IBM Power Systems enhances I/O and server options
IBM United States Hardware Announcement 116-088October 11, 2016
ENUS116-088.PDF| Table of contents | ||||||||||||||||||||
|
(Corrected on October 25, 2016)
Revised Planned availability date section.
 |
| At a glance |
 |
IBM® Power Systems™ enhances its I/O and server options with the following offerings:
- DDR4 CDIMM memory options provide energy savings and DDR4 configuration options:
- Smaller-capacity CDIMMs join the existing large-capacity CDIMM for IBM Power® E880, E880C, E870, and E870C servers.
- For IBM Power S812L, S814, S822, S822L, S824, and S824L servers, a full set of DDR4 DIMMs is announced that match existing DDR3 capacities.
- Capacity Backup for Power Enterprise Systems is new simplified and cost-effective HA/DR offering that replaces the existing Capacity Backup for PowerHA® offering. It is now available for the IBM Power E870, E880, E870C, and E880C servers.
- The Power S814 4-core and 6-core offering is enhanced with:
- Reduced-price disk drives for IBM i clients buying a new server.
- A new RDX USB Top-Mount Docking Station for IBM AIX®, IBM i, and Linux™ clients.
- The Power S822 server is enhanced for IBM i with firmware 860.10 clients to allow up to four cores per IBM i partition.
- Two new SAS storage enclosures are introduced:
- The EXP12SX SAS Storage Enclosure provides twelve 3.5-inch large form factor (LFF) bays for large-capacity, low-cost-per-GB nearline disk drives.
- The EXP24SX SAS Storage Enclosure provides twenty-four 2.5-inch small form factor (SFF) bays for high-performance disk or solid-state drive (SSD).
- New 7.72/8.0 TB and 3.86/4.0 TB LFF 7200 rpm disk drives are introduced for use in the EXP12SX Storage Enclosures.
- New PCIe3 Cryptographic Coprocessors 4767 (#EJ32/#EJ33) are designed for improved performance and security-rich services for your sensitive workloads and to deliver high throughput for cryptographic functions.
- New PCIe3 2-port 100GbE (NIC and RoCE) QSFP28 Adapter x16 (#EC3M/#EC3L), based on Mellanox ConnectX-4 Ethernet Network Controller, provides 100Gb/s Ethernet connectivity.
- The PCIe3 1-port and 2-port 100 GB EDR InfiniBand (IB) adapter features (#EC3E/#EC3T) are supported in more Power server models.
- The cost of attaching a PCIe Gen3 I/O drawer to a scale-out server is reduced.
- The 2-Port 8 Gb Fibre Channel adapter offers new price/performance for POWER8® Linux-only servers.
- Intelligent PDUs with switched function are now available on IBM POWER8 servers, providing more electrical power receptacles, intelligent monitoring, and the ability to remotely reset equipment by individual receptacle.
- Support for the PCIe3 NVMe Flash Adapter (1.6 TB and 3.2 TB) is expanded to add boot capability and to support the IBM Power E850 and E850C servers.
- The PCIe3 2-port 10 GbE (NIC and RoCE) adapter can now be a "base" Ethernet adapter, adding configuration flexibility.
Back to top
|
| Overview |
|
Multiple hardware enhancements are announced for Power Systems, including DDR4 memory, entry enhancements, SAS enclosures, disk, PCIe crypto card, PCIe 100Gb Ethernet card, expanded PCIe 100Gb IB support, lower-cost PCIe Gen3 I/O drawer attachment, and more.
DDR4 memory can provide up to 30% improved energy efficiency compared to equivalent DDR3 memory with the same high-performance, enterprise-class 1600 MHz memory characteristics currently offered with DDR3 technology. The Power E880, E880C, E870, and E870C servers are enhanced with DDR4 memory CDIMMs, which provide 64 GB, 128 GB, 256 GB, and 512 GB capacity points. These are in addition to the existing 1 TB DDR4 capacity point. The IBM Power S812L, S814, S822, S822L, S824, and S824L servers are enhanced with 16 GB, 32 GB, 64 GB, and 128 GB DDR4 memory features, matching the previously available DDR3 capacity points. The Power E850C server is introduced with DDR4 memory features, and the Power E850 server has a statement of direction for future additional DDR4 memory.
The Capacity Backup (CBU) for Power Enterprise Systems, formerly called Capacity Backup for PowerHA, has been enhanced to deliver greater flexibility for clients looking to lower their HA/DR costs. The new CBU for Power Enterprise Systems offering provides greater usage capability, eliminates many of the requirements and restrictions of the former offering and extends the offering farther down the Power Enterprise Systems product line. The CBU for Power Enterprise Systems offering is now available for the Power E870, E870C, E880, and E880C systems.
The 4-core or 6-core Power S814 server has two entry-specific enhancements. First, IBM i clients can order up to four lower-priced 15k rpm 283GB disk drives. The Express® Edition feature EU2C or EU2D is require to order these lower-price drives. Second, an RDX USB Top Mount Docking Station (#EUA3) is available for a Power S814 tower configuration. This provides more integrated RDX packaging for entry POWER8 servers running AIX, IBM i, or Linux.
The Power S822 server is enhanced for IBM i with firmware 860.10 clients to allow up to four cores per IBM i partition. With previous firmware levels, the maximum is two cores per IBM i partition.
The new EXP24SX is a storage expansion enclosure with twenty-four 2.5-inch SFF SAS bays. The storage enclosure supports up to 24 hot-swap hard disk drives (HDD) or SSDs in only 2 EIA of space in a 19-inch rack. The EXP24SX SFF bays use SFF Gen2 (SFF-2) carriers/trays identical to the carrier/trays in the previous EXP24S Drawer. It has been designed to support 12Gb SAS interfaces, double the existing EXP24S drawer bandwidth. The drawer can be configured to mode 1, 2, or 4, and its mode can be reconfigured at the client site following specific procedures.
The new EXP12SX is a storage expansion enclosure with twelve 3.5-inch LFF SAS bays. The storage enclosure supports up to 12 hot-swap HDDs in only 2 EIA of space in a 19-inch rack. The EXP12SX SFF bays use LFF Gen1 (LFF-1) carriers/trays. The 4 KB sector drives (4096 or 4224) of 7.72/8.0 TB or 3.86/4.0 TB are supported for AIX and Linux environments. The drawer can be configured to mode 1, 2, or 4, and its mode can be reconfigured at the client site following specific procedures.
Four feature numbers are used to identify these two SAS enclosures. The EXP24SX uses feature ESLS for servers supporting multiple operating systems and uses feature ELLS for servers that are Linux-only. The EXP12SX uses feature ESLL for servers supporting multiple operating systems and uses feature ELLL for servers that are Linux-only.
The PCIe Cryptographic Coprocessor 4767 is a high-performance hardware security module (HSM) suitable for high-security processing and high-speed cryptographic operations. IBM PCIe Cryptographic Coprocessor adapter (#EJ32/#EJ33) is the latest generation and fastest of the IBM cryptographic coprocessor family.
The new PCIe3 2-port 100 GbE (NIC and RoCE) QSFP28 Adapter x16 (#EC3M, #EC3L), based on the Mellanox ConnectX-4 Ethernet Network Controller, provides 100 Gb/s Ethernet connectivity.
Support for the 1-port and 2-port 100 Gb EDR InfiniBand adapters (#EC3T/#EC3E) is expanded to include more Power System models for Linux environments. The Power E880, E880C, E870, E870C, and E850C servers are now supported.
A new copper cable option (#ECCS) is available for Power scale-out servers and the Power E850 and E850C servers to attach the PCIe Gen3 I/O Drawer fanout module. This is a much lower-cost cabling option than the currently available active optical cables. Feature ECCS provides a pair of copper cables that have the same performance characteristics, but are thicker and are only 3 meters in length compared to optical cables.
The PCIe2 8Gb 2-Port Fibre Channel Adapter adds a lower-price 8 Gb Fibre Channel option for Linux-only S812L, S822L, and S824L POWER8 servers. The adapter (#EL5Y and #EL5Z) should now be used instead of the existing 8Gb 2-port feature EN0F and feature EN0G adapters on Linux-only servers.
POWER8 servers are enhanced with a new generation of intelligent, switched PDUs that provide more electrical receptacles, better monitoring, and the ability to remotely turn an individual receptacle on or off. Four new PDUs are introduced. Two have nine C19 receptacles, and two have twelve C13 receptacles. Either 1-phase or 3-phase power can be used, depending on the PDU and country wiring standard. These PDUs are follow-on products to the feature 7109, 7189, and 7196 PDUs. The existing feature 7188 PDU 12xC13 continues to be the lower-function, lower-cost option.
Support for the PCIe3 NVMe Flash Adapter (1.6 TB (#EC54/#EC55 and 3.2 TB #EC56/#EC57) is expanded. PCIe NVMe Flash Adapters can offer significant improvements in write latency and I/O throughput compared to using SAS-attached SSDs or FC-attached SSDs in SANs or FlashSystems for Linux applications using the high-performance NVMe interface protocol; for example, using the NVMe Flash Adapter for Rapid Restart of SAP HANA. The speed of the NVMe Flash Adapter helps the partition load more quickly, improving up-time of the application. These enhancements are announced:
- Boot drive support is added.
- Support is added for the Power E850 and E850C servers, joining existing support on many other POWER8 servers, including recently announced Power E870C and E880C servers running in a Linux environment.
- The Power S812L, S822L, and S824L systems now support Power NV mode, also known as bare metal.
Configuration flexibility for the PCIe3 2-port 10GbE (NIC and RoCE) Adapter is enhanced. This adapter is added to the list of Ethernet adapters that can be selected with a new server as the base Ethernet adapter in AIX/Linux environments.
Back to top
|
| Feature exchange |
|
Not applicable.
Back to top
|
| Key prerequisites |
|
For the operating system required, see the specific I/O feature description section in the individual server Sales Manuals.
Back to top
|
| Planned availability date |
|
- October 21, 2016, for ESFG and ESDV
- October 25, 2016, for EKLM and EHKV
- November 18, 2016, for all features except for ESFG, ESDV, EKLM, EHKV, and EUA3
- December 9, 2016, for EUA3
Back to top
|
| Description |
|
DDR4 DRAM memory options for Power E870C/E880C, Power E870/E880, Power S812L, S822L, S822, and Power S814, S824, S824L servers
Refreshing memory options for existing DDR3 provides more configuration flexibility with improved energy efficiency. DDR4 DRAM uses up to 30% less energy and produces less heat than equivalent capacity DDR3 DRAM. Larger-capacity memory cards have a greater energy savings than smaller-capacity memory cards. Busy memory uses much more energy than idle memory. The memory controller and L4 cache and the electrical use of other memory card components in the CDIMM does not change whether using DDR3 or DDR4. Thus the overall DDR4 savings at a CDIMM level varies and is probably up to 20% less energy used per card. At a system level, this translates to perhaps up to a 2% - 3% energy savings on a server with a large amount of memory. The DDR4 memory and DDR3 memory have the same 1600 MHz speed, the same L4 cache, and the same on-card memory controller and thus have the same performance.
DDR4 and Power E870C/E880C and Power E870/E880 servers
These enterprise servers have a memory feature that represents four physical DDR4 1600MHz CDIMM memory cards:
- 64 GB (4 x 16 GB) DDR4 (#EM8U)
- 128 GB (4 x 32 GB) DDR4 (#EM8V)
- 256 GB (4 x 64 GB) DDR4 (#EM8W)
- 512 GB (4 x 128 GB) DDR4 (#EM8X)
The previously introduced 1 TB (4 x 256 GB) DDR4 (#EM8Y) continues to be supported.
DDR4 rules are identical to existing memory rules:
- A minimum of four memory feature codes per system node (50% memory slots filled).
- Memory activation features are the same for DDR3 or DDR4 memory.
- A minimum of 25% of the installed physical memory capacity must have static activations on that specific server.
- A minimum of 50% of the installed physical memory capacity must have activations (static, mobile, or mobile-enabled) on that specific server. Mobile activations moved elsewhere in a pool still apply toward meeting this minimum. Mobile activations moved into that specific server that are per IBM inventory records (AAS/WTAAS) still on a different server cannot be used for this minimum.
- DDR4 memory cannot be mixed on the same system node with DDR3 memory, but a multinode system can have DDR3 in one node and DDR4 in a different node.
- Only one size CDIMM can be placed on one single-chip module (SCM) (multiple size CDIMMs can be placed on one node). There are four SCMs per system node.
- Firmware 860, or later, is required for DDR4 features for 64 GB to 512 GB memory features and for having both DDR3 and DDR4 memory on the same multinode server.
On same-serial number model upgrades from the Power 770 (9117-MMD) to the Power E870C or E870 (9080-MME/9119-MME) or the Power 780 (9179-MHD) to the Power E880C or E880 (9080-MHE / 9119-MHE) servers, clients can optionally choose to convert their IBM POWER7® + memory into IBM POWER8 DDR4 memory. DDR4 memory options are available to the 64 GB feature (#EM8U), 128 GB feature (#EM8V), 256 GB feature (#EM8W), or 512 GB feature (#EM8X).
DDR4 and Power S812L, S822, and S822L
These 2U scale-out servers have a memory feature that represents one physical DDR4 1600 MHz DIMM memory card. The capacity options are identical to the existing DDR3 memory features. DDR4 features are:
- 16 GB DDR4 (#EM8P)
- 32 GB DDR4 (#EM8Q)
- 64 GB DDR4 (#EM8R)
DDR4 configuration rules are identical to DDR3 existing memory rules with two additions. DDR4 and DDR3 memory features cannot be mixed on the same system. Firmware 860, or later, is required for DDR4 features.
DDR4 and Power S814, S824, and S824L
These 4U scale-out servers have a memory feature that represents one physical DDR4 1600 MHz DIMM memory card. The capacity options are identical to the existing DDR3 memory features. DDR4 features are:
- 16 GB DDR4 (#EM91)
- 32 GB DDR4 (#EM92)
- 64 GB DDR4 (#EM93)
- 128 GB DDR4 (#EM94)
DDR4 configuration rules are identical to DDR3 existing memory rules with two additions. DDR4 and DDR3 memory features cannot be mixed on the same system. Firmware 860, or later, is required for DDR4 features.
Capacity Backup for Power Enterprise SystemsCapacity Backup for Power Enterprise Systems, formerly known as Capacity Backup for PowerHA, is an enhanced offering for the Power E870, E880, E870C, and E880C servers that enables high-availability and disaster-recovery configurations at a cost-effective price. With Capacity Backup for Power Enterprise Systems, clients can purchase a new Power Enterprise server that is specifically to be used for high-availability or disaster-recovery purposes at a reduced price. It includes a number of no-charge Elastic CoD memory days based on a defined Power E870, E880, E870C, or E880C production system that the client owns. These Capacity Backup for Power Enterprise Systems can only be ordered with a maximum of eight static processor activations. All other processor activations supported on these systems are through Elastic COD processor days or Mobile Processor activations from another system within the Enterprise Pool that they exists in.
