IBM Copy Services Manager 6.3.2 delivers replication management with simplified and automated replication tasks

IBM United States Software Announcement 222-074
March 8, 2022

Table of contents

	Overview		Technical information
	Key requirements		Ordering information
	Planned availability date		Terms and conditions
	Description		Prices
	Program number		Regional availability
	Publications

At a glance

IBM® Copy Services Manager delivers support for advanced copy services capabilities on IBM DS8000® systems, IBM SAN Volume Controller (SVC), IBM Spectrum® Virtualize systems, IBM FlashSystem® A9000 series, and IBM XIV® systems. These capabilities include automating administration and configuration of these services, operational control of copy services tasks (starting, suspending, and resuming), and monitoring and managing the copy services sessions.

Copy Services Manager supports Metro Mirror, FlashCopy®, Safeguarded Copy for cyber resiliency, and Global Mirror on the DS8000 and SVC hardware platforms. Advanced disaster recovery functions are also supported with failover/failback (planned and unplanned) from a primary site to a disaster recovery site. Copy Services Manager can monitor the performance of the copy services that provide a measurement of the amount of replication and the amount of time that is required to complete the replication operations. Copy Services Manager also supports multitarget with practice capability for both Metro Mirror and Global Mirror.

By using Copy Services Manager on DS8000 or IBM Spectrum Virtualize storage devices, tasks that took up to five steps can be accomplished in just one. Copy Services Manager also provides advanced features across the entire replication environment, such as the ability to schedule tasks against Copy Service Manager sessions and the ability to set up a practice session. The practice session in Copy Services Manager enables you to test your disaster recovery environment without interfering with daily operations so that you can run a practice session before you perform the actual action.

Overview

Copy Services Manager is a replication management solution that delivers central control of your replication environment while helping to simplify and automate complex replication tasks. With Copy Services Manager, you can coordinate copy services on a variety of IBM Storage Systems, including but not limited to, DS8000, SVC, IBM Spectrum Virtualize controllers, IBM Storwize® V7000, IBM FlashSystem A9000 and A9000R, and IBM XIV. You can help prevent errors and increase system continuity using source and target volume matching, site awareness, disaster recovery testing, and standby management.

Copy Services Manager 6.3.2 offers the following improvements over the previous release:

A scheduled task action to check the DS8000 Global Mirror Recovery Point Objective prior to continuing with the task
Ability to clear SCSI-reservations on DS8000 FlashCopy establishes with Copy Services Manager during practice and real disaster recovery scenarios
Creation of a user role for automation
Ability to programmatically backup the Copy Services Manager server or create a log package and download the results
Ability to consistently suspend DS8000 Global Mirror sessions sharing the same consistency group on the hardware by specifying a property
Ability to programmatically recover the last successful Safeguarded Copy backup without specifying a backup ID
Enhanced support for defining custom certificates for Copy Services Manager servers
Support for installing Copy Services Manager on AIX® 7.3
Support for user-defined session name on multitarget Metro Mirror - Metro Mirror sessions enabled for HyperSwap®
All IBM Spectrum Virtualize based storage systems and volumes are renamed to use IBM Spectrum Virtualize in the name instead of the storage system type
DS8000 restore to production feature is allowed to run restore whether the Safeguarded Copy backup is running on the remote copy source or target volume
Ability to rename Copy Services Manager sessions while in certain states
Copy Services Manager CLI command to view the amount of terabytes managed by Copy Services Manager
Ability to invoke external scripts within scheduled tasks
Support for migrating secondary DS8000 storage systems to new DS8000 storage systems

Key requirements

Support for DS8000 restore to Safeguard Copy backup to production requires DS8000 R9.2 (89.20.xx.x), and above.

Planned availability date

March 18, 2022.

Availability within a country is subject to local legal requirements.

Description

Copy Services Manager reduces the number of steps required for many copy services management activities and has many added benefits over other replication methods. Commands are efficient and easy to understand. An active and a standby server can both be set up to enable server redundancy. You can define default port pairings for logical paths on DS8000 Storage systems. Progress reports of the copies within the sessions are available within reports. You can help ensure visibility by setting up recovery point objective (RPO) warnings and severe threshold alerts, and the RPO data can be exported in CSV format for easy analysis.

