7043-270 IBM RS/6000 7043 Model 270
IBM Japan Sales ManualRevised: September 8, 2020
| Table of contents | ||||||||||||||||||||
|
Product life cycle dates
| Type Model | Announced | Available | Marketing Withdrawn | Service Discontinued |
|---|---|---|---|---|
| 7043-270 | 2000-02-07 | 2000-02-25 | 2003-09-12 | 2009-12-31 |
Back to top
Abstract
IBM UNIX systems consist of the IBM eServer pSeries and IBM RS/6000 product lines. Providing unprecedented value, these innovative systems feature IBM's leading-edge technology and run the top-rated UNIX operating system, AIX. This broad product line ranges from powerful workstations ideal for mechanical design; to mission-critical symmetric multiprocessing (SMP) servers for ERP, SCM, CRM, transaction processing, and Web serving; up to parallel RS/6000 SP systems that can handle demanding scientific and technical computing and business intelligence tasks. These platforms provide the power to create change and the flexibility to manage it, with thousands of applications that provide real value. More than 1,000,000 systems have shipped to over 135,000 businesses worldwide.
Model abstract 7043-270
The 7043 Model 270 is a powerful graphics workstation or server. To simplify ordering and reduce the number of feature codes, the 7043 Model 270 is structured without the traditional "base" and "select" features that were used in the past. All processors, memory, disk drives, and other features must be explicitly ordered.
The AIX 4.3.3 operating system is required.
Note: Additional memory can also be added in pairs of 32 MB, 128 MB,
and/or 256 MB DIMMs to a maximum addressable memory of 8 GB.
The system does not come standard with a keyboard, mouse, or graphics adapter. AIX Version 4 and later does not require a keyboard, mouse, or graphics adapter to operate on the system.
Back to top
Highlights
See Model Highlights.
Model highlights 7043-270
The 7043 Model 270 provides an excellent price/performance solution in the mid-range graphics workstation and entry server families. It offers:
- 64-bit symmetric multiprocessing (SMP) capability
- Excellent floating-point performance
- MCAD design and analysis capability in a single system
- Performance and expandability for use as an entry server
Back to top
Description
An installed 7043 Model 260 system can be upgraded to a Model 270. When you upgrade:
- A new chassis is shipped from the factory, built with the new options specified in your upgrade order.
- Some internal components from your Model 260 must be transferred to
the new upgrade chassis:
- Memory cards
- All memory DIMMs
- Supported disk drives
- CD-ROM drive and media
- Most PCI adapter cards
- The upgrade chassis will be built with the same serial number as the original Model 260 system.
- The upgrade chassis will include any of the optional features available on a new Model 270 system.
Parts not used in the upgrade become the property of IBM and must be returned to IBM. Optional features of the Model 260 will be installed in the Model 270 upgrade system or returned to you. Refer to the Feature Availability Matrix in the Sales Manual for a listing of supported and non-supported features.
At the time of the system hardware upgrade, the operating system software must also be upgraded to AIX Version 4.3.3, or later.
Helps To Protect Your Investment
The 7043 Model 270 is designed to grow with your requirements by supporting "Under-the-Covers" scalability and expandability by providing the ability to add the following without any modification to the power supply provided with the server:
- Media devices
- System hardfiles
- 1-or 2-Way SMP processor cards
- Dual Inline Memory Modules (DIMMs)
- Up to a maximum of two memory cards (16 DIMMs per card)
- I/O Adapters (PCI)
Shipment Group:
The RS/6000 Model 270 is shipped with:
- Language group, which includes system publications (the appropriate specify code must be in order)
- Power Cord
- Diagnostics
Back to top
Models
Model summary matrix
Optical
Model Hard Slot Storage
Number Processor Speed Memory Drive Maximum Device
-------- --------- ------- ------ ----- -------- --------
7043-270 1-,2-,3-, 375 MHz 256 MB 4.5 GB 5 PCI A CD-ROM
or 4-way, to to readable
64-bit 8 GB 18.2 GB device
Customer setup (CSU)
None.
Devices supported
The following external machine types are supported on the indicated models for MT 7043.
This list is not all inclusive. Many devices are supported through standard ports. Please refer to the sales manual of the external machine type and the list of supported devices in the appropriate section of the AIX sales manual for further attach support information.
The Microsoft Natural Keyboard Elite (English) is supported on the RS/6000 43P 7043 Model 270.
|2| X = SUPPORTED DEVICE
|7|
|0|
MT-MOD | | DESCRIPTION
---------|-|-----------------------------------------
---------+-+--------DISK-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2104-DL1 |X| Expandable Storage Plus
2104-TL1 |X| Expandable Storage Plus
2105-E10 |X| Enterprise Storage Server
2105-E20 |X| Enterprise Storage Server
7131-105 |X| Multi-Storage Tower
7131-405 |X| SSA Multi-Storage Tower
7133-010 |X| SSA Disk Subsystem (Rack-Mounted)
7133-020 |X| SSA Disk Subsystem (Rack-Mounted)
7133-500 |X| SSA Disk Subsystem
7133-600 |X| SSA Disk Subsystem
7133-D40 |X| IBM Serial Disk System Advanced Model D40
7133-T40 |X| IBM Serial Disk System Advanced Model T40
7137-412 |X| Disk Array Subsystem (1.97 - 6.91 GB)
7137-413 |X| Disk Array Subsystem (3.94 - 13.77 GB)
7137-414 |X| Disk Array Subsystem (8.39 - 29.36 GB)
7137-415 |X| Disk Array Subsystem (17.7 - 70.83 GB)
7203-001 |X| Portable Disk Drive
7204-010 |X| 1 GB Disk Drive
7204-112 |X| 1.1 GB Fast/Wide Disk Drive
7204-113 |X| 2.2 GB Fast/Wide Disk Drive
7204-114 |X| 4.5 GB Fast/Wide Disk Drive
7204-118 |X| IBM 7204-118 18GB SE External Disk Drive
7204-139 |X| 9.1 GB Fast/Wide Disk Drive
7204-215 |X| 2 GB Differential Disk Drive
7204-315 |X| 2 GB Differential Fast/Wide Disk Drive
7204-317 |X| 2.2 GB Differential Fast/Wide Disk Drive
7204-325 |X| 4.5 GB Differential Fast/Wide Disk Drive
7204-339 |X| 7204 Model 339 9.1 GB External Disk Drive
7204-402 |X| 7204 Model 402 External 2.2 GB Disk Drive
7204-404 |X| 7204 Model 404 External 4.5 GB Disk Drive
7204-409 |X| 7204 External Disk Drive Models 409
7204-418 |X| IBM 7204-418 18GB DE External Disk Drive
7204-419 |X| 7204 External Disk Drive Models 419
7204-518 |X| IBM 7204 Model 518 18.3 GB External Disk Drive
7204-536 |X| IBM 7204 Model 536 36.7 GB External Disk Drive
| |
---------+-+--------GRAPHICS RELATED-----------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
6093-011 |X| CursorPad Tablet
6093-012 |X| Large Tablet
6093-021 |X| IBM Tablet Model 021
6094-010 |X| Dials
6094-020 |X| LPF Keyboard
6094-030 |X| Spaceball
6094-031 |X| Spaceball
6094-040 |X| Spaceball
6094-600 |X| Magellan Enhanced Input Device
| |
---------+-+--------DISPLAYS-------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
6546-00E |X| G52 Display
6546-00N |X| G52 Display
6546-01E |X| G52 Display
6546-01S |X| G52 Display
6546-0AE |X| G54 Display
6546-0AN |X| G54 Display
6546-0BE |X| G54 Display
6546-0BN |X| G54 Display
6546-0BS |X| G54 Display
6546-21N |X| G52 Display
6546-2BN |X| G54 Display
6546-31N |X| G52 Display
6546-4AN |X| G54 Display
6546-6BN |X| G54 Display
6555-763 |X| P70 17" COLOR DISPLAY
6555-764 |X| P70 17" COLOR DISPLAY
6555-773 |X| P200 UV-N COLOR MONITOR
6555-774 |X| P200 UV-N COLOR MONITOR
6555-803 |X| P201 UV-N COLOR MONITOR
9513-AG2 |X| IBM T55A 15" TFT LCD COLOR MONITO
9513-AW1 |X| IBM T55A 15" TFT LCD COLOR MONITOR
9516-B03 |X| 16.1" TFT LCD DISPLAY
9516-B04 |X| 16.1" TFT LCD DISPLAY
9519-AG1 |X| T85A 18"(18.1" Viewable) LCD Color Analog Monitor -Black
9519-AW1 |X| T85A 18"(18.1" Viewable) LCD Color Analog Monitor -White
| |
---------+-+--------SCSI DEVICES---------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3995-C60 |X| Optical Library Dataserver (1 Drive)
3995-C62 |X| Optical Library Dataserver (2 Drives)
3995-C64 |X| Optical Library Dataserver (2 Drives)
3995-C66 |X| Optical Library Dataserver (4 Drives)
3995-C68 |X| Optical Library Dataserver (4 Drives)
7209-002 |X| Optical Disk Drive
7209-003 |X| Optical Disk Drive
7210-005 |X| CD-ROM Drive
7210-010 |X| CD-ROM Drive (Quad speed)
7210-015 |X| CD-ROM Drive
7210-020 |X| IBM 7210 External CD-ROM Drive Model 020
7210-025 |X| IBM 7210 DVD-RAM Drive Model 025
| |
---------+-+--------TAPE-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3490-F00 |X| 3490 Model F00 IBM Magnetic Tape Subsystem
3490-F01 |X| 3490 Model F01 IBM Magnetic Tape Subsystem
3494-B18 |X| 3494 Model B18 Virtual Tape Server
3494-B10 |X| IBM TotalStorage Virtual Tape Server
3494-B20 |X| IBM TotalStorage Virtual Tape Server
3494-L12 |X| IBM TotalStorage Enterprise Automated Tape Library
3570-B00 |X| IBM Magstar MP 3570 Model B00 Tape Subsystem
3570-B01 |X| IBM Magstar MP 3570 Model B01 Tape Subsystem (Floor
| | Library, 1 Drive)
3570-B02 |X| Tape Subsystem (2 Drives)
3570-B11 |X| IBM Magstar MP 3570 Model B11 Tape Subsystem (Rack
| | Mounted, 1 Drive)
3570-B12 |X| IBM Magstar MP 3570 Model B12 Tape Subsystem (Rack
| | Mounted, 2 Drives)
3570-B1A |X| IBM Magstar MP Tape Drive Model B1A
3570-C00 |X| Magstar Magnetic Tape Subs * 1 Tape Lib (1), SCSI
3570-C01 |X| Magstar Magnetic Tape Subs * 1 Tape Lib (20), SCSI
3570-C02 |X| Magstar Magnetic Tape Subs * 2 Tape Lib (20), SCSI
3570-C11 |X| Magstar Magnetic Tape Subs * 1 Tape Lib (20), SCSI
3570-C12 |X| Magstar Magnetic Tape Subs * 2 Tape Lib (20), SCSI
3575-L06 |X| IBM MAGSTAR MP Tape Library DataServer - 60 CARTRIDGE
3575-L12 |X| IBM MAGSTAR MP Tape Library DataServer - 120 CARTRIDGE
3575-L18 |X| IBM Magstar MP Tape Library Dataserver Model L18
3575-L24 |X| IBM MAGSTAR MP Tape Library DataServer - 240 CARTRIDGE
3575-L32 |X| IBM MAGSTAR MP Tape Library DataServer - 320 CARTRIDGE
3580-H23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3580-L23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3581-H23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3581-L23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3584-D22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D22 Expansion Frame
3584-D52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D52 Expansion Frame
3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1
3584-L22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L22 Base Frame
3584-L52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L52 Base Frame
3590-B11 |X| High Performance Tape Subsystem
3590-B1A |X| High Performance Tape Subsystem
3590-C12 |X| Magstar Tape Subsystem Frame * Silo Comp Frame, att 4 3590
| | drives
3590-E11 |X| IBM Magstar Tape Subsystem
3590-E1A |X| IBM Magstar Tape Subsystem
3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11
3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A
7205-311 |X| DLT Tape Drive Bridge Box
7205-440 |X| 40 GB External Digital Linear Tape Drive
7206-005 |X| 4 GB 4mm Tape Drive
7206-220 |X| External 20 GB 4mm DDS-4 Tape Drive
7206-110 |X| Cartridge Autoloader * 4mm, DDS-3, SCSI-2, DAT
7206-VX2 |X| IBM 7206 Model VX2 External Tape Drive
7207-011 |X| 525 MB 1/4" Tape Drive
7207-012 |X| 1.2 GB 1/4" Tape Drive
7207-122 |X| 4GB External SLR5 QIC tape drive
7207-315 |X| 13 GB 1/4" Tape Drive
7208-011 |X| 5 GB 8mm Tape Drive
7208-341 |X| 7208 Model 341 20GB External 8mm Tape Drive
7208-345 |X| 7208 Model 345 60GB External 8mm Tape Drive
7331-205 |X| 8mm Tape Library
7331-305 |X| 7331 Model 305 8mm Tape Library
7332-005 |X| 4mm DDS-2 Tape Autoloader
7332-110 |X| Cartridge Autoloader * 4mm, DDS-3, SCSI-2, DAT
7332-220 |X| 4mm DDS-4 Tape Cartridge Autoloader
7334-410 |X| 8mm Tape Library
7336-205 |X| 4mm Tape Library
7337-305 |X| 7337 Model 305 Digital Linear Tape Subsystem
7337-306 |X| 7337 Model 306 Digital Linear Tape Subsystem
7337-360 |X| 7337 Digital Linear Tape Library
9348-012 |X| 1/2" 9-Track Magnetic Tape Unit
Model conversions
RS/6000 7043 Model 260 to Model 270.
(No Longer Available as of September 12, 2003)
An installed 7043 Model 260 system can be upgraded to a 7043 Model 270. This upgrade consists of a new chassis, shipped from the factory and built with the new options specified in the upgrade order. At the customer location, some internal components will be transferred to the new upgrade chassis. Features that will move to new chassis include memory cards, all memory DIMMs, disk drives, optical storage devices and media, and most PCI adapter cards. The upgrade chassis will be built with the same serial number as the original 260 system.
When placing an upgrade order, the customer can include any of the optional features that are available on a new 270 system. Parts not used in the upgrade become the property of IBM and must be returned to IBM. Optional features of the 260 will be installed in the 270 upgrade system or returned to the customer. Refer to the Feature Availability Matrix for a listing of supported and non-supported features.
At the time of the system hardware upgrade, the operating system software must also be upgraded to AIX 4.3.3, or later.
Back to top
Technical description
 |
Physical specifications | |
Hardware requirements |
|
Operating environment | |
Software requirements |
|
Limitations | ||
Physical specifications
With Pedestal Without Pedestal
---------------- ----------------
Width: 340 mm (13.4 in) 222 mm ( 8.7 in)
Depth: 713 mm (28.1 in) 713 mm (28.1 in)
Height: 610 mm (24.0 in) 600 mm (23.6 in)
Weight: 37.0 kg (81 lb) - Minimum Configuration
45.0 kg (99 lb) - Maximum Configuration
Operating environment
- Temperature: 16 to 32C (60 to 90F)
- Relative Humidity: 8 to 80 %
- Maximum Wet Bulb: 23C
- Operating Voltage: 100 to 127 volts AC; 200 to 240 volts AC @ 48/62 Hz
- Electrical Output: 297 watts (typical); 445 watts (maximum)
- Thermal Output: 1,012 Btu/hour (typical); 1,518 Btu/hour (maximum)
- Power Source Loading
- 0.3 kVA (typical configuration)
- 0.47 kVA (maximum configuration)
Noise Level and Sound Power
- Sound Power: 5.4 Bels Idle/5.5 Bels Operating. Meets quiet office standard for deskside systems.
EMC Conformance Classification
This equipment is subject to FCC rules and it shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.
- U.S.A.: FCC Class B
- Europe: CISPR 22 Class B
- Japan: VCCI-2
- Korea: Korean Requirement Class B
Homologation 3-- Telecom Environmental Testing (Safety and EMC)
Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude. This IBM RS/6000 model and applicable features meet the environmental testing requirements of the country TELECOM and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom Regulatory authority.
Product Safety/Country Testing/Certification
- UL 1950 Underwriters Laboratory, Safety Information
- CSA C22.2 No. 950-M86
- EN60950 European Norm
- IEC 950, Edition 1, International Electrotechnical Commission, Safety Information
- Nordic deviations to IEC-950 1st Edition, as outlined in document EMKO-TSE(05-SEC) 200/93
General Requirements
The product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).
Limitations
System Memory
- A maximum of 8 GB of system memory.
- A minimum of 256 MB of memory is required.
- One or two memory cards may be installed.
- The first memory card must be installed in memory card slot 2.
- Memory DIMMs must be ordered and installed in pairs on the memory cards. They must be installed starting at the bottom of each card (card slot J1 and J2) and then moving up. Reference Figure 1.
- All slots in the first memory card must be filled before a second memory card is installed.
Feature code #4121 will be unavailable on the 7043 Model 270 until 04/01/01.
Figure 1. 7043-270 Memory Card
___________________________________________________________
- _________________ ________________ -
- -_________________- J15 J16-________________- -
- _________________ ________________ -
- -_________________- J13 J14-________________- -
- _________________ ________________ -
- -_________________- J11 J12-________________- -
- _________________ ________________ -
- -_________________- J9 J10-________________- -
- _________________ ________________ -
- -_________________- J7 J8 -________________- -
- _________________ ________________ -
- -_________________- J5 J6 -________________- -
- _________________ ________________ -
- -_________________- J3 J4 -________________- -
- _________________ ________________ -
- -_________________- J1 J2 -________________- -
-______________ ______________-
-______________________________-
Memory Features
Feature
Feature Number Minimum Maximum
======= ====== ======= =======
Memory Card 4098 1 2
64 MB 4107 0 8/card
(2 x 32 MB DIMMs)
256 MB 4110 0 8/card
(2 x 128 MB DIMMs)
512 MB 4119 0 8/card
(2 x 256 MB DIMMs)
512 MB 4120 0 8/card
(2 x 256 MB DIMMS)
PCI Card Slots: There are five PCI slots in the Model 270 (reference Figure 2):
- Slots 1 and 2 are 64-bit and run at 50 MHz.
- Slots 3, 4, and 5 are 32-bit and run at 33 MHz.
- All slots are long slots.
Figure 2. 7043-270 Processor, Memory, and Adapter Slot Locations
______________________________________
| __________________ ________________|___
|| | | Bay 2: Optical | |
|| Power Supply | | Storage Device| |
|| | |________________|___|
|| | ________________|___
|| | | Bay 3: Media | |
|| | | or Disk | |
||__________________| |________________|___|
| _ _ _ _ _ _ _ _ _ _ | _
| | Hard Disk 1 ||| |
| |_ _ _ _ _ _ _ _ _ _|||_ |
| _ _ _ _ _ _ _ _ _ _ | _
| | Hard Disk 2 ||| |
| |_ _ _ _ _ _ _ _ _ _||| _|
| _______________________________ __|___
CPU card slot 1 -- | |_______________________________||Operator
| _______________________________ |Panel |
CPU card slot 2 -- | |_______________________________||__|___|
| _______________________________ |
Memory card slot 1 -- | |_______________________________| |
| _______________________________ |
Memory card slot 2 -- | |_______________________________| |
| _______________________________ |
PCI slot 5 -- ||_______________________________| |
| _______________________________ |
PCI slot 4 -- ||_______________________________| |
| _______________________________ |
PCI slot 3 -- ||_______________________________| |
| _______________________________ |
PCI slot 2 -- ||_______________________________| |
| _______________________________ |
||_______________________________| |
| _______________________________ |
PCI slot 1 -- ||_______________________________| |
|______________________________________|
Graphics Adapters
- Graphics adapter, keyboard, and mouse are not required in the minimum configuration.
- Extra space is provided between slots 1 and 2 to allow for additional cooling for graphics adapters in slot 2.
- If GXT3000P is installed in slot 4, slot 3 will be unavailable.
- The maximum number of graphics adapters supported in the 7043-270 is four total (any combination).
- Refer to the table below for additional graphics adapter limitations.
Graphics Adapters
Feature
Priority Adapter Number Max Slot Priority Size
======== ======== ====== === ============= ====
1 GXT3000P 2825 2 2,4 Long
3 GXT2000P 2823 4 1,2,3,4,5 Short
4 GXT300P 2841 4 1,2,3,4,5 Short
4a GXT250P 2851 4 1,2,3,4,5 Short
4b GXT255P 2852 4 1,2,3,4,5 Short
5 GXT130P 2830 3 5,4,3 Short
5a GXT120P 2838 4 1,2,3,4,5 Short
I/O Adapters
- The PCI SSA Multi-Initiator/RAID EL Adapter (#6215) can be selected with or without the cache upgrade (#6222).
- The SSA Fast Write Cache (#6222) is a cache upgrade for the PCI SSA Multi-Initiator/RAID EL Adapter and can only be selected along with feature number 6215 (maximum - 1 per #6215).
- The SSA/RAID adapter (#6225) can be selected with or without the fast write cache option (#6235).
- The fast write cache option (#6235) is a cache upgrade for the SSA/RAID adapter (#6225) and can only be selected along with that adapter.
- The maximum number of ARTIC960Hx RxD (#6310) and ARTIC960RxF PCI (#6311) adapters installed in the system cannot exceed a combined total of 4.
- The video capture adapter (#2639) and the Ultra SCSI RAID adapter (#2494) cannot be installed in the system at the same time.