The Power Systems Capacity Backup system can only be purchased by clients who have purchased a Power E870, E880, E870C, or E880C server for application workload production purposes. Clients that have purchased a Power E870, E880, E870C, or E880C production system are now entitled to purchase a new Capacity Backup for Power Enterprise System with the following configuration restrictions:
- You can only order a Power CBU for Power Enterprise System with the same system processor node/frequency as the designated Power production system.
- You must purchase exactly eight Static Processor activations on the Power CBU for Power Enterprise System.
- Activation of more than eight processor cores on the Power CBU for Power Enterprise System is not supported.
- In addition to the eight static cores that are required to be purchased with the CBU for Power Enterprise Systems, only Elastic COD processor days or Mobile Processor activations from another system that have been moved to the CBU for Power Enterprise Systems from another system within the same Enterprise Pool can be used on the CBU for Power Enterprise Systems.
For Power E870/E870C CBU for Power Enterprise Systems
- You must order feature EB3K on every Power E870 or E870C CBU for Power Enterprise System to add feature EPBW or EPBX to the e-configurators.
- Clients are entitled to order up to the same number of EPBW features (4.02 GHz, 32-core POWER8 processor) on their Power E870 or E870C 4.02 GHz CBU for Power Enterprise System as there are EPBA features on their Power E870 or E870C 4.02 GHz production system.
- Clients are entitled to order up to the same number of EPBX features (4.19 GHz, 40-core POWER8 processor) on their Power E870 4.19 GHz CBU for Power Enterprise System as there are EPBC features on their Power E870 4.19 GHz production system.
For Power E880/E880C CBU for Power Enterprise Systems
- Clients are entitled to order up to the same number of EPBG features (4.35 GHz, 32-core POWER8 processor) on their Power E880 or E880C 4.35 GHz CBU for Power Enterprise System as there are EPBB features on their Power E880 or E880C 4.35 GHz production system.
- Clients are entitled to order up to the same number of EPBT features (4.19 GHz, 40-core POWER8 processor) on their Power E880 or E880C 4.19 GHz CBU for Power Enterprise System as there are EPBS features on their Power E880 or E880C 4.19 GHz production system.
- Clients are entitled to order up to the same number of EPBH features (4.02 GHz, 48-core POWER8 processor) on their Power E880 or E880C 4.02 GHz CBU for Power Enterprise System as there are EPBD features on their Power E880 or E880C 4.02 GHz production system.
For every active core on the Power E870, E880, E870C, or E880C production system exceeding eight, the client will receive 11,680 Elastic CoD GB days to be used for high-availability and disaster-recovery purposes only. The Elastic CoD memory days must be turned on immediately with the installation of the Power CBU for Power Enterprise System and must be left on until all the days are used. The Elastic CoD memory days are renewable for no charge a year after the Power CBU for Power Enterprise System has been installed with proof that the Power E870, E880, E870C, or E880C production system requirements have been met. The Elastic CoD days continue to be renewable as long as the original client that purchased the Power E870, E880, E870C, or E880C production system remains in production services.
The Power Capacity Backup for Power Enterprise System must go through a registration process.
All Power E870 or E870C CBU for Power Enterprise Systems, no matter whether they use the 32-core or 40-core POWER8 processor, will have feature EB3K installed on the system. All Power E880 or E880C CBU for Power Enterprise Systems, no matter whether they use the 32-core, 40-core, or 48-core POWER8 processor, will have feature EB3J installed on the system. Feature number EB3K or EB3J designates that this is a Capacity Backup for Power Enterprise System. A stop-ship will automatically be put in place until Manufacturing is notified that the CBU system meets configuration requirements based on the identified Power E870, E870C, E880, or E880C production system.
Two enhancements for Power System S814
IBM i entry S814 clients ordering a new 4-core or 6-core processor can optimally order up to four lower-priced 15k rpm 283 GB disk drives. The drives can either be 4k byte sector (#ESFG) or 5xx byte sector (#ESDV), and must be located in the S814 system unit (SFF-3). The IBM i Edition feature EU2C for the 4-core and feature EU2D for the 6-core S814 are prerequisites.
These drives are available only with the shipment of a new server and are not available as an MES order. Following normal configuration rules, they can be mixed with other SAS feature drives. Features ESFG (4k) and ESDV (5xx) cannot be mixed on the same server.
AIX, IBM i, and Linux entry S814 clients ordering a new 4-core or 6-core processor that is a tower configuration have a new RDX option. Feature EUA3 ships an RDX docking station and an enclosure for the docking station. The enclosure is firmly mounted on top of a Power S814 tower configuration. It is not available for a rack-mounted configuration. The enclosure adds about 5 cm (2 in.) height to the tower. Feature EUA3 is factory installed only and cannot be orderable as an MES. The RDX docking station can be removed from the enclosure using concurrent maintenance.
The RDX docking station accommodates RDX removable disk cartridges of any capacity. The disk is in a protective rugged cartridge enclosure that plugs into the docking station. The docking station holds one removable rugged disk drive/cartridge at a time. The rugged removable disk cartridge and docking station performs saves, restores, and backups similar to tape drive. This docking station can be an excellent entry capacity/performance option. Functionally, this docking station is identical to the feature EU03 and EU04 RDX USB docking stations introduced on POWER7 servers.
Internal USB cables in the enclosure connect the RDX docking to internal USB connections in the server. The internal cables are included with feature EUA3 and are not ordered separately. Due to the internal USB connections, the two USB ports on the rear of the server are removed. The USB port at the front of the server remains available for client use.
Power S822 IBM i enhancement
The Power S822 server is enhanced for IBM i with firmware 860.10 to allow up to four cores per IBM i partition. With earlier firmware levels, the maximum is two cores per IBM i partition. Multiple IBM i partitions can be created and run concurrently, and each individual partition can now have up to four cores. No hardware features are required for this enhancement. The server remains at an IBM i P10 software tier.
EXP24SX SAS Storage Enclosure (#ESLS, #ELLS)
The new EXP24SX is a storage expansion enclosure with twenty-four 2.5-inch SFF SAS bays. It supports up to 24 hot-swap HDDs or SSDs in only 2 EIA of space in a 19-inch rack. The EXP24SX SFF bays use SFF Gen2 (SFF-2) carriers or trays identical to the carrier or trays in the previous EXP24S drawer.
The EXP24SX Drawer feature ESLS is supported on the Power S814, S822, S824, E850C, E870C, E870, E880C, and E880 servers by AIX, IBM i, Linux, and VIOS. The EXP24SX Drawer feature ELLS is supported on the Linux-only Power S812L, S822L, and S824L servers. Firmware 860, or later, is required.
With AIX/Linux/VIOS, the EXP24SX can be ordered with four sets of 6 bays (mode 4), two sets of 12 bays (mode 2), or one set of 24 bays (mode 1). With IBM i, only one set of 24 bays (mode 1) is supported. It is possible to change the mode setting in the field using software commands along with a specifically documented procedure. The predecessor EXP24S did not support this mode change in the field.
Important: When changing modes, it is very important that a skilled, technically qualified person follow the special documented procedures. Improperly changing modes can potentially destroy existing RAID sets, prevent access to existing data, or allow other partitions to access another partition's existing data. Hire an expert to assist if you are not familiar with this type of reconfiguration work.
Four mini-SAS HD narrow ports on the EXP24SX are attached to PCIe Gen3 SAS adapters or attached to an integrated SAS controller in a POWER8 scale-out server such as the Power S814, S822, or S824 servers. The following PCIe3 SAS adapters support the EXP24SX:
- PCIe3 RAID SAS Adapter Quad-port 6 Gb x8 (#EJ0J or #EJ0M or #EL3B or #EL59)
- PCIe3 12 GB Cache RAID SAS Adapter Quad-port 6 Gb x8 (#EJ0L)
- PCIe3 12 GB Cache RAID Plus SAS Adapter Quad-port 6 Gb x8 (#EJ14)
Earlier generation PCIe2 or PCIe1 SAS adapters are not supported with the EXP24SX.
The attachment between the EXP24SX and the PCIe3 SAS adapters or integrated SAS controllers is through SAS YO12 or X12 cables. X12 and YO12 cables are designed to support up to 12 Gb SAS. The PCIe Gen3 SAS adapters support up to 6 Gb throughput. The EXP24SX has been designed to support up to 12 Gb throughput if future SAS adapters support that capability. All ends of the YO12 and X12 cables have mini-SAS HD narrow connectors. 4Q2016 cable options are:
- X12 cable: 3-meter copper (#ECDJ)
- YO12 cables: 1.5-meter copper (#ECDT), 3-meter copper (#ECDU)
Not attached to the EXP24SX is a new AA12 cable interconnecting a pair of PCIe3 12GB adapters (two #EJ14 or two #EJ0L). These higher-bandwidth cables could support 12 Gb throughput if future adapters support that capability. Copper feature ECE0 is 0.6 meters long and ECE3 is 3 meters long.
One no-charge specify code is used with each EXP24SX I/O Drawer (#ESLS/#ELLS) to communicate to IBM configurator tools and IBM Manufacturing which mode setting, adapter, and SAS cable are needed. With this specify code, no hardware is shipped. The physical adapters, controllers, and cables must be ordered with their own chargeable feature numbers. There are more technically supported configurations than represented by these specify codes. IBM Manufacturing and IBM configurator tools such as e-config only understand and support EXP24SX configurations represented by these specify codes.
| Specify code | Mode | Adapter/Controller | Cable to Drw | Environment |
|---|---|---|---|---|
| #EJW0 | Mode 1 | CEC SAS Ports | 2 YO12 cables | AIX/IBM i/Linux/VIOS |
| #EJW1 | Mode 1 | One (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 YO12 cable | AIX/IBM i/Linux/VIOS |
| #EJW2 | Mode 1 | Two (one pair) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 YO12 cables | AIX/IBM i/Linux/VIOS |
| #EJW3 | Mode 2 | Two (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJW4 | Mode 2 | Four (two pair) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJW5 | Mode 4 | Four (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJW6 | Mode 2 | One (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 YO12 cables | AIX/Linux/VIOS |
| #EJW7 | Mode 2 | Two (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 YO12 cables | AIX/Linux/VIOS |
| #EJWF | Mode 1 | Two (one pair) #EJ14 | 2 Y012 cables | AIX/IBM i/Linux/VIOS |
| #EJWG | Mode 2 | Two (one pair) #EJ14 | 2 X12 cables | AIX/Linux/VIOS |
| #EJWJ | Mode 2 | Four (two pair) #EJ14 | 2 X12 cables | AIX/Linux/VIOS |
| #EJWP | Mode 1 | Two (one pair) #EJ0L | 2 YO12 cables | AIX/IBM i/Linux/VIOS |
| #EJWR | Mode 2 | Four (two pair) #EJ0L | 2 X12 cables | AIX/Linux/VIOS |
| #EJWS | Mode 2 | Two (one pair) #EJ0L | 2 X12 cable | AIX/Linux/VIOS |
All of the above EXP24SX specify codes assume a full set of adapters and cables able to run all the SAS bays configured. The following specify codes communicate to IBM Manufacturing a lower-cost "partial" configuration is to be configured where the ordered adapters and cables can run only a portion of the SAS bays. The future MES addition of adapters and cables can enable the remaining SAS bays for growth. The following specify codes are used:
| Specify | Mode | Adapter/Controller | Cable to Drw | Environment |
|---|---|---|---|---|
| #EJWA (half of #EJW7) | Mode 2 | One (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 YO12 cables | AIX/Linux/VIOS |
| #EJWB (half of #EJW4) | Mode 2 | Two (one pair) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 X12 cable | AIX/Linux/VIOS |
| #EJWC (1/4th of #EJW5) | Mode 4 | One (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 X12 cable | AIX/Linux/VIOS |
| #EJWD (half of #EJW5) | Mode 4 | Two (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 X12 cables | AIX/Linux/VIOS |
| #EJWE (3/4th of #EJW5) | Mode 4 | Three (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJWH (half of #EJWJ) | Mode 2 | Two (one pair) #EJ14 | 1 X12 cables | AIX/Linux/VIOS |
| #EJWT (half of #EJWR) | Mode 2 | Two (one pair) #EJ0L | 1 X12 cable | AIX/Linux/VIOS |
An EXP24SX Drawer in mode 4 can be attached to two or four SAS controllers and provide a great deal of configuration flexibility. For example, if using unpaired feature EJ0J adapters, these EJ0J adapters could be in the same server in the same partition, same server in different partitions, or even different servers.
An EXP24SX in mode 2 has similar flexibility. If the I/O drawer is in Mode 2, then half of its SAS bays can be controlled by one pair of PCIe3 SAS adapters, such as a 12 GB write cache adapter pair (#EJ14), and the other half can be controlled by a different PCIe3 SAS 12 GB write cache adapter pair or by zero-write-cache PCIe3 SAS adapters.
Note that for simplicity, IBM configurator tools such as e-config assume that the SAS bays of an individual I/O drawer are controlled by one type of SAS adapter. As a client, you have more flexibility than e-config understands.
A maximum of twenty-four 2.5-inch SSDs or 2.5-inch HDDs is supported in the EXP24SX 24 SAS bays. There can be no mixing of HDDs and SSDs in the same mode-1 drawer. HDDs and SSDs can be mixed in a mode-2 or mode-4 drawer, but they cannot be mixed within a logical split of the drawer. For example, in a mode-2 drawer with two sets of 12 bays, one set could hold SSDs and one set could hold HDDs, but you cannot mix SSDs and HDDs in the same set of 12 bays.
The indicator feature EHS2 helps IBM Manufacturing understand where SSDs are placed in a mode 2 or a mode 4 EXP24SX. On one mode-2 drawer, use a quantity of one feature EHS2 to have SSDs placed in just half the bays and use two EHS2 features to have SSDs placed in any of the bays. Similarly, on one mode-4 drawer, use a quantity of one, two, three, or four EHS2 features to indicate how many bays can have SSDs. With multiple EXP24SX orders IBM Manufacturing will have to guess which quantity of ESH2 is associated with each EXP24SX. Consider using CSP (#0456) to reduce guessing.
Two and a half inch small form factor (SFF) SAS HDDs and SSDs are supported in the EXP24SX. All drives are mounted on Gen2 carriers/trays and thus named SFF-2 drives. The SFF-2 drives, which are supported on both the existing EXP24S and the newer EXP24SX, are interchangeable. Only 4k byte sector drives are supported in the EXP24SX in fourth quarter 2016. The 5xx byte sector drives are not announced in fourth quarter 2016.
| HDD 10k RPM | HDD 15k RPM | SSD |
|---|---|---|
| 600/571 GB 4k (#ESEV, #ESEU) | 300/283 GB 4k (#ESEZ, #ESFA) | 387 GB 4k (#ES85, #ES86) |
| 1.2/1.1 TB 4k (#ESF3, #ESF2) | 600/571 GB 4k (#ESFP, #ESFN) | 775GB 4k (#ES8C, #ES8D) |
| 1.8/1.7 TB 4k (#ESFT, #ESFS) | 1.55 TB 4k (#ES8F, ES8G) | |
| 1.9 TB 4k RI (#ES80, #ES81) |
EXP24SX drives for feature ELLS (Linux-only) are:
| HDD 10k RPM | HDD 15k RPM | SSD |
|---|---|---|
| 600/571 GB 4k (#ELEV) | 300/283 GB 4k (#ELEZ) | 387 GB 4k (#EL85) |
| 1.2/1.1 TB 4k (#ELF3) | 600/571 GB 4k (#ELFP) | 775GB 4k (#EL8C) |
| 1.8/1.7 TB 4k (#ELFT) | 1.55 TB 4k (#EL8F) | |
| 1.9 TB 4k RI (#EL80) |
The EXP24S and EXP24SX can be mixed on the same server and on the same PCIe3 adapter, but IBM Manufacturing will only build orders that are not mixed unless CSP (#0456) is used. e-config will reflect this per-order limitation. EXP24S, EXP24SX, and EXP12SX can be mixed on the same server. EXP24SX and EXP12SX can be mixed on the same PCIe3 adapter.