Safety features are built-in with Copy Services Manager. These features include prompts or warnings before an action is executed, defined user roles to help prevent unapproved actions, volume protection capability, and site awareness to help prevent incorrect hardware relationships.

Copy Services Manager is well-integrated with z Systems®, even when running on a distributed systems server. The server function runs in a z/OS® address space. You can use FICON® for FICON-attached volumes without a TCP/IP connection when the system mover is present. TCP/IP can be used for volumes without FICON attachment. Hardened freeze support ensures consistency can be maintained for a Metro Mirror session even when there is loss of access to the Copy Services Manager server. The z Systems storage administrator can monitor both mainframe (ECKD) DASD volumes and nonmainframe (FBA) disk volumes.

Copy Services Manager delivers the ability to manage basic HyperSwap, Metro Mirror with HyperSwap, or Metro Global Mirror with HyperSwap when all primary and secondary devices are defined to z Systems with available paths. HyperSwap provides continuous availability by handling both planned and unplanned automatic swapping of I/O requests from the primary to secondary site for Metro Mirror pairs. Operator interaction is not required, making this nondisruptive to the application.

Copy Services Manager delivers support for cyber resiliency by providing the ability to manage Safeguarded Copy solutions for DS8000 systems. In today's world where clients face the daily threat of cyberattacks, Safeguarded Copy can help ensure that they have multiple backups of their data available that they can use to recover or restore their data from. These backups are stored in storage that is not addressable, preventing the deletion of the backups from malicious intent.

Copy Services Manager Basic Edition is an entitled version of Copy Services Manager on z Systems providing continuous availability with HyperSwap, without disaster recovery capabilities. Metro Mirror with HyperSwap and Metro Global Mirror with HyperSwap support adds in disaster recovery capabilities along with the high availability of HyperSwap in solutions with two or three sites. Once Copy Services Manager loads the configuration, swap by command or event can be managed directly from z Systems. The same I/O supervisor component handles the actual swap as with IBM Geographically Dispersed Parallel Sysplex®. This HyperSwap is coordinated across the sysplex and can also be managed through Copy Services Manager from a remote server.

By using Copy Services Manager for management of your copy services, you can help reduce your workload by using less commands and improve safety through precommand execution warnings and user roles. The integration of Copy Services Manager with z Systems and support for Metro Mirror, Global Mirror, and HyperSwap helps to ensure your replication is managed in a single place and in an efficient manner.

IBM Copy Services Manager z/OS FlashCopy Manager is a tool to assist in the integration of IBM DS8000 FlashCopy Services into the z/OS batch production environment. z/OS FlashCopy Manager will deliver the tools to discover, document, and autogenerate FlashCopy configurations, and build batch invocation jobs to be included in complex job streams that include other applications of software. You will also be able to control the entire FlashCopy process using standard z/OS job scheduling facilities to accomplish the required set of business objectives.

Section 508 of the US Rehabilitation Act

IBM Copy Services Manager 6.3.2 is capable, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A US Section 508 Accessibility Conformance Statement can be requested on the Product accessibility information website.

Reference information

For complete information about IBM Copy Services Manager for z Systems® and IBM Copy Services Manager for open systems, see Software Announcement 216-458, dated November 15, 2016.

For complete information about IBM Copy Services Manager on HMC through AAS, see Software Announcement 217-192, dated June 13, 2017.

For complete information about IBM Copy Services Manager License with 2-, 3-, 4-, and 5-year Software and Support, see Software Announcement 218-422, dated October 2, 2018.

Program number

Program number	VRM	Program name
5725-Z54	6.3.2	IBM Copy Services Manager (for Passport Advantage®)
5698-E01	6.3.2	IBM Copy Services Manager for z Systems
5698-E02	6.3.2	IBM Copy Services Manager Basic Edition for z Systems
5641-CSM	6.3.2	IBM Copy Services Manager License with 1 Year S&S
5641-2YR	6.3.2	IBM Copy Services Manager License with 2 Year S&S
5641-3YR	6.3.2	IBM Copy Services Manager License with 3 Year S&S
5641-4YR	6.3.2	IBM Copy Services Manager License with 4 Year S&S
5641-5YR	6.3.2	IBM Copy Services Manager License with 5 Year S&S

