config is imported from a STORM configuration.
  • For 4662-92G: (#AHY1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with feature ALH0.
      • e-config: Auto-add this feature when a STaaS config is imported from a STORM configuration.
(#AHY2) Future use - reserved 2

This feature is reserved for future use.

  • For 4662-12G: (#AHY2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHY3) Future use - reserved 3

This feature is reserved for future use.

  • For 4662-12G: (#AHY3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHY4) Future use - reserved 4

This feature is reserved for future use.

  • For 4662-12G: (#AHY4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHY5) Future use - reserved 5

This feature is reserved for future use.

  • For 4662-12G: (#AHY5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHY6) Future use - reserved 6

This feature is reserved for future use.

  • For 4662-12G: (#AHY6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY6)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHY7) Future use - reserved 7

This feature is reserved for future use.

  • For 4662-12G: (#AHY7)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY7)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY7)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY7)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY7)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHY8) Future use - reserved 8

This feature is reserved for future use.

  • For 4662-12G: (#AHY8)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY8)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY8)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY8)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • '-e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY8)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHY9) Future use - reserved 9

This feature is reserved for future use.

  • For 4662-12G: (#AHY9)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-24G: (#AHY9)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-6H2: (#AHY9)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-92G: (#AHY9)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
  • For 4662-UH6: (#AHY9)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#AHZC) VersaStack Solution Indicator

This feature indicates the machine is a component within a VersaStack Solution.

  • For 4662-12G: (#AHZC)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Auto select on models 12G and 24G ordered in conjunction with a model 6H2, UH6 with feature AHZC.
      • Do not model for models 12G and 24G on standalone orders.
  • For 4662-24G: (#AHZC)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Auto select on models 12G and 24G ordered in conjunction with a model 6H2, UH6 with feature AHZC.
      • Do not model for models 12G and 24G on standalone orders.
  • For 4662-6H2: (#AHZC)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Auto select on models 12G and 24G ordered in conjunction with a model 6H2, UH6 with feature AHZC.
      • Do not model for models 12G and 24G on standalone orders.
  • For 4662-92G: (#AHZC)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Auto select on models 12G and 24G ordered in conjunction with a model 6H2, UH6 with feature AHZC.
      • Do not model for models 12G and 24G on standalone orders.
  • For 4662-UH6: (#AHZC)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Auto select on models 12G and 24G ordered in conjunction with a model 6H2, UH6 with feature AHZC.
      • Do not model for models 12G and 24G on standalone orders.
(#AHZD) All Flash Solution Indicator

This feature indicates the machine is configured as an All Flash Solution and hard disk drives are not allowed for selection.

  • For 4662-24G: (#AHZD)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZE and EFD0.
      • e-config: Pre-select this feature on Models 6H2, UH6. Auto-select on Models 24G, 92G when ordered in conjunction with a Model 6H2, UH6 with feature AHZD. Do not display or allow the selection of Model 12G when this feature is present on the initial order. Do not display or allow the selection of disk drive features on expansion enclosures (features AL43 - AL4D, AL68 - AL76) when this feature is present on the order.
  • For 4662-6H2: (#AHZD)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZE and EFD0.
      • e-config: Pre-select this feature on Models 6H2, UH6. Auto-select on Models 24G, 92G when ordered in conjunction with a Model 6H2, UH6 with feature AHZD. Do not display or allow the selection of Model 12G when this feature is present on the initial order. Do not display or allow the selection of disk drive features on expansion enclosures (features AL43 - AL4D, AL68 - AL76) when this feature is present on the order.
  • For 4662-92G: (#AHZD)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZE and EFD0.
      • e-config: Pre-select this feature on Models 6H2, UH6. Auto-select on Models 24G, 92G when ordered in conjunction with a Model 6H2, UH6 with feature AHZD. Do not display or allow the selection of Model 12G when this feature is present on the initial order. Do not display or allow the selection of disk drive features on expansion enclosures (features AL43 - AL4D, AL68 - AL76) when this feature is present on the order.
  • For 4662-UH6: (#AHZD)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZE and EFD0.
      • e-config: Pre-select this feature on Models 6H2, UH6. Auto-select on Models 24G, 92G when ordered in conjunction with a Model 6H2, UH6 with feature AHZD. Do not display or allow the selection of Model 12G when this feature is present on the initial order. Do not display or allow the selection of disk drive features on expansion enclosures (features AL43 - AL4D, AL68 - AL76) when this feature is present on the order.
(#AHZE) Hybrid Flash Indicator

This feature indicates the machine is configured as an Hybrid Flash Solution and and a combination of flash and disk drives is allowed.