The EXP24SX Drawer has many high-reliability design points. The SAS drive bays support hot swap. It has redundant and hot-swap-capable power and fan assemblies. It has dual line cords. It has redundant and hot-swap enclosure service modules (ESMs). It has redundant data paths to all drives. LED indicators on drives, bays, ESMs, and power supplies support problem identification. Plus through the SAS adapters/controllers, drives can be protected with RAID and mirroring and hot-spare capability.
Order two ESLA features for AC power supplies. The enclosure is shipped with adjustable depth rails and can accommodate 19-inch rack depths from 59.5 cm - 75 cm (23.4 in. - 29.5 in.). Slot filler panels are provided for empty bays when initially shipped from IBM.
Operating systems prerequisites are:
- IBM i 7.2 TR5 and IBM i 7.3 TR1, or later
- AIX Version 7.2 with the 7200-01 Technology Level, or later
- AIX Version 7.1 with the 7100-04 Technology Level and Service Pack 3 and APAR IV88680, or later
- AIX Version 6.1 with the 6100-09 Technology Level and Service Pack 8 and APAR IV88679, or later
- AIX Version 7.1 with the 7100-03 Technology Level and Service Pack 8, or later (planned availability January 27, 2017)
- AIX Version 7.2 with the 7200-00 Technology Level and Service Pack 3, or later (planned availability January 27, 2017)
- VIOS 2.2.5.10, or later
- Red Hat Enterprise Linux 6.8, or later
- Red Hat Enterprise Linux 7.2, big endian, or later
- Red Hat Enterprise Linux 7.2, little endian, or later
- SUSE Linux Enterprise Linux 11, Service Pack 4, or later
- SUSE Linux Enterprise Linux 12, Service Pack 1, or later
- Ubuntu 16.04.1, or later
- Bare metal systems (indicated by #EC16):
- Ubuntu Server 16.04.1, or later
Linux notes:
- Linux environments such as PowerVM® (not bare metal and not PowerKVM) are required.
- The latest iprutils package is also required for full support and is available in the IBM Power Tools repository.
EXP12SX SAS Storage Enclosure (#ESLL and #ELLL)
The new EXP12SX is a storage expansion enclosure with twelve 3.5-inch LFF SAS bays. It supports up to 12 hot-swap HDDs in only 2 EIA of space in a 19-inch rack. The EXP12SX SFF bays use LFF Gen1 (LFF-1) carriers/trays. The 4k byte sector drives (#4096 or #4224) are supported. SSDs are not supported.
The EXP12SX Drawer feature ESLL is supported on the Power S814, S822, S824, E850C, E870C, E870, E880C, and E880 servers by AIX, Linux, and VIOS. The EXP24SX Drawer feature ELLL is supported on the Linux-only Power S812L, S822L and S824L servers. Firmware 860, or later, is required.
With AIX/Linux/VIOS, the EXP12SX enclosure can be ordered with four sets of 3 bays (Mode 4), two sets of 6 bays (Mode 2), or one set of 12 bays (Mode 1). The mode setting can be changed in the field using software commands along with a specifically documented procedure.
Important: When changing modes, it is very important that you follow the documented procedures. Improperly changing modes can potentially destroy existing RAID sets, prevent access to existing data, or allow other partitions to access another partition's existing data. Hire an expert to assist if you are not familiar with this type of reconfiguration work.
Four mini-SAS HD narrow ports on the EXP12SX are attached to PCIe Gen3 SAS adapters or attached to an integrated SAS controller in a POWER8 scale-out server such as the Power S814, S822, or S824 server. The following PCIe3 SAS adapters support the EXP12SX:
- PCIe3 RAID SAS Adapter Quad-port 6 Gb x8 (#EJ0J or #EJ0M or #EL3B or #EL59)
- PCIe3 12 GB Cache RAID SAS Adapter Quad-port 6 Gb x8 (#EJ0L)
- PCIe3 12 GB Cache RAID Plus SAS Adapter Quad-port 6 Gb x8 (#EJ14)
Earlier generation PCIe2 or PCIe1 SAS adapters are not supported with the EXP12SX.
The attachment between the EXP12SX and the PCIe3 SAS adapters or integrated SAS controllers is through SAS YO12 or X12 cables. X12 and YO12 cables are designed to support up to 12 Gb. The PCIe Gen3 SAS adapters support up to 6 Gb throughput. The EXP12SX has been designed to support up to 12 Gb throughput if future SAS adapters support that capability. All ends of the YO12 and X12 cables have mini-SAS HD narrow connectors. Fourth quarter 2016 options are:
- X12 cable: 3-meter copper (#ECDJ)
- YO12 cables: 1.5-meter copper (#ECDT), 3-meter copper (#ECDU)
Not attached to the EXP12SX is a new AA12 cable interconnecting a pair of PCIe3 12GB adapters (two #EJ14 or two #EJ0L). These higher-bandwidth cables could support 12 Gb throughput if future adapters support that capability. Copper features ECE0 is 0.6-meter long and ECE3 is 3-meter long.
One no-charge specify code is used with each EXP12SX I/O Drawer (#ELLL/#ESLL) to communicate to IBM configurator tools and IBM Manufacturing which mode setting, adapter, and SAS cable are needed. With this specify code, no hardware is shipped. The physical adapters, controllers, and cables must be ordered with their own chargeable feature numbers. There are more technically supported configurations than represented by these specify codes. IBM Manufacturing and IBM configurator tools such as e-config only understand and support EXP12SX configurations represented by these specify codes.
| Specify | Mode | Adapter/Controller | Cable to Drw | Environment |
|---|---|---|---|---|
| #EJV0 | Mode 1 | CEC SAS Ports | 2 YO12 cables | AIX/Linux/VIOS |
| #EJV1 | Mode 1 | One (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 YO12 cable | AIX/Linux/VIOS |
| #EJV2 | Mode 1 | Two (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 YO12 cables | AIX/Linux/VIOS |
| #EJV3 | Mode 2 | Two (one pair) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJV4 | Mode 2 | Four (two pair) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJV5 | Mode 4 | Four (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJV6 | Mode 2 | One(unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 YO12 cables | AIX/Linux/VIOS |
| #EJV7 | Mode 2 | Two (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 YO12 cables | AIX/Linux/VIOS |
| #EJVF | Mode 1 | Two #EJ14 (one pair) | 2 YO12 cables | AIX/Linux/VIOS |
| #EJVG | Mode 2 | Two #EJ14 (one pair) | 2 X12 cables | AIX/Linux/VIOS |
| #EJVJ | Mode 2 | Four #EJ14 (two pair) | 2 X12 cable | AIX/Linux/VIOS |
| #EJVP | Mode 1 | Two #EJ0L (one pair) | 2 YO12 cables | AIX/Linux/VIOS |
| #EJVR | Mode 2 | Four #EJ0L (one pair) | 2 X12 cables | AIX/Linux/VIOS |
| #EJVS | Mode 2 | Two #EJ0L (one pair) | 2 X12 cable | AIX/Linux/VIOS |
All of the above EXP12SX specify codes assume a full set of adapters and cables able to run all the SAS bays configured. The following specify codes communicate to IBM Manufacturing a lower cost, "partial" configuration is to be configured where the ordered adapters and cables can run only a portion of the SAS bays. The future MES addition of adapters and cables can enable the remaining SAS bays for growth. The following specify codes are used:
| Specify | Mode | Adapter/Controller | Cable to Drw | Environment |
|---|---|---|---|---|
| #EJVA (1/2 of #EJV7) | Mode 2 | One (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 YO12 cables | AIX/Linux/VIOS |
| #EJVB (1/2 of #EJV4) | Mode 2 | One pair #EJ0J/#EJ0M/#EL3B/#EL59 | 1 X12 cable | AIX/Linux/VIOS |
| #EJVC (1/4 of #EJV5) | Mode 4 | One (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 X12 cable | AIX/Linux/VIOS |
| #EJVD (2/4 of #EJV5) | Mode 4 | Two (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 1 X12 cables | AIX/Linux/VIOS |
| #EJVE (3/4 of #EJV5) | Mode 4 | Three (unpaired) #EJ0J/#EJ0M/#EL3B/#EL59 | 2 X12 cables | AIX/Linux/VIOS |
| #EJVH (1/2 of #EJVR) | Mode 2 | Two #EJ14 | 1 X12 cables | AIX/Linux/VIOS |
| #EJVT (1/2 of #EJVS) | Mode 2 | Two #EJ0L (one pair) | 1 X12 cable | AIX/Linux/VIOS |
An EXP12SX Drawer in mode 4 can be attached to two or four SAS controllers and provide a great deal of configuration flexibility. For example, if using unpaired feature EJ0J adapters, these EJ0J adapters could be in the same server in the same partition, same server in different partitions, or even different servers.
An EXP12SX in mode 2 has similar flexibility. If the I/O drawer is in Mode 2, then half of its SAS bays can be controlled by one pair of PCIe3 SAS adapters, such as a 12 GB write cache adapter pair (#EJ14), and the other half can be controlled by a different PCIe3 SAS 12 GB write cache adapter pair or by zero-write-cache PCIe3 SAS adapters.
Note that for simplicity, IBM configurator tools such as e-config assume that the SAS bays of an individual I/O drawer are controlled by one type of SAS adapter. As a client, you have more flexibility than e-config understands.
The 3.5-inch large form factor (LFF) SAS HDDs are supported in the EXP24SX. All drives are mounted on Gen1 carriers/trays and thus named LFF-1 drives. Only 4k byte sector drives are supported in the EXP24SX. The 5xx byte sector drives are not announced or planned. Drives are 7200 rpm and sometimes referred to as nearline. These drives provide excellent cost per gigabyte. Note that formatting or rebuilding arrays on large disk drives can take hours. If higher performance is required, consider higher rpm disks or SSDs in the EXP24SX.
EXP12SX drives for feature ESLL (multi-OS) are the 3.86 TB/4.0 TB 4k 7200 RPM (#ES62) and 7.72 TB/8.0 TB 4k 7200 RPM (#ES64) drives. Drives for feature ELLL (Linux-only) are the 3.86 TB/4.0 TB 4k 7200 RPM (#EL62) and the 7.72 TB/8.0 TB 4k 7200 RPM (#EL64) drives.
The EXP24S and EXP24SX drives can be mixed on the same server and on the same PCIe3 adapter, but IBM Manufacturing will only build orders that are not mixed unless CSP (#0456) is used. e-config will reflect this per-order limitation.
The EXP12SX Drawer has many high-reliability design points. The SAS bays support hot swap. It has redundant and hot-swap power and fan assemblies. It has dual line cords. It has redundant and hot-swap ESMs. It has redundant data paths to all drives. LED indicators on drives, bays, ESMs, and power supplies support problem identification. Plus through the SAS adapters/controllers, drives can be protected with RAID and mirroring and hot-spare capability.
Order two ESLA features for AC power supplies. The enclosure is shipped with adjustable depth rails and can accommodate 19-inch rack depths from 59.5 cm - 75 cm (23.4 in. - 29.5 in.). Slot filler panels are provided for empty bays when initially shipped from IBM.
EXP24S, EXP24SX, and EXP12SX drives can be mixed on the same server. EXP24SX and EXP12SX drives can be mixed on the same PCIe3 adapter.
Operating systems prerequisites are:
- AIX Version 7.2 with the 7200-01 Technology Level, or later
- AIX Version 7.1 with the 7100-04 Technology Level and Service Pack 3 and APAR IV88680, or later
- AIX Version 6.1 with the 6100-09 Technology Level and Service Pack 8 and APAR IV88679, or later
- AIX Version 7.1 with the 7100-03 Technology Level and Service Pack 8, or later (planned availability January 27, 2017)
- AIX Version 7.2 with the 7200-00 Technology Level and Service Pack 3, or later (planned availability January 27, 2017)
- VIOS 2.2.5.10, or later
- Red Hat Enterprise Linux 6.8, or later
- Red Hat Enterprise Linux 7.2, big endian, or later
- Red Hat Enterprise Linux 7.2, little endian, or later
- SUSE Linux Enterprise Linux 11, Service Pack 4, or later
- SUSE Linux Enterprise Linux 12, Service Pack 1, or later
- Ubuntu 16.04.1, or later
IBM i is not supported.
Linux notes:
- Environments such as PowerVM (not PowerKVM, not bare metal).
- The latest iprutils package is also required for full support and is available in the IBM Power Tools repository.
IBM PCIe3 Crypto Coprocessor 4767 (#EJ32/#EJ33)
This secure-key adapter provides both cryptographic coprocessor and cryptographic accelerator functions in a single PCIe card. The adapter is well suited to applications that require high-speed, security-sensitivity, RSA acceleration, cryptographic operations for data encryption and digital signing, secure management, and use of cryptographic keys or custom cryptographic applications. It provides secure storage of cryptographic keys in a tamper-resistant hardware security module designed to meet FIPS 140-2 level 4 security requirements. The adapter is a PCIe Gen1 x4 full-height short card. The adapter runs in dedicated mode only (no PowerVM virtualization).
Features EJ32 and EJ33 represent the same physical card with the same CCIN of 4767. Different feature numbers are used to indicate if a blind-swap cassette is used and its type. Feature EJ32 indicates no blind-swap cassette. Feature EJ33 indicates a Gen3 blind-swap cassette.
PCIe Cryptographic Coprocessor 4767 builds on the solid base of the previous generation crypto adapter (#EJ27, #EJ28, #EJ29). It offers all the existing adapter's capabilities and more. Adapter highlights:
- Binary compatibility with applications written to use previous generation cards.
- Significantly increased performance compared to the previous generation.
- Hardware-accelerated Elliptic Curve Cryptography (ECC) key generation, along with digital signature generation and verification using the Elliptic Curve Digital Signature Algorithm (ECDSA).
- Enhanced firmware load security using ECDSA signatures.
- New financial services support verbs for Visa Data Secure Platform with Point to Point Encryption (VDSP with P2PE), which includes Visa Format-Preserving Encryption (FPE).
- Access-control tracking can be performed on a role ID basis to gather information about which access control points are queried by applications.
- Users of the HSM 4767 have enhanced logon control capabilities, including stricter passphrase length and character requirements and the ability for users to change their own passphrases.
- The ability to encipher and decipher data using the AES algorithm in Galois/Counter Mode (GCM).