I/O Adapter Features
Feature Slot
Priority I/O Adapter Number Max Priority Size
======== =========== ====== === ========== ====
2 Gigabit Ethernet 2969 5 1,2,3,4,5 Short
6 ISDN 2708 1 5,4,3 Short
6A 4-Port 10/100 4951 3 5,4,3 Long
Ethernet
7 Ultra2 SCSI RAID 2494 2 5,4,3 Long
8 Ultimedia Video 2639 1 5,4,3 Short
Capture
9 2-Port 2962 2 5,4,3 Short
Multiprotocol
10 Ultra SCSI SE 6206 3 5,4,3 Short
11 Ultra2 SCSI 6205 2 1,2,3,4,5 Long
12 ARTIC960Hx RxD 6310 3 5,4,3,2,1 Long
12A ARTIC960xF PCI 6311 3 5,4,3,2,1 Long
14 SSA RAID5 6230 2 5,4,3,2,1 Long
14A SSA RAID5 6215 1 5,4,3 Short
None Fast Write Cache 6222 1 None - -
for #6215
N/A DIMM for #6230 6231 2 N/A N/A
N/A Cache for #6230 6235 2 N/A N/A
for #6225, #6230
15 ARTIC960Hx 4-Port 2947 2 5,4,3,2,1 Long
15A ARTIC960HX 4-PORT 2948 2 5,4,3,2,1 Long
T1/E1
16 8-Port Async 2943 2 5,4,3,2,1 Short
17 128-Port Async 2944 2 5,4,3,2,1 Short
18 155 UTP ATM 2963 5 5,4,3,2,1 Short
19 155 MMF ATM 2988 5 5,4,3,2,1 Short
20 FDDI (Dual) 2742 5 5,4,3,2,1 Short
21 FDDI (Single) 2741 5 5,4,3,2,1 Short
22 CDDI (Single) 2743 5 5,4,3,2,1 Short
23 4/16 Token Ring 4959 4 5,4,3,2,1 Short
24 10/100 Ethernet 2968 5 5,4,3,2,1 Short
25 25 ATM 2998 4 5,4,3,2,1 Short
26 Ultra SCSI Diff 6204 4 5,4,3,2,1 Short
Storage Devices/Bays
- Bay 3 (refer to Figure 6) can accommodate a second CD-ROM, tape drive or other media device.
- A 4.5 GB (#2900), 9.1 GB (#3027), or 18.2 GB (#2909 or #3102) hard disk can be installed in Bay 3 with a mounting kit (#6508).
- Refer to Figure 7 for additional limitations for storage devices.
Figure 6. Storage Device Locations (front view)
______________________________________________________ | | | _____________________________| | | Bay 2 Optical Storage Device| | |_____________________________| | __________________________ | | | Bay 3 Media or Disk | | | |__________________________| | | _______ | | ____________________________________ | | | | | Bay 4 Hard Disk 1 | | Bay 1 | | | | | | | | | |____________________________________| | D | | | | i | | | ____________________________________ | s | | | | Bay 5 Hard Disk 2 | | k | | | | | | e | | | |____________________________________| | t | | | | t | | | | e | | | |_______| | | | | __________________________________________ | | | | | | | Operator Panel | | | |__________________________________________| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |______________________________________________________|
Figure 7: Storage Device Features
Feature
Device Maximum Bay Number
======================== ======= ======= =======
600 MB 32X CD-ROM 2 D02,D03 2624
4.5 GB Enhanced
Ultra SCSI Disk 2 D04,D05 3028
9.1 GB Enhanced
Ultra SCSI Disk 2 D04,D05 3029
9.1 GB Enhanced 10 K rpm
Ultra SCSI Disk 2 D04,D05 2906
18.2 GB Enhanced
Ultra SCSI Disk 2 D04,D05 3103
18.2 GB Enhanced 10 K rpm
Ultra SCSI Disk 2 D04,D05 3110
4.5 GB Ultra SCSI Disk 1 D03 2900
9.1 GB Ultra SCSI Disk
(Bay 3) 1 D03 2908
9.1 GB 10 K rpm
Ultra SCSI Disk 1 D03 3027
18.2 GB Ultra SCSI Disk
(Bay 3) 1 D03 2909
18.2 GB 10 K rpm
Ultra SCSI Disk 1 D03 3102
Bay 3 Mounting Kit 1 D03 6508
4 mm 12/24 GB Tape 1 D03 6159
8 mm 20/40 GB Tape 1 D03 6156
Hardware requirements
Either an IBM-supported ASCII terminal with an attachment cable or a graphics display with an attachment cable and graphics adapter is required for initial set up and must be available locally for service. If an ASCII terminal is used, it must be attached through a serial port.
Display Cable Feature Number Matrix: 7043-270
The following chart shows the cable feature to graphics adapter reference. Check to determine which graphics, adapters, and monitors are supported on the system.
Graphics Adapters
GXT300P/
GXT2000P/ GXT4000P/
GXT130P GXT3000P GXT6000P
Displays (15D/DDC) (15D/DDC) (DVI/DDC)(6)
------------- --------- ---------- ------------
G52(1) Display NS NS
P50(1) Display Display NS
P70 4238 4238 4238
P200 4238 4238 4238
P201 4237 4237 4237
P72(1) Display Display Display
P92(7) Display Display Display
P202(7) Display Display Display
P76(1) Display Display Display
P260(2) Display Display Display
6091-19I NS 4239(5) NS
POWERDP17 4217 4239(5) NS
POWERDP20 4217 4239(5) NS
6549-G96 Display Display NS
6658-Hxx (T84H) Display Display Display
9493-Axx (T56A) Display NS NS
9497-Axx (T86A) Display Display Display
9511-Hxx (T54H) Display NS NS
9511-Axx (T54A) Display NS NS
9513-Axx (T55A) Display NS NS
9516-Bxx 4217 4217 4217
9519-Axx (T85A) Display Display NS
NS = Not Supported - This display/adapter combination is not supported.
Display - The appropriate cable is included with the display.
@ - Order under machine type 7250
Note: (1) Captured 15-pin D-shell cable.
Note: (2) Dual input 15-pin D-shell connector on monitor.
Note: (4) 4213 adapter connects the 15-pin D-shell cable to the 13W3 connector.
Note: (5) FC #4239 (3 BNC Cable) is recommended on GXT2000P and GXT3000P. FC #4217 is a 5BNC cable (external in H and V synch).
Note: (6) Must use DVI to 15-pin D-shell converter supplied with the GXT4000P or the GXT6000P.
Note: (7) Dual input has a 13W3 and 15-pin D-shell connectors on monitor.
Note: #4242 is a 6-foot extension display cable that allows a monitor with a 15-pin D-shell connector to be farther away from the graphics adapter than its attached cable allows. Ship this cable with rack-based systems.
Software requirements
AIX Version 4.3.3.
Back to top
Publications
The following publications are shipped with the product. Additional copies are available.
- 44P Series Model 270 Setup Instructions (SA38-0574)
- 44P Series Model 270 User's Guide (SA38-0573)
- Customer Support Information (U.S. and Canadian customers only) (SA23-2690)
- RS/6000 System Unit Safety Information (SA23-2652)
- PCI Adapter Placement Reference Guide (SA38-0538)
- Customer Installable Options Library CD-ROM(1)
- Warranty Booklet (U.S. customers only)
Note: (1) The CD-ROM cannot be ordered; shipped only at manufacturing. No form number.
Back to top
Features
|
Features - No charge | |
Feature descriptions |
|
Features - Chargeable | |
Feature exchanges |
|
Feature availability matrix | ||
Features - No charge
- Languages:
- (#9300) - Language Group Specify - US English
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- Line Cords:
- (#9800) - Power Cord Specify - United States/Canada
- (#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A)
- (#9821) - Power Cord Specify - Denmark (250V, 10A)
- (#9825) - Power Cord Specify - United Kingdom (250V, 13A)
- (#9827) - Power Cord Specify - Israel (250V, 6-16A)
- (#9828) - Power Cord Specify - Switzerland (250V, 10A)
- (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
- (#9830) - Power Cord Specify - Italy (250V, 10A and 16A)
- (#9831) - Power Cord Specify - Argentina (250V, 10A)
- (#9833) - Power Cord Specify - Thailand (250V, 15A)
- (#9834) - Power Cord Specify - Uruguay (250V, 10A)
- Miscellaneous
- (#5001) - Customer Service Specify
Features - Chargeable
Special Features - Initial Orders
Not applicable.
Special Features - Plant and/or Field Installable
- Adapters
- (#2494) - PCI 3-Channel Ultra2 SCSI RAID Adapter
- (#2498) - PCI 4-Channel Ultra3 SCSI RAID Adapter
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#2946) - Turboways 622 Mbps PCI MMF ATM Adapter
- (#2975) - 10/100/1000 Base-T Ethernet PCI Adapter
- (#4960) - IBM e-business Cryptographic Accelerator
- (#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- (#4963) - PCI Cryptographic Coprocessor (FIPS-4)
- (#4964) - PCI Cryptographic Coprocessor
- (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
- (#6203) - PCI Dual Channel Ultra3 SCSI Adapter
- (#6204) - PCI Universal Differential Ultra SCSI Adapter
- (#6205) - PCI Dual Channel Ultra2 SCSI Adapter
- (#6206) - PCI Single-Ended Ultra SCSI Adapter
- (#6207) - PCI Differential Ultra SCSI Adapter
- (#6215) - PCI SSA Multi-Initiator/RAID EL Adapter
- (#6222) - SSA Fast-Write Cache
- (#6225) - IBM Advanced SerialRAID Adapter
- (#6228) - Gigabit Fibre Channel Adapter for 64-bit PCI Bus
- (#6230) - Advanced SerialRAID Plus Adapter
- (#6231) - 128 MByte DRAM Option Card
- (#6235) - 32 MByte Fast-Write Cache Option Card
- (#2823) - POWER GXT2000P Graphics Accelerator
- (#2825) - POWER GXT3000P Graphics Accelerator
- (#2826) - POWER GXT4000P Graphics Accelerator
- (#2827) - POWER GXT6000P Graphics Accelerator
- (#2830) - POWER GXT130P Graphics Accelerator
- (#2838) - POWER GXT120P Graphics Adapter - PCI
- (#2841) - POWER GXT300P Graphics Accelerator
- (#2842) - POWER GXT4500P Graphics Accelerator
- (#2843) - POWER GXT6500P Graphics Accelerator
- (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
- (#2851) - POWER GXT250P Graphics Adapter - PCI
- (#2852) - POWER GXT255P Graphics Adapter - PCI
- (#2741) - SysKonnect SK-NET FDDI-LP SAS PCI
- (#2742) - SysKonnect SK-NET FDDI-LP DAS PCI
- (#2743) - SysKonnect SK-NET FDDI-UP SAS PCI
- (#2920) - IBM PCI Token-Ring Adapter
- (#2963) - TURBOWAYS 155 PCI UTP ATM Adapter
- (#2968) - IBM 10/100 Mbps Ethernet PCI Adapter
- (#2969) - Gigabit Ethernet - SX PCI Adapter
- (#2988) - TURBOWAYS 155 PCI MMF ATM Adapter
- (#2998) - TURBOWAYS 25 ATM PCI Adapter
- (#4951) - IBM Four Port 10/100 Ethernet Adapter
- (#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
- (#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
- (#4958) - PCI Cryptographic Coprocessor
- (#4959) - IBM Token-Ring PCI Adapter
- (#2708) - Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter
- (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
- (#2948) - IBM ARTIC960Hx 4-Port T1/E1 PCI Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#6310) - IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
- (#6311) - IBM ARTIC960RxF PCI Adapter for RS/6000
- (#2639) - Ultimedia Video Capture Adapter/S - PCI
- Cables
- (#2456) - LC-SC 50 Micron Fibre Converter Cable
- (#2459) - LC-SC 62.5-Micron Fiber Converter Cable
- (#2934) - Asynchronous Terminal/Printer Cable EIA-232
- (#2936) - Asynchronous Cable EIA-232/V.24
- (#2945) - Asynchronous Terminal Cable - EIA-422A
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8135) - 64-Port to 128-Port Pin-Out Converter
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- (#8138) - Enhanced Remote Asynchronous Node 16-Port RS-422
- (#2111) - PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
- (#2112) - PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device Cable
- (#2113) - PCI SCSI Adapter To Single Port 8-Bit SE External Device Cable
- (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
- (#2115) - PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable
- (#2116) - PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable
- (#2117) - PCI SCSI Adapter 16-bit SE External Y Cable
- (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
- (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
- (#2425) - 2.5M 16-bit SCSI-2 System to System Cable
- (#4217) - 6091 Attachment Cable
- (#4235) - 15 Pin-D Shell to 13W3 Display Cable
- (#4238) - DDC 15 Pin to 13W3 Display Cable
- (#4239) - 15-D Adapter to 3BNC ID Cable
- (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
- (#4223) - Ethernet 10Base2 Transceiver
- (#4224) - Ethernet 10BaseT Transceiver
- (#2709) - ARTIC960Hx 4-Port T1 RJ48 Cable
- (#2710) - ARTIC960Hx 4-Port E1 RJ48 Cable
- (#2861) - ARTIC960Hx 4-Port EIA-232 Cable
- (#2862) - ARTIC960Hx 4-Port RS-449 Cable
- (#2863) - ARTIC960Hx 4-Port X.21 Cable
- (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
- (#2865) - ARTIC960Hx 4-Port EIA-530 Cable
- (#2871) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
- (#2872) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
- (#2873) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable
- (#2874) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable
- (#2875) - IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, 1.8M 4-Port Cable
- (#2876) - IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Ungrounded, 1.8M 4-Port Cable
- (#2951) - Cable, V.24 / EIA-232
- (#2952) - Cable, V.35
- (#2953) - Cable, V.36 / EIA-499
- (#2954) - Cable, X.21
- (#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
- (#2878) - IBM ARTIC960RxD Quad DTA, SC Bus, 5-Drop Cable
- (#2879) - IBM ARTIC960RxD Quad DTA, Four H.100 to SC bus Converter Cable
- (#3124) - Serial to Serial Port Cable for Drawer/Drawer
- (#3125) - Serial to Serial Port Cable for Rack/Rack
- Disks
- (#2900) - 4.5GB Ultra-SCSI 16-bit Disk Drive
- (#2906) - 9.1GB 10,000 RPM Ultra-SCSI 16-bit Enhanced Disk Drive
- (#2908) - 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
- (#2909) - 18.2 GB Ultra-SCSI 1" High (25mm) Disk Drive
- (#3027) - 9.1GB 10,000 RPM Ultra-SCSI Disk Drive
- (#3028) - 4.5GB Ultra-SCSI 16-bit Hot Swap Disk Drive
- (#3029) - 9.1GB Ultra-SCSI 16-bit Enhanced Disk Drive
- (#3102) - 18.2 GB 10,000 RPM Ultra SCSI Disk Drive
- (#3103) - 18.2GB Ultra-SCSI Enhanced Disk Drive
- (#3110) - 18.2GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
- (#3118) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive
- (#3119) - 36.4GB 10,000 RPM Ultra SCSI Disk Drive
- (#3128) - 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
- (#3163) - 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
- (#6505) - Carrier for Ultra-SCSI 16-bit Disk
- (#6508) - Media Bay Disk Drive Mounting Kit
- Displays
- (#3620) - IBM P72 Color Monitor
- (#3621) - IBM P92 Color Monitor
- (#3622) - IBM P202 Color Monitor
- (#3623) - IBM P72 Color Monitor, Business Black, Captured Cable
- (#3625) - IBM P92 Color Monitor, Business Black, and Cable
- (#3626) - IBM P202 Color Monitor, Business Black, and Cable
- (#3627) - IBM P76/P77 Color Monitor, Business Black, Captured Cable
- (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
- (#3629) - IBM P76/P77 Color Monitor, Pearl White, Captured Cable
- (#3630) - IBM P260/P275 Color Monitor, Pearl White, and Cable
- (#3635) - T210 Flat-Panel Monitor
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - IBM ThinkVision L171p Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- Keyboards
- (#6600) - Quiet Touch Keyboard, US English, #103P
- (#6601) - Quiet Touch Keyboard, French, #189
- (#6602) - Quiet Touch Keyboard, Italian, #142
- (#6603) - Quiet Touch Keyboard, German/Austrian, #129
- (#6604) - Quiet Touch Keyboard, UK English, #166
- (#6605) - Quiet Touch Keyboard, Spanish, #172
- (#6606) - Quiet Touch Keyboard, Japanese, #194
- (#6607) - Quiet Touch Keyboard, Brazilian Portuguese, #275
- (#6608) - Quiet Touch Keyboard, Canadian French, #058
- (#6609) - Quiet Touch Keyboard, Belgian/French, #120
- (#6610) - Quiet Touch Keyboard, Belgian/UK-Flemish, #120
- (#6611) - Quiet Touch Keyboard, Swedish/Finnish, #153
- (#6612) - Quiet Touch Keyboard, Danish, #159
- (#6613) - Quiet Touch Keyboard, Bulgarian, #442
- (#6614) - Quiet Touch Keyboard, Swiss,French/German, #150f/g
- (#6616) - Quiet Touch Keyboard, Norwegian, #155
- (#6617) - Quiet Touch Keyboard, Dutch, #143
- (#6618) - Quiet Touch Keyboard, Portuguese, #163
- (#6619) - Quiet Touch Keyboard, Greek, #319
- (#6620) - Quiet Touch Keyboard, Hebrew, #212
- (#6621) - Quiet Touch Keyboard, Hungarian, #208
- (#6622) - Quiet Touch Keyboard, Icelandic, #197
- (#6623) - Quiet Touch Keyboard, Polish, #214
- (#6624) - Quiet Touch Keyboard, Romanian, #446
- (#6625) - Quiet Touch Keyboard, Slovakian, #245
- (#6626) - Quiet Touch Keyboard, Czech, #243
- (#6627) - Quiet Touch Keyboard, Turkish, #179
- (#6628) - Quiet Touch Keyboard, Turkish, #440
- (#6629) - Quiet Touch Keyboard, LA Spanish, #171
- (#6630) - Quiet Touch Keyboard, Arabic, #238
- (#6632) - Quiet Touch Keyboard, Serbian-Cyrillic, #118
- (#6633) - Quiet Touch Keyboard, Korean, #413
- (#6634) - Quiet Touch Keyboard, Chinese/US, #467
- (#6635) - Quiet Touch Keyboard, French Canadian, #445
- (#6636) - Quiet Touch Keyboard, Thailand, #191
- (#6638) - Quiet Touch Keyboard, Russian, #443
- (#6639) - Quiet Touch Keyboard, Croatian, #105
- (#6640) - Quiet Touch Keyboard, US English ISO9995, #103P
- (#8700) - Quiet Touch Keyboard - Business Black, US English, #103P
- (#8701) - Quiet Touch Keyboard - Business Black, French, #189
- (#8702) - Quiet Touch Keyboard - Business Black, Italian, #142
- (#8703) - Quiet Touch Keyboard - Business Black, German/Austrian, #129
- (#8704) - Quiet Touch Keyboard - Business Black, UK English, #166
- (#8705) - Quiet Touch Keyboard - Business Black, Spanish, #172
- (#8706) - Quiet Touch Keyboard - Business Black, Japanese, #194
- (#8707) - Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275
- (#8708) - Quiet Touch Keyboard - Business Black, Canadian French, #058
- (#8709) - Quiet Touch Keyboard - Business Black, Belgian/French, #120
- (#8710) - Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120
- (#8711) - Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153
- (#8712) - Quiet Touch Keyboard - Business Black, Danish, #159
- (#8713) - Quiet Touch Keyboard - Business Black, Bulgarian, #442
- (#8714) - Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g
- (#8716) - Quiet Touch Keyboard - Business Black, Norwegian, #155
- (#8717) - Quiet Touch Keyboard - Business Black, Dutch, #143
- (#8718) - Quiet Touch Keyboard - Business Black, Portuguese, #163
- (#8719) - Quiet Touch Keyboard - Business Black, Greek, #319
- (#8720) - Quiet Touch Keyboard - Business Black, Hebrew, #212
- (#8721) - Quiet Touch Keyboard - Business Black, Hungarian, #208
- (#8722) - Quiet Touch Keyboard - Business Black, Icelandic, #197
- (#8723) - Quiet Touch Keyboard - Business Black, Polish, #214
- (#8724) - Quiet Touch Keyboard - Business Black, Romanian, #446
- (#8725) - Quiet Touch Keyboard - Business Black, Slovakian, #245
- (#8726) - Quiet Touch Keyboard - Business Black, Czech, #243
- (#8727) - Quiet Touch Keyboard - Business Black, Turkish, #179
- (#8728) - Quiet Touch Keyboard - Business Black, Turkish, #440
- (#8729) - Quiet Touch Keyboard - Business Black, LA Spanish, #171
- (#8730) - Quiet Touch Keyboard - Business Black, Arabic, #238
- (#8732) - Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118
- (#8733) - Quiet Touch Keyboard - Business Black, Korean, #413
- (#8734) - Quiet Touch Keyboard - Business Black, Chinese/US, #467
- (#8735) - Quiet Touch Keyboard - Business Black, French Canadian, #445
- (#8736) - Quiet Touch Keyboard - Business Black, Thailand, #191
- (#8738) - Quiet Touch Keyboard - Business Black, Russian, #443
- (#8739) - Quiet Touch Keyboard - Business Black, Croatian, #105
- (#8740) - Quiet Touch Keyboard - Business Black, US English ISO9995, #103P
- Memory
- (#4107) - 64MB(2X32MB) DIMMS, 200 pin 10NS SDRAM
- (#4110) - 256MB(2X128MB) DIMMS, 200 pin 10NS SDRAM
- (#4119) - 512MB (2X256MB) DIMMs, 200-pin 10NS SDRAM
- (#4120) - 512MB (2x256MB)Memory DIMMS
- (#4121) - 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM
- (#4098) - Memory Expansion Feature (16 POS)
- Media Devices
- (#2623) - 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
- (#2624) - 32X (Max) SCSI-2 CD-ROM Drive
- (#2627) - 4.7 GB SCSI-2 DVD-RAM Drive (White Bezel)
- (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology
- (#6134) - 60/150 GB 16-bit 8mm Internal Tape Drive
- (#6156) - 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
- (#6158) - 20/40GB 4mm Internal Tape Drive
- (#6159) - 12/24GB 4mm Internal Tape Drive
- Miscellaneous
- (#3752) - Service Package
- (#3753) - Options Library (hard copy)
- (#6041) - 3-Button Mouse
- (#6308) - Personal Microphone
- (#8422) - Spaceball 3D Input Device
- (#8423) - Magellan XT 3D Input Device
- (#8741) - 3-Button Mouse - Business Black
- Processors
- (#4361) - 1-Way 375MHz POWER3-II Processor Card
- (#4362) - 2-Way 375MHz POWER3-II Processor Card
- (#4365) - 2-WAY 375MHz POWER3-II Processor Card (8MB L2/Processor)
- (#4366) - 2-WAY 450MHz POWER3-II Processor Card (8MB L2/Processor)
- Specify Codes
- (#9004) - Southern Hemisphere Designator for Monitors
Feature availability matrix
The following feature availability matrix for MT 7043 uses the letter "A" to indicate features that are available and orderable on the specified models. "S" indicates a feature that is supported on the new model during a model conversion; these features will work on the new model, but additional quantities of these features cannot be ordered on the new model; they can only be removed. "N" indicates that the feature is not supported on the new model and must be removed during the model conversion. As additional features are announced, supported, or withdrawn, this list will be updated. Please check with your Marketing Representative for additional information.