  • For 4662-12G: (#AHZE)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZD and EFD0.
      • e-config:-
      • Auto-select on Models 12G, 24G, 92G when ordered in conjunction with a Models 6H2, UH6 with feature AHZE.
  • For 4662-24G: (#AHZE)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZD and EFD0.
      • e-config:-
      • Auto-select on Models 12G, 24G, 92G when ordered in conjunction with a Models 6H2, UH6 with feature AHZE.
  • For 4662-6H2: (#AHZE)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZD and EFD0.
      • e-config:-
      • Auto-select on Models 12G, 24G, 92G when ordered in conjunction with a Models 6H2, UH6 with feature AHZE.
  • For 4662-92G: (#AHZE)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZD and EFD0.
      • e-config:-
      • Auto-select on Models 12G, 24G, 92G when ordered in conjunction with a Models 6H2, UH6 with feature AHZE.
  • For 4662-UH6: (#AHZE)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, AHZD and EFD0.
      • e-config:-
      • Auto-select on Models 12G, 24G, 92G when ordered in conjunction with a Models 6H2, UH6 with feature AHZE.
(#AJGH) Red Hat OpenShift Indicator

This feature indicates the machine is a component within a RedHat OpenShift Solution.

  • For 4662-6H2: (#AJGH)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, and EFD0.
  • For 4662-UH6: (#AJGH)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Not compatible with features ADN2, and EFD0.
(#AL27) 900 GB 10,000 rpm 12 Gb SAS 3.5 Inch HDD

(No Longer Available as of January 08, 2022)(For model 12G)

This feature provides one 12 Gb disk drive. This is a 2.5-inch disk drive packaged in a 3.5-inch carrier.

  • For 4662-12G: (#AL27)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL28) 1.2 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD

This feature provides one 12 Gb disk drive. This is a 2.5-inch disk drive packaged in a 3.5-inch carrier.

  • For 4662-12G: (#AL28)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL29) 1.8 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD

This feature provides one 12 Gb disk drive. This is a 2.5-inch disk drive packaged in a 3.5-inch carrier.

  • For 4662-12G: (#AL29)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL2A) 2.4 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD

This feature provides one 12 Gb disk drive. This is a 2.5-inch disk drive packaged in a 3.5-inch carrier.

  • For 4662-12G: (#AL2A)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL39) 4 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

(No Longer Available as of January 08, 2022)(For model 12G)

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL39)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL3A) 6 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL3A)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL3B) 8 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL3B)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL3C) 10 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL3C)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL3D) 12 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL3D)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL3E) 14 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL3E)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL3F) 16 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL3F)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL3G) 18 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-12G: (#AL3G)
    • Minimum required: 0
    • Maximum allowed: 12 (Initial order maximum: 12)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 3.5-inch drive features (AL2x, and AL3x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL43) 1.2 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL43)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL44) 1.8 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL44)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL45) 2.4 TB 10,000 rpm 12 Gb SAS 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL45)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL47) 6 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL47)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL48) 8 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL48)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL49) 10 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL49)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4A) 12 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL4A)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4B) 14 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL4B)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4C) 16 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL4C)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4D) 18 TB 7,200 rpm 12 Gb SAS NL 3.5 Inch HDD

This feature provides one 12 Gb SAS disk.

  • For 4662-92G: (#AL4D)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4J) 1.92TB 12 Gb SAS 3.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-92G: (#AL4J)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4K) 3.84TB 12 Gb SAS 3.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-92G: (#AL4K)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4L) 7.68TB 12 Gb SAS 3.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-92G: (#AL4L)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4M) 15.36TB 12 Gb SAS 3.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-92G: (#AL4M)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL4N) 30.72TB 12 Gb SAS 3.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-92G: (#AL4N)
    • Minimum required: 0
    • Maximum allowed: 92 (Initial order maximum: 92)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all High Density expansion enclosure 3.5-inch drive features (AL4x).
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL68) 900 GB 10,000 rpm 12 Gb SAS 2.5 Inch HDD

(No Longer Available as of January 08, 2022)(For model 24G)

This feature provides one 12 Gb disk drive.