- The creation of symmetric key material from a pair of Elliptic Curve Cryptography (ECC) keys using the Elliptic Curve Diffie-Hellman (ECDH) protocol and the ANSI-9.63-KDF key derivation method as specified in ANSI X9.63-2011.
- Newly selectable RSA public exponents 5, 17, and 257. This addition completes the series of the first five Fermat numbers. The first five Fermat numbers are known to be prime.
Feature EJ32 is supported in the Power S824L, S814, S824, and E850 servers, and feature EJ33 is supported in the Power S812L, S822L, S824L, S822, S814, S824, E880C, E880, E870C, E870, and E850 servers.
The PCIe Cryptographic Coprocessor adapter is supported by operating systems as follows:
- Environments such as PowerVM
(not PowerKVM, not bare metal)
- Red Hat Enterprise Linux (RHEL) 7.2, little endian, or later, with additional device driver provided through IBM Fix Central
- Ubuntu Server 16.04.1, or later, with additional device driver provided through IBM Fix Central
- Bare metal systems (indicated by #EC16)
- Not supported
- PowerKVM 3.1 systems (indicated by #EC40) or PowerKVM 2.1 (#EC20):
- Not supported
- IBM i 7.2 TR5 and IBM i 7.3 TR1, or later
- AIX Version 7.2 with the 7200-01 Technology Level, or later
- AIX Version 7.1 with the 7100-04 Technology Level and Service Pack 3 and APAR IV88680, or later
- AIX Version 6.1 with the 6100-09 Technology Level and Service Pack 8 and APAR IV88679, or later
- AIX Version 7.1 with the 7100-03 Technology Level and Service Pack 8, or later (planned availability January 27, 2017)
- AIX Version 7.2 with the 7200-00 Technology Level and Service Pack 3, or later (planned availability January 27, 2017)
PCIe3 2-Port 100 GbE (NIC and RoCE) QSFP28 Adapter x16 (#EC3M / #EC3L)
A high-performance 100 Gb Ethernet adapter offering both NIC and RoCE in a PCIe Gen3 Ethernet x16 adapter provides two 100 Gb QSFP28 ports. The adapter supports both NIC and IBTA RoCE standards. RoCE is Remote Direct Memory Access (RDMA) over Converged Ethernet. Using RoCE, the adapter can support significantly greater bandwidth with low latency and minimize CPU overhead by more efficiently using memory access. This offloads the CPU from I/O networking tasks, improving performance and scalability.
IBM offers either passive copper twinax cables up to 2 meter in length or active optical cables up to 100 meters in length. See features EB5J - EB5M for a 0.5M, 1.0M, 1.5M, and 2.0M copper cable. See features EB5R - EB5Y for a 3M, 5M, 10M, 15M, 20M, 30M, 50M, or 100M active optical cable. Transceivers are included on each end of these QSFP28 cables. As an alternative to these supported cables, you may choose to order an IBM qualified and supported QSFP28 optical transceiver (#EB59) to put into the adapter and provide your own 100GE optical cabling with your own QSP28 optical transceiver for the other end.
Either one or both of the adapter's two QSP28 ports can be populated. When two ports are filled, both can have copper cables, both can have optical cables, or one can be copper and one can be optical.
Features EC3L and EC3M have identical electronics and function and CCIN (2CEC), but have different tail stock brackets. Feature EC3L is low profile and feature EC3M is full high. The adapter is based on a Mellanox ConnectX-4 adapter.
Feature EC3M is supported in the Power S824L, S814, S824, and E850C servers, and feature EC3L is supported in the Power S821L, S822L, S822, E880C, E880, E870C, and E870 servers.
The PCIe3 2-Port 100 GbE (NIC and RoCE) QSFP28 Adapter is supported by operating systems as follows:
- IBM i supported only with VIOS.
- Environments such as PowerVM
(not PowerKVM, not bare metal)
- Red Hat Enterprise Linux 7.2, little endian, or later, with Mellanox OFED 3.3, or later
- Red Hat Enterprise Linux 7.2, big endian, or later, with Mellanox OFED 3.3, or later
- Ubuntu 16.04.1, or later, with Mellanox OFED 3.3, or later
- Bare metal systems (indicated by #EC16)
- Red Hat Enterprise Linux 7.2, little endian, or later, with Mellanox OFED 3.3, or later
- Ubuntu 16.04.1, or later, with Mellanox OFED 3.3, or later
- PowerKVM 3.1 systems (indicated by #EC40) or PowerKVM 2.1 (#EC20): Not supported
Newest level of AIX 7.2 supports both Ethernet NIC and RoCE. Earlier levels of AIX support just NIC.
- AIX Version 7.2 with the 7200-01 Technology Level, or later (NIC and RoCE)
- AIX Version 7.1 with the 7100-04 Technology Level and Service Pack 3 and APAR IV88680, or later (NIC only)
- AIX Version 6.1 with the 6100-09 Technology Level and Service Pack 8 and APAR IV88679, or later (NIC only)
- AIX Version 7.1 with the 7100-03 Technology Level and Service Pack 8, or later (planned availability January 27, 2017) (NIC only)
- AIX Version 7.2 with the 7200-00 Technology Level and Service Pack 3, or later (planned availability January 27, 2017) (NIC only)
- VIOS 2.2.5.10, or later
Note: VIOS only supports the Ethernet capability.
100 Gb EDR InfiniBand (#EC3T / #EC3E) Adapters for Power E850C, E880, E880C, E870, and E870C
The previously announced 1-port and 2-port 100 Gb EDR InfiniBand (#EC3T/#EC3E) Adapters are now supported on the Power E850C, E880, E880C, E870, and E870C servers.
Supported OS levels/environments:
- AIX and VIOS are not supported.
- IBM i not supported.
- Red Hat Enterprise Linux 7.2, little endian, or later, with Mellanox OFED 3.2, or later.
- Red Hat Enterprise Linux 7.2, big endian, or later, with Mellanox OFED 3.2, or later.
- Ubuntu 14.04.4, or later, with Mellanox OFED 3.2, or later.
- SUSE Linux Enterprise Server 11, Service Pack 4, or later, with Mellanox OFED 3.2, or later.
- SUSE Linux Enterprise Server 12, Service Pack 1, or later, with Mellanox OFED 3.2, or later.
- Ubuntu 16.04, or later, with Mellanox OFED 3.3, or later.
PCIe Gen3 I/O Drawer Cabling Option
A new copper cabling option (#ECCS) is available for the scale-out servers and for the Power E850 server. The cable option offers a much lower-cost connection between the server and the PCIe Gen3 I/O drawer fanout modules. The currently available Active Optical cable (AOC) offers much longer length cables, providing rack placement flexibility. Plus AOC cables are much thinner and have tighter bend radius and thus are much easier to cable in the rack.
The 3M Copper CXP Cable Pair (#ECCS) has the same performance and same reliability, availability, and serviceability (RAS) characteristics as the AOC cables. The cable is similar in thickness and stiffness to the cabling used between a POWER7 server and a PCIe Gen1 I/O drawer. One copper cable length of 3 m is offered. Note that the cable management arm of the scale-out and E850 servers requires about 1 m of cable.
Like the AOC cable pair, the copper pair is cabled in the same manner. One cable attaches to the top CXP port in the PCIe adapter in the x16 PCIe slot in the server system unit and then attaches to the top CXP port in the fanout module in the I/O drawer. Its cable pair attaches to the bottom CXP port of the same PCIe adapter and to the bottom CXP port of the same fanout module. Note that the PCIe adapter providing the CXP ports on the server was named a PCIe3 "Optical" Cable Adapter. In hindsight, this naming was unfortunate as the adapter's CXP ports are not unique to optical. But at the time, optical cables were the only connection option planned.
Copper and AOC cabling can be mixed on the same server. However, they cannot be mixed on the same PCIe Gen3 I/O drawer or mixed on the same fanout module.
Copper cables have the same operating system software prerequisites as AOC cables but require Firmware 860, or later.
PCIe2 2-Port 8 Gb Fibre Channel Adapter
The PCIe2 2-Port 8 Gb Fibre Channel Adapter (#EL5Y/#EL5Z) offers the same functionality as the existing PCIe 2-Port 8 Gb Fibre Channel Adapter (#EN0F/#EN0G) but at a lower price for Linux-only servers. See the IBM System Storage® Interoperation Center (SSIC) website for supported combinations.
Feature EL5Y is low profile, and feature EL5Z is for full-high slots.
The PCIe2 2-Port 8 Gb Fibre Channel Adapter is supported by these operating systems:
- Red Hat Enterprise Linux 7.2, little endian, or later
- Red Hat Enterprise Linux 7.2, big endian, or later
- Red Hat Enterprise Linux 6.8, or later
- Ubuntu 16.04, or later
- SUSE Linux Enterprise Server 11, Service Pack 4, or later
- SUSE Linux Enterprise Server 12, Service Pack 1, or later
Note: Assignment to the VIOS requires VIOS 2.2.3.70, or later, VIOS 2.2.4.20, or later, or VIOS 2.2.5 or later.
High-Function (Switched and Monitored) PDUs
New PDUs (power distribution units) provide switching, better monitoring, and 50% more C19 receptacles than current Power System PDUs. Depending on country wiring standards either two or four full-price feature codes are orderable.
| 208 V 3-phase delta | 200 V - 240 V 1-phase or 3-phase wye | |
|---|---|---|
| 12 x C13 | #EPTQ | #EPTN |
| 9 x C19 | #EPTL | #EPTJ |
These PDUs can be mounted vertically in rack-side pockets or they can be mounted horizontally. If mounted horizontally, they each use 1 EIA (1U) of rack space. See feature EPTH for horizontal mounting hardware, which is used when IBM Manufacturing doesn't automatically factory-install the PDU. Two RJ45 ports on the front of the PDU enable the client to monitor each receptacle's electrical power usage and to remotely switch any receptacle on or off. The PDU is shipped with a generic PDU password, and IBM strongly urges clients to change it upon installation. The new PDUs described above do provide the same low price as the low-function 12xC13 PDU feature (#7188).
High-Function 9xC19 PDU: Switched, Monitoring feature (#EPTJ/#EPTG) provides an intelligent, switched 200-240 volt AC PDU with nine C19 receptacles on the front of the PDU. The PDU is mounted on the rear of the rack, making the nine C19 receptacles easily accessible. Each receptacle has a 20 amp circuit breaker. Depending on country wiring standards, the PDU is single-phase or three-phase wye. See three-phase features EPTK and EPTL for countries that do not use wye wiring.
Features EPTG and EPTJ are identical PDUs. Up to one lower-priced feature EPTG can be ordered with a 7014-T42/T00 rack in place of a no-charge feature (#9188) PDU. Device power cords with a C20 plug connect to C19 PDU receptacles and are ordered separately. One country-specific wall line cord is also ordered separately and attaches to a UTG524-7 connector on the front of the PDU. Supported line cords include features 6489, 6491, 6492, 6653, 6654, 6655, 6656, 6657, 6658, and 6667. There are also three C13 receptacles on the front of the PDU positioned toward the middle of the rack. These are generally not easily accessed and therefore IBM does not generally recommend their use.
High-Function 9xC19 PDU 3-Phase: Switched, Monitoring feature (#EPTL/#EPTK) provides an intelligent, switched 208 volt 3-phase AC delta PDU with nine C19 receptacles on the front of the PDU. The PDU is mounted on the rear of the rack, making the nine C19 receptacles easily accessible. Each receptacle has a 20 amp circuit breaker.
Features EPTK and EPTL are identical PDUs. Up to one lower-priced feature EPTK can be ordered with a 7014-T42/T00 rack in place of a no-charge feature (#9188) PDU. Device power cords with a C20 plug connect to C19 PDU receptacles and are ordered separately. One wall line cord is provided with the PDU (no separate feature number) and has a IEC60309 60A plug (3P+G). The PDU supports up to 48 amps. There are also three C13 receptacles on the front of the PDU positioned toward the middle of the rack. These are generally not easily accessed and therefore IBM does not generally recommend their use.
High-Function 12xC13 PDU: Switched, Monitoring feature (#EPTN/#EPTM) provides an intelligent, switched 200 - 240 V AC PDU with twelve C13 receptacles on the front of the PDU. The PDU is mounted on the rear of the rack, making the twelve C13 receptacles easily accessible. Each receptacle has a 20 amp circuit breaker. Depending on country wiring standards, the PDU is single-phase or three-phase wye. See three-phase features EPTK and EPTL for countries that do not use wye wiring.
Features EPTM and EPTN are identical PDUs. Up to one lower-priced feature EPTM can be ordered with a 7014-T42/T00 rack in place of a no-charge feature (#9188) PDU. Device power cords with a C14 plug connect to C13 PDU receptacles and are ordered separately. One country-specific wall line cord is also ordered separately and attaches to a UTG524-7 connector on the front of the PDU. Supported line cords include features 6489, 6491, 6492, 6653, 6654, 6655, 6656, 6657, 6658, and 6667.
High-Function 12xC13 PDU 3-Phase: Switched, Monitoring feature (#EPTQ/#EPTP) provides an intelligent, switched 208 volt 3-phase AC delta PDU with twelve C13 receptacles on the front of the PDU. The PDU is mounted on the rear of the rack, making the twelve C13 receptacles easily accessible. Each receptacle has a 20 amp circuit breaker.
Features EPTP and EPTQ are identical PDUs. Up to one lower-price feature EPTQ can be ordered with a 7014-T42/T00 rack in place of a no-charge feature (#9188) PDU. Device power cords with a C14 plug connect to C13 PDU receptacles and are ordered separately. One wall line cord is provided with the PDU (no separate feature number) and has a IEC60309 60A plug (3P+G). The PDU supports up to 48 amps.
PCIe3 NVMe Flash Adapter for POWER8 E850 server
The full potential of nonvolatile flash memory of the PCIe3 NVMe Flash Adapter is now available for the POWER8 enterprise IBM Power E850 server for Linux workloads. Architected for performance, the PCIe3 NVMe Adapter provides the extreme performance capabilities to help meet the performance demands of cloud, internet portal data centers, and other high-performance computing environments. It leverages Linux industry-standard software and NVMe drivers to provide a streamlined protocol that is efficient and scalable.
- PCIe3 1.6 TB NVMe Flash Adapter (#EC55) and PCIe3 3.2 TB NVMe Flash Adapter (#EC57) are supported in the 4U Power E850 server (8408-44E and 8408-E8E).
The PCIe3 NVMe Flash Adapter is supported only in the system unit or system node. It is not supported in the PCIe Gen3 I/O drawer. Any of the PCIe slots in the Power E850 system unit can be used to hold a NVMe PCIe adapter. Placement preference will be in a x16 slot or a direct x8 slot for this adapter, and placement in a shared x slot will be least preferred. This provides up to 32 TB of NVMe flash memory capacity. The following adapter maximums apply to either 1.6 TB or 3.2 TB card (or a mix):
- Up to 10 NVMe Flash Adapters on a 4-socket-populated E850
- Up to 8 NVMe Flash Adapters on a 3-socket-populated E850
- Up to 6 NVMe Flash Adapters on a 2-socket-populated E850
Supported OS levels/environments:
- Environments such as PowerVM
(not PowerKVM, not bare metal)
- AIX is not supported.