|2| A = AVAILABLE S = SUPPORTED
|7| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
2111 |S| PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
2112 |S| PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device
| | Cable
2113 |S| PCI SCSI Adapter To Single Port 8-Bit SE External Device
| | Cable
2114 |S| PCI SCSI Adapter 16-Bit Differential External Y Cable
2115 |S| PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable
2116 |S| PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device
| | Cable
2117 |S| PCI SCSI Adapter 16-bit SE External Y Cable
2118 |S| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
2424 |S| 0.6M 16-bit SCSI-2 System to System Cable
2425 |S| 2.5M 16-bit SCSI-2 System to System Cable
2456 |S| LC-SC 50 Micron Fibre Converter Cable
2459 |S| LC-SC 62.5-Micron Fiber Converter Cable
2494 |S| PCI 3-Channel Ultra2 SCSI RAID Adapter
2498 |S| PCI 4-Channel Ultra3 SCSI RAID Adapter
2623 |S| 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
2624 |S| 32X (Max) SCSI-2 CD-ROM Drive
2627 |S| 4.7 GB SCSI-2 DVD-RAM Drive (White Bezel)
2639 |S| Ultimedia Video Capture Adapter/S - PCI
2708 |S| Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter
2709 |S| ARTIC960Hx 4-Port T1 RJ48 Cable
2710 |S| ARTIC960Hx 4-Port E1 RJ48 Cable
2741 |S| SysKonnect SK-NET FDDI-LP SAS PCI
2742 |S| SysKonnect SK-NET FDDI-LP DAS PCI
2743 |S| SysKonnect SK-NET FDDI-UP SAS PCI
2823 |S| POWER GXT2000P Graphics Accelerator
2825 |S| POWER GXT3000P Graphics Accelerator
2826 |S| POWER GXT4000P Graphics Accelerator
2827 |S| POWER GXT6000P Graphics Accelerator
2830 |S| POWER GXT130P Graphics Accelerator
2838 |S| POWER GXT120P Graphics Adapter - PCI
2841 |S| POWER GXT300P Graphics Accelerator
2842 |A| POWER GXT4500P Graphics Accelerator
2843 |A| POWER GXT6500P Graphics Accelerator
2849 |S| POWER GXT135P Graphics Accelerator with Digital Support
2851 |S| POWER GXT250P Graphics Adapter - PCI
2852 |S| POWER GXT255P Graphics Adapter - PCI
2861 |S| ARTIC960Hx 4-Port EIA-232 Cable
2862 |S| ARTIC960Hx 4-Port RS-449 Cable
2863 |S| ARTIC960Hx 4-Port X.21 Cable
2864 |S| ARTIC960Hx 4-Port V.35 (DTE) Cable
2865 |S| ARTIC960Hx 4-Port EIA-530 Cable
2871 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
2872 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
2873 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
| | Cable
2874 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
| | Extension Cable
2875 |S| IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded,
| | 1.8M 4-Port Cable
2876 |S| IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Ungrounded,
| | 1.8M 4-Port Cable
2877 |S| IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
2878 |S| IBM ARTIC960RxD Quad DTA, SC Bus, 5-Drop Cable
2879 |S| IBM ARTIC960RxD Quad DTA, Four H.100 to SC bus Converter
| | Cable
2900 |S| 4.5GB Ultra-SCSI 16-bit Disk Drive
2906 |S| 9.1GB 10,000 RPM Ultra-SCSI 16-bit Enhanced Disk Drive
2908 |S| 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
2909 |S| 18.2 GB Ultra-SCSI 1" High (25mm) Disk Drive
2920 |S| IBM PCI Token-Ring Adapter
2934 |S| Asynchronous Terminal/Printer Cable EIA-232
2936 |S| Asynchronous Cable EIA-232/V.24
2943 |S| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944 |S| 128-Port Asynchronous Controller, PCI bus
2945 |S| Asynchronous Terminal Cable - EIA-422A
2946 |S| Turboways 622 Mbps PCI MMF ATM Adapter
2947 |S| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
2948 |S| IBM ARTIC960Hx 4-Port T1/E1 PCI Adapter
2951 |S| Cable, V.24 / EIA-232
2952 |S| Cable, V.35
2953 |S| Cable, V.36 / EIA-499
2954 |S| Cable, X.21
2962 |S| 2-Port Multiprotocol PCI Adapter
2963 |S| TURBOWAYS 155 PCI UTP ATM Adapter
2968 |S| IBM 10/100 Mbps Ethernet PCI Adapter
2969 |S| Gigabit Ethernet - SX PCI Adapter
2975 |S| 10/100/1000 Base-T Ethernet PCI Adapter
2988 |S| TURBOWAYS 155 PCI MMF ATM Adapter
2998 |S| TURBOWAYS 25 ATM PCI Adapter
3027 |S| 9.1GB 10,000 RPM Ultra-SCSI Disk Drive
3028 |S| 4.5GB Ultra-SCSI 16-bit Hot Swap Disk Drive
3029 |S| 9.1GB Ultra-SCSI 16-bit Enhanced Disk Drive
3102 |S| 18.2 GB 10,000 RPM Ultra SCSI Disk Drive
3103 |S| 18.2GB Ultra-SCSI Enhanced Disk Drive
3110 |S| 18.2GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
3118 |S| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive
3119 |S| 36.4GB 10,000 RPM Ultra SCSI Disk Drive
3128 |S| 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
3124 |S| Serial to Serial Port Cable for Drawer/Drawer
3125 |S| Serial to Serial Port Cable for Rack/Rack
3163 |S| 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
3620 |S| IBM P72 Color Monitor
3621 |S| IBM P92 Color Monitor
3622 |S| IBM P202 Color Monitor
3623 |S| IBM P72 Color Monitor, Business Black, Captured Cable
3625 |S| IBM P92 Color Monitor, Business Black, and Cable
3626 |S| IBM P202 Color Monitor, Business Black, and Cable
3627 |S| IBM P76/P77 Color Monitor, Business Black, Captured Cable
3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable
3629 |S| IBM P76/P77 Color Monitor, Pearl White, Captured Cable
3630 |S| IBM P260/P275 Color Monitor, Pearl White, and Cable
3635 |S| T210 Flat-Panel Monitor
3636 |S| L200P Flat Panel Monitor
3637 |S| IBM T541H/L150p 15" TFT Color Monitors, Business Black,
| | Captured Cable
3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable
3639 |S| IBM ThinkVision L170p Flat Panel Monitor
3640 |S| IBM ThinkVision L171p Flat Panel Monitor
3642 |S| ThinkVision L191p Flat Panel Monitor
3752 |S| Service Package
3753 |N| Options Library (hard copy)
4098 |S| Memory Expansion Feature (16 POS)
4107 |S| 64MB(2X32MB) DIMMS, 200 pin 10NS SDRAM
4110 |S| 256MB(2X128MB) DIMMS, 200 pin 10NS SDRAM
4119 |S| 512MB (2X256MB) DIMMs, 200-pin 10NS SDRAM
4120 |S| 512MB (2x256MB)Memory DIMMS
4121 |S| 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM
4217 |S| 6091 Attachment Cable
4223 |S| Ethernet 10Base2 Transceiver
4224 |S| Ethernet 10BaseT Transceiver
4235 |S| 15 Pin-D Shell to 13W3 Display Cable
4238 |S| DDC 15 Pin to 13W3 Display Cable
4239 |S| 15-D Adapter to 3BNC ID Cable
4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15
| | pin D-shell)
4342 |N| 1-Way, 200MHZ POWER3 Processor Card
4361 |S| 1-Way 375MHz POWER3-II Processor Card
4362 |S| 2-Way 375MHz POWER3-II Processor Card
4365 |S| 2-WAY 375MHz POWER3-II Processor Card (8MB L2/Processor)
4366 |S| 2-WAY 450MHz POWER3-II Processor Card (8MB L2/Processor)
4951 |S| IBM Four Port 10/100 Ethernet Adapter
4953 |S| IBM 64bit/66MHz PCI ATM 155 UTP Adapter
4957 |S| IBM 64bit/66MHz PCI ATM 155 MMF Adapter
4958 |S| PCI Cryptographic Coprocessor
4959 |S| IBM Token-Ring PCI Adapter
4960 |S| IBM e-business Cryptographic Accelerator
4961 |S| IBM Universal 4-Port 10/100 Ethernet Adapter
4962 |S| 10/100 Mbps Ethernet PCI Adapter II
4963 |N| PCI Cryptographic Coprocessor (FIPS-4)
4964 |S| PCI Cryptographic Coprocessor
5001 |S| Customer Service Specify
5005 |N| Software Preinstall
5700 |A| IBM Gigabit Ethernet-SX PCI-X Adapter
5701 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
5706 |S| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
5707 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
6041 |S| 3-Button Mouse
6120 |S| IBM 80/160 GB Internal Tape Drive with VXA Technology
6134 |N| 60/150 GB 16-bit 8mm Internal Tape Drive
6154 |S| 20/40GB 16-bit 8mm Internal Tape Drive (White Bezel)
6156 |S| 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
6158 |S| 20/40GB 4mm Internal Tape Drive
6159 |S| 12/24GB 4mm Internal Tape Drive
6203 |S| PCI Dual Channel Ultra3 SCSI Adapter
6204 |S| PCI Universal Differential Ultra SCSI Adapter
6205 |S| PCI Dual Channel Ultra2 SCSI Adapter
6206 |S| PCI Single-Ended Ultra SCSI Adapter
6207 |S| PCI Differential Ultra SCSI Adapter
6215 |S| PCI SSA Multi-Initiator/RAID EL Adapter
6222 |S| SSA Fast-Write Cache
6225 |S| IBM Advanced SerialRAID Adapter
6227 |S| Gigabit Fibre Channel Adapter for PCI Bus
6228 |S| Gigabit Fibre Channel Adapter for 64-bit PCI Bus
6230 |S| Advanced SerialRAID Plus Adapter
6231 |S| 128 MByte DRAM Option Card
6235 |S| 32 MByte Fast-Write Cache Option Card
6308 |S| Personal Microphone
6310 |S| IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
6311 |S| IBM ARTIC960RxF PCI Adapter for RS/6000
6505 |S| Carrier for Ultra-SCSI 16-Bit Disk
6508 |S| Media Bay Disk Drive Mounting Kit
6600 |S| Quiet Touch Keyboard, US English, #103P
6601 |S| Quiet Touch Keyboard, French, #189
6602 |S| Quiet Touch Keyboard, Italian, #142
6603 |S| Quiet Touch Keyboard, German/Austrian, #129
6604 |S| Quiet Touch Keyboard, UK English, #166
6605 |S| Quiet Touch Keyboard, Spanish, #172
6606 |S| Quiet Touch Keyboard, Japanese, #194
6607 |S| Quiet Touch Keyboard, Brazilian Portuguese, #275
6608 |S| Quiet Touch Keyboard, Canadian French, #058
6609 |S| Quiet Touch Keyboard, Belgian/French, #120
6610 |S| Quiet Touch Keyboard, Belgian/UK-Flemish, #120
6611 |S| Quiet Touch Keyboard, Swedish/Finnish, #153
6612 |S| Quiet Touch Keyboard, Danish, #159
6613 |S| Quiet Touch Keyboard, Bulgarian, #442
6614 |S| Quiet Touch Keyboard, Swiss,French/German, #150f/g
6616 |S| Quiet Touch Keyboard, Norwegian, #155
6617 |S| Quiet Touch Keyboard, Dutch, #143
6618 |S| Quiet Touch Keyboard, Portuguese, #163
6619 |S| Quiet Touch Keyboard, Greek, #319
6620 |S| Quiet Touch Keyboard, Hebrew, #212
6621 |S| Quiet Touch Keyboard, Hungarian, #208
6622 |S| Quiet Touch Keyboard, Icelandic, #197
6623 |S| Quiet Touch Keyboard, Polish, #214
6624 |S| Quiet Touch Keyboard, Romanian, #446
6625 |S| Quiet Touch Keyboard, Slovakian, #245
6626 |S| Quiet Touch Keyboard, Czech, #243
6627 |S| Quiet Touch Keyboard, Turkish, #179
6628 |S| Quiet Touch Keyboard, Turkish, #440
6629 |S| Quiet Touch Keyboard, LA Spanish, #171
6630 |S| Quiet Touch Keyboard, Arabic, #238
6632 |S| Quiet Touch Keyboard, Serbian-Cyrillic, #118
6633 |S| Quiet Touch Keyboard, Korean, #413
6634 |S| Quiet Touch Keyboard, Chinese/US, #467
6635 |S| Quiet Touch Keyboard, French Canadian, #445
6636 |S| Quiet Touch Keyboard, Thailand, #191
6638 |S| Quiet Touch Keyboard, Russian, #443
6639 |S| Quiet Touch Keyboard, Croatian, #105
6640 |S| Quiet Touch Keyboard, US English ISO9995, #103P
7773 |A| OEM (GROUPE BULL) Indicator
8131 |S| 128-Port Asynchronous Controller Cable, 4.5 Meter
8132 |S| 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
8133 |S| RJ-45 to DB-25 Converter Cable
8135 |S| 64-Port to 128-Port Pin-Out Converter
8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232
8138 |S| Enhanced Remote Asynchronous Node 16-Port RS-422
8422 |S| Spaceball 3D Input Device
8423 |S| Magellan XT 3D Input Device
8700 |S| Quiet Touch Keyboard - Business Black, US English, #103P
8701 |S| Quiet Touch Keyboard - Business Black, French, #189
8702 |S| Quiet Touch Keyboard - Business Black, Italian, #142
8703 |S| Quiet Touch Keyboard - Business Black, German/Austrian, #129
8704 |S| Quiet Touch Keyboard - Business Black, UK English, #166
8705 |S| Quiet Touch Keyboard - Business Black, Spanish, #172
8706 |S| Quiet Touch Keyboard - Business Black, Japanese, #194
8707 |S| Quiet Touch Keyboard - Business Black, Brazilian Portuguese,
| | #275
8708 |S| Quiet Touch Keyboard - Business Black, Canadian French, #058
8709 |S| Quiet Touch Keyboard - Business Black, Belgian/French, #120
8710 |S| Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
| | #120
8711 |S| Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153
8712 |S| Quiet Touch Keyboard - Business Black, Danish, #159
8713 |S| Quiet Touch Keyboard - Business Black, Bulgarian, #442
8714 |S| Quiet Touch Keyboard - Business Black, Swiss,French/German,
| | #150f/g
8716 |S| Quiet Touch Keyboard - Business Black, Norwegian, #155
8717 |A| Quiet Touch Keyboard - Business Black, Dutch, #143
8718 |S| Quiet Touch Keyboard - Business Black, Portuguese, #163
8719 |S| Quiet Touch Keyboard - Business Black, Greek, #319
8720 |S| Quiet Touch Keyboard - Business Black, Hebrew, #212
8721 |S| Quiet Touch Keyboard - Business Black, Hungarian, #208
8722 |S| Quiet Touch Keyboard - Business Black, Icelandic, #197
8723 |S| Quiet Touch Keyboard - Business Black, Polish, #214
8724 |S| Quiet Touch Keyboard - Business Black, Romanian, #446
8725 |S| Quiet Touch Keyboard - Business Black, Slovakian, #245
8726 |S| Quiet Touch Keyboard - Business Black, Czech, #243
8727 |S| Quiet Touch Keyboard - Business Black, Turkish, #179
8728 |S| Quiet Touch Keyboard - Business Black, Turkish, #440
8729 |S| Quiet Touch Keyboard - Business Black, LA Spanish, #171
8730 |S| Quiet Touch Keyboard - Business Black, Arabic, #238
8732 |S| Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118
8733 |S| Quiet Touch Keyboard - Business Black, Korean, #413
8734 |S| Quiet Touch Keyboard - Business Black, Chinese/US, #467
8735 |S| Quiet Touch Keyboard - Business Black, French Canadian, #445
8736 |S| Quiet Touch Keyboard - Business Black, Thailand, #191
8738 |S| Quiet Touch Keyboard - Business Black, Russian, #443
8739 |S| Quiet Touch Keyboard - Business Black, Croatian, #105
8740 |S| Quiet Touch Keyboard - Business Black, US English ISO9995,
| | #103P
8741 |S| 3-Button Mouse - Business Black
9004 |S| Southern Hemisphere Designator for Monitors
9300 |S| Language Group Specify - US English
9703 |S| Language Group Specify - French
9704 |S| Language Group Specify - German
9705 |S| Language Group Specify - Polish
9707 |S| Language Group Specify - Portuguese
9708 |S| Language Group Specify - Spanish
9711 |S| Language Group Specify - Italian
9712 |S| Language Group Specify - Canadian French
9714 |S| Language Group Specify - Japanese
9715 |S| Language Group Specify - Traditional Chinese (Taiwan)
9716 |S| Language Group Specify - Korean
9719 |S| Language Group Specify - Hungarian
9720 |S| Language Group Specify - Slovakian
9721 |S| Language Group Specify - Russian
9800 |S| Power Cord Specify - United States/Canada
9820 |S| Power Cord Specify - Belgium, Finland, France (250V, 16A)
9821 |S| Power Cord Specify - Denmark (250V, 10A)
9825 |S| Power Cord Specify - United Kingdom (250V, 13A)
9827 |S| Power Cord Specify - Israel (250V, 6-16A)
9828 |S| Power Cord Specify - Switzerland (250V, 10A)
9829 |S| Power Cord Specify - South Africa/Pakistan (250V, 16A)
9830 |S| Power Cord Specify - Italy (250V, 10A and 16A)
9831 |S| Power Cord Specify - Argentina (250V, 10A)
9833 |S| Power Cord Specify - Thailand (250V, 15A)
9834 |S| Power Cord Specify - Uruguay (250V, 10A)
Feature descriptions
The following is a list of all feature codes in numeric order for the IBM RS/6000 7043 machine type.
Attributes, as defined in the following feature descriptions, state the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features. The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities.
The order type defines if a feature is orderable only on initial orders, only on MES orders, on both initial and MES orders, or if a feature is supported on a model due to a model conversion. Supported features cannot be ordered on the converted model, only left on or removed from the converted model.
(#2111) PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of external 2-port, 8-bit devices to the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-270: (#2111)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2112) PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device C able
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of external 2-port, 8-bit differential devices to the PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-270: (#2112)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2113) PCI SCSI Adapter To Single Port 8-Bit SE External Device Cable
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of external single-port, 8-bit SE devices to the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-270: (#2113)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-270: (#2114)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2115) PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable
(No Longer Available as of April 26, 2002)
- Attributes provided: Attachment of external 2-port 16-bit SE devices to the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-270: (#2115)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2116) PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable
(No Longer Available as of April 26, 2002)
- Attributes provided: Attachment of external 2-port 16-bit differential devices to the PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-270: (#2116)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2117) PCI SCSI Adapter 16-bit SE External Y Cable
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 External SCSI-2 Port
- For 7043-270: (#2117)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
(No Longer Available as of June 23, 2006)
0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI connector to a 68 pin P style connector. Cable has male Mini-68 pin VHDCI connector on one end and a female 68 pin P style connector on the other. Length = 0.3 meters.
- Attributes provided: Attachment of supported external sub-system to integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
- Attributes required: None
- For 7043-270: (#2118)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2424) 0.6M 16-bit SCSI-2 System to System Cable
(No Longer Available as of December 10, 2004)
This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system.
- Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at each end
- Attributes required: 68-pin SCSI Interface
- For 7043-270: (#2424)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2425) 2.5M 16-bit SCSI-2 System to System Cable
(No Longer Available as of June 23, 2006)
This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system.
- Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at each end
- Attributes required: 68-pin SCSI Interface
- For 7043-270: (#2425)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2456) LC-SC 50 Micron Fibre Converter Cable
(No longer available as of December 31, 2020)
50 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 50 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector.
- Attributes required: None
- For 7043-270: (#2456)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: MES
(#2459) LC-SC 62.5-Micron Fiber Converter Cable
(No longer available as of December 31, 2020)
62.5-micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 62.5-Micron fabric or device with one type fiber connector to an adapter with the other type fiber connector.
- Attributes required: None
- For 7043-270: (#2459)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2494) PCI 3-Channel Ultra2 SCSI RAID Adapter
(No Longer Available as of December 1, 2000)
The RS/6000 PCI 3-Channel Ultra2 SCSI RAID Adapter(#2494) is a non- bootable high performance Ultra2 SCSI RAID Adapter providing RAID 0,1,or 5 capability and can address up to forty-five 16-bit SCSI-2 physical disk drives on three independent SCSI buses.
To increase the data writing performance, a 32 MByte fast-write cache is provided as a resident part of this adapter. The 32 MByte fast-write cache is a resident feature of the IBM PCI 3-Channel Ultra2 SCSI RAID Adapter that utilizes non-volatile RAM. During the unlikely event of an PCI 3-Channel Ultra2 SCSI RAID Adapter failure, a replacement PCI 3-Channel Ultra2 SCSI RAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter insuring data integrity. The 32 MByte fast-write cache can provide an significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.
The PCI 3-Channel Ultra2 SCSI RAID Adapter has one internal and two external independent Ultra2 SCSI buses. The internal port can be used to provide an internal RAID solution on supporting RS/6000 systems. Systems with internal 6-pack disks can attach one PCI 3-Channel Ultra2 SCSI RAID adapter per internal 6-pack.The two external ports provide connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. The two external ports can also connect to the IBM 7131-105 external Fast/Wide SCSI disk enclosure via an optional VHDCI to P Converter Cable (#2118). Note: Even though the PCI 3-Channel Ultra2 SCSI RAID Adapter has ports that run at Ultra2 SCSI speeds (up to 80 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system backplane. Also, the externally attached 7131-105 will only run at a maximum of Fast/Wide SCSI speeds (up to 20 MBytes/s).
In order for full support and to take full advantage of the Ultra2 (up to 80 MBytes/s) speed of this adapter, the proper AIX level also needs to be considered. AIX 4.2.1 with appropriate APAR updates and 4.3.3 or later supports the full range of SCSI bus data rates (including Ultra2 SCSI up to 80 MByte/s). AIX 4.3.2 only supports data rates up to 40 MByte/s. Check the AIX level your system has or is able to support. Appropriate AIX APAR needed are as follows:
- AIX 4.2.1 with APAR IX86638, IX86654, IX87183, IY01945, & IY02373
- AIX 4.3.2 with APAR IX86395, & IX86396
- AIX 4.3.3 or later
Upgrading an existing PCI 3-Channel Ultra SCSI RAID Adapter (#2494) to the later version PCI 3-Channel Ultra2 SCSI RAID Adapter is also available after September 24, 1999. To upgrade to the Ultra2 version (up to 80 MBytes/s capability), a new level of microcode needs to be downloaded. To obtain this later level of microcode (3.12.00 or higher), go to the below web address and follow the microcode download procedure. AIX levels with appropriate APAR updates described above also apply in conjunction with the microcode upgrade.
- Attributes provided: Attachment of internal and external SCSI devices
- Attributes required: One PCI bus slot
- For 7043-270: (#2494)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter
(No Longer Available as of December 10, 2004)
The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a non- bootable high performance Ultra3 SCSI RAID Adapter providing RAID 0,1,1E, 5, 5E capability and can address up to sixty 16-bit SCSI physical disk drives on four independent SCSI buses.
To increase the data writing performance, a 128 MByte fast-write cache is provided as a resident part of this adapter. The 128 MByte fast-write cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter that utilizes non-volatile RAM. During the unlikely event of an PCI 4-Channel Ultra3 SCSI
RAID Adapter failure, a replacement PCI 4-Channel Ultra3 SCSI RAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter insuring data integrity. The 128 MByte fast-write cache can provide an significant improvement in data throughput and response time during certain sequence write operations compared to SCSI
RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.
The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3 SCSI buses. There are two internal ports and four external ports. The two internal ports are shared with two of the external ports. Two of the four busses can drive either an internal port or an external port. The other two busses only drive external ports. The internal ports can be used to provide an internal RAID solution on supporting RS/6000 systems. Systems with one or two internal 6-pack disks can attach to a PCI 4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate. The four external ports also provide connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate.
Limitations:
- The four external ports do not support the connection to the IBM 7131-105 external Fast/Wide SCSI disk enclosure.
- Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up to 80MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system backplane.
In order for full support and to take full advantage of the Ultra3 (up to 160 MBytes/s) speed of this adapter, the proper AIX level also needs to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX versions support the full range of SCSI bus data rates (including Ultra3 SCSI up to 160 MByte/s). Check the AIX level your system has or is able to support.
- Attributes provided: Attachment of internal and external SCSI devices
- Attributes required: One PCI bus slot
- For 7043-270: (#2498)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance Package.
- Initial Order/MES/Both/Supported: MES
(#2623) 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
(No Longer Available as of September 24, 2004)
The SCSI-2 DVD-RAM drive is a multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This device also provides read/write compatibility with conventional 2.6GB DVD-RAM discs. System boot and install functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diameter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
- Interface: SCSI-2 supporting synchronous and asynchronous data transfer
- Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
- High-speed synchronous burst rate of 10MB/second
- Loading tray accommodates both 8cm discs (in horizontal orientation only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-recordable discs
- Reads CD-RW discs
- Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio
- Contains headphone output and line output for audio
Limitations:
- DVD video is not supported.
- Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM
- Attributes required: 1 half high media bay and one SCSI address
- For 7043-270: (#2623)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: MES
(#2624) 32X (Max) SCSI-2 CD-ROM Drive
(No Longer Available as of July 29, 2005)
The 32X (Max) SCSI-2 Internal CD-ROM Drive is a tray loading CD-ROM drive providing up to 4800KB/sec maximum media data transfer rate. It is a 5.25-inch half-high form factor, single-ended, 8-bit, multi-session capable, CD-ROM drive which provides state of the art performance and supports existing 600MB CD-ROM discs.
Characteristics:
- Media Data Transfer Rate: 4800 KB/sec (Max)
- Interface: SCSI-2 8-bit Single-Ended (SE)
- Avg. Random Access Time: 90ms (typical)
- Buffer Memory: 512KB
- Media capacity: Greater than 600MB
- Multisession capable (Reads CDR & CDRW media)
- 5.25-inch half-high form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
- Attributes provided: 600MB 32X (max)(up to 4800KB/sec) CDROM
- Attributes required: 1 half high media bay and 1 SCSI-2 internal SE 8-bit address
- For 7043-270: (#2624)
- Minimum required: 1
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2627) 4.7 GB SCSI-2 DVD-RAM Drive (White Bezel)
(No Longer Available as of December 27, 2002)
The SCSI-2 DVD-RAM drive is a multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This device also provides read/write compatibility with conventional 2.6GB DVD-RAM discs. System boot and install functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diam eter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
- Interface: SCSI-2 supporting synchronous and asynchronous data transfer
- Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
- High-speed synchronous burst rate of 10MB/second
- Loading tray accommodates both 8cm discs (in horizontal orientation only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-recordable discs
- Reads CD-RW discs
- Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio
- Contains headphone output and line output for audio
Limitations:
- DVD video is not supported.
- Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM
- Attributes required: 1 half high media bay and one SCSI address
- For 7043-270: (#2627)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: MES
(#2639) Ultimedia Video Capture Adapter/S - PCI
(No Longer Available as of December 1, 2000)
The Ultimedia Video Capture Adapter/S is a PCI-based adapter that allows the capture of live video and still images. This adapter, coupled with Ultimedia Services and the appropriate optional hardware, can be used for entry-level video conference, image capture, and video monitoring.
- Attributes provided: Video capture and monitoring
- Attributes required: One PCI slot
- For 7043-270: (#2639)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2708) Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter
(No Longer Available as of October 17, 2001)
Connects PCI RS/6000 systems to worldwide ISDN networks. The adapter comes from Eicon Technology, the world leader in ISDN technology, as a fully supported IBM feature. #2708 provides basic rate 2B + D with 64 Kbps on each B channel. TCP/IP applications are supported.
Note: AIX drivers are shipped on diskette with the hardware feature. Systems ordered with AIX preinstalled will have the device drivers installed on the hard disk drive.
Country approvals for ISDN network attachment:
Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxemborg, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom, United States.
Provides S/T interface, requires connection to NT-1 (Network Terminator-1) from the phone line provider.
Limitation: This adapter is not supported by AIX 5.1 (32 bit or 64 bit kernel).
- Attributes provided: One ISDN BRI connection
- Attributes required: One PCI slot
- For 7043-270: (#2708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2709) ARTIC960Hx 4-Port T1 RJ48 Cable
(No Longer Available as of June 25, 2004)
4-Port T1 RJ48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or ARTIC960RxD Quad Digital Trunk adapter.
- Attributes provided: 4-Port T1 RJ48 cable
- Attributes required: Quad Digital Trunk Adapter
- For 7043-270: (#2709)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310 adapter.
(#2710) ARTIC960Hx 4-Port E1 RJ48 Cable
(No Longer Available as of June 25, 2004)
4-Port T1 RJ48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or ARTIC960RxD Quad Digital Trunk adapter.
- Attributes provided: 4-Port E1 RJ48 Adapter
- Attributes required: Quad Digital Trunk Adapter
- For 7043-270: (#2710)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310 adapter.
(#2741) SysKonnect SK-NET FDDI-LP SAS PCI
(No Longer Available as of May 18, 2003)
- Fiber optical FDDI Single Attach Station
This adapter provides single attachment to a FDDI concentrator (or point-to-point) using fiber optic cabling (not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware. See Limitations section.
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with an FDDI SC (low cost fiber) connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have the appropriate firmware factory installed. Systems shipped prior to April 24, 1998, require an upgrade of system firmware to support the Remote IPL function for FDDI adapters. If you find you have problems with FDDI Remote IPL, make sure you obtain the latest system firmware. Instructions on how to obtain this firmware can be obtained by calling IBM Service and asking for Retain Tip H162841 or by reviewing and downloading from the RS/6000 Support microcode web page located at
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
- Attributes provided: One Single Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7043-270: (#2741)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2742) SysKonnect SK-NET FDDI-LP DAS PCI
(No Longer Available as of May 18, 2003)
- Fiber optical FDDI Dual Attach Station
This adapter provides either dual attachment to the main ring path or dual homing to one or two FDDI concentrators using fiber optic cabling (not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware. See Limitations section.
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with an FDDI SC (low cost fiber) connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have the appropriate firmware factory installed. Systems shipped prior to April 24, 1998, require an upgrade of system firmware to support the Remote IPL function for FDDI adapters. If you find you have problems with FDDI Remote IPL, make sure you obtain the latest system firmware. Instructions on how to obtain this firmware can be obtained by calling IBM Service and asking for Retain Tip H162841 or by reviewing and downloading from the RS/6000 Support microcode web page located at
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
- Attributes provided: One Dual Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7043-270: (#2742)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2743) SysKonnect SK-NET FDDI-UP SAS PCI
(No Longer Available as of July 31, 2001)
- Copper FDDI Single Attach Station
This adapter provides single attachment to a FDDI concentrator (or point-to-point) using Category-5 unshielded twisted pair (UTP) cabling (not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware. See Limitations section.
Connection requirements:
- Connect to Category-5 unshielded twisted pair FDDI concentrator ports using shielded RJ45 connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have the appropriate firmware factory installed. Systems shipped prior to April 24, 1998, require an upgrade of system firmware to support the Remote IPL function for FDDI adapters. If you find you have problems with FDDI Remote IPL, make sure you obtain the latest system firmware. Instructions on how to obtain this firmware can be obtained by calling IBM Service and asking for Retain Tip H162841 or by reviewing and downloading from the RS/6000 Support microcode web page located at
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
- Attributes provided: One Single Attach Station CDDI (copper) port
- Attributes required: One PCI Slot
- For 7043-270: (#2743)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2823) POWER GXT2000P Graphics Accelerator
(No Longer Available as of April 26, 2002)
The POWER GXT2000P Graphics Accelerator is a short PCI adapter card that attaches to one slot. It supports display resolutions up to 1920 x 1200 maximum resolution up to 76 Hz, including monitors that comply with the ISO 9241 Part 3 and Part 8 standard, and allows up to 16.7 million simultaneous colors. For the OpenGL and graPHIGS APIs, the GXT2000P offers support for 8-bit and 24-bit double-buffered color.
Characteristics of the IBM POWER GXT2000P Graphics Accelerator are:
- 1920 x 1200 maximum resolution up to 76 Hz
- Maximum refresh rate for 1600x1200 and smaller displays is 85 Hz
- 8-bit and 24-bit double-buffered color
- 24-bit Z-buffer
- 8-bit overlay buffer
- 4-bit window ID buffer
- 4-bit stencil buffer
- Four 256-entry hardware color tables
- Separate gamma correction table
- Face culling support
- OpenGL polygon offset support
- OpenGL polygon mode support
- 16 MB texture memory
- Trilinear texture mapping
- Video support
- Point sampling and bilinear scaling
- Color space conversion
- Attributes provided: Graphics capability
- Attributes required: Any Slot; one of the following monitors: P70, P200, P201, P72, P76, P92, P202 , P260, 6091-19I, POWERDP17, POWERDP20, 9516 or T85A.
- For 7043-270: (#2823)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2825) POWER GXT3000P Graphics Accelerator
(No Longer Available as of April 26, 2002)
The POWER GXT3000P Graphics Accelerator is a single PCI adapter card that attaches to one slot but covers the slot adjacent to it. It supports display resolutions up to 1280 x 1024, including monitors that comply with the ISO 9241 Part 3 standard, and allows up to 16.7 million simultaneous colors. For the OpenGL and graPHIGS APIs, the GXT3000P offers support for 8-bit and 24-bit double-buffered color.
The GXT3000P provides hardware acceleration for the new OpenGL 1.2 version of the API. Featured hardware enhancements over the POWER GXT800P include:
- OpenGL and graPHIGS lighting mode
- 3D texture mapping
- Stereo in a window
- Video scaling
Characteristics of the IBM POWER GXT3000P Graphics Accelerator are:
- 1280 x 1024 maximum resolution up to 85 Hz
- 8-bit and 24-bit double-buffered color
- 24-bit Z-buffer
- 8-bit overlay buffer
- 8-bit window ID buffer
- 8-bit stencil buffer
- 8-bit double-buffered alpha
- 32 MB texture memory
- Eight 256-entry hardware color tables
- Separate gamma correction table
- Hardware accelerated lighting
- Increased subpixel addressing over previously supported adapters
- Face culling support
- OpenGL polygon offset support
- OpenGL polygon mode support
- OpenGL specular lighting support in hardware
- Trilinear Texture Mapping
- 3D texture mapping
- Video support
- Point sampling and bilinear scaling
- Color space conversion
- Stereo support
- 12-bit RGB on a per window basis
- 1024 x 768 at 120 Hz
- Preserved aspect ratio
- Attributes provided: Graphics capability
- Attributes required: 1 PCI slot (See slot restrictions)
- For 7043-270: (#2825)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2826) POWER GXT4000P Graphics Accelerator
(No Longer Available as of December 6, 2002)
IBM POWER GXT4000P -- Entry, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Performance improvements over previous IBM graphics products
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
The GXT4000P Graphics Accelerator is a 64-bit entry 3D PCI Graphics adapter for the RS/6000 Models 7044-170 and 7044-270 and 7043-270 upgrade. The graphics subsystems, matched to the POWER 3 II-based workstations provide excellent functionality and performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 1920 x 1200
- 24-Bit Quad Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil/Clip Planes
- 8 windows ID bits
- 1 Rectangular Scissor region
- 5 HW Rectangular Clippers
- Texture Mapping
- up to 108MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- Texture color table
- Video Support
- Bilinear Scaling
- Color Space Conversion
- 4 Hardware Color Maps
- Gamma corrected AA lines
- HW occlusion culling
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support
- Resolution Supported: 8/24 bit (up to 2048 X 1536 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX 4.3.3
The GXT4000P is packaged on a standard single-slot PCI card. The PCI interface is 64-bit, up to 66 MHz and 3.3V. There are no options. It is supported on 7044 Models 170 and 270 (and the 7043 Model 270 upgrade).
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot 3.3V
- For 7043-270: (#2826)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3
- Initial Order/MES/Both/Supported: MES
(#2827) POWER GXT6000P Graphics Accelerator
(No Longer Available as of December 6, 2002)
IBM POWER GXT6000P -- Mid-range, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Geometry Accelerator on-board delivering highest ever IBM 3D graphics performance
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
The GXT6000P Graphics Accelerator is a 64-bit mid-range 3D PCI Graphics adapter for the RS/6000 Models 7044-170 and 7044-270 (and 7043-270 upgrade). The graphics subsystems, matched to the POWER 3 II-based workstations provide excellent functionality and performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 1920 x 1200
- 24-Bit Quad Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil/Clip Planes
- 8 windows ID bits
- 1 Rectangular Scissor region
- 5 HW Rectangular Clippers
- Texture Mapping
- up to 108MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- Texture color table
- Video Support
- Bilinear Scaling
- Color Space Conversion
- 4 Hardware Color Maps
- Gamma corrected AA lines
- HW occlusion culling
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support
- Resolution Supported: 8/24 bit (up to 2048 X 1536 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX 4.3.3
The GXT6000P is packaged on a standard single-slot PCI card. The PCI interface is 64-bit, up to 66 MHz and 3.3V. There are no options. It is supported on 7044 Model 170 and 270 (and the 7043 Model 270 upgrade).
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 64 or 32-bit slot 3.3V
- For 7043-270: (#2827)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3
- Initial Order/MES/Both/Supported: MES
(#2830) POWER GXT130P Graphics Accelerator
(No Longer Available as of April 30, 2003)
The POWER GXT130P is a versatile, low-priced graphics accelerator for RS/6000 PCI-bus systems. It is a half-length PCI card with a standard 15-pin DIN output connector and can support multisync monitors with at least a 64 KHz horizontal scan capability. or DDC-2B-compliant multisync monitors with at least a 38 KHz horizontal scan capability.
Ultimedia Services 2.2.0 and Xlib APIs are supported on AIX Version 4.2.1 or 4.3.
For MES orders of the GXT130P Graphics Accelerator:
- If your operating system was installed with AIX Version 4.2.1 before
October 1998, you must apply the following AIX Version 4.2.1 refresh for
October 1998 (this includes boot media and the additional device drivers
required that are included with the feature.)
- AIX Version 4.2.1 LCD4-0238-02
- If you have AIX Version 4.2.1 (LCD4-0238-00 or LCD4-0238-01), update to LCD4-0238-02 to run this program.
- Attributes provided: Graphics adapter
- Attributes required: 1 PCI slot
- For 7043-270: (#2830)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2838) POWER GXT120P Graphics Adapter - PCI
The POWER GXT120P provides video acceleration features such as scaling and color space conversion. The GXT120P can support multisync monitors with at least a 64KHz horizontal scan capability or DDC-2B-compliant multisync monitors with at least a 38KHz horizontal scan capability.
Ultimedia Services 2.2.0 and Xlib APIs are supported on AIX Version 4.2.1 or 4.3.
- Attributes provided: Graphics adapter
- Attributes required: 1 PCI slot
- For 7043-270: (#2838)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#2841) POWER GXT300P Graphics Accelerator
(No Longer Available as of April 26, 2002)
The POWER GXT300P Graphics Accelerator is for mid-range 2D design and visualization solutions. The GXT300P Graphics Accelerator is a short PCI adapter card requiring one PCI slot. It supports display resolutions up to 1600 x 1200 (maximum) at up to 85 Hz.
The GXT300P complies with the ISO 9241 Part 3 and Part 8 standard, and allows up to 16.7 million simultaneous colors. For XWindows, the GXT300P offers support for 8-bit and 24-bit double buffered color.
Characteristics:
- 1600 x 1200 maximum resolution up to 85 Hz
- 8-bit and 24-bit double-buffered color
- 8-bit overlay buffer
- 4-bit window ID buffer
- Four 256-entry hardware color tables
- Separate gamma correction table
- Video support
- Attributes provided: 2D graphics capability
- Attributes required: 1 PCI slot
- For 7043-270: (#2841)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2842) - POWER GXT4500P Graphics Accelerator
IBM POWER GXT4500P -- Entry, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
The GXT4500P Graphics Accelerator is a 64-bit entry 3D PCI Graphics adapter. The graphics subsystems provide excellent functionality and performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Scissor Registers
- 5 HW Rectangular Clippers
- Texture Mapping
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support
- Resolutions Supported: 8/16/24 bit (up to 2048 x 1536 @ 60Hz)
- DDC2B support
- ISO 9241-3 and ISO 13406-2 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1, or later
The GXT4500P is packaged on a standard single-slot PCI card. The PCI interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 7043-270: (#2842)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: MES
(#2843) - POWER GXT6500P Graphics Accelerator
IBM POWER GXT6500P -- Mid-range, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Geometry Accelerator on-board delivering highest ever IBM 3D graphics performance
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
The GXT6500P Graphics Accelerator is a 64-bit mid-range 3D PCI Graphics adapter. The graphics subsystems provide excellent functionality and performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- LifeScience Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Texture Mapping
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
- Full OpenGL, graPHIGS Geometry Accelerator
API support - X11, graPHIGS, OpenGL 1.2.1
Monitor Support
- Resolutions Supported: 8/24 bit (up to 2048 x 1536 @ 60Hz)
- Digital Monitor Support (up to 1600 x 1200 @ 60Hz)
- DDC2B support
- ISO 9241-3 and ISO 13406-2 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1. or later
The GXT6500P is packaged on a standard single-slot PCI card. The PCI interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 7043-270: (#2843)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: MES
(#2849) POWER GXT135P Graphics Accelerator with Digital Support
(No Longer Available as of November 27, 2009)
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 7043-270: (#2849)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 0)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#2851) POWER GXT250P Graphics Adapter - PCI
The IBM POWER GXT250P Graphics Adapter is an 8-bit, single buffer adapter (8-bit double buffer for 1024x768) that attaches to the standard PCI bus interface. It is designed for 2D applications including: desktop publishing, X-window applications, 2D mechanical drafting, CASE, chemical and biological applications, and electrical CAD.