  • For 4662-24G: (#AL68)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL69) 1.2 TB 10,000 rpm 12 Gb SAS 2.5 Inch HDD

This feature provides one 12 Gb disk drive.

  • For 4662-24G: (#AL69)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL6A) 1.8 TB 10,000 rpm 12 Gb SAS 2.5 Inch HDD

This feature provides one 12 Gb disk drive.

  • For 4662-24G: (#AL6A)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL6B) 2.4 TB 10,000 rpm 12 Gb SAS 2.5 Inch HDD

This feature provides one 12 Gb disk drive.

  • For 4662-24G: (#AL6B)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL76) 2 TB 7,200 rpm 12 Gb SAS NL 2.5 Inch HDD

(No Longer Available as of January 08, 2022)(For model 24G)

This feature provides one 12 Gb disk drive.

  • For 4662-24G: (#AL76)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL80) 1.92TB 12 Gb SAS 2.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-24G: (#AL80)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL81) 3.84TB 12 Gb SAS 2.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-24G: (#AL81)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL82) 7.68TB 12 Gb SAS 2.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-24G: (#AL82)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL83) 15.36TB 12 Gb SAS 2.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-24G: (#AL83)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL84) 30.72TB 12 Gb SAS 2.5 Inch Flash Drive

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-24G: (#AL84)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#AL8A) 800 GB 3DWPD 12 Gb SAS 2.5 Inch Flash Drive

(No Longer Available as of January 14, 2023)(For model 24G)

This feature provides one 12 Gb SAS solid state drive.

  • For 4662-24G: (#AL8A)
    • Minimum required: 0
    • Maximum allowed: 24 (Initial order maximum: 24)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • Maximum allowed applies to total quantity of all 2.5-inch drive features (AL6x, AL7x, and AL8x)
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per drive feature.
(#ALB3) 16 Gb FC 4 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards, each with four 16 Gb FC ports and shortwave SFP transceivers. It is used to add 16 Gb FC connectivity to the FlashSystem control enclosure.

This card also supports longwave transceivers that can be intermixed on the card with shortwave transceivers in any combination. Longwave transceivers are ordered using feature ACHU.

Refer to the Technical Description section for adapter configuration rules and cable requirements.

  • Minimum required: 0
  • Maximum allowed: 2 (Initial order maximum: 2)
  • Customer Setup: Yes
  • Comments:
    • Supported on Models 6H2 and UH6 only.
    • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
    • Not compatible with feature ALBP.
    • Not compatible with feature ADN2 on the initial machine order.
    • When feature 5555 is present on the order, maximum allowed is 255 per feature.
    • When feature ACWx or ADNR is present on the order, maximum allowed is 255 per feature and requisite features are not applicable.
    • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
  • Plant / Field install: Both.
(#ALB5) 32 Gb FC 2 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards, each with two 32 Gb FC ports and shortwave SFP transceivers. It is used to add 32 Gb FC connectivity to the FlashSystem control enclosure.

Refer to the Technical Description section for adapter configuration rules and cable requirements.

  • Minimum required: 0
  • Maximum allowed: 2 (Initial order maximum: 2)
  • Customer Setup: Yes
  • Comments:
    • Supported on Models 6H2 and UH6 only.
    • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
    • Not compatible with feature ADN2 on the initial machine order.
    • When feature 5555 is present on the order, maximum allowed is 255 per feature.
    • When feature ACWx or ADNR is present on the order, maximum allowed is 255 per feature and requisite features are not applicable.
    • EACM: Set Bulk MES flag to YES for this feature to enable use in Blue Harmony MEB orders.
    • e-config: Preselect quantity 1.
  • Plant / Field install: Both
(#ALBJ) 16 Gb FC 4 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards. It is used to add 16 Gb FC connectivity to the control enclosure. Refer to the Technical Description - Host Interface Cables section for cable requirements.

  • For 4662-6H2: (#ALBJ)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Field only.
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ALBP.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature
  • For 4662-UH6: (#ALBJ)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Field only.
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ALBP.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature
(#ALBK) 32 Gb FC 2 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards. It is used to add 32 Gb FC connectivity to the control enclosure. Refer to the Technical Description - Host Interface Cables section for cable requirements.