- Red Hat Enterprise Linux 7.2, big endian, or later, with all available maintenance updates.
- Red Hat Enterprise Linux (RHEL) 7.2, little endian, or later, with all available maintenance updates.
- SUSE Linux Enterprise Server (SLES) 11, Service Pack 4, or later, with all available maintenance updates.
- Ubuntu Server 16.04, or later.
- Bare metal systems (indicated by #EC16)
- IBM Power Systems S822LC (8335-GCA and 8335-GTB)
- PowerKVM 3.1 systems (indicated by #EC40) or PowerKVM 2.1 (#EC20):
- Not supported
The nvme-cli tool is available for download for Red Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES) from the IBM Power Tools repository at the IBM Service and productivity tools for Linux on Power servers website.
Notes:
- Booting from this device is supported by Ubuntu Server 16.04, or later.
- Assignment to the VIOS not supported.
Back to top
|
| Statement of general direction |
|
IBM plans to add the new memory and I/O features announced on the Power E850C (8408-44E) to the existing Power E850 server (8408-E8E) in a future firmware Service Pack in first half of 2017.
Features planned for support include 16 GB, 32 GB, and 64 GB DDR4 CDIMMs, EXP12SX and EXP24SX SAS Expansion Units, 100 GbE adapter, 100 Gb EDR InfiniBand adapter and PCIe Cryptographic Adapter.
IBM's statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM's sole discretion. Information regarding potential future products is intended to outline our general product direction and it should not be relied on in making a purchasing decision. The information mentioned regarding potential future products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. Information about potential future products may not be incorporated into any contract. The development, release, and timing of any future features or functionality described for our products remain at our sole discretion.
Back to top
|
| Product number |
|
The following are newly announced features on the specific models of the IBM Power Systems 7014, 7965, 8001, 8247, 8284, 8286, 8335, 8348, 8408, 9080, and 9119 machine type:
New features available October 25, 2016
Machine Feature
Description type Model number
SAP HANA TRACKING FEATURE 9080 MHE EHKV
9080 MME
1.8m (6-ft) Power Cord, 200-240V/10A, C13, C14 8001 12C EKLM
8001 22C
The following are newly announced features on the specific models of the IBM Power Systems 7014, 7965, 8001, 8247, 8284, 8286, 8335, 8348, 8408, 9080, and 9119 machine type:
New features available November 18, 2016
Machine Feature
Description type Model number
CBU for PowerHA Specify 9080 MME EB3K
9119 MME
0.5M EDR IB / 100GbE Copper Cable QSFP 9080 MHE EB50
9080 MME
9119 MHE
9119 MME
1.0M EDR IB / 100GbE Copper Cable QSFP 9080 MHE EB51
9080 MME
9119 MHE
9119 MME
2.0M EDR IB / 100GbE Copper Cable QSFP 9080 MHE EB52
9080 MME
9119 MHE
9119 MME
1.5M EDR IB / 100GbE Copper Cable QSFP 9080 MHE EB54
9080 MME
9119 MHE
9119 MME
100Gb Optical Transceiver QSFP28 8247 21L EB59
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
3M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5A
9080 MME
9119 MHE
9119 MME
5M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5B
9080 MME
9119 MHE
9119 MME
10M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5C
9080 MME
9119 MHE
9119 MME
15M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5D
9080 MME
9119 MHE
9119 MME
20M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5E
9080 MME
9119 MHE
9119 MME
30M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5F
9080 MME
9119 MHE
9119 MME
50M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5G
9080 MME
9119 MHE
9119 MME
100M EDR IB / 100GbE Optical Cable QSFP 9080 MHE EB5H
9080 MME
9119 MHE
9119 MME
0.5M 100GbE Copper Cable QSFP28 8247 21L EB5J
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
1.0M 100GbE Copper Cable QSFP28 8247 21L EB5K
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
1.5M 100GbE Copper Cable QSFP28 8247 21L EB5L
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
2.0M 100GbE Copper Cable QSFP28 8247 21L EB5M
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
3M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5R
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
5M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5S
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
10M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5T
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
15M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5U
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
20M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5V
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
30M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5W
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
50M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5X
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
100M 100GbE Optical Cable QSFP28 (AOC) 8247 21L EB5Y
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
PCIe3 LP 2-port 100Gb EDR IB Adapter x16 9080 MHE EC3E
9080 MME
9119 MHE
9119 MME
PCIe3 LP 2-port 100GbE (NIC& RoCE) QSFP28
Adapter x16 8247 21L EC3L
8247 22L
8284 22A
9080 MHE
9080 MME
9119 MHE
9119 MME
PCIe3 2-port 100GbE (NIC&RoCE) QSFP28 Adapter x16 8247 42L EC3M
8286 41A
8286 42A
PCIe3 LP 1-port 100Gb EDR IB Adapter x16 9080 MHE EC3T
9080 MME
9119 MHE
9119 MME
PCIe3 1.6TB NVMe Flash Adapter 8408 E8E EC55
PCIe3 3.2TB NVMe Flash Adapter 8408 E8E EC57
KVM on Power Path 8247 21L EC70
8247 22L
8247 42L
8335 GCA
8348 21C
3M Copper CXP Cable Pair for PCIe3 Expansion
Drawer 8247 21L ECCS
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
8408 E8E
3.0M SAS X12 Cable (Two Adapter to Enclosure) 8247 21L ECDJ
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
1.5M SAS YO12 Cable (Adapter to Enclosure) 8247 21L ECDT
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
3.0M SAS YO12 Cable (Adapter to Enclosure) 8247 21L ECDU
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
0.6M SAS AA12 Cable (Adapter to Adapter) 8247 21L ECE0
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
3.0M SAS AA12 Cable (Adapter to Adapter) 8247 21L ECE3
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Boot Drive / Load Source in EXP12SX Specify (in
#ESLL or #ELLL) 8247 21L EHR1
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Boot Drive / Load Source in EXP24SX Specify (in
#ESLS or #ELLS) 8247 21L EHR2
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
SSD Placement Indicator - #ESLS/#ELLS 8247 21L EHS2
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
PCIe3 Crypto Coprocessor no BSC 4767 8247 42L EJ32
8286 41A
8286 42A
PCIe3 Crypto Coprocessor BSC-Gen3 4767 8247 21L EJ33
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & CEC SAS Ports & (2)YO12 for
EXP12SX #ESLL/ELLL 8247 21L EJV0
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
Specify Mode-1 & (1)EJ0J/EJ0M/EL3B/EL59 &
(1)YO12 for EXP12SX #ESLL/ELLL 8247 21L EJV1
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & (2)EJ0J/EJ0M/EL3B/EL59 &
(2)YO12 for EXP12SX #ESLL/ELLL 8247 21L EJV2
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP12SX #ESLL/ELLL 8247 21L EJV3
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (4)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP12SX #ESLL/ELLL 8247 21L EJV4
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (4)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP12SX #ESLL/ELLL 8247 21L EJV5
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (1)EJ0J/EJ0M/EL3B/EL59 &
(2)YO12 for EXP12SX #ESLL/ELLL 8247 21L EJV6
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0J/EJ0M/EL3B/EL59 &
(2)YO12 for EXP12SX #ESLL/ELLL 8247 21L EJV7
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (1)EJ0J/EJ0M/EL3B/EL59 &
(1)YO12 for EXP12SX #ESLL/ELLL 8247 21L EJVA
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0J/EJ0M/EL3B/EL59 & (1)X12
for EXP12SX #ESLL/ELLL 8247 21L EJVB
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (1)EJ0J/EJ0M/EL3B/EL59 & (1)X12
for EXP12SX #ESLL/ELLL 8247 21L EJVC
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (2)EJ0J/EJ0M/EL3B/EL59 & (1)X12
for EXP12SX #ESLL/ELLL 8247 21L EJVD
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (3)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP12SX #ESLL/ELLL 8247 21L EJVE
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & (2)EJ14 & (2)YO12 for EXP12SX
#ESLL/ELLL 8247 21L EJVF
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ14 & (2)X12 for EXP12SX
#ESLL/ELLL 8247 21L EJVG
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ14 & (1)X12 for EXP12SX
#ESLL/ELLL 8247 21L EJVH
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (4)EJ14 & (2)X12 for EXP12SX
#ESLL/ELLL 8247 21L EJVJ
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & (2)EJ0L & (2)YO12 for EXP12SX
#ESLL/ELLL 8247 21L EJVP
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (4)EJ0L & (2)X12 for EXP12SX
#ESLL/ELLL 8247 21L EJVR
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0L & (2)X12 for EXP12SX
#ESLL/ELLL 8247 21L EJVS
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0L& (1)X12 for EXP12SX
#ESLL/ELLL 8247 21L EJVT
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & CEC SAS Ports & (2)YO12 for
EXP24SX #ESLS/ELS 8247 21L EJW0
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
Specify Mode-1 & (1)EJ0J/EJ0M/EL3B/EL59 &
(1)YO12 for EXP24SX #ESLS/ELLS 8247 21L EJW1
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & (2)EJ0J/EJ0M/EL3B/EL59 &
(2)YO12 for EXP24SX #ESLS/ELLS 8247 21L EJW2
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP24SX #ESLS/ELLS 8247 21L EJW3
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (4)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP24SX #ESLS/ELLS 8247 21L EJW4
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (4)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP24SX #ESLS/ELLS 8247 21L EJW5
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (1)EJ0J/EJ0M/EL3B/EL59 &
(2)YO12 for EXP24SX #ESLS/ELLS 8247 21L EJW6
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0J/EJ0M/EL3B/EL59 &
(2)YO12 for EXP24SX #ESLS/ELLS 8247 21L EJW7
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (1)EJ0J/EJ0M/EL3B/EL59 &
(1)YO12 for EXP24SX #ESLS/ELLS 8247 21L EJWA
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0J/EJ0M/EL3B/EL59 & (1)X12
for EXP24SX #ESLS/ELLS 8247 21L EJWB
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (1)EJ0J/EJ0M/EL3B/EL59 & (1)X12
for EXP24SX #ESLS/ELLS 8247 21L EJWC
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (2)EJ0J/EJ0M/EL3B/EL59 & (1)X12
for EXP24SX #ESLS/ELLS 8247 21L EJWD
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-4 & (3)EJ0J/EJ0M/EL3B/EL59 & (2)X12
for EXP24SX #ESLS/ELLS 8247 21L EJWE
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & (2)EJ14 & (2)YO12 for EXP24SX
#ESLS/ELLS 8247 21L EJWF
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ14 & (2)X12 for EXP24SX
#ESLS/ELLS 8247 21L EJWG
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ14 & (1)X12 for EXP24SX
#ESLS/ELLS 8247 21L EJWH
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (4)EJ14 & (2)X12 for EXP24SX
#ESLS/ELLS 8247 21L EJWJ
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-1 & (2)EJ0L & (2)YO12 for EXP24SX
#ESLS/ELLS 8247 21L EJWP
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (4)EJ0L & (2)X12 for EXP24SX
#ESLS/ELLS 8247 21L EJWR
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0L & (2)X12 for EXP24SX
#ESLS/ELLS 8247 21L EJWS
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Specify Mode-2 & (2)EJ0L& (1)X12 for EXP24SX
#ESLS/ELLS 8247 21L EJWT
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
PCIe2 LP 8Gb 2-Port Fibre Channel Adapter 8247 21L EL5Y
8247 22L
PCIe2 8Gb 2-Port Fibre Channel Adapter 8247 21L EL5Z
8247 22L
8247 42L
3.82-4.0 TB 7200 RPM 4K SAS LFF-1 Nearline Disk
Drive (Linux) 8247 21L EL62
8247 22L
8247 42L
7.72-8.0 TB 7200 RPM 4K SAS LFF-1 Nearline Disk
Drive (Linux) 8247 21L EL64
8247 22L
8247 42L
EXP12SX SAS Storage Enclosure 8247 21L ELLL
8247 22L
8247 42L
EXP24SX SAS Storage Enclosure 8247 21L ELLS
8247 22L
8247 42L
Quantity 150 of #EL62 3.86-4.0 TB 7200 rpm 4k
LFF-1 Disk 8247 21L ELR2
8247 22L
8247 42L
Quantity 150 of #EL64 7.72-8.0 TB 7200 rpm 4k
LFF-1 Disk 8247 21L ELR4
8247 22L
8247 42L
16 GB DDR4 Memory 8247 21L EM8P
8247 22L
8284 22A
32 GB DDR4 Memory 8247 21L EM8Q
8247 22L
8284 22A
64 GB DDR4 Memory 8247 21L EM8R
8247 22L
8284 22A
64 GB DDR4 Memory (4x16GB CDIMMs) 9080 MHE EM8U
9080 MME
9119 MHE
9119 MME
128 GB DDR4 Memory (4x32GB CDIMMs) 9080 MHE EM8V
9080 MME
9119 MHE
9119 MME
256 GB DDR4 Memory (4x64GB CDIMMs) 9080 MHE EM8W
9080 MME
9119 MHE
9119 MME
512 GB DDR4 Memory (4x128GB CDIMMs) 9080 MHE EM8X
9080 MME
9119 MHE
9119 MME
16 GB DDR4 Memory 8247 42L EM91
8286 41A
8286 42A
32 GB DDR4 Memory 8247 42L EM92
8286 41A
8286 42A
64 GB DDR4 Memory 8247 42L EM93
8286 41A
8286 42A
128 GB DDR4 Memory 8247 42L EM94
8286 41A
8286 42A
CBU for Power Enterprise Systems 4.02 GHz,
32-core POWER8 processor 9080 MME EPBW
9119 MME
CBU for Power Enterprise Systems 4.19 GHz,
40-core POWER8 processor 9119 MME EPBX
Horizontal PDU Mounting Hardware 8247 21L EPTH
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
8408 E8E
9080 MHE
9080 MME
9119 MHE
9119 MME
High Function 9xC19 PDU: Switched, Monitoring 8247 21L EPTJ
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
8408 E8E
9080 MHE
9080 MME
9119 MHE
9119 MME
High Function 9xC19 PDU 3-Phase: Switched,
Monitoring 8247 21L EPTL
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
8408 E8E
9080 MHE
9080 MME
9119 MHE
9119 MME
High Function 12xC13 PDU: Switched, Monitoring 8247 21L EPTN
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
8408 E8E
9080 MHE
9080 MME
9119 MHE
9119 MME
High Function 12xC13 PDU 3-Phase: Switched,
Monitoring 8247 21L EPTQ
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
8408 E8E
9080 MHE
9080 MME
9119 MHE
9119 MME
Quantity 150 of #ES62 3.86-4.0 TB 7200 rpm 4k
LFF-1 Disk 8284 22A EQ62
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Quantity 150 of #ES64 7.72-8.0 TB 7200 rpm 4k
LFF-1 Disk 8284 22A EQ64
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
Rack Content Specify EXP12SX #ESLL/#ELLL 2-EIA/2U 7014 B42 ERC0
7014 T00
7014 T42
7965 94Y
Rack Content Specify EXP24SX #ESLS/#ELLS 2-EIA/2U 7014 B42 ERC1
7014 T00
7014 T42
7965 94Y
3.86-4.0 TB 7200 RPM 4K SAS LFF-1 Nearline Disk
Drive (AIX/Linux) 8284 22A ES62
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
7.72-8.0 TB 7200 RPM 4K SAS LFF-1 Nearline Disk
Drive (AIX/Linux) 8284 22A ES64
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
283GB 15K RPM SAS SFF-3 Disk 5xx Block 8286 41A ESDV
283GB 15K RPM SAS SFF-3 Disk 4K Block 8286 41A ESFG
Specify AC Power Supply for EXP12SX/EXP24SX
Storage Enclosure 8247 21L ESLA
8247 22L
8247 42L
8284 22A
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
EXP12SX SAS Storage Enclosure 8284 22A ESLL
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
EXP24SX SAS Storage Enclosure 8284 22A ESLS
8286 41A
8286 42A
9080 MHE
9080 MME
9119 MHE
9119 MME
The following is a newly announced feature on the specific models of the IBM Power Systems 7014, 7965, 8001, 8247, 8284, 8286, 8335, 8348, 8408, 9080, and 9119 machine type:
New feature available December 9, 2016
Machine Feature
Description type Model number
RDX USB Top Mount Docking Station for Removable Cartridge 8286 41A EUA3
Feature conversions
The existing components being replaced during a model or feature conversion become the property of IBM and must be returned.