Program number	Subscription and Support PID number
5698-E01	5698-E03

Program number	Subscription and Support PID number
5698-E02	5698-E04

Program number	Subscription and Support PID number
5641-CSM	N/A

Program number	Subscription and Support PID number
5641-2YR	N/A

Program number	Subscription and Support PID number
5641-3YR	N/A

Program number	Subscription and Support PID number
5641-4YR	N/A

Program number	Subscription and Support PID number
5641-5YR	N/A

Software Subscription and Support renewals for orders placed using program numbers 5641-CSM, 5641-2YR, 5641-3YR, 5641-4YR, and 5641-5YR are managed in Passport Advantage under the appropriate DSW part number for 5725-Z54.

Business Partner information

If you are an IBM Business Partner acquiring IBM products or services directly from IBM, you may link directly to Business Partner information for this announcement.

BP Attachment for Announcement Letter 222-074

Publications

The following publications can be ordered from the IBM Publications Center:

Title	Order number
IBM Copy Services Manager User's Guide	SC27-8542
IBM Copy Services Manager Installation and Configuration Guide	SC27-8543
IBM Copy Services Manager Command-Line Interface User's Guide	SC27-8998
IBM Copy Services Manager z/OS® FlashCopy Manager User's Guide	SC27-8032

The IBM Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. Many publications are available online in various file formats, and they can all be downloaded by all countries.

Services

IBM Systems Lab Services

Systems Lab Services offers infrastructure services to help build hybrid cloud and enterprise IT solutions. From servers to storage systems and software, Systems Lab Services can help deploy the building blocks of a next-generation IT infrastructure to empower a client's business. Systems Lab Services consultants can perform infrastructure services for clients online or onsite, offering deep technical expertise, valuable tools, and successful methodologies. Systems Lab Services is designed to help clients solve business challenges, gain new skills, and apply best practices.

Systems Lab Services offers a wide range of infrastructure services for IBM Power® servers, IBM Storage systems, IBM Z®, and IBM LinuxONE. Systems Lab Services has a global presence and can deploy experienced consultants online or onsite around the world.

For assistance, contact Systems Lab Services at ibmsls@us.ibm.com.

To learn more, see the IBM Systems Lab Services website.

IBM Consulting

As transformation continues across every industry, businesses need a single partner to map their enterprise-wide business strategy and technology infrastructure. IBM Consulting is the business partner to help accelerate change across an organization. IBM specialists can help businesses succeed through finding collaborative ways of working that forge connections across people, technologies, and partner ecosystems. IBM Consulting brings together the business expertise and an ecosystem of technologies that help solve some of the biggest problems faced by organizations. With methods that get results faster, an integrated approach that is grounded in an open and flexible hybrid cloud architecture, and incorporating technology from IBM Research® and IBM Watson® AI, IBM Consulting enables businesses to lead change with confidence and deliver continuous improvement across a business and its bottom line.

For additional information, see the IBM Consulting website.

IBM Technology Support Services (TSS)

Get preventive maintenance, onsite and remote support and gain actionable insights into critical business applications and IT systems. Speed developer innovation with support for over 240 open-source packages. Leverage powerful IBM analytics and AI-enabled tools to enable client teams to manage IT problems before they become emergencies.

TSS offers extensive IT maintenance and support services that cover more than one niche of a client's environment. TSS covers products from IBM and OEMs, including servers, storage, network, appliances, and software, to help clients ensure high availability across their data center and hybrid cloud environment.

For details on available services, see the Technology support for hybrid cloud environments website.

IBM TechU

Improve your knowledge in hybrid cloud and AI solutions. TechU provides the most recent content so that you can learn, engage, and increase your skills with IBM Technology specialists.

A one-year, renewable digital TechU membership provides access to IBM Systems online education to help address your technical enablement needs for existing and new projects.

Submit questions or comments to techuid@us.ibm.com.

For additional details, see the IBM TechU website.

IBM Expert Labs

Expert Labs can help clients accelerate their projects and optimize value by leveraging their deep technical skills and knowledge. With more than 20 years of industry experience, these specialists know how to overcome the biggest challenges to deliver business results that can have an immediate impact.

Expert Labs' deep alignment with IBM product development allows for a strategic advantage as they are often the first in line to get access to new products, features, and early visibility into roadmaps. This connection with the development enables them to deliver First of a Kind implementations to address unique needs or expand a client's business with a flexible approach that works best for their organization.