  • For 4662-6H2: (#ALBK)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Field only.
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
  • For 4662-UH6: (#ALBK)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Field only.
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
(#ALBL) 10 Gb Ethernet 4 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards with 10 Gb SFP+ transceivers. It is used to add 10 Gb FC connectivity to the control enclosure.

Refer to the Technical Description - Host Interface Cables section for cable requirements.

  • For 4662-6H2: (#ALBL)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • When this feature is selected, an additional SAS or FC host interface card feature (ALB3-ALBQ) can be selected for a maximum of 2 total host interface cards
      • Not compatible with feature ALBM, ALBN.
      • Not compatible with feature ADN2 on the initial machine order
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature
      • Supplied with 10 Gb SFP+ transceivers. Can also be used with ACJ2 or customers may supply their own cables (AOC, DAC, and splitters) if they are listed as supported in the product documentation.
      • e-config: If order contains both ACJ2 and ALBL, warn user if the order does not contain exactly 2 of ACJ2 for each 1 of ALBL
  • For 4662-UH6: (#ALBL)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • When this feature is selected, an additional SAS or FC host interface card feature (ALB3-ALBQ) can be selected for a maximum of 2 total host interface cards
      • Not compatible with feature ALBM, ALBN.
      • Not compatible with feature ADN2 on the initial machine order
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature
      • Supplied with 10 Gb SFP+ transceivers. Can also be used with ACJ2 or customers may supply their own cables (AOC, DAC, and splitters) if they are listed as supported in the product documentation.
      • e-config: If order contains both ACJ2 and ALBL, warn user if the order does not contain exactly 2 of ACJ2 for each 1 of ALBL
(#ALBM) 25/10 GbE (RoCE) 2 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards. The speed is determined by the selection of 10 Gb SFP+ or 25 Gb SFP28 transceivers, the adapter does not auto-negotiate the speed. It is used to add 25 Gb or 10 Gb Ethernet connectivity to the control enclosure and are designed to support RDMA with RoCE 2.
Note: This adapter does not support FCoE connectivity. Refer to the Technical Description - Host Interface Cables section for cable requirements.

  • For 4662-6H2: (#ALBM)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ALBL.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
      • Supplied without optics or cables. Can be ordered with ACHQ, ACHP or ACJ2 or customers may supply their own cables (AOC, DAC, and splitters) if they are listed as supported in the product documentation.
      • e-config: Warn user that no optics are included as per previous bullet, but allow cards to be ordered without any
  • For 4662-UH6: (#ALBM)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ALBL.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
      • Supplied without optics or cables. Can be ordered with ACHQ, ACHP or ACJ2 or customers may supply their own cables (AOC, DAC, and splitters) if they are listed as supported in the product documentation.
      • e-config: Warn user that no optics are included as per previous bullet, but allow cards to be ordered without any
(#ALBN) 25/10 GbE (iWARP) 2 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards. The speed is determined by the selection of 10 Gb SFP+ or 25 Gb SFP28 transceivers, the adapter does not auto-negotiate the speed. It is used to add 25 Gb or 10 Gb Ethernet connectivity to the control enclosure and are designed to support RDMA with iWARP.
Note: This adapter does not support FCoE connectivity. Refer to the Technical Description - Host Interface Cables section for cable requirements.

  • For 4662-6H2: (#ALBN)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ALBL.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
      • Supplied without optics or cables. Can be ordered with ACHQ, ACHP or ACJ2 or customers may supply their own cables (AOC, DAC, and splitters) if they are listed as supported in the product documentation.
      • e-config: Warn user that no optics are included as per previous bullet, but allow cards to be ordered without any
  • For 4662-UH6: (#ALBN)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Maximum allowed applies to total quantity of all adapter card features (features ALB3-ALBQ).
      • Not compatible with feature ALBL.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
      • Supplied without optics or cables. Can be ordered with ACHQ, ACHP or ACJ2 or customers may supply their own cables (AOC, DAC, and splitters) if they are listed as supported in the product documentation.
      • e-config: Warn user that no optics are included as per previous bullet, but allow cards to be ordered without any
(#ALBP) 12 Gb SAS 4 Port Adapter Cards (Pair)

This feature provides two I/O adapter cards. It is used to add 12 Gb SAS connectivity to the control enclosure. Refer to the Technical Description - Host Interface Cables section for cable requirements.