Feature conversions are always implemented on a "quantity of one for quantity of one" basis. Multiple existing features may not be converted to a single new feature. Single existing features may not be converted to multiple new features.
The following conversions are available to customers:
Feature conversions for 8286-41A adapter features:
Return
From FC: To FC: parts
EJ32 - PCIe3 Crypto EJ33 - PCIe3 Crypto No Coprocessor no BSC 4767 Coprocessor BSC-Gen3 4767
Feature conversions for 8286-42A adapter features:
Return
From FC: To FC: parts
EJ32 - PCIe3 Crypto EJ33 - PCIe3 Crypto No Coprocessor no BSC 4767 Coprocessor BSC-Gen3 4767
Feature conversions for 8408-E8E adapter features:
Return
From FC: To FC: parts
EJ32 - PCIe3 Crypto EJ33 - PCIe3 Crypto No Coprocessor no BSC 4767 Coprocessor BSC-Gen3 4767
Feature conversions for 9117-MMD to 9080-MHE memory features:
Return
From FC: To FC: parts
5600 - 0/32GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
Feature conversions for 9117-MMD to 9080-MME memory features:
Return
From FC: To FC: parts
EM40 - 0/32GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7+ CoD Memory
EM40 - 0/32GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
EM40 - 0/32GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM40 - 0/32GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
Feature conversions for 9117-MMD to 9119-MHE memory features:
Return
From FC: To FC: parts
5600 - 0/32GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
Feature conversions for 9117-MMD to 9119-MME memory features:
Return
From FC: To FC: parts
EM40 - 0/32GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7+ CoD Memory
EM40 - 0/32GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
EM40 - 0/32GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM40 - 0/32GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
EM41 - 0/64GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
Feature conversions for 9179-MHD to 9080-MHE memory features:
Return
From FC: To FC: parts
5600 - 0/32GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
Feature conversions for 9179-MHD to 9119-MHE memory features:
Return
From FC: To FC: parts
5600 - 0/32GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8U - 64 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x16GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8V - 128 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x32GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8W - 256 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x64GB CDIMMs)
POWER7+ CoD Memory
5564 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5600 - 0/32GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X8GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5601 - 0/64GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X16GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
5602 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7 CoD Memory
EM42 - 0/128GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X32GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
EM44 - 0/256GB DDR3 Memory EM8X - 512 GB DDR4 Memory Yes
(4X64GB) DIMMS - 1066 MHz - (4x128GB CDIMMs)
POWER7+ CoD Memory
Back to top
|
| Business Partner information |
|
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld® ID and password are required (use IBMid).
Back to top
|
| Publications |
|
No publications are shipped with the announced products.
To access the IBM Publications Center Portal, go to the IBM Publications Center website.
The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. A large number of publications are available online in various file formats, which can currently be downloaded.
Back to top
|
| Services |
|
Global Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an on-demand business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or go to the IBM Global Technology Services® website.
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or go to the Resiliency Services website.
Details on education offerings related to specific products can be found on the IBM authorized training website.
Back to top
|
| Technical information |
|
Specified operating environment
Physical specifications
For physical specifications, refer to the Sales Manual.
To assure installability and serviceability in non-IBM industry-standard racks, review the installation planning information for any product-specific installation requirements.
Planning information
Cable orders
No cables required.
Security, auditability, and control
The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
Back to top
|
| IBM Electronic Services |
|
IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.
The Electronic Services news page is a single internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.
The Electronic Service Agent™ is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server.
To learn how Electronic Services can work for you, go to the IBM Electronic Support website.
Back to top
|
| Terms and conditions |
|
Equal to the volume commitment discount
Yes
This feature assumes the same warranty or maintenance terms as the machine in which they are installed for the full warranty or maintenance period announced for such machine.
PCIe NVMe Flash Adapters have a maximum number of write cycles. PCIe NVMe Flash device failures will be replaced during the standard warranty period for the attached server at IBM's expense regardless of usage levels. IBM Maintenance Agreements after the warranty period are limited to devices that have not reached the maximum number of write cycles. Devices that reach this limit may fail to operate according to specifications and must be replaced at client's expense. Individual service life may vary and can be monitored using an OS command.
Yes
Same license terms and conditions as base machine
Back to top
|
| Prices |
|
For additional information and current prices, contact your local IBM representative.
The following are newly announced features on the specific models of the IBM Power Systems 7014, 7965, 8001, 8247, 8284, 8286, 8335, 8348, 8408, 9080, and 9119 machine type:
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7014 number number price Charge Support CSU MES
Rack Content Spec ESLL/ELLL
B42 ERC0 Initial N/A No
T00 Initial N/A No
T42 Initial N/A No
Rack Content Spec ESLS/ELLS
B42 ERC1 Initial N/A No
T00 Initial N/A No
T42 Initial N/A No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 7965 number number price Charge Support CSU MES
Rack Content Spec ESLL/ELLL
94Y ERC0 Initial N/A No
Rack Content Spec ESLS/ELLS
94Y ERC1 Initial N/A No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8001 number number price Charge Support CSU MES
1.8m 6ft Pwr Crd, 200-240V/10A
12C EKLM Both Yes No
22C Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8247 number number price Charge Support CSU MES
100Gb Optic Transceiver QSFP28
21L EB59 Both Yes No
22L Both Yes No
42L Both Yes No
0.5M 100GbE Cu Cable QSFP28
21L EB5J Both Yes No
22L Both Yes No
42L Both Yes No
1.0M 100GbE Cu Cable QSFP28
21L EB5K Both Yes No
22L Both Yes No
42L Both Yes No
1.5M 100GbE Cu Cable QSFP28
21L EB5L Both Yes No
22L Both Yes No
42L Both Yes No
2.0M 100GbE Cu Cable QSFP28
21L EB5M Both Yes No
22L Both Yes No
42L Both Yes No
3M 100GbE Optic Cable QSFP28
21L EB5R Both Yes No
22L Both Yes No
42L Both Yes No
5M 100GbE Optic Cable QSFP28
21L EB5S Both Yes No
22L Both Yes No
42L Both Yes No
10M 100GbE Optic Cable QSFP28
21L EB5T Both Yes No
22L Both Yes No
42L Both Yes No
15M 100GbE Optic Cable QSFP28
21L EB5U Both Yes No
22L Both Yes No
42L Both Yes No
20M 100GbE Optic Cable QSFP28
21L EB5V Both Yes No
22L Both Yes No
42L Both Yes No
30M 100GbE Optic Cable QSFP28
21L EB5W Both Yes No
22L Both Yes No
42L Both Yes No
50M 100GbE Optic Cable QSFP28
21L EB5X Both Yes No
22L Both Yes No
42L Both Yes No
100M 100GbE Optic Cable QSFP28
21L EB5Y Both Yes No
22L Both Yes No
42L Both Yes No
PCIe3 LP 2-port 100GbE Adptx16
21L EC3L Both Yes No
22L Both Yes No
PCIe3 2-port 100GbE Adapterx16
42L EC3M Both Yes No
KVM on Power Path
21L EC70 Initial N/A No
22L Initial N/A No
42L Initial N/A No
3M Copper CXP Cable Pair
21L ECCS Both Yes No
22L Both Yes No
42L Both Yes No
3.0M SAS X12 Cable
21L ECDJ Both Yes No
22L Both Yes No
42L Both Yes No
1.5M SAS YO12 Cable
21L ECDT Both Yes No
22L Both Yes No
42L Both Yes No
3.0M SAS YO12 Cable
21L ECDU Both Yes No
22L Both Yes No
42L Both Yes No
0.6M SAS AA12 Cable
21L ECE0 Both Yes No
22L Both Yes No
42L Both Yes No
3.0M SAS AA12 Cable
21L ECE3 Both Yes No
22L Both Yes No
42L Both Yes No
Boot Drive in EXP12SX Specify
21L EHR1 Both Yes No
22L Both Yes No
42L Both Yes No
Boot / Load in EXP24SX Specify
21L EHR2 Both Yes No
22L Both Yes No
42L Both Yes No
SSD Placement Ind- #ESLS/#ELLS
21L EHS2 Both Yes No
22L Both Yes No
42L Both Yes No
PCIe3 Crypto Coproc noBSC 4767
42L EJ32 Both Yes No
PCIe3 Crypto Coproc BSC-3 4767
21L EJ33 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 & CEC Ports 2YO
21L EJV0 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP12SX 1&1
21L EJV1 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP12SX 2&2
21L EJV2 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 2&2
21L EJV3 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 4&2
21L EJV4 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP12SX 4&2
21L EJV5 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 1&2
21L EJV6 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 2&2
21L EJV7 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 1&1
21L EJVA Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 2&1
21L EJVB Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP12SX 1&1
21L EJVC Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP12SX 2&1
21L EJVD Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP12SX 3&2
21L EJVE Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP12SX 2&2
21L EJVF Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 2&2
21L EJVG Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 2&1
21L EJVH Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 4&2
21L EJVJ Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP12SX 2&2
21L EJVP Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 4&2
21L EJVR Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 2&2
21L EJVS Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP12SX 2&1
21L EJVT Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 & CEC Ports 2YO
21L EJW0 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP24SX 1&1
21L EJW1 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP24SX 2&2
21L EJW2 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 2&2
21L EJW3 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 4&2
21L EJW4 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP24SX 4&2
21L EJW5 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 1&2
21L EJW6 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 2&2
21L EJW7 Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 1&1
21L EJWA Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 2&1
21L EJWB Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP24SX 1&1
21L EJWC Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP24SX 2&1
21L EJWD Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-4 for EXP24SX 3&2
21L EJWE Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP24SX 2&2
21L EJWF Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 2&2
21L EJWG Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 2&1
21L EJWH Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 4&2
21L EJWJ Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-1 for EXP24SX 2&2
21L EJWP Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 4&2
21L EJWR Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 2&2
21L EJWS Both Yes No
22L Both Yes No
42L Both Yes No
Specify Mode-2 for EXP24SX 2&1
21L EJWT Both Yes No
22L Both Yes No
42L Both Yes No
PCIe2 LP 8Gb 2-Port Fibre Chan
21L EL5Y Both Yes Yes
22L Both Yes Yes
PCIe2 8Gb 2-Port Fibre Channel
21L EL5Z Both Yes No
22L Both Yes No
42L Both Yes No
3.86TB 7200 RPM SAS LFF Disk
21L EL62 Both Yes No
22L Both Yes No
42L Both Yes No
7.72TB 7200 RPM SAS LFF Disk
21L EL64 Both Yes No
22L Both Yes No
42L Both Yes No
EXP12SX SAS Storage Enclosure
21L ELLL Both Yes No
22L Both Yes No
42L Both Yes No
EXP24SX SAS Storage Enclosure
21L ELLS Both Yes No
22L Both Yes No
42L Both Yes No
Qty 150 #EL62 3.86TB LFF Dsk
21L ELR2 Both Yes No
22L Both Yes No
42L Both Yes No
Qty 150 #EL64 7.72TB LFF Dsk
21L ELR4 Both Yes No
22L Both Yes No
42L Both Yes No
16 GB DDR4 Memory
21L EM8P Both Yes No
22L Both Yes No
32 GB DDR4 Memory
21L EM8Q Both Yes No
22L Both Yes No
64 GB DDR4 Memory
21L EM8R Both Yes No
22L Both Yes No
16 GB DDR4 Memory
42L EM91 Both Yes No
32 GB DDR4 Memory
42L EM92 Both Yes No
64 GB DDR4 Memory
42L EM93 Both Yes No
128 GB DDR4 Memory
42L EM94 Both Yes No
Horizontal PDU Mounting Hardwr
21L EPTH Both Yes No
22L Both Yes No
42L Both Yes No
High Function 9xC19 PDU
21L EPTJ Both Yes No
22L Both Yes No
42L Both Yes No
High Function 9xC19 PDU 3Phase
21L EPTL Both Yes No
22L Both Yes No
42L Both Yes No
High Function 12xC13 PDU
21L EPTN Both Yes No
22L Both Yes No
42L Both Yes No
High Function 12xC13 PDU 3-Phs
21L EPTQ Both Yes No
22L Both Yes No
42L Both Yes No
Specify AC Power Supply
21L ESLA Both Yes No
22L Both Yes No
42L Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8284 number number price Charge Support CSU MES
100Gb Optic Transceiver QSFP28
22A EB59 Both Yes No
0.5M 100GbE Cu Cable QSFP28
22A EB5J Both Yes No
1.0M 100GbE Cu Cable QSFP28
22A EB5K Both Yes No
1.5M 100GbE Cu Cable QSFP28
22A EB5L Both Yes No
2.0M 100GbE Cu Cable QSFP28
22A EB5M Both Yes No
3M 100GbE Optic Cable QSFP28
22A EB5R Both Yes No