Characteristics of the POWER GXT250P are:
- 64-bit or 32-bit PCI bus interface
- 3MB of VRAM
- Hardware acceleration for points, lines, triangles, rectangles, quadrilaterals, bit block transfer
- Pattern fill support
- Rectangular and non-rectangular clipping
- Up to 256 colors from a palette of 16.7 million
- Hardware window support (4 Window ID Bits)
- Dithering
- Three hardware color maps
- Monitor resolution support
- AIX 4.1.5: 1024 x 768, 1280 x 1024
- 60 to 85 Hz Monitor refresh rates
- Capable of driving monitors that meet ISO 9241 Part 3 Specification
- Attributes provided: Graphics Capability
- Attributes required: PCI Slot (short)
- For 7043-270: (#2851)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#2852) POWER GXT255P Graphics Adapter - PCI
The IBM POWER GXT255P Graphics Adapter is an 8, 16, or 24-bit, single- buffer adapter (8-bit double-buffer up to 1280x1024) that attaches to the standard PCI bus interface. It is designed for 2D applications including: desktop publishing, X-window applications, 2D mechanical drafting, CASE, chemical and biological applications, and electrical CAD.
Characteristics of the POWER GXT255P are:
- 64-bit or 32-bit PCI bus interface
- 8MB of VRAM
- Hardware acceleration for points, lines, triangles, rectangles, quadrilaterals, bit block transfer
- Pattern fill support
- Rectangular and Non-rectangular clipping
- Up to 16.7 million colors from a palette of 16.7 million
- Hardware window support (4 Window ID Bits)
- Dithering
- Three hardware color maps
- Monitor resolution support
- AIX 4.1.5: 1024 x 768, 1280 x 1024
- 60 to 85Hz Monitor refresh rates
- Capable of driving monitors that meet ISO 9241 Part 3 Specification
- Attributes provided: Graphics Capability
- Attributes required: PCI Slot (short)
- For 7043-270: (#2852)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#2861) ARTIC960Hx 4-Port EIA-232 Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: 4-port EIA-232 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7043-270: (#2861)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #2947 adapter.
(#2862) ARTIC960Hx 4-Port RS-449 Cable
(No Longer Available as of July 31, 2001)
- Attributes provided: 4-port RS-449 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7043-270: (#2862)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #2947.
(#2863) ARTIC960Hx 4-Port X.21 Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: 4-port X.21 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7043-270: (#2863)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #2947.
(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: 4-port X.35 (DTE) cable for (#2947)
- Attributes required: One #2947 adapter
- For 7043-270: (#2864)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #2947.
(#2865) ARTIC960Hx 4-Port EIA-530 Cable
(No Longer Available as of December 3, 2001)
4-port EIA-5 cable for (#2947).
- Attributes provided: 4-port EIA-530 cable for #2947
- Attributes required: One #2947 adapter
- For 7043-270: (#2865)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #2947.
(#2871) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 T1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7043-270: (#2871)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310.
(#2872) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 T1 Trunk lines.
- Attributes required: One (#6310) adapter and (#2871) cable
- For 7043-270: (#2872)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310 and #2871. Maximum of 4 per adapter.
(#2873) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7043-270: (#2873)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310.
(#2874) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter and ##2873) cable
- For 7043-270: (#2874)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310 and #2873. Maximum of 4 per adapter.
(#2875) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, 1.8M 4-Port Cable
(No Longer Available as of December 27, 2002)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7043-270: (#2875)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310.
(#2876) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Ungrounded, 1.8M 4-Port Cable
(No Longer Available as of December 27, 2002)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7043-270: (#2876)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Requires #6310.
(#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
(No Longer Available as of November 26, 2010)
This cable provides the capability to interconnect adapters that provide H.100 bus connectors. This 4-position cable should be used when 4 or less adapters with H.100 connectors will be interconnected. When more than 4 and less than or equal to 8 adapters will be connected, the H.100 Bus 8-Drop Cable (#4353) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: Two to Four H.100 adapters
- For 7043-270: (#2877)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2878) IBM ARTIC960RxD Quad DTA, SC Bus, 5-Drop Cable
(No Longer Available as of December 27, 2002)
- Attributes provided: SC bus connection between adapters
- Attributes required: Two to Five SC bus adapters
- For 7043-270: (#2878)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2879) IBM ARTIC960RxD Quad DTA, Four H.100 to SC bus Converter Ca ble
(No Longer Available as of April 26, 2002)
- Attributes provided: Four-H.100 to SC bus conversion. Cable can attach one to four H.100 adapters to SC bus adapters. (#2878) must be used with this converter cable to attach the SC bus adapters.
- Attributes required: One to four H.100 adapters, one #2878 SC Bus Cable, and one SC bus adapter
- For 7043-270: (#2879)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2900) 4.5GB Ultra-SCSI 16-bit Disk Drive
The 4.5GB Ultra-SCSI 16-bit Disk Drive is a high-performance disk
drive that provides 4.5GB capacity that supports the Ultra SCSI interface
speed of 40MB/s.
Note: Requires Ultra-SCSI adapter #6206 to operate at 40MB/s.
- Form Factor ........... 1-inch(25mm) high by 4.0-inch (102mm) wide
- Cable included ................... No
- External Interface ............... Ultra SCSI (16-bit, Single-Ended)
- Attachment Industry Spec ......... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- SCSI bus interface Speed ......... 40MB/s (max)
- Average Seek Time .................7.9 ms
- Average Latency .................. 4.17ms
- Rotational Speed ................. 7200 RPM
- Maximum Media Data Transfer Rate . 13.7 MB/sec
Note: *Average seek times and maximum data transfer rate are equal to or better than noted.
Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX Version 4.2 or later.
- Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR #IX61149 for disks and diagnostics.
- Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For information on FixDist, refer to the following URL on the worldwide web:
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 half-high disk bay and 1 SCSI internal, single-ended, 16-bit address.
- For 7043-270: (#2900)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#2906) 9.1GB 10,000 RPM Ultra-SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of April 9, 2002)
The 9.1GB 10,000 RPM Ultra SCSI 16-bit 1-inch (25mm)Disk Drive provides 9.1GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 30.5 MBps
Limitation: These disks are supported by AIX Version 4.2.1, and AIX Version 4.3 or later.
- Attributes provided: The feature is delivered with a disk drive mounted in a plastic carrier
- Attributes required: One disk drive bay.
- For 7043-270: (#2906)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2908) 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
(No Longer Available as of May 21, 2001)
The 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive offers high- performance that provices 9.1GB of storage capacity and supports the industry Ultra-SCSI interface speed of 40MBps.
Note: Requires Ultra-SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: ........................ 1-inch (25mm)high by 4.0-inch (102mm) wide
- Cable included: ..................... No
- External Interface: ................. Ultra-SCSI (16-bit, Single Ended)
- Attachment Industry Spec: ........... SCSI-3 Fast 20/ANSISpec X3T10/1071D
- Average Seek Time: .................. 6.7 ms
- Average Latency ..................... 4.17 ms
- Rotational Speed .................... 7200 RPM
- Maximum Media Data Transfer Rate .... 22.4MBps
- Machines ordered with AIX Version 4.1.3, 4.1.4, and 4.1.5 require the additional APAR IX61149, IX62529, and IX62576 for disks and diagnostics.
- Machines ordered with AIX Version 4.2.0 require the addition of APAR IX60676, IX62155, and IX62156.
Note: These APAR's can be obtained through FixDist or from the IBM Support Center. For information on Fix Dist, refer to the following URL on the World Wide Web:
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit address.
- For 7043-270: (#2908)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2909) 18.2 GB Ultra-SCSI 1" High (25mm) Disk Drive
(No Longer Available as of May 21, 2001)
The 18.2GB Ultra-SCSI 16-bit 1-inch (25 mm) High Disk Drive provides 18.2GB of storage capacity and supports the industry's Ultra-SCSI interface speed of 40 MBps.
Note: Requires Ultra-SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: ........................ 1-inch (25 mm) high by 4.0-inch (102 mm) wide
- Cable included: ..................... No
- External Interface: ................. Ultra-SCSI (16-bit, Single Ended)
- Attachment Industry Spec: ........... SCSI-3 Fast 20/ANSISpec X3T10/1071D
- Average Seek Time: .................. 6.7 ms
- Average Latency ..................... 4.17 ms
- Rotational Speed .................... 7200 rpm
- Maximum Media Data Transfer Rate .... 22.4 MBps
- Attributes provided: 18.2GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit address.
- For 7043-270: (#2909)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2920) IBM PCI Token-Ring Adapter
The IBM PCI Token-Ring Adapter is a high performance, 32 bit bus master, adapter designed to operate on selected RS/6000 models that incorporate the Peripheral Component Interconnect (PCI) bus interface. Featuring an enhanced system interface for higher throughput and lower system utilization, coupled with RJ-45 and DB9 connectors, this adapter is better equipped to handle the LAN environment requirements of today's servers and high-end workstations running I/O intensive applications on the network. Additional features and support include:
- Operation at either 16 Mbps or 4 Mbps over unshielded twisted pair (UTP) or shielded twisted pair (STP) via the RJ-45 and the 9-pin D-shell connectors.
- Automatic ring speed detection. To simplify installation and reduce network down time, the adapter automatically determines the ring speed and mode of an operating network and configures itself accordingly.
- External status light-emitting diodes (LEDs), providing visual indication of adapter and ring status without disrupting operation.
- Full duplex LAN operation for simultaneously transmitting and receiving data.
- The system may be booted from the IBM PCI Token-Ring Adapter.
- Attributes provided: Token Ring Interface
- Attributes required: 1 PCI Slot
- For 7043-270: (#2920)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#2934) Asynchronous Terminal/Printer Cable EIA-232
(No longer available as of December 31, 2020)
The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal interposer) and replaces this method of printer/terminal attachment.
This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is is used in conjunction with :
- FC 2931 (8-port Async Adapter EIA232, ISA bus)
- FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
- Attributes provided: EIA232 device attachment capability
- Attributes required: Any RS/6000 Asynchronous port
- For 7043-270: (#2934)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2936) Asynchronous Cable EIA-232/V.24
(No longer available as of December 31, 2020)
Used to attach a modem to the standard I/O ports with the 10-pin to 25-pin converter cable (shipped with the system), 8-port Cable Assembly, 16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The cable is 3 meters (9.8 feet) in length.
- Attributes provided: Modem attachment to async or serial port
- Attributes required: Async or serial port
- For 7043-270: (#2936)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
(No Longer Available as of November 27, 2009)
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All eight ports are software programmable to support either EIA-232E or RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 7043-270: (#2943)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2944) 128-Port Asynchronous Controller, PCI bus
(No Longer Available as of March 31, 2006)
The 128-Port Async Adapter subsystem provides attachment for a high concentration of asynchronous lines (up to 128) from a single PCI bus slot. This gives the system the ability to serve a large number of user of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to each synchronous channel.
The new RANs being announced provide 16 EIA-232 (#8137) or 16 RS-422 (#8138) ports yielding a total of 128-ports in a maximum configuration.
Existing RANs feature numbers 8130, 8134, or 8136 can also be used with this adapter. If these RANs are connected the synchronous channel the data rate drops down to 1.2 Mbps. For the best results keep the previous and new RAN's on separate synchronous channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 7043-270: (#2944)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2945) Asynchronous Terminal Cable - EIA-422A
(No Longer Available as of July 31, 2001)
Provides a 20 meter (66 feet) interface cable for attaching an EIA-422A Terminal to to an Asynchronous Adapter
- Attributes provided: EIA-422A attachment capability
- Attributes required: Asynchronous Adapter EIA-422A
- For 7043-270: (#2945)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2946) Turboways 622 Mbps PCI MMF ATM Adapter
(No Longer Available as of December 17, 2004)
The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal PCI Adapter. This adapter provides direct access to the ATM network at a dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI MMF ATM Adapter is a short form-factor adapter that interfaces to the system via the PCI bus and connects to the 622 Mbps ATM network via dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for packet memory. This ATM adapter also provides a hardware assist for TCP checksum which can provide a performance improvement by minimizing the host CPU cycles.
- Attributes provided: One full-duplex connection to 622 ATM network
- Attributes required: One available PCI card slot
- For 7043-270: (#2946)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance Package or later support.
- Initial Order/MES/Both/Supported: MES
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one-
slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of:
EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of
up 2.0M bps. Software support is provided by ARTIC960 Support for AIX,
Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC
and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that
provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
- Attributes provided: One to four WAN connections at up to 2.0Mbps
- Attributes required: One full length 32-bit PCI slot, AIX Version 4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5, 4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
- For 7043-270: (#2947)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2948) IBM ARTIC960Hx 4-Port T1/E1 PCI Adapter
The IBM ARTIC960Hx 4-Port T1/E1 PCI Adapter (#2948) is a one slot, standard length,32 bit PCI card. The adapter provides 4-Ports of Channelized T1/E1. The adapter also provides SCbus external TDM interface and switch. Software support is provided by ARTIC960 Support for AIX, Developer's Kit.
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
- Attributes provided: Connection for one to four T1/E1 Trunks
- Attributes required: One full length 32 bit PCI slot
- For 7043-270: (#2948)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#2951) Cable, V.24 / EIA-232
(No Longer Available as of December 30, 2005)
V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.
- For 7043-270: (#2951)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2952) Cable, V.35
(No Longer Available as of December 30, 2005)
V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.
- For 7043-270: (#2952)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2953) Cable, V.36 / EIA-499
(No Longer Available as of December 30, 2005)
V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.
- For 7043-270: (#2953)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2954) Cable, X.21
(No Longer Available as of December 30, 2005)
X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.
- For 7043-270: (#2954)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#2962) 2-Port Multiprotocol PCI Adapter
(No Longer Available as of December 30, 2005)
This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems.
This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926).
2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954)
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952)
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
- CCITT V.10 Electrical
- CCITT V.11 Electrical
- Attributes provided: Two high speed WAN connections
- Attributes required: One PCI slot
- For 7043-270: (#2962)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2963) TURBOWAYS 155 PCI UTP ATM Adapter
(No Longer Available as of December 3, 2001)
Provides dedicated, 155 Mbps full-duplex connection to ATM networks over either permanent virtual circuits (PVC) or switched virtual circuits (SVC). This adapter enables TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair (UTP). It also supports communication with devices located on an ATM network or bridged to a token-ring, Ethernet, or other LAN.
- Attributes provided: One ATM 155 UTP connector
- Attributes required: One PCI slot
- For 7043-270: (#2963)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2968) IBM 10/100 Mbps Ethernet PCI Adapter
(No Longer Available as of December 3, 2001)
Provides a 10 Mbps (10BaseT) or 100 Mbps (100BaseTx) full-duplex Ethernet LAN connection. The adapter supports 32-bit bus master PCI connection to the host system for enhanced data throughput and lower bus utilization. The adapter supports Category-5 Unshielded Twisted Pair.
- Attributes provided: One 10/100 Mbps Ethernet connector
- Attributes required: One PCI slot
- For 7043-270: (#2968)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2969) Gigabit Ethernet - SX PCI Adapter
(No Longer Available as of December 12, 2003)
Provide a 1 Gbps (1000Base-SX) full-duplex Ethernet LAN connection.
An additional function called 'LARGE SEND' is now available. This function offloads the TCP resegmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. This function is only available on AIX version 5.1 with AIX Update CD LCD4-1103-01 or later.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet switch.
- Attributes required: Available 64 bit PCI slot, AIX 4.3.2 or later is required for Hardware Checksum and Jumbo Frame support.
- For 7043-270: (#2969)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2975) 10/100/1000 Base-T Ethernet PCI Adapter
(No Longer Available as of December 12, 2003)
10/100/1000 Base-T Ethernet PCI Adapter is a Full Duplex Gigabit
Ethernet adapter designed with highly integrated components to optimize
cost and performance. The adapter interfaces to the system via the PCI
bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted
Pair (UTP) cable for distances of up to 100m. The 10/100/1000 Base-T
Ethernet PCI Adapter supports jumbo frames (up to 9000 bytes) for full
duplex Fast & Gigabit Ethernet.
Note: For optimum performance, adapter should be placed in a 64 bit PCI
card slot.
An additional function called 'LARGE SEND' is now available. This function offloads the TCP resegmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. This function is only available on AIX version 5.1 with AIX Update CD LCD4-1103-01 or later.
Limitation:
- AIX's Network Install Manager (NIM) boot is not supported with this adapter.
- The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.
- Attributes provided: One full-duplex 1000Base-T UTP connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI card slot
- For 7043-270: (#2975)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance Package or later support.
- Initial Order/MES/Both/Supported: MES
(#2988) TURBOWAYS 155 PCI MMF ATM Adapter
(No Longer Available as of December 3, 2001)
Also provides direct access to ATM networks. The TURBOWAYS 155 PCI
MMF ATM Adapter provides dedicated 155Mbps full-duplex
connection using PVCs or SVCs and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on
an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
Note: Systems ordered with AIX preinstalled will have the device drivers
installed on the hard disk drive.
TURBOWAYS 155 PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
- Attributes provided: One ATM 155Mbps connection
- Attributes required: One PCI slot
- For 7043-270: (#2988)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#2998) TURBOWAYS 25 ATM PCI Adapter
(No Longer Available as of October 17, 2001)
For direct access to ATM networks, the &atm25 provides dedicated
25Mbps full-duplex connection using PVCs or SVCs and enables
TCP/IP to run over an ATM network. The adapter also supports
communication with devices located on an ATM network or bridged to a
Token-Ring, Ethernet, or other LAN.
Note: AIX drivers are shipped on diskette with the hardware feature.
Systems ordered with AIX preinstalled will have the device drivers
installed on the hard disk drive.
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
- Attributes provided: One ATM 25Mbps connection
- Attributes required: One PCI slot
- For 7043-270: (#2998)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3027) 9.1GB 10,000 RPM Ultra-SCSI Disk Drive
(No Longer Available as of April 9, 2002)
The 9.1GB 10,000 RPM Ultra SCSI Disk Drive provides 9.1GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 30.5 MBps
Limitation: These disks are supported by AIX Version 4.2.1, and AIX Version 4.3 or later.
- Attributes provided: The feature is delivered with a disk drive mounted in a plastic carrier
- Attributes required: One disk drive bay.
- For 7043-270: (#3027)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3028) 4.5GB Ultra-SCSI 16-bit Hot Swap Disk Drive
The 4.5GB Ultra SCSI 16-bit Enhanced Disk Drive is a high-performance
disk drive that provides 4.5GB capacity that supports the Ultra SCSI
interface speed of 40MB/s.
Note: Requires Ultra SCSI adapter to operate at 40MB/s.
- Form Factor .........1-inch (25mm)high by 4.0-inch (102mm) wide
- Cable included ................. No
- External Interface ............. Ultra SCSI (16-bit, Single-Ended)
- Attachment Industry Spec ....... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- SCSI bus interface Speed ....... 40MB/s (max)
- Average Seek Time .............. 7.9 ms
- Average Latency ................ 4.17ms
- Rotational Speed ............... 7200 RPM
- Maximum Media Data Transfer Rate ... 13.7 MB/sec
Note: Average seek times and maximum data transfer rate are equal to or better than noted.
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 half-high disk bay and 1 SCSI internal, single-ended, 16-bit address.
- For 7043-270: (#3028)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#3029) 9.1GB Ultra-SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of May 21, 2001)
The 9.1GB Ultra SCSI 16-bit Enhanced Disk Drive offers high-
performance that provides 9.1GB of storage capacity and supports the
industry Ultra SCSI interface speed of 40MBps.
Note: Requires Ultra SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: ........................ 1-inch (25mm)high by 4.0-inch (102mm) wide
- Cable included: ..................... No
- External Interface: ................. Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: ........... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- Average Seek Time: .................. 6.7 ms
- Average Latency ..................... 4.17 ms
- Rotational Speed .................... 7200 RPM
- Maximum Media Data Transfer Rate .... 22.4MBps
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit address.
- For 7043-270: (#3029)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3102) 18.2 GB 10,000 RPM Ultra SCSI Disk Drive
(No Longer Available as of August 8, 2003)
The 18.2 GB 10,000 RPM Ultra SCSI Disk Drive provides 18.2 GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
- Attributes provided: 18.2 GB storage capacity
- Attributes required: One disk drive bay
- For 7043-270: (#3102)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3103) 18.2GB Ultra-SCSI Enhanced Disk Drive
(No Longer Available as of May 21, 2001)
The 18.2GB Ultra-SCSI 16-bit Enhanced High Disk Drive provides 18.2GB of storage capacity and supports the industry's Ultra-SCSI interface speed of 40 MBps.