  • For 4662-6H2: (#ALBP)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • When this feature is selected, an additional host interface card feature (ALB3-ALBQ) can be selected for a maximum of 2 total host interface cards.
      • Not compatible with features ALB3, ALB5, ALBJ, ALBK.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
  • For 4662-UH6: (#ALBP)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • When this feature is selected, an additional host interface card feature (ALB3-ALBQ) can be selected for a maximum of 2 total host interface cards.
      • Not compatible with features ALB3, ALB5, ALBJ, ALBK.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
(#ALBQ) SAS Expansion Enclosure Attach Card (Pair)

This feature provides two four port 12 Gb SAS expansion enclosure attachment card. This feature is used to attach up to twenty expansion enclosures to the control enclosure.Refer to the Technical Description section for adapter configuration rules and cable requirements.

  • For 4662-6H2: (#ALBQ)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • When this feature is selected, an additional host interface card feature (ALB3-ALBQ) can be selected for a maximum of 2 total host interface cards.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
  • For 4662-UH6: (#ALBQ)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • When this feature is selected, an additional host interface card feature (ALB3-ALBQ) can be selected for a maximum of 2 total host interface cards.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
(#ALE0) Encryption Enablement

This feature enables the encryption function. A single instance of this feature enables the function on the entire system (control enclosure and all attached expansion enclosures) and on externally virtualized storage subsystems. USB flash drives are required for storing the encryption master access key. See feature ACEA for additional details.
Note: This feature is not available in Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia.

  • For 4662-6H2: (#ALE0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • If feature ELG2 is present on the order, only allow this feature to be configured as an MES.
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
      • e-config: For Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia, do not model, display, or allow user selection of this feature.
  • For 4662-UH6: (#ALE0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.
      • e-config: For Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia, do not model, display, or allow user selection of this feature.
(#ALEC) Encryption USB Flash Drives (Four Pack)

This feature provides four USB flash drives for storing the encryption master access key. Unless IBM Security Key Manager (SKLM) is used for encryption keys management, a total three USB flash drives are required per FlashSystem 5200 cluster when encryption is enabled in the cluster, regardless of the number of systems in the cluster. If encryption will be used in a cluster, this feature should be ordered on one FlashSystem 5200 system, resulting in a shipment of four USB flash drives.
Note: This feature is not available in the following countries: Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia.

  • For 4662-6H2: (#ALEC)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.e-config: For Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia, do not model, display, or allow user selection of this feature.
  • For 4662-UH6: (#ALEC)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Not compatible with feature ADN2 on the initial machine order.
      • When feature 5555 or ADNR is present on the order, maximum allowed is 255 per feature.e-config: For Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia, do not model, display, or allow user selection of this feature.
(#ALG0) 64 GB Base Cache

This feature indicates the base machine will be configured with 64GB (2x 32GB DIMMs)(32 GB for each node canister).
Note: 256GB Cache is required for Data Deduplication.

  • For 4662-6H2: (#ALG0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Selection of feature ALG0 or ALG1 is mandatory on initial order
      • Not compatible with feature ALG1
  • For 4662-UH6: (#ALG0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Selection of feature ALG0 or ALG1 is mandatory on initial order
      • Not compatible with feature ALG1
(#ALG1) 512 GB Base Cache

This feature indicates the base machine will be configured with 512GB (8x 64GB DIMMs)(256 GB for each node canister).
Note: 256GB Cache is required for Data Deduplication.

  • For 4662-6H2: (#ALG1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Selection of feature ALG0 or ALG1 is mandatory on initial order
      • Not compatible with feature ALG0, ALGC, ALGD.
  • For 4662-UH6: (#ALG1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • Selection of feature ALG0 or ALG1 is mandatory on initial order
      • Not compatible with feature ALG0, ALGC, ALGD.
(#ALGC) 192 GB Cache Upgrade

This feature provides an additional 192 GB (6x 32GB DIMMs)of cache (96 GB for each node canister) to increase the total system cache by 192 GB.
Note: 256GB Cache is required for Data Deduplication.