5M 100GbE Optic Cable QSFP28
22A EB5S Both Yes No
10M 100GbE Optic Cable QSFP28
22A EB5T Both Yes No
15M 100GbE Optic Cable QSFP28
22A EB5U Both Yes No
20M 100GbE Optic Cable QSFP28
22A EB5V Both Yes No
30M 100GbE Optic Cable QSFP28
22A EB5W Both Yes No
50M 100GbE Optic Cable QSFP28
22A EB5X Both Yes No
100M 100GbE Optic Cable QSFP28
22A EB5Y Both Yes No
PCIe3 LP 2-port 100GbE Adptx16
22A EC3L Both Yes No
3M Copper CXP Cable Pair
22A ECCS Both Yes No
3.0M SAS X12 Cable
22A ECDJ Both Yes No
1.5M SAS YO12 Cable
22A ECDT Both Yes No
3.0M SAS YO12 Cable
22A ECDU Both Yes No
0.6M SAS AA12 Cable
22A ECE0 Both Yes No
3.0M SAS AA12 Cable
22A ECE3 Both Yes No
Boot Drive in EXP12SX Specify
22A EHR1 Both Yes No
Boot / Load in EXP24SX Specify
22A EHR2 Both Yes No
SSD Placement Ind- #ESLS/#ELLS
22A EHS2 Both Yes No
PCIe3 Crypto Coproc BSC-3 4767
22A EJ33 Both Yes No
Specify Mode-1 & CEC Ports 2YO
22A EJV0 Both Yes No
Specify Mode-1 for EXP12SX 1&1
22A EJV1 Both Yes No
Specify Mode-1 for EXP12SX 2&2
22A EJV2 Both Yes No
Specify Mode-2 for EXP12SX 2&2
22A EJV3 Both Yes No
Specify Mode-2 for EXP12SX 4&2
22A EJV4 Both Yes No
Specify Mode-4 for EXP12SX 4&2
22A EJV5 Both Yes No
Specify Mode-2 for EXP12SX 1&2
22A EJV6 Both Yes No
Specify Mode-2 for EXP12SX 2&2
22A EJV7 Both Yes No
Specify Mode-2 for EXP12SX 1&1
22A EJVA Both Yes No
Specify Mode-2 for EXP12SX 2&1
22A EJVB Both Yes No
Specify Mode-4 for EXP12SX 1&1
22A EJVC Both Yes No
Specify Mode-4 for EXP12SX 2&1
22A EJVD Both Yes No
Specify Mode-4 for EXP12SX 3&2
22A EJVE Both Yes No
Specify Mode-1 for EXP12SX 2&2
22A EJVF Both Yes No
Specify Mode-2 for EXP12SX 2&2
22A EJVG Both Yes No
Specify Mode-2 for EXP12SX 2&1
22A EJVH Both Yes No
Specify Mode-2 for EXP12SX 4&2
22A EJVJ Both Yes No
Specify Mode-1 for EXP12SX 2&2
22A EJVP Both Yes No
Specify Mode-2 for EXP12SX 4&2
22A EJVR Both Yes No
Specify Mode-2 for EXP12SX 2&2
22A EJVS Both Yes No
Specify Mode-2 for EXP12SX 2&1
22A EJVT Both Yes No
Specify Mode-1 & CEC Ports 2YO
22A EJW0 Both Yes No
Specify Mode-1 for EXP24SX 1&1
22A EJW1 Both Yes No
Specify Mode-1 for EXP24SX 2&2
22A EJW2 Both Yes No
Specify Mode-2 for EXP24SX 2&2
22A EJW3 Both Yes No
Specify Mode-2 for EXP24SX 4&2
22A EJW4 Both Yes No
Specify Mode-4 for EXP24SX 4&2
22A EJW5 Both Yes No
Specify Mode-2 for EXP24SX 1&2
22A EJW6 Both Yes No
Specify Mode-2 for EXP24SX 2&2
22A EJW7 Both Yes No
Specify Mode-2 for EXP24SX 1&1
22A EJWA Both Yes No
Specify Mode-2 for EXP24SX 2&1
22A EJWB Both Yes No
Specify Mode-4 for EXP24SX 1&1
22A EJWC Both Yes No
Specify Mode-4 for EXP24SX 2&1
22A EJWD Both Yes No
Specify Mode-4 for EXP24SX 3&2
22A EJWE Both Yes No
Specify Mode-1 for EXP24SX 2&2
22A EJWF Both Yes No
Specify Mode-2 for EXP24SX 2&2
22A EJWG Both Yes No
Specify Mode-2 for EXP24SX 2&1
22A EJWH Both Yes No
Specify Mode-2 for EXP24SX 4&2
22A EJWJ Both Yes No
Specify Mode-1 for EXP24SX 2&2
22A EJWP Both Yes No
Specify Mode-2 for EXP24SX 4&2
22A EJWR Both Yes No
Specify Mode-2 for EXP24SX 2&2
22A EJWS Both Yes No
Specify Mode-2 for EXP24SX 2&1
22A EJWT Both Yes No
16 GB DDR4 Memory
22A EM8P Both Yes No
32 GB DDR4 Memory
22A EM8Q Both Yes No
64 GB DDR4 Memory
22A EM8R Both Yes No
Horizontal PDU Mounting Hardwr
22A EPTH Both Yes No
High Function 9xC19 PDU
22A EPTJ Both Yes No
High Function 9xC19 PDU 3Phase
22A EPTL Both Yes No
High Function 12xC13 PDU
22A EPTN Both Yes No
High Function 12xC13 PDU 3-Phs
22A EPTQ Both Yes No
Qty 150 #ES62 3.86TB LFF Dsk
22A EQ62 Both Yes No
Qty 150 #ES64 7.72TB LFF Dsk
22A EQ64 Both Yes No
3.86TB 7200 RPM SAS LFF Disk
22A ES62 Both Yes No
7.72TB 7200 RPM SAS LFF Disk
22A ES64 Both Yes No
Specify AC Power Supply
22A ESLA Both Yes No
EXP12SX SAS Storage Enclosure
22A ESLL Both Yes No
EXP24SX SAS Storage Enclosure
22A ESLS Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8286 number number price Charge Support CSU MES
100Gb Optic Transceiver QSFP28
41A EB59 Both Yes No
42A Both Yes No
0.5M 100GbE Cu Cable QSFP28
41A EB5J Both Yes No
42A Both Yes No
1.0M 100GbE Cu Cable QSFP28
41A EB5K Both Yes No
42A Both Yes No
1.5M 100GbE Cu Cable QSFP28
41A EB5L Both Yes No
42A Both Yes No
2.0M 100GbE Cu Cable QSFP28
41A EB5M Both Yes No
42A Both Yes No
3M 100GbE Optic Cable QSFP28
41A EB5R Both Yes No
42A Both Yes No
5M 100GbE Optic Cable QSFP28
41A EB5S Both Yes No
42A Both Yes No
10M 100GbE Optic Cable QSFP28
41A EB5T Both Yes No
42A Both Yes No
15M 100GbE Optic Cable QSFP28
41A EB5U Both Yes No
42A Both Yes No
20M 100GbE Optic Cable QSFP28
41A EB5V Both Yes No
42A Both Yes No
30M 100GbE Optic Cable QSFP28
41A EB5W Both Yes No
42A Both Yes No
50M 100GbE Optic Cable QSFP28
41A EB5X Both Yes No
42A Both Yes No
100M 100GbE Optic Cable QSFP28
41A EB5Y Both Yes No
42A Both Yes No
PCIe3 2-port 100GbE Adapterx16
41A EC3M Both Yes No
42A Both Yes No
3M Copper CXP Cable Pair
41A ECCS Both Yes No
42A Both Yes No
3.0M SAS X12 Cable
41A ECDJ Both Yes No
42A Both Yes No
1.5M SAS YO12 Cable
41A ECDT Both Yes No
42A Both Yes No
3.0M SAS YO12 Cable
41A ECDU Both Yes No
42A Both Yes No
0.6M SAS AA12 Cable
41A ECE0 Both Yes No
42A Both Yes No
3.0M SAS AA12 Cable
41A ECE3 Both Yes No
42A Both Yes No
Boot Drive in EXP12SX Specify
41A EHR1 Both Yes No
42A Both Yes No
Boot / Load in EXP24SX Specify
41A EHR2 Both Yes No
42A Both Yes No
SSD Placement Ind- #ESLS/#ELLS
41A EHS2 Both Yes No
42A Both Yes No
PCIe3 Crypto Coproc noBSC 4767
41A EJ32 Both Yes No
42A Both Yes No
PCIe3 Crypto Coproc BSC-3 4767
41A EJ33 Both Yes No
42A Both Yes No
Specify Mode-1 & CEC Ports 2YO
41A EJV0 Both Yes No
42A Both Yes No
Specify Mode-1 for EXP12SX 1&1
41A EJV1 Both Yes No
42A Both Yes No
Specify Mode-1 for EXP12SX 2&2
41A EJV2 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 2&2
41A EJV3 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 4&2
41A EJV4 Both Yes No
42A Both Yes No
Specify Mode-4 for EXP12SX 4&2
41A EJV5 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 1&2
41A EJV6 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 2&2
41A EJV7 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 1&1
41A EJVA Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 2&1
41A EJVB Both Yes No
42A Both Yes No
Specify Mode-4 for EXP12SX 1&1
41A EJVC Both Yes No
42A Both Yes No
Specify Mode-4 for EXP12SX 2&1
41A EJVD Both Yes No
42A Both Yes No
Specify Mode-4 for EXP12SX 3&2
41A EJVE Both Yes No
42A Both Yes No
Specify Mode-1 for EXP12SX 2&2
41A EJVF Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 2&2
41A EJVG Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 2&1
41A EJVH Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 4&2
41A EJVJ Both Yes No
42A Both Yes No
Specify Mode-1 for EXP12SX 2&2
41A EJVP Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 4&2
41A EJVR Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 2&2
41A EJVS Both Yes No
42A Both Yes No
Specify Mode-2 for EXP12SX 2&1
41A EJVT Both Yes No
42A Both Yes No
Specify Mode-1 & CEC Ports 2YO
41A EJW0 Both Yes No
42A Both Yes No
Specify Mode-1 for EXP24SX 1&1
41A EJW1 Both Yes No
42A Both Yes No
Specify Mode-1 for EXP24SX 2&2
41A EJW2 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 2&2
41A EJW3 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 4&2
41A EJW4 Both Yes No
42A Both Yes No
Specify Mode-4 for EXP24SX 4&2
41A EJW5 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 1&2
41A EJW6 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 2&2
41A EJW7 Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 1&1
41A EJWA Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 2&1
41A EJWB Both Yes No
42A Both Yes No
Specify Mode-4 for EXP24SX 1&1
41A EJWC Both Yes No
42A Both Yes No
Specify Mode-4 for EXP24SX 2&1
41A EJWD Both Yes No
42A Both Yes No
Specify Mode-4 for EXP24SX 3&2
41A EJWE Both Yes No
42A Both Yes No
Specify Mode-1 for EXP24SX 2&2
41A EJWF Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 2&2
41A EJWG Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 2&1
41A EJWH Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 4&2
41A EJWJ Both Yes No
42A Both Yes No
Specify Mode-1 for EXP24SX 2&2
41A EJWP Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 4&2
41A EJWR Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 2&2
41A EJWS Both Yes No
42A Both Yes No
Specify Mode-2 for EXP24SX 2&1
41A EJWT Both Yes No
42A Both Yes No
16 GB DDR4 Memory
41A EM91 Both Yes No
42A Both Yes No
32 GB DDR4 Memory
41A EM92 Both Yes No
42A Both Yes No
64 GB DDR4 Memory
41A EM93 Both Yes No
42A Both Yes No
128 GB DDR4 Memory
41A EM94 Both Yes No
42A Both Yes No
Horizontal PDU Mounting Hardwr
41A EPTH Both Yes No
42A Both Yes No
High Function 9xC19 PDU
41A EPTJ Both Yes No
42A Both Yes No
High Function 9xC19 PDU 3Phase
41A EPTL Both Yes No
42A Both Yes No
High Function 12xC13 PDU
41A EPTN Both Yes No
42A Both Yes No
High Function 12xC13 PDU 3-Phs
41A EPTQ Both Yes No
42A Both Yes No
Qty 150 #ES62 3.86TB LFF Dsk
41A EQ62 Both Yes No
42A Both Yes No
Qty 150 #ES64 7.72TB LFF Dsk
41A EQ64 Both Yes No
42A Both Yes No
3.86TB 7200 RPM SAS LFF Disk
41A ES62 Both Yes No
42A Both Yes No
7.72TB 7200 RPM SAS LFF Disk
41A ES64 Both Yes No
42A Both Yes No
283GB 15k SAS SFF-3 Disk 5xx
41A ESDV Initial N/A No
283GB 15k SAS SFF-3 Disk 4k
41A ESFG Initial N/A No
Specify AC Power Supply
41A ESLA Both Yes No
42A Both Yes No
EXP12SX SAS Storage Enclosure
41A ESLL Both Yes No
42A Both Yes No
EXP24SX SAS Storage Enclosure
41A ESLS Both Yes No
42A Both Yes No
RDX Top Mount Docking Station
41A EUA3 Initial N/A No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8335 number number price Charge Support CSU MES
KVM on Power Path
GCA EC70 Initial N/A No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8348 number number price Charge Support CSU MES
KVM on Power Path
21C EC70 Initial N/A No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 8408 number number price Charge Support CSU MES
PCIe3 1.6TB NVMe Flash Adapter
E8E EC55 Both Yes No
PCIe3 3.2TB NVMe Flash Adapter
E8E EC57 Both Yes No
3M Copper CXP Cable Pair
E8E ECCS Both Yes No
Horizontal PDU Mounting Hardwr
E8E EPTH Both Yes No
High Function 9xC19 PDU
E8E EPTJ Both Yes No
High Function 9xC19 PDU 3Phase
E8E EPTL Both Yes No
High Function 12xC13 PDU
E8E EPTN Both Yes No
High Function 12xC13 PDU 3-Phs
E8E EPTQ Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9080 number number price Charge Support CSU MES
CBU for PowerHA Specify
MME EB3K Initial N/A No
0.5M EDR/100GbE Copper Cable
MHE EB50 Both Yes No
MME Both Yes No
1.0M EDR/100GbE Copper Cable
MHE EB51 Both Yes No
MME Both Yes No
2.0M EDR/100GbE Copper Cable
MHE EB52 Both Yes No
MME Both Yes No
1.5M EDR/100GbE Copper Cable
MHE EB54 Both Yes No
MME Both Yes No
100Gb Optic Transceiver QSFP28
MHE EB59 Both Yes No
MME Both Yes No
3M EDR/100GbE Optical Cable
MHE EB5A Both Yes No
MME Both Yes No
5M EDR/100GbE Optical Cable
MHE EB5B Both Yes No
MME Both Yes No
10M EDR/100GbE Optical Cable
MHE EB5C Both Yes No
MME Both Yes No
15M EDR/100GbE Optical Cable
MHE EB5D Both Yes No
MME Both Yes No
20M EDR/100GbE Optical Cable
MHE EB5E Both Yes No
MME Both Yes No
30M EDR/100GbE Optical Cable
MHE EB5F Both Yes No
MME Both Yes No
50M EDR/100GbE Optical Cable
MHE EB5G Both Yes No
MME Both Yes No
100M EDR/100GbE Optical Cable
MHE EB5H Both Yes No
MME Both Yes No
0.5M 100GbE Cu Cable QSFP28
MHE EB5J Both Yes No
MME Both Yes No
1.0M 100GbE Cu Cable QSFP28
MHE EB5K Both Yes No
MME Both Yes No
1.5M 100GbE Cu Cable QSFP28
MHE EB5L Both Yes No
MME Both Yes No
2.0M 100GbE Cu Cable QSFP28
MHE EB5M Both Yes No
MME Both Yes No
3M 100GbE Optic Cable QSFP28
MHE EB5R Both Yes No
MME Both Yes No
5M 100GbE Optic Cable QSFP28
MHE EB5S Both Yes No
MME Both Yes No
10M 100GbE Optic Cable QSFP28
MHE EB5T Both Yes No
MME Both Yes No
15M 100GbE Optic Cable QSFP28
MHE EB5U Both Yes No
MME Both Yes No
20M 100GbE Optic Cable QSFP28
MHE EB5V Both Yes No
MME Both Yes No
30M 100GbE Optic Cable QSFP28
MHE EB5W Both Yes No
MME Both Yes No
50M 100GbE Optic Cable QSFP28
MHE EB5X Both Yes No
MME Both Yes No
100M 100GbE Optic Cable QSFP28
MHE EB5Y Both Yes No
MME Both Yes No
PCIe3 LP 2port 100Gb EDR IB Ad
MHE EC3E Both Yes No
MME Both Yes No
PCIe3 LP 2-port 100GbE Adptx16
MHE EC3L Both Yes No
MME Both Yes No
PCIe3 LP 1port 100Gb EDR IB Ad
MHE EC3T Both Yes No
MME Both Yes No
3.0M SAS X12 Cable
MHE ECDJ Both Yes No
MME Both Yes No
1.5M SAS YO12 Cable
MHE ECDT Both Yes No
MME Both Yes No
3.0M SAS YO12 Cable
MHE ECDU Both Yes No
MME Both Yes No
0.6M SAS AA12 Cable
MHE ECE0 Both Yes No
MME Both Yes No
3.0M SAS AA12 Cable
MHE ECE3 Both Yes No
MME Both Yes No
SAP HANA TRACKING FEAT
MHE EHKV Initial N/A No
MME Initial N/A No
Boot Drive in EXP12SX Specify
MHE EHR1 Both Yes No
MME Both Yes No
Boot / Load in EXP24SX Specify
MHE EHR2 Both Yes No
MME Both Yes No
SSD Placement Ind- #ESLS/#ELLS
MHE EHS2 Both Yes No
MME Both Yes No
PCIe3 Crypto Coproc BSC-3 4767
MHE EJ33 Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 1&1
MHE EJV1 Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 2&2
MHE EJV2 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJV3 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 4&2
MHE EJV4 Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 4&2
MHE EJV5 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 1&2
MHE EJV6 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJV7 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 1&1
MHE EJVA Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&1
MHE EJVB Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 1&1
MHE EJVC Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 2&1
MHE EJVD Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 3&2
MHE EJVE Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 2&2
MHE EJVF Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJVG Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&1