Note: Requires Ultra-SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: ........................ 1-inch (25 mm) high by 4.0-inch (102 mm) wide
- Cable included: ..................... No
- External Interface: ................. Ultra-SCSI (16-bit, Single Ended)
- Attachment Industry Spec: ........... SCSI-3 Fast 20/ANSISpec X3T10/1071D
- Average Seek Time: .................. 6.7 ms
- Average Latency ..................... 4.17 ms
- Rotational Speed .................... 7200 rpm
- Maximum Media Data Transfer Rate .... 22.4 MBps
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit address.
- For 7043-270: (#3103)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3110) 18.2GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of August 8, 2003)
The 18.2GB 10,000 RPM Ultra SCSI 16-bit 1-inch (25mm) high disk drive provides 18.2GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25mm) high
- Cable Included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
- Attributes provided: 18.2 GB of disk storage mounted in a carrier
- Attributes required: One disk drive bay
- For 7043-270: (#3110)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3119) 36.4GB 10,000 RPM Ultra SCSI Disk Drive
(No Longer Available as of December 10, 2004)
The 36.4GB 10,000 RPM Ultra SCSI Disk Drive provides 36.4GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI Adapter for the drive to run at 40 MBps.
- Attributes provided: 36.4GB of disk storage
- Attributes required: One disk drive bay.
- For 7043-270: (#3119)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3118) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive
(No Longer Available as of December 10, 2004)
The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI-3 fast 80
- Average Seek Time: 5.38 ms (based on four READS to one WRITE)
- Average Latency: 3.00 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 83.88 MBps
Note: This disk drive requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane for the drive to run at 160 MBps. Any and all other SCSI device(s) on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) for this disk drive to run at 160 MBps.
- Attributes provided: 73.4 GB of disk storage.
- Attributes required: One disk drive bay.
- For 7043-270: (#3118)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#3128) 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of December 10, 2004)
The 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive provides 36.4GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI Adapter for the drive to run at 40 MBps.
- Attributes provided: 36.4GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7043-270: (#3128)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#3124) Serial to Serial Port Cable for Drawer/Drawer
(No longer available as of December 31, 2020)
This cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted within the same rack.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#3124)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#3125) Serial to Serial Port Cable for Rack/Rack
(No longer available as of December 31, 2020)
This cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted in separate racks.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#3125)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#3163) 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of December 10, 2004)
The 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive provides 73.4 GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20
- Average Seek Time: 5.38 ms (based on four READS to one WRITE)
- Average Latency: 3.00 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 83.88 MBps
Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI adapter for the drive to run at 40 MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7043-270: (#3163)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#3620) IBM P72 Color Monitor
The P72 monitor has the following general characteristics:
- 17-inch Trinitron (R) CRT with a viewable image size of 16.0 inches (407 mm), incorporating a 0.25 mm aperture grille for bright, high- definition images.
- A maximum horizontal frequency of 85 KHz provides reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced with a maximum addressability of 1280 x 1024 pels.
- Attributes provided: Color monitor
- Attributes required: Graphics adapter
- For 7043-270: (#3620)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Note: Maximum of 1 #3620 per installed graphics adapter.
(#3621) IBM P92 Color Monitor
The P92 monitor has the following general characteristics:
- 19-inch Trinitron (R) CRT with a viewable image size of 17.9 inches (456 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.
- A maximum horizontal frequency of 94 KHz provides reduced flicker operation at an optimum 1280 x 1024 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels.
- Attributes provided: Color monitor
- Attributes required: Graphics adapter
- For 7043-270: (#3621)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Note: Maximum of 1 #3621 per installed graphics adapter.
(#3622) IBM P202 Color Monitor
The P202 monitor has the following general characteristics:
- 21-inch Trinitron (R) CRT with a viewable image size of 19.8 inches (503 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.
- A maximum horizontal frequency of 107 KHz provides reduced flicker operation at an optimum 1600 x 1200 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels.
- Attributes provided: Color monitor
- Attributes required: Graphics adapter
- For 7043-270: (#3622)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Note: Maximum of 1 #3622 per installed graphics adapter.
(#3623) IBM P72 Color Monitor, Business Black, Captured Cable
The P72 monitor has the following general characteristics:
- 17-inch Trinitron (R) CRT with a viewable image size of 16.0 inches (407 mm), incorporating a 0.25 mm aperture grille for bright, high- definition images.
- A maximum horizontal frequency of 85 KHz provides reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced with a maximum addressability of 1280 x 1024 pels.
- Attributes provided: Color monitor
- Attributes required: Graphics adapter
- For 7043-270: (#3623)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Note: Maximum of 1 #3623 per installed graphics adapter.
(#3625) IBM P92 Color Monitor, Business Black, and Cable
The P92 monitor has the following general characteristics:
- 19-inch Trinitron (R) CRT with a viewable image size of 17.9 inches (456 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.
- A maximum horizontal frequency of 94 KHz provides reduced flicker operation at an optimum 1280 x 1024 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels.
- Attributes provided: Color monitor
- Attributes required: Graphics adapter
- For 7043-270: (#3625)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Note: Maximum of 1 #3625 per installed graphics adapter.
(#3626) IBM P202 Color Monitor, Business Black, and Cable
The P202 monitor has the following general characteristics:
- 21-inch Trinitron (R) CRT with a viewable image size of 19.8 inches (503 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.
- A maximum horizontal frequency of 107 KHz provides reduced flicker operation at an optimum 1600 x 1200 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels.
- Attributes provided: Color monitor
- Attributes required: Graphics adapter
- For 7043-270: (#3626)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Note: Maximum of 1 #3626 per installed graphics adapter.
(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable
(No Longer Available as of July 25, 2003)
The P76/P77 monitor has the following general characteristics:
- Business Black color
- 17-inch Flat Trinitron (R) CRT with a viewable image size of 406 mm (16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced, with a maximum addressability of 1600 x 1200 pels at 70Hz.
Note: The P76 and P77 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3627)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #3627 for each installed graphics adapter.
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable
(No Longer Available as of February 27, 2004)
The P260/P275 monitor has the following general characteristics:
- Business Black color
- 21-inch Flat Trinitron (R) CRT with a viewable image size of 503 mm (19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.
Note: The P260 and P275 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3628)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #3628 for each installed graphics adapter.
(#3629) IBM P76/P77 Color Monitor, Pearl White, Captured Cable
(No Longer Available as of December 31, 2002)
The P76/P77 monitor has the following general characters:
- Pearl White Color
- 17-inch Flat Trinitron(R) CRT with a viewable image size of 406 mm (16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum 1024 x
768 pels at up to 85 Hz non-interlaced, with a maximum addressability of
1600 x 1200 pels at 70 Hz.
Note: The P76 and P77 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3629)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #3629 for each installed graphics adapter.
(#3630) IBM P260/P275 Color Monitor, Pearl White, and Cable
(No Longer Available as of December 31, 2002)
The P260/P275 monitor has the following general characters:
- Pearl White Color
- 21-inch Flat Trinitron(R) CRT with a viewable image size of 503 mm (19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for high-definition images.
- Designed to provide reduced flicker operation at an optimum
addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.
Note: The P260 and P275 monitors are functionally equivalent. - Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3630)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #3630 for each installed graphics adapter.
(#3635) - T210 Flat-Panel Monitor
(No Longer Available as of February 18, 2003)
The T210 flat-panel monitor has the following general characteristics:
- Business Black color
- 21-inch TFT LCD digital screen with a viewable image size of 528 mm (20.8 inches) measured diagonally, incorporating a 0.207 mm pixel pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of 2048 x 1536 pels at 60Hz.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3635)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3636) L200P Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The L200p flat-panel monitor has the following general characteristics:
- Business Black color
- 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm (20.1 inches) measured diagonally, incorporating a 0.255 mm pixel pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of 1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in digital mode.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
Note: Requires #2848, #2842, or #2843 be installed in the system. - For 7043-270: (#3636)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable
(No Longer Available as of June 16, 2006)
The T541H and the L150p monitors have the following general characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297 mm pixel pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of 1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 7043-270: (#3637)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
(No Longer Available as of June 24, 2005)
The IBM C220p monitor has the following general characteristics:
- Business Black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508 mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and maximum supported addressability of 1600 x 1200 pels at up to 85 Hz (Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3638)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#3639) IBM ThinkVision L170p Flat Panel Monitor
(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following general characteristics:
- Business color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm pixel pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3639)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0 )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
Note: Maximum of 1 #3639 for each installed graphics adapter.
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The IBM ThinkVision L171p LCD flat-panel monitor has the following general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.280mm pixel pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
- Contrast ratio: 500:1 (minimal) 700:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3640)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#3642) - ThinkVision L191P Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The ThinkVision L191p LCD flat-panel monitor has the following general characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294mm pixel pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7043-270: (#3642)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3752) Service Package
(No Longer Available as of January 7, 2011)
This kit contains service publications, wrap plugs, and diagnostic CD-ROM. It also includes Maintenance Analysis Procedures (MAPs) that are not common to other RS/6000 systems. The "Diagnostics Information for Multiple Bus Systems" contains information common to all multiple bus system units and is used primarily for problem isolation by a customer's service specialist trained on the unit being serviced.
These publications are intended to be used in the customer's enterprise by the customer's own service specialists, and not by IBM Service personnel.
Two wrap plugs are included for use in diagnostic testing of the following connections to the system unit:
- RS-232 serial I/O port
- parallel I/O port
This kit also contains system diagnostic CD-ROM, along with a test diskette, for use by the customer's service specialist (not by IBM Service personnel).
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#3752)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#3753) Options Library (hard copy)
This feature provides a hardcopy version of the options publications.
Also available via PUBORDER (SK2T-7452).
- Attributes provided: Hardcopy of options publications
- Attributes required: None
- For 7043-270: (#3753)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#4098) Memory Expansion Feature (16 POS)
(No Longer Available as of December 10, 2004)
This memory card has 16 DIMM slots. Memory features #4106, #4107, #4110, and #4119 may be plugged into the slots to provide up to 4 GB of system memory per #4098 card.
- Attributes provided: 16 DIMM slots supporting up to 4 GB of system memory
- Attributes required: one memory card slot
- For 7043-270: (#4098)
- Minimum required: 1
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#4107) 64MB(2X32MB) DIMMS, 200 pin 10NS SDRAM
(No Longer Available as of July 31, 2001)
Provides 64MB of system memory with two 32MB SDRAM DIMMs.
- Attributes provided: 64MB of system memory
- Attributes required: 2 empty memory DIMM positions.
- For 7043-270: (#4107)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#4110) 256MB(2X128MB) DIMMS, 200 pin 10NS SDRAM
(No Longer Available as of December 10, 2004)
Provides 256MB of system memory with two 128MB SDRAM DIMMs.
- Attributes provided: 256MB of system memory
- Attributes required: Two empty memory DIMM positions.
- For 7043-270: (#4110)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 8 #4110 per memory card #4098.
(#4119) 512MB (2X256MB) DIMMs, 200-pin 10NS SDRAM
(No Longer Available as of August 15, 2000)
Provides 512MB system memory with two 256MB DIMMS.
- Attributes provided: 512 MB System Memory
- Attributes required: Two empty memory DIMM positions.
- For 7043-270: (#4119)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 8 #4119 for each memory card #4098.
(#4120) 512MB (2x256MB)Memory DIMMS
(No Longer Available as of December 10, 2004)
Provides 512MB system memory with two 256MB DIMMs.
- Attributes provided: 512MB System Memory
- Attributes required: Two empty memory DIMM postions.
- For 7043-270: (#4120)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
Note: Maximum of 8 #4120 for each memory card #4098.
(#4121) 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM
(No Longer Available as of March 21, 2008)
Provides 1024MB of system memory with 2 512MB DIMMS.
- Attributes provided: 1024MB of system memory
- Attributes required: Two empty memory DIMM positions.
- For 7043-270: (#4121)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 8 #4121 for each memory card #4098.
(#4217) 6091 Attachment Cable
(No Longer Available as of July 31, 2001)
This display cable is required for attachment of an IBM 5081 or IBM 6091 display. The cable is 1.8 meters (6 ft) in length.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#4217)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 per IBM 5081 or IBM 6091 display.
(#4223) Ethernet 10Base2 Transceiver
(No Longer Available as of June 25, 2004)
The 10Base2 Ethernet transceiver is compatible with Ethernet/IEEE 802.3 transceiver specifications and 10 MBps Ethernet CSMA/CD operation, to provide a connection to thin Ethernet coaxial cable (10Base2). It is connected to a 15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts the signal to 10Base2. The medium connection is made through a BNC coaxial connector.
Features include:
- Selectable SQE signal via external toggle switch
- Power LED
- Dimensions: 2-7/8 inches x 2-1/8 inches
- Attributes provided: 1 Ethernet 10Base2 connection
- Attributes required: 1 Ethernet thick connection
- For 7043-270: (#4223)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#4224) Ethernet 10BaseT Transceiver
(No Longer Available as of July 31, 2001)
The Ethernet 10BaseT Transceiver provides the complete Attachment Unit Interface (AUI) to a twisted pair LAN connection. It is connected to a 15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts the signal to 10BaseT. The medium connection is made through an RJ-45 receptacle.
Features include:
- Selectable Link Test via external toggle switch
- Selectable SQE signal via internal jumper
- Five LEDs
- Transmit
- Receive/Link
- Collision
- Jabber
- Dimensions: 2 7/8" x 2 1/8"
- Attributes provided: 1 ethernet 10baseT connection
- Attributes required: 1 ethernet thick connection
- For 7043-270: (#4224)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#4235) 15 Pin-D Shell to 13W3 Display Cable
This cable attaches monitors with a 13W3 connector to a graphics adapter with a 15 Pin-D Shell connector.
- Attributes provided: Connection to display with a 13W3 connector ID Bits 1010
- Attributes required: Graphics adapter with 15 Pin-D Shell connector
- For 7043-270: (#4235)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Note: One #4235 per display.
(#4238) DDC 15 Pin to 13W3 Display Cable
(No Longer Available as of December 3, 2001)
This converter cable attaches displays with a 13W3 connector that either are DDC (Display Data Channel) capable or do not need ID bits to a graphics adapter with a 15-pin D-shell connector.
- Attributes provided: Connection between display and graphics adapter
- Attributes required: None
- For 7043-270: (#4238)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #4238 per display.
(#4239) 15-D Adapter to 3BNC ID Cable
(No Longer Available as of July 31, 2001)
This cable attaches displays with a 3BNC video connector to graphics adapters with a 15-pin D-shell connector.
- Attributes provided: 1 display cable
- Attributes required:1 display and 1 graphics adapter
- For 7043-270: (#4239)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #4239 per display.
(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
(No Longer Available as of March 31, 2018)
This cable is required when ordering an appropriately supported monitor and adapter with a 15-pin "D" shell connector.
- Attributes provided: 6-foot extension cable
- Attributes required: Supported monitor and adapter with a 15-pin "D" shell connector.
- For 7043-270: (#4242)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #4242 per display.
(#4361) 1-Way 375MHz POWER3-II Processor Card
(No Longer Available as of September 22, 2004)
1-way processor card with 375 MHz POWER3-II processor and 4 MB of L2 cache.
- Attributes provided: 1-way processor
- Attributes required: 1 processor card slot
- For 7043-270: (#4361)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#4362) 2-Way 375MHz POWER3-II Processor Card
(No Longer Available as of December 10, 2004)
2-way processor card with 375 MHz POWER3-II processor with 4 MB of L2 cache.
- Attributes provided: 2-way processor
- Attributes required: 1 processor card slot
- For 7043-270: (#4362)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#4365) 2-WAY 375MHz POWER3-II Processor Card (8MB L2/Processor)
(No Longer Available as of September 22, 2004)
2-way processor card with 375 MHz POWER3-II processor with 8 MB of L2 cache.
- Attributes provided: 2-way processor
- Attributes required: 1 processor card slot
- For 7043-270: (#4365)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
Note: Cannot be installed with #4361 or #4362.
(#4366) - 2-WAY 450MHz POWER3-II Processor Card (8MB L2/Processor)
(No Longer Available as of December 10, 2004)
2-way processor card with 450 MHz POWER3-II processor with 8 MB of L2 cache.
- Attributes provided: 2-way processor
- Attributes required: 1 processor card slot
- For 7043-270: (#4366)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: MES
Note: Cannot be installed with #4361, #4362, or #4365.
(#4951) IBM Four Port 10/100 Ethernet Adapter
(No Longer Available as of December 3, 2001)
IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter for RS/6000 is a single slot, long, 64-bit 33 MHz PCI adapter supporting 4 industry standard Ethernet 10Base-T or 100 Base-T interfaces either half or full duplex. Each port is provided with it's own RJ-45 connector for attachment to standard CAT-3/5 Unshielded Twisted Pair, UTP cable. The adapter is IEEE 802.3u compatible and provides full auto-negotiation for detecting speed and duplex capability across each port.
Network boot capability and Network Install Manager (NIM) capability are available using this adapter if no specific limitation is stated.
The IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) should be considered where maximum port density is required per I/O card slot. But, for high end systems, where card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions.
Below are some performance factors to consider when choosing the right adapter for your needs. These performance comparisons are based on all four ports of the IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) being active.
- With all four ports under full bandwidth conditions, a single IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) is expected to deliver up to 3 times the comparable performance of a single IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter (#2968).
- Under most conditions, each port of the IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) is expected to perform at greater than 50% the throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter (#2968).
Note: The resulting performance in your environment compared to the above may vary and depends upon the RS/6000 model, the I/O configuration, and associated workload of your applications.
- Attributes provided: 4 port of 10/100 Base-Tx Ethernet
- Attributes required: 1 PCI slot
- For 7043-270: (#4951)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3. or later
- Initial Order/MES/Both/Supported: MES
(#4958) PCI Cryptographic Coprocessor
(No Longer Available as of December 3, 2001)
The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter combining hardware and software to provide high performance secure hardware engines for secure internet transactions such as secure data exchange, verifying electronic signatures, bulk data encryption and decryption. Cyrptographic processes are performed within a tamper proof enclosure on the adapter that is designed to meet FIPS PUB 140-1 standard for commercial cryptographic devices at Level 3.
Security functions supported by the adapter includes:
- Data Encryption Standard (DES) (56 and 40 bit keys) encryption and decryption, with pre-and post-padding; the coprocessor uses both electronic and codebook (ECB) and cipher block chain (CBC) modes of encryption.
- Message Authentication (MAC) and financial PIN processing
- Triple DES encryption and decryption of general data
- Secure RSA key-pair generation
- RSA signature generation and signature verification
- Secure Hashing Algorithm (SHA-1) in hardware
- Hardware random number generation
- Secure data storage and retrieval
- Other non-cryptographic security utilities can be carried out using the onboard processor
IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from the http://www.ibm.com/security/cryptocards website:
- PKCS #11 Version 2.01, an implementation of the industry-standard API
- IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to web site http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page:
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements.
Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements:
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7043-270: (#4958)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX Version 4.3.3 with 4330-05 Recommended Maintenance Package or later.
- Initial Order/MES/Both/Supported: MES
(#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
(No Longer Available as of December 17, 2004)
The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155 Mbps full-duplex connection to ATM networks over either permanent virtual circuits (PVC) or switched virtual circuits (SVC). This adapter enables TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair (UTP). It also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
- Attributes provided: One ATM 155 UTP connector
- Attributes required: One PCI slot
- For 7043-270: (#4953)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
- Initial Order/MES/Both/Supported: MES
(#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
(No Longer Available as of March 31, 2006)
The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155 Mbps full-duplex connection using permanent virtual circuits (PVC) or switched virtual circuits (SVC) and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
This 155 Mbps PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
- Attributes provided: One ATM 155Mbps MMF connection
- Attributes required: One PCI slot
- For 7043-270: (#4957)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
- Initial Order/MES/Both/Supported: MES
(#4959) IBM Token-Ring PCI Adapter
(No Longer Available as of March 31, 2006)
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short, 32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half- duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into the ring, even when connected to speed-sensing hubs. This adapter will operate with either unshielded twisted pair (UTP) Cat. 5 cable with RJ-45 connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin D-shell connectors. The Token-Ring PCI Adapter PCI Adapter will provide network boot capability.
- Attributes provided:
- Attributes required: A single empty 32-bit PCI adapter slot.
- For 7043-270: (#4959)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#4960) IBM e-business Cryptographic Accelerator
(No Longer Available as of May 31, 2006)
The IBM e-business Cryptographic Accelerator is a short form factor PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure Web transaction, SSL operations is a key requirement. To do this, public-key cryptographic operations using SSL handshake protocol is employed. The IBM e-business Cryptographic Accelerator is a hardware cryptographic solution that off-loads this compute-intensive public-key cryptographic processing from the host.
The overall operation control, including command decoding, is
implemented in hardware and requires no on-card microprocessor subsystem.
As such, the adapter is a less expensive alternative to those who do not
need the high security of the on-card secure programming environment such
as is offered by the PCI Cryptographic Coprocessor(#4958), but do need
the high cryptographic performance that hardware acceleration provides by
offloading the host processor.
Note: The IBM e-business Cryptographic Accelerator is only supported by
the industry standard PKCS #11 application programming interface (API)
Version 2.01, and applications which interface to the PKCS #11 Support
Program.
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7043-270: (#4960)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-13 or later, AIX 5.1 with AIX Update CD LCD4-1103-00 or later.