  • For 4662-6H2: (#ALGC)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Requires feature ALG0
      • Not compatible with feature ALG1
      • e-config: Preselect qty 1
  • For 4662-UH6: (#ALGC)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • Requires feature ALG0
      • Not compatible with feature ALG1
      • e-config: Preselect qty 1
(#ALGD) 512 GB Cache Upgrade

This feature provides 512 GB (8x 64GB DIMMs) of cache (256 GB for each node canister) to replace the existing 32GB DIMMs and bring the total system cache to 512 GB.
Note: 256GB Cache is required for Data Deduplication.

  • For 4662-6H2: (#ALGD)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • Requires feature ALG0
      • Not compatible with feature ALG1
  • For 4662-UH6: (#ALGD)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • Requires feature ALG0
      • Not compatible with feature ALG1
(#ALH0) IBM Storage Expert Care Indicator

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALH0)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • e-config: this feature is automatically assigned when a Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALH0)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • e-config: this feature is automatically assigned when a Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALH0)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • e-config: this feature is automatically assigned when a Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALH0)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • e-config: this feature is automatically assigned when a Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALH0)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments:
      • e-config: this feature is automatically assigned when a Expert Care Service & Support MTM selected.
(#ALJ1) IBM Storage Expert Care Basic 1 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALJ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALJ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALJ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALJ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALJ1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALJ2) IBM Storage Expert Care Basic 2 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALJ2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALJ2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALJ2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALJ2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALJ2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALJ3) IBM Storage Expert Care Basic 3 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALJ3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALJ3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALJ3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALJ3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALJ3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALJ4) IBM Storage Expert Care Basic 4 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALJ4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALJ4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALJ4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALJ4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALJ4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALJ5) IBM Storage Expert Care Basic 5 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALJ5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALJ5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALJ5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALJ5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALJ5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALK1) IBM Storage Expert Care Advanced 1 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALK1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALK1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALK1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALK1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALK1)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALK2) IBM Storage Expert Care Advanced 2 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALK2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALK2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALK2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALK2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALK2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALK3) IBM Storage Expert Care Advanced 3 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALK3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALK3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALK3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALK3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALK3)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALK4) IBM Storage Expert Care Advanced 4 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALK4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALK4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALK4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALK4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALK4)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALK5) IBM Storage Expert Care Advanced 5 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • For 4662-12G: (#ALK5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-24G: (#ALK5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-6H2: (#ALK5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-92G: (#ALK5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
  • For 4662-UH6: (#ALK5)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#ALC7 - #ALKZ) Expert Care Advanced features
  • (#ALC7) Expert Care Advanced 1 hour Committed Contact 4 Year
  • (#ALC8) Expert Care Advanced 4 hour Committed On-Site 4 Year
  • (#ALC9) Expert Care Advanced 4 hour Committed Fix 4 Year
  • (#ALCA) Expert Care Advanced 6 hour Committed Fix 4 Year
  • (#ALCB) Expert Care Advanced 8 hour Committed Fix 4 Year
  • (#ALCC) Expert Care Advanced 12 hour Committed Fix 4 Year
  • (#ALCD) Expert Care Advanced 24 hour Committed Fix 4 Year
  • (#ALCE) Expert Care Advanced 48 hour Committed Fix 4 Year
  • (#ALCF) Expert Care Advanced 72 hour Committed Fix 4 Year
  • (#ALCG) Expert Care Advanced 1 hour Committed Contact 5 Year
  • (#ALCH) Expert Care Advanced 4 hour Committed On-Site 5 Year
  • (#ALCJ) Expert Care Advanced 4 hour Committed Fix 5 Year
  • (#ALCK) Expert Care Advanced 6 hour Committed Fix 5 Year
  • (#ALCL) Expert Care Advanced 8 hour Committed Fix 5 Year
  • (#ALCM) Expert Care Advanced 12 hour Committed Fix 5 Year
  • (#ALCN) Expert Care Advanced 24 hour Committed Fix 5 Year
  • (#ALCP) Expert Care Advanced 48 hour Committed Fix 5 Year
  • (#ALCQ) Expert Care Advanced 72 hour Committed Fix 5 Year
  • (#ALK7) Expert Care Advanced 1 hour Committed Contact 1 Year
  • (#ALK8) Expert Care Advanced 4 hour Committed On-Site 1 Year
  • (#ALK9) Expert Care Advanced 4 hour Committed Fix 1 Year
  • (#ALKA) Expert Care Advanced 6 hour Committed Fix 1 Year
  • (#ALKB) Expert Care Advanced 8 hour Committed Fix 1 Year
  • (#ALKC) Expert Care Advanced 12 hour Committed Fix 1 Year
  • (#ALKD) Expert Care Advanced 24 hour Committed Fix 1 Year
  • (#ALKE) Expert Care Advanced 48 hour Committed Fix 1 Year
  • (#ALKF) Expert Care Advanced 72 hour Committed Fix 1 Year
  • (#ALKG) Expert Care Advanced 1 hour Committed Contact 2 Year
  • (#ALKH) Expert Care Advanced 4 hour Committed On-Site 2 Year
  • (#ALKJ) Expert Care Advanced 4 hour Committed Fix 2 Year
  • (#ALKK) Expert Care Advanced 6 hour Committed Fix 2 Year
  • (#ALKL) Expert Care Advanced 8 hour Committed Fix 2 Year
  • (#ALKM) Expert Care Advanced 12 hour Committed Fix 2 Year
  • (#ALKN) Expert Care Advanced 24 hour Committed Fix 2 Year
  • (#ALKP) Expert Care Advanced 48 hour Committed Fix 2 Year
  • (#ALKQ) Expert Care Advanced 72 hour Committed Fix 2 Year
  • (#ALKR) Expert Care Advanced 1 hour Committed Contact 3 Year
  • (#ALKS) Expert Care Advanced 4 hour Committed On-Site 3 Year
  • (#ALKT) Expert Care Advanced 4 hour Committed Fix 3 Year
  • (#ALKU) Expert Care Advanced 6 hour Committed Fix 3 Year
  • (#ALKV) Expert Care Advanced 8 hour Committed Fix 3 Year
  • (#ALKW) Expert Care Advanced 12 hour Committed Fix 3 Year
  • (#ALKX) Expert Care Advanced 24 hour Committed Fix 3 Year
  • (#ALKY) Expert Care Advanced 48 hour Committed Fix 3 Year
  • (#ALKZ) Expert Care Advanced 72 hour Committed Fix 3 Year