MHE EJVH Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 4&2
MHE EJVJ Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 2&2
MHE EJVP Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 4&2
MHE EJVR Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJVS Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&1
MHE EJVT Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 1&1
MHE EJW1 Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 2&2
MHE EJW2 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJW3 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 4&2
MHE EJW4 Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 4&2
MHE EJW5 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 1&2
MHE EJW6 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJW7 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 1&1
MHE EJWA Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&1
MHE EJWB Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 1&1
MHE EJWC Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 2&1
MHE EJWD Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 3&2
MHE EJWE Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 2&2
MHE EJWF Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJWG Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&1
MHE EJWH Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 4&2
MHE EJWJ Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 2&2
MHE EJWP Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 4&2
MHE EJWR Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJWS Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&1
MHE EJWT Both Yes No
MME Both Yes No
64 GB DDR4 Memory (4x16GB)
MHE EM8U Both No No
MME Both No No
128 GB DDR4 Memory (4x32GB)
MHE EM8V Both No No
MME Both No No
256 GB DDR4 Memory (4x64GB)
MHE EM8W Both No No
MME Both No No
512GB DDR4 Memory (4x128GB)
MHE EM8X Both No No
MME Both No No
CBU 4.02 GHz, 32-core POWER8
MME EPBW Initial N/A No
Horizontal PDU Mounting Hardwr
MHE EPTH Both Yes No
MME Both Yes No
High Function 9xC19 PDU
MHE EPTJ Both Yes No
MME Both Yes No
High Function 9xC19 PDU 3Phase
MHE EPTL Both Yes No
MME Both Yes No
High Function 12xC13 PDU
MHE EPTN Both Yes No
MME Both Yes No
High Function 12xC13 PDU 3-Phs
MHE EPTQ Both Yes No
MME Both Yes No
Qty 150 #ES62 3.86TB LFF Dsk
MHE EQ62 Both Yes No
MME Both Yes No
Qty 150 #ES64 7.72TB LFF Dsk
MHE EQ64 Both Yes No
MME Both Yes No
3.86TB 7200 RPM SAS LFF Disk
MHE ES62 Both Yes No
MME Both Yes No
7.72TB 7200 RPM SAS LFF Disk
MHE ES64 Both Yes No
MME Both Yes No
Specify AC Power Supply
MHE ESLA Both Yes No
MME Both Yes No
EXP12SX SAS Storage Enclosure
MHE ESLL Both Yes No
MME Both Yes No
EXP24SX SAS Storage Enclosure
MHE ESLS Both Yes No
MME Both Yes No
Minimum Initial/
Monthly MES/
Description Model Feature Purchase Maint. Both/ RP
Machine type 9119 number number price Charge Support CSU MES
CBU for PowerHA Specify
MME EB3K Initial N/A No
0.5M EDR/100GbE Copper Cable
MHE EB50 Both Yes No
MME Both Yes No
1.0M EDR/100GbE Copper Cable
MHE EB51 Both Yes No
MME Both Yes No
2.0M EDR/100GbE Copper Cable
MHE EB52 Both Yes No
MME Both Yes No
1.5M EDR/100GbE Copper Cable
MHE EB54 Both Yes No
MME Both Yes No
100Gb Optic Transceiver QSFP28
MHE EB59 Both Yes No
MME Both Yes No
3M EDR/100GbE Optical Cable
MHE EB5A Both Yes No
MME Both Yes No
5M EDR/100GbE Optical Cable
MHE EB5B Both Yes No
MME Both Yes No
10M EDR/100GbE Optical Cable
MHE EB5C Both Yes No
MME Both Yes No
15M EDR/100GbE Optical Cable
MHE EB5D Both Yes No
MME Both Yes No
20M EDR/100GbE Optical Cable
MHE EB5E Both Yes No
MME Both Yes No
30M EDR/100GbE Optical Cable
MHE EB5F Both Yes No
MME Both Yes No
50M EDR/100GbE Optical Cable
MHE EB5G Both Yes No
MME Both Yes No
100M EDR/100GbE Optical Cable
MHE EB5H Both Yes No
MME Both Yes No
0.5M 100GbE Cu Cable QSFP28
MHE EB5J Both Yes No
MME Both Yes No
1.0M 100GbE Cu Cable QSFP28
MHE EB5K Both Yes No
MME Both Yes No
1.5M 100GbE Cu Cable QSFP28
MHE EB5L Both Yes No
MME Both Yes No
2.0M 100GbE Cu Cable QSFP28
MHE EB5M Both Yes No
MME Both Yes No
3M 100GbE Optic Cable QSFP28
MHE EB5R Both Yes No
MME Both Yes No
5M 100GbE Optic Cable QSFP28
MHE EB5S Both Yes No
MME Both Yes No
10M 100GbE Optic Cable QSFP28
MHE EB5T Both Yes No
MME Both Yes No
15M 100GbE Optic Cable QSFP28
MHE EB5U Both Yes No
MME Both Yes No
20M 100GbE Optic Cable QSFP28
MHE EB5V Both Yes No
MME Both Yes No
30M 100GbE Optic Cable QSFP28
MHE EB5W Both Yes No
MME Both Yes No
50M 100GbE Optic Cable QSFP28
MHE EB5X Both Yes No
MME Both Yes No
100M 100GbE Optic Cable QSFP28
MHE EB5Y Both Yes No
MME Both Yes No
PCIe3 LP 2port 100Gb EDR IB Ad
MHE EC3E Both Yes No
MME Both Yes No
PCIe3 LP 2-port 100GbE Adptx16
MHE EC3L Both Yes No
MME Both Yes No
PCIe3 LP 1port 100Gb EDR IB Ad
MHE EC3T Both Yes No
MME Both Yes No
3.0M SAS X12 Cable
MHE ECDJ Both Yes No
MME Both Yes No
1.5M SAS YO12 Cable
MHE ECDT Both Yes No
MME Both Yes No
3.0M SAS YO12 Cable
MHE ECDU Both Yes No
MME Both Yes No
0.6M SAS AA12 Cable
MHE ECE0 Both Yes No
MME Both Yes No
3.0M SAS AA12 Cable
MHE ECE3 Both Yes No
MME Both Yes No
Boot Drive in EXP12SX Specify
MHE EHR1 Both Yes No
MME Both Yes No
Boot / Load in EXP24SX Specify
MHE EHR2 Both Yes No
MME Both Yes No
SSD Placement Ind- #ESLS/#ELLS
MHE EHS2 Both Yes No
MME Both Yes No
PCIe3 Crypto Coproc BSC-3 4767
MHE EJ33 Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 1&1
MHE EJV1 Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 2&2
MHE EJV2 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJV3 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 4&2
MHE EJV4 Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 4&2
MHE EJV5 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 1&2
MHE EJV6 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJV7 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 1&1
MHE EJVA Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&1
MHE EJVB Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 1&1
MHE EJVC Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 2&1
MHE EJVD Both Yes No
MME Both Yes No
Specify Mode-4 for EXP12SX 3&2
MHE EJVE Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 2&2
MHE EJVF Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJVG Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&1
MHE EJVH Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 4&2
MHE EJVJ Both Yes No
MME Both Yes No
Specify Mode-1 for EXP12SX 2&2
MHE EJVP Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 4&2
MHE EJVR Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&2
MHE EJVS Both Yes No
MME Both Yes No
Specify Mode-2 for EXP12SX 2&1
MHE EJVT Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 1&1
MHE EJW1 Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 2&2
MHE EJW2 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJW3 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 4&2
MHE EJW4 Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 4&2
MHE EJW5 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 1&2
MHE EJW6 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJW7 Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 1&1
MHE EJWA Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&1
MHE EJWB Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 1&1
MHE EJWC Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 2&1
MHE EJWD Both Yes No
MME Both Yes No
Specify Mode-4 for EXP24SX 3&2
MHE EJWE Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 2&2
MHE EJWF Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJWG Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&1
MHE EJWH Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 4&2
MHE EJWJ Both Yes No
MME Both Yes No
Specify Mode-1 for EXP24SX 2&2
MHE EJWP Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 4&2
MHE EJWR Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&2
MHE EJWS Both Yes No
MME Both Yes No
Specify Mode-2 for EXP24SX 2&1
MHE EJWT Both Yes No
MME Both Yes No
64 GB DDR4 Memory (4x16GB)
MHE EM8U Both No No
MME Both No No
128 GB DDR4 Memory (4x32GB)
MHE EM8V Both No No
MME Both No No
256 GB DDR4 Memory (4x64GB)
MHE EM8W Both No No
MME Both No No
512GB DDR4 Memory (4x128GB)
MHE EM8X Both No No
MME Both No No
CBU 4.02 GHz, 32-core POWER8
MME EPBW Initial N/A No
CBU 4.19 GHz, 40-core POWER8
MME EPBX Initial N/A No
Horizontal PDU Mounting Hardwr
MHE EPTH Both Yes No
MME Both Yes No
High Function 9xC19 PDU
MHE EPTJ Both Yes No
MME Both Yes No
High Function 9xC19 PDU 3Phase
MHE EPTL Both Yes No
MME Both Yes No
High Function 12xC13 PDU
MHE EPTN Both Yes No
MME Both Yes No
High Function 12xC13 PDU 3-Phs
MHE EPTQ Both Yes No
MME Both Yes No
Qty 150 #ES62 3.86TB LFF Dsk
MHE EQ62 Both Yes No
MME Both Yes No
Qty 150 #ES64 7.72TB LFF Dsk
MHE EQ64 Both Yes No
MME Both Yes No
3.86TB 7200 RPM SAS LFF Disk
MHE ES62 Both Yes No
MME Both Yes No
7.72TB 7200 RPM SAS LFF Disk
MHE ES64 Both Yes No
MME Both Yes No
Specify AC Power Supply
MHE ESLA Both Yes No
MME Both Yes No
EXP12SX SAS Storage Enclosure
MHE ESLL Both Yes No
MME Both Yes No
EXP24SX SAS Storage Enclosure
MHE ESLS Both Yes No
MME Both Yes No
- CSU = Customer setup
- RP MES = Return parts miscellaneous equipment specification
- N/A = Not applicable
Feature conversions
Feature conversions for 8286-41A adapter features:
Parts Purchase
From FC: To FC: returned price
EJ32 - PCIe3 Crypto EJ33 - PCIe3 Crypto No
Coprocessor no BSC 4767 Coprocessor BSC-Gen3 4767
Feature conversions for 8286-42A adapter features:
Parts Purchase
From FC: To FC: returned price
EJ32 - PCIe3 Crypto EJ33 - PCIe3 Crypto No
Coprocessor no BSC 4767 Coprocessor BSC-Gen3 4767
Feature conversions for 8408-E8E adapter features:
Parts Purchase
From FC: To FC: returned price
EJ32 - PCIe3 Crypto EJ33 - PCIe3 Crypto No
Coprocessor no BSC 4767 Coprocessor BSC-Gen3 4767
Feature conversions for 9117-MMD to 9080-MHE memory features:
Parts Purchase
From FC: To FC: returned price
5600 - 0/32GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X8GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X16GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
Feature conversions for 9117-MMD to 9080-MME memory features:
Parts Purchase
From FC: To FC: returned price
EM40 - 0/32GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X8GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X16GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM40 - 0/32GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM40 - 0/32GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM40 - 0/32GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
Feature conversions for 9117-MMD to 9119-MHE memory features:
Parts Purchase
From FC: To FC: returned price
5600 - 0/32GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X8GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X16GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
Feature conversions for 9117-MMD to 9119-MME memory features:
Parts Purchase
From FC: To FC: returned price
EM40 - 0/32GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X8GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X16GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM40 - 0/32GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM40 - 0/32GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM40 - 0/32GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM41 - 0/64GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
Feature conversions for 9179-MHD to 9080-MHE memory features:
Parts Purchase
From FC: To FC: returned price
5600 - 0/32GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X8GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X16GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
Feature conversions for 9179-MHD to 9119-MHE memory features:
Parts Purchase
From FC: To FC: returned price
5600 - 0/32GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X8GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8U - 64 GB DDR4 Memory Yes
Memory (4X16GB) DIMMS - (4x16GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8V - 128 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x32GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8W - 256 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x64GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
5564 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5600 - 0/32GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X8GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5601 - 0/64GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X16GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
5602 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7 CoD
Memory
EM42 - 0/128GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X32GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
EM44 - 0/256GB DDR3 EM8X - 512 GB DDR4 Yes
Memory (4X64GB) DIMMS - Memory (4x128GB CDIMMs)
1066 MHz - POWER7+ CoD
Memory
Back to top
|
| Pricing terms |
|
Prices in the following PDF prices link are suggested list prices on day of announcement for the U.S. only. They are provided for your information only. Dealer prices may vary, and prices may also vary by country. IBM list price does not include tax or shipping and is subject to change without notice.
Trademarks
Power Systems and Electronic Service Agent are trademarks of IBM Corporation in the United States, other countries, or both.
IBM, Power, PowerHA, AIX, POWER8, Express, PartnerWorld, POWER7, PowerVM, System Storage and Global Technology Services are registered trademarks of IBM Corporation in the United States, other countries, or both.
Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service marks of others.
Terms of use
IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at
For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page