(#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
(No Longer Available as of March 31, 2006)
IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long, 64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10 Base-T or 100 Base-T interfaces either half or full duplex. Each port is provided with it's own RJ-45 connector for attachment to standard CAT-3/5 Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u compatible and provides full auto-negotiation for detecting speed and duplex capability across each port. Network boot capability and Network Install Manager (NIM) capability are available using this adapter if no specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) should be considered where maximum port density is required per I/O card slot. But, for high-end systems, where card slots are not the limiting factor and maximum throughput is required, the IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the single port IBM 10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions. Below are some performance factors to consider when choosing the right adapter for your needs. These performance comparisons are based on all four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) being active.
- With all four ports under full bandwidth conditions, a single IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver up to three times the comparable performance of a single IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968).
- Under most conditions, each port of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to perform at greater than 50% the throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968).
Note: The resulting performance in your environment compared to the above may vary and depends upon the RS/6000 model, the I/O configuration, and associated workload of your applications.
- Attributes provided: 4 ports of 10/100 Base-Tx Ethernet
- Attributes required: 1 PCI slot
- For 7043-270: (#4961)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or later, AIX 5.1 or later
- Initial Order/MES/Both/Supported: MES
(#4962) - 10/100 Mbps Ethernet PCI Adapter II
(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports:
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates) and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.
- Half / Full Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 7043-270: (#4962)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
- Initial Order/MES/Both/Supported: MES
An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both of these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software.
(#4963) - PCI Cryptographic Coprocessor (FIPS-4)
(No Longer Available as of February 8, 2005)
The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter which combines hardware and software to provide a wide variety of security services. The PCI Cryptographic Coprocessor (FIPS-4) is a second generation adapter of the Cryptographic Coprocessor family that provides high performance secure hardware engines for secure Internet transactions such as transmitting data, verifying electronic signatures, bulk data encryption and decryption. In addition, the card is enclosed in a tamper proof enclosure to restrict access to on card resources, designed to FIPS 140-1 Level 4 standards.
Security functions supported by the adapter include:
- DES (Data Encryption Standard) (40 and 56 bit key) encryption and decryption, with pre-and post-padding; the coprocessor uses both ECB (electronic and codebook) and CBC (cipher block chain) modes of encryption.
- MAC (Message Authentication) generation and MAC verification services
- Triple DES (three key) encryption and decryption of eight-byte units
- Secure RSA key-pair generation
- RSA signature generation and signature verification at 18 signatures/sec at 2048 bits
- Hardware random number generation
- Secure data storage and retrieval
- Other non-cryptographic security utilities can be carried out using the onboard processor
As part of this adapter's physical security features, the following events will cause an adapter shutdown and secure data zeroization.
- Shipping/Storage Temperature less than -15C or greater than 95C
- Dead Battery (VBAT less than 2.4V)
- Supply Voltage greater than 3.3V/12V max
- Mesh Sensor opens/shorts detection
- X-ray exposure
IBM offers software to enable your use of the coprocessors. Two different approaches to cryptographic functions are offered for download from the http://www.ibm.com/security/cryptocards Web site:
- PKCS #11 Version 2.01, an implementation of the industry-standard API
- IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to Web site http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page:
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements.
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7043-270: (#4963)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: MES
(#4964) PCI Cryptographic Coprocessor
(No Longer Available as of May 31, 2006)
The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter combining hardware and software designed to provide high performance hardware engines for secure internet transactions such as data exchange, verifying electronic signatures, bulk data encryption and decryption. Cryptographic processes are performed within a tamper resistant enclosure on the adapter that is designed to meet FIPS PUB 140-1 standard for commercial cryptographic devices at Level 3.
Security functions supported by the adapter includes:
- Data Encryption Standard (DES) (56 and 40 bit keys) encryption and decryption, with pre- and post-padding; the coprocessor uses both electronic and codebook (ECB) and cipher block chain (CBC) modes of encryption.
- Message Authentication (MAC) and financial PIN processing
- Triple DES encryption and decryption of general data
- RSA key-pair generation
- RSA signature generation and signature verification
- Secure Hashing Algorithm (SHA-1) in hardware
- Hardware random number generation
- Protected data storage and retrieval
- Other non-cryptographic security utilities can be carried out using the onboard processor
IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from:
- PKCS #11 Version 2.01, an implementation of the industry-standard API
- IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to:
For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page:
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements.
Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements:
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7043-270: (#4964)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: AIX 4.3.3 with 4330-08 Maintenance
Package or 5.1 or higher.
For Linux informaion, refer to:
http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5001) Customer Service Specify
(No Longer Available as of November 27, 2009)
This feature code specifies that the system will receive special request services from the Center for Customer Services (CCS) in Rochester.
- Attributes provided: Customization
- Attributes required: None
- For 7043-270: (#5001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5-micron
Multi Mode Fiber (MMF) and 550m for 50.0-micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64-bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5-Micron Fiber Converter Cable (#2459) or LC-SC
50-Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7043-270: (#5700)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX 5.2 with the 12/2002 or later Update CD
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64-bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex (HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7043-270: (#5701)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX 5.2 with the 12/2002 or later Update CD
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
(No Longer Available as of May 31, 2017)
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.
A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex (HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7043-270: (#5706)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution. Note: For optimum
performance, the adapter should be placed in a 64 bit PCI-X card slot
whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7043-270: (#5707)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#6041) 3-Button Mouse
(For IBM, No Longer Available as of March 26, 2004)
The 3-Button Mouse is a dynamic tracking pointing device which utilizes Opto-mechanical technology. Resolution is 320 DPI. A 2.74 meter (9 ft) attachment cord is included.
- Attributes provided: Mouse capability
- Attributes required: 1 Mouse Port
- For 7043-270: (#6041)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology
(No longer available as of February 29, 2008)
The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses VXAtape** data cartridges and is compression capable, providing a capacity of up to 160 GB - a significant increase in capacity over the previous internal tape drives.
Characteristics:
- Capacity: 80 GB native mode, 160 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: uses VXAtape data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
- Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
- Compatability: 80 GB mode (Read/Write), 160 GB compression (Read/Write)
- Attributes provided: One 80/160 GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address
- For 7043-270: (#6120)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#6134) 60/150 GB 16-bit 8mm Internal Tape Drive
(No Longer Available as of March 31, 2005)
The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch half-high, 16-bit tape drive. This drive provides a high capacity tape drive for save/restore and archiving functions. This tape drive uses IBM 8mm data cartridges and is compression capable, providing a capacity of up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm internal tape drive.
Characteristics:
- Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge with Smart Clean Technology
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical) Compression M
- Interface: SCSI-2 16-bit Low Voltage Differential(LVD) / Single-ended (SE) Asynchronous/Synchronous
- Compatibility: See the following Technical Support Web page (8mm Tape Interchange Information section) for compatability information:
- Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive
- Attributes required: One 1.6-inch(41mm) half-high media bay and one SCSI-2 internal 16-bit address
- For 7043-270: (#6134)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later, AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#6156) 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
(No Longer Available as of December 6, 2002)
This feature consists of a 5.25-inch half-high, single-ended, 16-bit tape drive. This drive provides a high capacity tape drive for save/restore and archiving functions. This tape drive uses IBM 8mm data cartridges and is compression capable, providing a capacity of up to 40 GB -- a 400% increase over the previous 5/10 GB 8mm internal tape drive. (Black bezel)
Characteristics:
- Capacity: 20.0 GB Native Mode, 40.0 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 3MB/Sec. Native Mode, 6MB/Sec. (typical) Compression M
- Interface: SCSI-2 16-bit (Single-ended) Asynchronous/Synchronous
- Compatibility: 2.3 GB Mode (Read only), 2.3 GB mode with Compression (Read only), 5 GB Mode (Read only), 5 GB Compression (Read only), 7 GB Mode (Read only), 7 GB Compression (Read only), 20 GB Mode (R/W), 20 GB Compression (R/W).
- Attributes provided: 8mm tape capability
- Attributes required: One 1.6-inch(41mm) half-high media bay and one SCSI-2 internal SE 16-bit address
- For 7043-270: (#6156)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6158) 20/40GB 4mm Internal Tape Drive
(No Longer Available as of May 31, 2006)
The 20/40 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 40 GB - a significant increase in capacity over the previous 12/24 4-mm internal tape drives (when using DDS-4 media).
Characteristics
- Capacity: 20 GB native mode, 40 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm DDS-4 data cartridge
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
- Interface: SCSI-2 (single ended) asynchronous/synchronous
- Compatibility: 4 GB mode (Read/Write), 8 GB compression (Read/Write), 12 GB mode (Read/Write), 24 GB compression (Read/Write), 20 GB mode (Read/Write), 40 GB compression (Read/Write)
Note: MES orders are shipped with both a black and a white bezel.
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 16-bit address
- For 7043-270: (#6158)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6159) 12/24GB 4mm Internal Tape Drive
(No Longer Available as of April 26, 2002)
The 12/24 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 8-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 24 GB - a significant increase in capacity over the previous 4/8 4-mm internal tape drives (when using DDS-3 media).
Characteristics
- Capacity: 12 GB native mode, 24 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm DDS-3 data cartridge
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 1.1 MBps native mode, 2.2 MBps (typical) compression
- Interface: SCSI-2 (single ended) asynchronous/synchronous
- Compatability: 2 GB mode (Read/Write), 4 GB compression (Read/Write); 4 GB mode (Read/Write), 8 GB compression (Read/Write); 12 GB mode (Read/Write), 24 GB compression (Read/Write)
Note: MES orders are shipped with both a black and a white bezel.
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 8-bit address
- For 7043-270: (#6159)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6203) - PCI Dual Channel Ultra3 SCSI Adapter
(No Longer Available as of December 10, 2004)
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64 bit adapter and is an excellent solution for high performance SCSI applications. The PCI Dual Channel Ultra3 SCSI Adapter provides 2 SCSI channels (busses). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external and will support a data rate of up to 160 MBytes per second, up to twice the maximum data transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes per second).
In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this Ultra3 160 MBytes per second performance, all attaching devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2 and Ultra3 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface at the lower SE bus data rate of the device.
Two industry-standard VHDCI 68 pin connectors are mounted on the
adapter's end bracket, allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68
pin, (#2118) can be used with older external SE subsystems to allow
connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI
Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI port will auto-throttle to a "Fast"
interface speed running no faster than 20MB/s max. This auto-throttle
function is performed to ensure best signal quality between host adapter
and attaching subsystem. The second external port is unaffected unless a
SE subsystem is also attached to it. If so, it would also auto-throttle
as described above.
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the supported pSeries or RS/6000 systems.
- Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
- Attributes required: One available PCI slot
- For 7043-270: (#6203)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or later, AIX 5.1 with Update CD LCD4-1103-01 or later
- Initial Order/MES/Both/Supported: MES
(#6204) PCI Universal Differential Ultra SCSI Adapter
(No Longer Available as of December 30, 2005)
The PCI Universal Differential Ultra SCSI Adapter is the latest technology advancement of an RS/6000 SCSI-2 differential adapter with a maximum data transfer rates of 40 MBytes per second. This adapter has the capability to be plugged into the newer +3.3 volt PCI slots as well as the older +5 volt PCI slots. Feature code # 6204 allows connection to external differential SCSI-2 F/W or Ultra SCSI type devices up to 25 meters away. Feature code # 6204 will negotiate with each external device and transfer data at the fastest SCSI data transfer rate capable by the external device. Check system sales pages as to which external differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048).
- Attributes provided: 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 7043-270: (#6204)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6205) PCI Dual Channel Ultra2 SCSI Adapter
(No Longer Available as of December 3, 2001)
The PCI Dual Channel Ultra2 SCSI Adapter (#6205) is a 64 bit adapter and is an excellent solution for high performance SCSI applications. The PCI Dual Channel Ultra2 SCSI Adapter provides 2 SCSI channels (busses). Each SCSI bus can either be internal or external and will support a data rate of up to 80 MBytes per second, up to twice the maximum data transfer rate of previous Ultra SCSI adapters (40 MBytes per second).
In order to achieve an Ultra2 SCSI bus data rate of up to 80 MBytes per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. In order to utilize this Ultra2 80 MBytes per second performance, all attaching devices or subsystems must also be Ultra2 LVD devices. If any device is not Ultra2 LVD, the adapter will switch its SCSI bus to single-ended (SE) performance and interface at the lower SE SCSI bus data rate of the device.
Two industry standard VHDCI 68 pin connectors are mounted on the
adapter's end bracket allowing attachement of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68
pin, (#2118) can be used with older external SE subsystems to allow
connection to the VHDCI connector on the PCI Dual Channel Ultra2 SCSI
Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI ports (both the external port being
attached to and its associated or shared internal port) will auto-
throttle to a "Fast" interface speed running no faster than 20MB/s max.
This auto-throttle function is performed to ensure best signal quality
between host adapter and attaching subsystem. The second external port
and its associated or shared internal port is unaffected unless a SE
subystem is also attached to it. If so, it would also auto-throttle as
described above.
Any supported RS/6000 system can be set up to boot from PCI Dual Channel Ultra2 SCSI Adapter (#6205). If you are running with AIX 4.3.3 or later software, this adapter has native boot support as part of that level of AIX software. If you are running with 4.2.1 software, the below procedure applies in order to boot using the PCI Dual Channel Ultra2 SCSI Adapter:
- The designated boot SCSI disk can be located under the covers of a processor unit or in an external SCSI storage unit.
- AIX version 4.2.1 must be loaded to the designated SCSI boot disk using AIX's Network Install Manager (NIM) before booting from the SCSI boot disk.
- The system with a designated SCSI boot disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation.
- Once AIX with updates is installed on the designated SCSI boot disk and the system is configured for booting, booting will take place from the boot disk drive without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time.
- Attributes provided: Attachment of internal and external SCSI devices
- Attributes required: One available PCI slot
- For 7043-270: (#6205)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6206) PCI Single-Ended Ultra SCSI Adapter
(No Longer Available as of December 10, 2004)
The PCI Single-Ended Ultra SCSI Adapter (#6206) is an ideal solution for applications requiring large block data transfers (more than 64K block size) in a multi disk drive environment utilizing SCSI-2 protocol. FC #6206 has a maximum data transfer rate of 40 MBytes per second which is twice the maximum data transfer rate of SCSI-2 Fast/Wide adapters (20 MBytes per second).
The PCI Single-Ended Ultra SCSI Adapter (#6206) conforms to the SCSI-2
standard and Fast-20 (Ultra) documentation. Industry standard 68 pin
connectors are incorporated (SCSI "P" connector definition of
X3T9.2/90-048).
Note: If any Single Ended (SE) SCSI subsystem is attached to the
external port of this adapter, the SCSI ports (both external and
internal) will auto-throttle to a "Fast" interface speed running no
faster than 20MB/s max. This auto-throttle function is performed to
ensure best signal quality between host adapter and attaching subsystem.
Limitation: Attachment of the IBM 2104 models DL1, TL1, DU3, or TU3 external disk subsystems to the external connector of this SCSI adapter is not supported when any device(s) are attached to the internal connector of the same adapter.
- Attributes provided: 15 internal or 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 7043-270: (#6206)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6207) PCI Differential Ultra SCSI Adapter
The PCI Differential Ultra SCSI Adapter is the next generation of SCSI-2 performance with maximum data transfer rates of 40 MBytes per second. Feature code # 6207 allows connection to external differential SCSI-2 F/W or Ultra SCSI type devices up to 25 meters away. Feature code # 6207 will negotiate with each external device and transfer data at the fastest SCSI data transfer rate capable by the external device. Some external Differential Ultra SCSI devices include the 7137 Disk Array Subsystem models (check sales pages) and certain External Disk Drive Models of the 7204.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048).
- Attributes provided: 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 7043-270: (#6207)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#6215) PCI SSA Multi-Initiator/RAID EL Adapter
The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, can be configured as either a two initiator non-RAID, or one initiator RAID adapter. After June 30, 1998, new microcode will allow FC #6215 to be configured as either a eight initiator non-RAID, or two initiator RAID adapter. It also has been enabled to support an optional 4 MByte Fast-Write Cache card that improves write performance in both RAID 5 or Non-RAID (one initiator configurations) operations. The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, has four ports, two SSA loops, and a supported configuration of 48 SSA disk drives per loop or 96 SSA disk drives per FC #6215. The adapter supports target mode operations and HACMP.
The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, when operated in a RAID 5 configuration will support (2+P) to (32+P) arrays and up to 6 (15+P) arrays. The adapter also supports Hot Spares in RAID 5 mode.
All models of the 7133 are supported as well as the 7131-405 and
internal RS/6000 SSA disk drive configurations. The SSA Fiber-Optic
Extender is also supported.
Note: After June 30, 1998, all current customers with a PCI or the Micro
Channel SSA Multi-Initiator/RAID EL Adapter may obtain the enhancement
upgrade microcode by downloading the code from the following Internet
URL:
If downloading from the Web is not convenient or available, upgrade microcode on CD-ROM can be obtained after June 30, 1998 by ordering RPQ 8A1096.
When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems.
These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system.
Contains links to SSA publications and other SSA Web sites, including the one below.
Contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments.
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
- Attributes provided: RAID attach capability
- Attributes required: One PCI adapter slot
- For 7043-270: (#6215)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#6222) SSA Fast-Write Cache
(No Longer Available as of October 17, 2001)
The SSA Fast-Write Cache Option Card, FC #6222, is a 4 MByte fast- write optional feature that will plug into either SSA Multi-Initiator/RAID EL Adapter (FC #6215 or FC #6219). It utilizes non- volatile RAM and has a data memory retention of over seven years. During the unlikely event of an SSA Multi-Initiator/RAID EL Adapter failure, a new SSA Multi-Initiator/RAID EL Adapter can be installed and the SSA Fast-Write Cache Option Card (FC #6222) can be removed from the failing adapter and installed in the new SSA Multi-Initiator/RAID EL Adapter insuring data integrity and continuous operation.
The SSA Fast-Write Cache Option Card (#6222) can provide as much as a 10-times improvement of data throughput and response time during certain sequence write operations compared to SSA RAID adapters without the SSA Fast-Write Cache. The response time and data transfer improvement using the option card (#6222), will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model and application parameters.
The SSA Fast-Write Cache Option Card (#6222) plugged into either SSA Multi-Initiator/RAID EL Adapter (#6215 or #6219) will operate in either Non-RAID or RAID 5 mode, in a one initiator configuration.
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
- Attributes required: Adapter (#6215) or (#6219)
- For 7043-270: (#6222)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6225) IBM Advanced SerialRAID Adapter
The Advanced SerialRAID Adapter (#6225) is a 4 port (2 loop) Serial Storage Architecture (SSA) adapter providing an instantaneous data transfer rate of up to 160 MByte/s per loop. It also provides eight- initiator, non-RAID capability, or two-initiator RAID 5 capability. The adapter accepts a 32 MByte SSA Fast-Write Cache Option Card (#6235) that improves write performance in both RAID 5 and non-RAID one-initiator applications. The Advanced SerialRAID Adapter when operated in a RAID 5 configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. The adapter also supports Hot Spares in RAID 5 mode. The Advanced SerialRAID Adapter also supports connectivity to external disk enclosures and internal RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also supported (Refer to IBM 7133 Sales literature for additional information)
Any supported RS/6000 system can be set up to boot from an Advanced SerialRAID Adapter (#6225), provided a non-RAID SSA disk is included as part of the configuration. Other disks associated with the adapter can be RAID but at least one disk must be a non-RAID SSA disk. The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. If your sytem is running with AIX 4.3.3 or later software, native boot capability is supported as part of AIX 4.3.3 or later software. If your system is running with AIX 4.2.1 or AIX 4.3.2 software, the below procedure applies in order to boot using the Advanced SerialRAID Plus Adapter:
- The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit.
- A supported AIX version of software (with the proper updates) must be loaded to the non-RAID SSA disk using AIX's Network Install Manager (NIM) before booting from the non-RAID disk.
- The system with the non-RAID SSA disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation.
- Once AIX with updates is installed on the non-RAID SSA disk and the system is configured for booting, booting will take place from the non-RAID SSA disk without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time.
The Advanced SerialRAID Adapter (# 6225) can be field updated via a code download to obtain enhanced functions as the Advanced SerialRAID Plus Adapter (# 6230). Go to the Advanced SerialRAID Plus Adapter (# 6230) description for details of these additional functions, enhancements, and AIX requirements. Refer to the below web site for information to determine how to obtain a download of this code enhancement upgrade. In addition to the code enhancement upgrade, a 128 MByte DRAM Option Card (#6231) is available as a field installable option to the Advanced SerialRAID Adapter (6225). See the 128 MByte DRAM Option Card (#6231) for information about this option.
When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems. These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system.
The above link contains links to SSA publications and other SSA Web sites, including the one below.
The above link contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments.
Limitation: Internal ports on the adapter are not supported. See machine/model specific information to determine if internal SSA disk drives and associated hardware/cables are supported.
- Attributes provided: Attachment of SSA devices
- Attributes required: One PCI bus slot
- For 7043-270: (#6225)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3
- Initial Order/MES/Both/Supported: Supported
(#6227) Gigabit Fibre Channel Adapter for PCI Bus
(No Longer Available as of December 3, 2001)
The RS/6000 Gigabit Fibre Channel Adapter for PCI Bus provides a single or dual initiator capability over an optical fiber link or loop running up to 100MB/s. With the use of optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. Distances of up to 500 meters are supported. When used with the IBM Fibre Channel Storage Hub, distances of up to 10 kilometers are supported. The RS/6000 Gigabit Fibre Channel for PCI Bus can be used to attach devices either directly, or by means of Fibre Channel Switches.
Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.
Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.
- Attributes provided: 1 FCAL interface
- Attributes required: 1 empty PCI slot
- For 7043-270: (#6227)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance Package
- Initial Order/MES/Both/Supported: MES
Fibre Channel boot capability is supported on this system with this adapter provided your system firmware and adapter firmware are at the proper support levels. Systems manufactured prior to November 30, 2001 may require a system and adapter firmware update. Check the following web URL to review and download latest firmware if needed.
Note: Fibre Channel boot also requires AIX 4.3.3 or AIX 5.1 at the September, 2001 maintenance level or later along with a disk subsystem on which this boot capability has been qualified.
(#6228) Gigabit Fibre Channel Adapter for 64-bit PCI Bus
(No Longer Available as of December 10, 2004)
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a 64-bit address/data, short form factor PCI adapter with LC type external fiber connectors that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus will auto-negotiate for the highest data rate (either 1Gps or 2Gps) of which the device or switch is capable. Distances of up to 500 meters running at 1Gbps data rate and up to 300 meters running at 2Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1Gps or 2Gps data rates.
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC Fibre Channel Conversion Cable (#2456) is required.
Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.
Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.
- Attributes provided: 1 FC/FC-AL interface
- Attributes required: 1 empty PCI slot
- For 7043-270: (#6228)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-12 or higher, or APAR IY20367 from FIXDIST at the following URL: http://techsupport.services.ibm.com/rs6k/fixes.html, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: MES
Fibre Channel boot capability is supported on this system with this adapter provided your system firmware and adapter firmware are at the proper support levels. Systems manufactured prior to November 30, 2001 may require a system and adapter firmware update. Check the following web URL to review and download latest firmware if needed.
Note: Fibre Channel boot also requires AIX 4.3.3 or AIX 5.1 at the September, 2001 maintenance level or later along with a disk subsystem on which this boot capability has been qualified.
(#6230) Advanced SerialRAID Plus Adapter
(No Longer Available as of June 24, 2005)
The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop) Serial Storage Architecture (SSA) adapter providing an instantaneous data transfer rate of up to 160 MByte/s per loop. It also provides eight- initiator, non-RAID capability, two-initiator RAID 0 + 1, two-initiator RAID 5, or one-inititor RAID 0 capability. The adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that improves write performance in RAID 0+1, RAID 5, and non-RAID applications. When the 32 MByte Fast-Write Cache Option Card is used, the adapter can be configured in either single or dual initiator fast-write cache mode. In dual initiator fast-write cache mode, if one of the two adapters fail, the failing adapter transfers control over to the other. Also, in dual initiator Fast Write Cache mode, the 128 MByte DRAM Option Card (#6231) is available and required to utilize the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte DRAM Option Card is not used in dual initiator fast-write cache mode, the effective fast-write cache capacity will be 16 MBytes on each adapter. See the 128 MByte DRAM Option Card (#6231) for information.
The Advanced SerialRAID Plus Adapter when operated in a RAID 5 configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. The adapter also supports Hot Spares in RAID 5 mode. The Advanced SerialRAID Plus Adapter also supports connectivity to external disk enclosures and internal RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also supported (Refer to IBM 7133 Sales literature for additional information)
Any supported RS/6000 system can be set up to boot from an Advanced SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included as part of the configuration. Other disks associated with the adapter can be RAID but at least one disk must be a non-RAID SSA disk. The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. If your system is running with AIX 4.3.3 or later software, native boot capability is supported. For factory system orders with AIX preload requested, an internal SCSI disk drive will be preloaded as the native boot disk even if internal SSA disk drive(s) are present. If your system is running with AIX 4.2.1 or AIX 4.3.2 software, the below procedure applies in order to boot using the Advanced SerialRAID Plus Adapter:
- The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit.
- A supported AIX version of software (with proper updates) must be loaded to the non-RAID SSA disk using AIX's Network Install Manager (NIM) before booting from the non-RAID disk.
- The system with a non-RAID SSA disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation.
- Once AIX with updates is installed on the non-RAID SSA disk and the system is configured for booting, booting will take place from the boot disk without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time.
A 3-Way Copy Function is available. This 3-Way Copy Function allows a user to create a third copy to an existing RAID-1 or RAID 0+1 array while mirrored operation continues 3-Way Copy allows the user, at any time after the copy process has completed, to split the third copy off from the original RAID-1 or RAID 0+1 array to form an independent RAID copy. This third copy or "snapshot" copy could be typically used to perform a backup or to test some new application. The 3-Way Copy Function is available only via a code download and can only be gained by going to the SSA web support pages defined below.
When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems. These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system.
The above link contains links to SSA publications and other SSA Web sites, including the one below.
The above link contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments.
Limitation: Internal ports on the adapter are not supported. See machine/model specific information to determine if internal SSA disk drives and associated hardware/cables are supported.
- Attributes provided: Attachment of SSA devices
- Attributes required: One PCI bus slot
- For 7043-270: (#6230)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6231) 128 MByte DRAM Option Card
(No Longer Available as of June 24, 2005)
The 128 MByte DRAM Option Card (#6231) is a field only optional feature to the Advanced SerialRAID Adapter (#6225) or a factory or field option for the Advanced SerialRAID Plus Adapter (#6230). This option is recommended for dual initiator fail-over Fast Write Cache (FWC) configurations. The option increases the existing DRAM on the adapter to 128 MBytes. In this type of dual initiator FWC configuation, the existing DRAM does not have enough capacity to completely contain a copy of each adapter's 32 MByte FWC and also provide additional working space. The 128 MByte DRAM Option Card provides this additional space needed to contain a full copy of each adapters 32 MByte FWC content and allows for full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card (#6231) is not used with dual-initiator FWC configurations, the effective FWC capacity is reduced to 16 MBytes per adapter.
If this feature is ordered as a field upgrade to an existing SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software and publications are also provided.
- Attributes provided: 128 MByte DRAM memory
- Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card (#6235) is also recommended.
- For 7043-270: (#6231)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #6231 for each #6230 installed.
(#6235) 32 MByte Fast-Write Cache Option Card
(No Longer Available as of June 24, 2005)
The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast- write optional feature that plugs into the IBM RS/6000 Advanced SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus (#6230). It utilizes non-volatile RAM. During the unlikely event of an Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter insuring data integrity. The 32 MByte Fast-Write Cache Option Card can provide a significant improvement of data throughput and response time during certain sequence write operations compared to SSA RAID adapters without the fast-write cache. The response time and data transfer improvement using the optional card will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (# 6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single- initiator or dual initiator configurations.
- Attributes provided: None
- Attributes required: One Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230).
- For 7043-270: (#6235)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
Note: Maximum of 1 #6235 for each #6330 installed.
(#6308) Personal Microphone
The IBM Personal Microphone is a lightweight microphone and headset which conveniently mounts over and behind the user's ear. The microphone element is attached to the earpiece with a thin tubular boom. The IBM personal Microphone allows adjustments to be made to position the microphone and headset for either the left or right ear.
The IBM Personal Microphone is a perfect addition to the microphone supplied with you system unit. It will allow each user to have their own microphone.
The microphone is suitable for a wide range of applications but is especially suited for speech recognition applications including dictation and navigation in an office environment. The microphone allows consistent performance by providing for an optimum distance the voice source and the microphone element and providing concurrent feedback to the user via the personal headset.
- Attributes provided:
- Attributes required:
- For 7043-270: (#6308)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Supported
(#6310) IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
(No Longer Available as of June 25, 2004)
Provides voice processing for up to four T1 or E1 digital trunks,
providing connectivity for 96 (T1) or 120 (E1) voice channels in a single
PCI slot. The voice processing function is provided by Voice Response
for AIX LPP. Several network attachment cables are available in support
of this adapter and the correct cable should be selected for either T1 or
E1networks. (Select from cable features: 2709 (T1,RJ-45), 2710 (E1,
RJ-45), 2871/2872 (T1, 100 ohm), 2873/2874 (E1, 120 ohm).
Note: When more than one IBM ARTIC960RxD Quad Digital Trunk PCI
Adapter (#6310) is ordered, the Artic960RxD Quad DTA, H.100, 4-drop Cable
(#2877) is required.
Note: When a Digital Trunk Quad PCI adapter (#6309) is already
present and an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is
ordered, an IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and
IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879)
are required.
Note: When an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310)
is ordered and an IBM ARTIC960RxD DSP Resource PCI Adapter (#2949) is
already present, the IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable
(#2878) and the IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter
Cable (#2879) are required.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
- Attributes provided: Connection of 1 to 4 T1/E1 Trunks
- Attributes required: Available PCI slot, appropriate cables and WebSphere Voice Response for AIX LPP application software.
- For 7043-270: (#6310)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6311) IBM ARTIC960RxF PCI Adapter for RS/6000
(No Longer Available as of June 28, 2002)
The IBM ARTIC960RxF Digital Trunk Resource PCI Adapter (DTRA) is a single slot, long, 32-bit PCI adapter. This adapter is designed to be used in conjunction with the IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (DTQA)(#6310) and provides additional DSP resources so that voice recognition channels can be supported. These two adapters are designed to be used with the IBM Voice Response for AIX Version 2.2. application but the user may program them to be used for his unique application.
Voice Response for AIX Version 2.2 is an interactive voice response
system (IVR) for the AIX operation system with selected IBM RS/6000
systems. Callers can access a wide range of enterprise applications and
data using the telephone key pad in response to scripted prompts from the
Voice Response IVR. It also provides the base for voice recognition
systems enabling a caller to interact using voice instead of buttons on
the telephone key pad.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
- Attributes provided: A single long PCI card
- Attributes required: A concurrent order or pre-existing ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) and either an H-100 Bus 4-position Cable (#2877) if total of FC (#6310) and FC (#6311) is less than or equal to 4 or H-100 Bus 8-position Cable (#4353) if total of FC (#6310) and FC (#6311) is more than 4. Two or more adjacent 32-bit or 64-bit PCI bus slots.
- For 7043-270: (#6311)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: MES
(#6505) Carrier for Ultra-SCSI 16-bit Disk
(No Longer Available as of July 31, 2001)
This feature provides a carrier for installing 16-bit SCSI drives in a backplane. This is required for any disk not available as a feature on this system.
The following IBM disk drives have been tested with this feature.
- 4.5GB Ultra-SCSI 16-bit Disk Drive
- 9.1GB Ultra-SCSI 16-bit Disk Drive
- 18.2GB Ultra-SCSI 16-bit Disk Drive
Using an untested disk drive could result in any of the following:
- Unpredicted SCSI errors
- Possible system hangs
- System damage (devices, backplane or adapter)
- Attributes provided: Disk enclosure
- Attributes required: Any available SCSI bay
- For 7043-270: (#6505)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6508) Media Bay Disk Drive Mounting Kit
(No Longer Available as of June 25, 2004)
This feature provides the hardware for mounting any valid internal half high disk in an available media bay.
- Attributes provided: Mounting of a valid disk drive in a media bay
- Attributes required: 1 media drive bay
- For 7043-270: (#6508)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6600) Quiet Touch Keyboard, US English, #103P
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6600)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6601) Quiet Touch Keyboard, French, #189
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6601)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6602) Quiet Touch Keyboard, Italian, #142
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6602)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum:))
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6603) Quiet Touch Keyboard, German/Austrian, #129
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6603)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6604) Quiet Touch Keyboard, UK English, #166
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6604)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6605) Quiet Touch Keyboard, Spanish, #172
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6605)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6606) Quiet Touch Keyboard, Japanese, #194
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6606)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6607) Quiet Touch Keyboard, Brazilian Portuguese, #275
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6607)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6608) Quiet Touch Keyboard, Canadian French, #058
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6608)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6609) Quiet Touch Keyboard, Belgian/French, #120
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6609)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6610) Quiet Touch Keyboard, Belgian/UK-Flemish, #120
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6610)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6611) Quiet Touch Keyboard, Swedish/Finnish, #153
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6611)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6612) Quiet Touch Keyboard, Danish, #159
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6612)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6613) Quiet Touch Keyboard, Bulgarian, #442
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6613)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6614) Quiet Touch Keyboard, Swiss,French/German, #150f/g
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6614)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6616) Quiet Touch Keyboard, Norwegian, #155
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6616)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6617) Quiet Touch Keyboard, Dutch, #143
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6617)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6618) Quiet Touch Keyboard, Portuguese, #163
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6618)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6619) Quiet Touch Keyboard, Greek, #319
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6619)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6620) Quiet Touch Keyboard, Hebrew, #212
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6620)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6621) Quiet Touch Keyboard, Hungarian, #208
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6621)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6622) Quiet Touch Keyboard, Icelandic, #197
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6622)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6623) Quiet Touch Keyboard, Polish, #214
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6623)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6624) Quiet Touch Keyboard, Romanian, #446
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6624)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6625) Quiet Touch Keyboard, Slovakian, #245
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
(#6626) Quiet Touch Keyboard, Czech, #243
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6626)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6627) Quiet Touch Keyboard, Turkish, #179
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6627)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6628) Quiet Touch Keyboard, Turkish, #440
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6628)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6629) Quiet Touch Keyboard, LA Spanish, #171
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6629)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6630) Quiet Touch Keyboard, Arabic, #238
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6630)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6632) Quiet Touch Keyboard, Serbian-Cyrillic, #118
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6632)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6633) Quiet Touch Keyboard, Korean, #413
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6633)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6634) Quiet Touch Keyboard, Chinese/US, #467
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6634)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6635) Quiet Touch Keyboard, French Canadian, #445
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6635)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6636) Quiet Touch Keyboard, Thailand, #191
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6636)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6638) Quiet Touch Keyboard, Russian, #443
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6638)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6639) Quiet Touch Keyboard, Croatian, #105
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6639)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#6640) Quiet Touch Keyboard, US English ISO9995, #103P
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#6640)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
(No Longer Available as of June 23, 2006)
This cable provides attachment between the 128-port Asynchronous Controller and the first RAN in a daisy chain, or attachment between RANs in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain.
- For 7043-270: (#8131)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
(No Longer Available as of June 23, 2006)
This cable may be substituted for the 4.5 meter (15 foot) async controller cable whenever a customer configuration requires stacked Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain.
- For 7043-270: (#8132)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8133) RJ-45 to DB-25 Converter Cable
(No Longer Available as of November 26, 2010)
This cable can be used to attach EIA-232 devices to the 16 port EIA 232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async subsystem. This cable provides a 25-pin D shell connector for device attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 7043-270: (#8133)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8135) 64-Port to 128-Port Pin-Out Converter
(No Longer Available as of July 31, 2001)
The 64-Port to 128-Port Pin-out Converter allows devices currently s using 16-Port Concentrators (FC 6401 - from 64-port Async Subsystem) to attach to 16-Port RANs (FC 8130/8134/8136). Quantity (4) per order.
- Attributes provided: 4 RJ-45 EIA-232 ports
- Attributes required: 4 device cables using 64-port RJ45 wiring.
- For 7043-270: (#8135)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
Provides remote connection of up to 16 EIA-232 devices to a 128-Port Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31 meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps) from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 7043-270: (#8137)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8138) Enhanced Remote Asynchronous Node 16-Port RS-422
(No Longer Available as of July 31, 2001)
Provides remote connection of up to 16 RS-422 devices to a 128-Port Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Supports the following interface signals: +TxD, +RxD, -TxD, -RxD.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum RS-422 distance of up to 1200 meters (3930 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps) from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One (#2944) per eight (#8138s)
- For 7043-270: (#8138)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8422) Spaceball 3D Input Device
(No Longer Available as of December 30, 2006)
Spaceball is a 3D input device that allows a customer to view a computer-generated model from many angles. By applying fingertip control to push, pull, and twist the ball, you manipulate the image on the screen. Spaceball facilitates zooming, panning, and rotating.
- Attributes provided: Spaceball 3D Input Device
- Attributes required: S1 or S2 serial port
- For 7043-270:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#8423) Magellan XT 3D Input Device
(No Longer Available as of December 30, 2006)
The Magellan XT 3D Input Device is a high-level 3D input device which provides real-time 3D motion control for increased productivity, better design comprehension, and early detection of design errors.
- Attributes provided: Magellan XT 3D Input Device
- Attributes required: S1 or S2 serial port
- For 7043-270: (#8423)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#8700) Quiet Touch Keyboard - Business Black, US English, #103P
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8700)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8701) Quiet Touch Keyboard - Business Black, French, #189
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8701)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8702) Quiet Touch Keyboard - Business Black, Italian, #142
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8702)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8703) Quiet Touch Keyboard - Business Black, German/Austrian, #129
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8704) Quiet Touch Keyboard - Business Black, UK English, #166
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8705) Quiet Touch Keyboard - Business Black, Spanish, #172
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8706) Quiet Touch Keyboard - Business Black, Japanese, #194
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8706)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8707) Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8708) Quiet Touch Keyboard - Business Black, Canadian French, #058
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8709) Quiet Touch Keyboard - Business Black, Belgian/French, #120
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8709)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8710) Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8710)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8711) Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8712) Quiet Touch Keyboard - Business Black, Danish, #159
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8713) Quiet Touch Keyboard - Business Black, Bulgarian, #442
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8713)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8714) Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8716) Quiet Touch Keyboard - Business Black, Norwegian, #155
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8717) Quiet Touch Keyboard - Business Black, Dutch, #143
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8717)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8718) Quiet Touch Keyboard - Business Black, Portuguese, #163
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8719) Quiet Touch Keyboard - Business Black, Greek, #319
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8720) Quiet Touch Keyboard - Business Black, Hebrew, #212
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8721) Quiet Touch Keyboard - Business Black, Hungarian, #208
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8722) Quiet Touch Keyboard - Business Black, Icelandic, #197
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8723) Quiet Touch Keyboard - Business Black, Polish, #214
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8723)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8724) Quiet Touch Keyboard - Business Black, Romanian, #446
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8725) Quiet Touch Keyboard - Business Black, Slovakian, #245
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8725)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8726) Quiet Touch Keyboard - Business Black, Czech, #243
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8726)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8727) Quiet Touch Keyboard - Business Black, Turkish, #179
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8727)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8728) Quiet Touch Keyboard - Business Black, Turkish, #440
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8728)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8729) Quiet Touch Keyboard - Business Black, LA Spanish, #171
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8729)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8730) Quiet Touch Keyboard - Business Black, Arabic, #238
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8730)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8732) Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8732)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8733) Quiet Touch Keyboard - Business Black, Korean, #413
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8733)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8734) Quiet Touch Keyboard - Business Black, Chinese/US, #467
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8734)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8735) Quiet Touch Keyboard - Business Black, French Canadian, #445
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8735)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8736) Quiet Touch Keyboard - Business Black, Thailand, #191
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8736)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8738) Quiet Touch Keyboard - Business Black, Russian, #443
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8738)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8739) Quiet Touch Keyboard - Business Black, Croatian, #105
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8739)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#8740) Quiet Touch Keyboard - Business Black, US English ISO9995, #103P
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system installed.
- For 7043-270: (#8740)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#8741) 3-Button Mouse - Business Black
(No Longer Available as of May 31, 2006)
3-button dynamic tracking pointing device, utilizes opto-mechanical technology, resolution is 320 DPI, 3-meter cable, Business Black color, standard 6-pin mini-DIN connection.
- Attributes provided: Mouse capability
- Attributes required: Mouse port
- For 7043-270: (#8741)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#9004) Southern Hemisphere Designator for Monitors
(No longer available as of December 31, 2020)
Specifies that southern hemisphere models are required for all monitors on the initial plant order or on MES orders.
- Attributes provided: None
- Attributes required: Monitor
- For 7043-270: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7043-270: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-270: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9721) Language Group Specify - Russian
- Attributes provided:
- Attributes required:
- For 7043-270: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9800) Power Cord Specify - United States/Canada
The following countries use the #9800 power cord to power the system unit and/or peripheral features requiring a power cord.
- DOM U.S.
- 649 CANADA
- 832 SAUDI ARABIA
- 619 BAHAMAS
- 621 BARBADOS
- 627 BERMUDA
- 629 BOLIVIA
- 631 BRAZIL
- 661 COLOMBIA
- 663 COSTA RICA
- 681 DOMINICAN REPUBLIC
- 683 ECUADOR
- 829 EL SALVADOR
- 731 GUATEMALA
- 640 GUYANA
- 735 HONDURAS
- 759 JAMAICA
- 781 MEXICO
- 791 NETHERLANDS ANTILLES
- 811 PANAMA
- 843 SURINAM
- 859 TRINIDAD
- 871 VENEZUELA
- 760 JAPAN
- 761 JAPAN (PDS)
- 766 KOREA
- 818 PHILIPPINES
- 858 TAIWAN
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9820)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9821) Power Cord Specify - Denmark (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9821)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9825) Power Cord Specify - United Kingdom (250V, 13A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9825)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9827) Power Cord Specify - Israel (250V, 6-16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9827)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9828) Power Cord Specify - Switzerland (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9828)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9830) Power Cord Specify - Italy (250V, 10A and 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9830)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9831) Power Cord Specify - Argentina (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9831)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9833) Power Cord Specify - Thailand (250V, 15A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9833)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
(#9834) Power Cord Specify - Uruguay (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7043-270: (#9834)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
Feature exchanges
None.
Back to top
Accessories
None.
Customer replacement parts
None.
Back to top
Machine elements
None.
Back to top
Supplies
None.
Supplemental media
None.
Back to top
Trademarks
(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Terms of use
IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this Sales Manual at any time without notice. This Sales Manual is provided for your information only. Additional terms of use are located at
 |
© IBM Corporation 2020.