This feature indicates a priced Expert Care Service and Support offering (machine type 466x) is included on the order. It is for administrative purposes only.

  • Minimum required: 0
  • Maximum allowed: 1 (Initial order maximum: 1)
  • Customer setup: Yes
  • Plant / Field installable: Initial
  • Comments:
    • e-config: This feature is automatically assigned depending on the Expert Care Service & Support MTM selected.
(#AQQQ) No Ship MES

This feature indicates an MES order comprised of administrative features. It is used to indicate the order will not require shipment of any physical parts and will not require SSR installation.

  • For 4662-UH6: (#AQQQ)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: MES
    • Comments:
      • Not compatible with any feature shipping a physical part.
      • A variable usage indicator (features AE00, AE01, AE02) feature is a corequisite.
      • e-config: Automatically add this feature to the order when feature AE00, AE01, or AE02 is added to the order. Do Not display selection.
(#B0NQ) ServicePac for Hard Drive or Media Retention for Storage 3 years

This feature indicates a priced ServicePac (machine type 666x) is included on the order. It is for administrative purposes only.

  • Minimum required: None.
  • Maximum allowed: One.
  • Comments:
    • Feature ALJ3 or ALK3 as a pre-requisite for MTM 4662-6H2, 4662-UH6, 4662-12G, 4662-24G, and 4662-92G
    • This feature is available in only select countries. Contact IBM Global Services for additional information.
  • Plant install / field install: Both.
(#B0PF) ServicePac for Hard Drive or Media Retention for Storage 5 years

This feature indicates a priced ServicePac (machine type 666x) is included on the order. It is for administrative purposes only.

  • Minimum required: None.
  • Maximum allowed: One.
  • Comments:
    • Feature ALJ5 or ALK5 as a pre-requisite for MTM 4662-6H2, 4662-UH6, 4662-12G, 4662-24G and 4662-92G
    • This feature is available in only select countries. Contact IBM Global Services for additional information.
  • Plant install / field install: Initial.
(#B0SK) ServicePac Machine Setup Support for Storage

This feature indicates a priced ServicePac (machine type 666x) is included on the order. It is for administrative purposes only.

  • Minimum required: None.
  • Maximum allowed: One.
  • Comments:
  • This feature is available in only select countries. Contact IBM Global Services for additional information.
  • Plant install / field install: Both.
(#ECSM) CSC ORDER ROUTING INDICATOR - GUADALAJARA

This feature indicates the machine will have Guadalajara Customer Solution Center (CSC) activity performed prior shipment. This feature should only be selected when instructed to do so by the CSC. It is for administrative purposes only.

  • For 4662-12G: (#ECSM)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: -- Not compatible with feature ADN2 on the initial machine order.-- Not compatible with feature EFD0.-- e-config: Testing of the 255 maximum allowed is not required.
  • For 4662-24G: (#ECSM)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: -- Not compatible with feature ADN2 on the initial machine order.-- Not compatible with feature EFD0.-- e-config: Testing of the 255 maximum allowed is not required.
  • For 4662-6H2: (#ECSM)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: -- Not compatible with feature ADN2 on the initial machine order.-- Not compatible with feature EFD0.-- e-config: Testing of the 255 maximum allowed is not required.
  • For 4662-92G: (#ECSM)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: -- Not compatible with feature ADN2 on the initial machine order.-- Not compatible with feature EFD0.-- e-config: Testing of the 255 maximum allowed is not required.
  • For 4662-UH6: (#ECSM)
    • Minimum required: 0
    • Maximum allowed: 255 (Initial order maximum: 255)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: -- Not compatible with feature ADN2 on the initial machine order.-- Not compatible with feature EFD0.-- e-config: Testing of the 255 maximum allowed is not required.
(#EFD0) Route to Power Manufacturing Indicator

This feature indicates ordering routing for manufacturing purposes. It is for administrative purposes only.

  • For 4662-12G: (#EFD0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: -- Not compatible with feature ADN2.-- Do not display in e-config.
  • For 4662-24G: (#EFD0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: -- Not compatible with feature ADN2.-- Do not display in e-config.
  • For 4662-6H2: (#EFD0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: -- Not compatible with feature ADN2.-- Do not display in e-config.
  • For 4662-92G: (#EFD0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: -- Not compatible with feature ADN2.-- Do not display in e-config.
  • For 4662-UH6: (#EFD0)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments: -- Not compatible with feature ADN2.-- Do not display in e-config.
(#ELG2) IBM Power Private Cloud Rack Solution Indicator

This feature is used for administrative purposes only.

  • For 4662-6H2: (#ELG2)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • Customer setup: Yes
    • Plant / Field installable: Initial
    • Comments:
      • e-config: Do not model or allow selection of this feature.
(#ELG4) IBM Power Private Cloud Rack for OracleDB Solution Indicator

IBM Power Private Cloud Rack for OracleDB Solution Indicator

  • Minimum required: 0
  • Maximum allowed: 1 (Initial order maximum: 1)
  • Customer setup: No
  • Plant / Field installable: Initial
  • Comments: None.
(#SVBP) BP Post-Sale Services

BP Post-Sale Services

  • For 4662-12G: (#SVBP)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-24G: (#SVBP)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-6H2: (#SVBP)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-92G: (#SVBP)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-UH6: (#SVBP)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
(#SVCS) IBM Systems Lab Services Post-Sale Services

IBM Systems Lab Services Post-Sale Services

  • For 4662-12G: (#SVCS)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-24G: (#SVCS)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-6H2: (#SVCS)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-92G: (#SVCS)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-UH6: (#SVCS)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
(#SVNN) Other IBM Post-Sale Services

Other IBM Post-Sale Services

  • For 4662-12G: (#SVNN)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-24G: (#SVNN)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-6H2: (#SVNN)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-92G: (#SVNN)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.
  • For 4662-UH6: (#SVNN)
    • Minimum required: 0
    • Maximum allowed: 250 (Initial order maximum: 250)
    • Customer setup: Yes
    • Plant / Field installable: Both
    • Comments: None.


Back to topBack to top

Accessories

Top rule

None.

Customer replacement parts

None.



Back to topBack to top

Supplies

Top rule

None.

Supplemental media

None.



Back to topBack to top

Trademarks

Top rule

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this Sales Manual at any time without notice. This Sales Manual is provided for your information only. Additional terms of use are located at

Terms of use


© IBM Corporation 2022.