For additional information, see the IBM Expert Labs website.

IBM Security® Expert Labs

With extensive consultative expertise on IBM Security software solutions, Security Expert Labs helps clients and partners modernize the security of their applications, data, and workforce. With an extensive portfolio of consulting and learning services, Expert Labs provides project-based and premier support service subscriptions.

These services can help clients deploy and integrate IBM Security software, extend their team resources, and help guide and accelerate successful hybrid cloud solutions, including critical strategies such as zero trust. Remote and on-premises software deployment assistance is available for IBM Cloud Pak® for Security, IBM Security QRadar®/QRoC, IBM Security SOAR/Resilient®, IBM i2®, IBM Security Verify, IBM Security Guardium®, and IBM Security MaaS360®.

For more information, contact Security Expert Labs at sel@us.ibm.com.

For additional information, see the IBM Security Expert Labs website.

Technical information

Specified operating environment

Hardware requirements

Product must be installed on a supported server as described in the IBM Copy Services Manager Installation and Configuration Guide 6.3.2.

Software requirements

No prerequisites or corequisites.

IBM Support

IBM Support is your gateway to technical support tools and resources that are designed to help you save time and simplify support. IBM Support can help you find answers to questions, download fixes, troubleshoot, submit and track problem cases, and build skills. Learn and stay informed about the transformation of IBM Support, including new tools, new processes, and new capabilities, by going to the IBM Support Insider.

Additional IBM support

IBM Client Engineering for Systems

Client Engineering for Systems is a framework for accelerating digital transformation. It helps you generate innovative ideas and equips you with the practices, technologies, and expertise to turn those ideas into business value in weeks. When you work with Client Engineering for Systems, you bring pain points into focus. You empower your team to take manageable risks, adopt leading technologies, speed up solution development, and measure the value of everything you do. Client Engineering for Systems has experts and services to address a broad array of use cases, including capabilities for business transformation, hybrid cloud, analytics and AI, infrastructure systems, security, and more. For more information, see the IBM Client Engineering for Systems website.

IBM Z Washington Systems Center (WSC)

IBM Z Washington Systems Center (WSC): WSC, a team with deep technical expertise, provides technical assistance. WSC teams can help position, design, and implement solutions, and support critical situations that contribute to IBM Z, IBM LinuxONE, and Linux® on IBM Z software, hardware, and services. For installation and technical support, provided by local Technical Specialists, contact the WSC at ilin@us.ibm.com.

For additional information, see the Washington SystemS Center - IBM Z website.

Planning information

Packaging

IBM Copy Services Manager Basic Edition for z Systems

These offerings are delivered through the internet through Shopz. All PTFs must be downloaded to assure the latest release configuration.

IBM Copy Services Manager for open systems

This offering is delivered as an electronic download from Passport Advantage. There is no physical media. All updates must be downloaded through Fix Central to assure the latest release configuration.

IBM Copy Services Manager for use on IBM DS8880 Series Storage HMC

This offering is delivered preloaded on the DS8880 series storage HMC and if enablement is purchased, a license key may be accessed through DFSA for enablement on the DS8000 series HMC. License entitlement and support are ordered through AAS and tracked through Passport Advantage. There is no physical media.

Security, auditability, and control

IBM Copy Services Manager uses the security and auditability features of the host hardware.

The client is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communication facilities.

Ordering information

Products announced as dual-pipe are available for ordering by program number and feature number or by part number. Products can be obtained by part number through Passport Advantage.

For more information, contact your IBM representative or IBM Business Partner.

This program is available only through Passport Advantage.

Product Group: IBM Systems

Product: IBM Copy Services Manager (5725-Z54)

Product Category: IBM Copy Services Manager

Ordering information for Passport Advantage

Passport Advantage (PPA) allows greater flexibility to help clients manage their software licenses and Subscription and Support renewals. Clients can have a common anniversary date for Subscription and Support renewals for all IBM software, under a PPA agreement, including IBM Storage software. The anniversary date, established at the order ship date for the initial product acquisition, will remain unchanged while their Passport Advantage or Passport Advantage Express agreement remains in effect.

The quantity to be specified for the Passport Advantage part numbers is per Resource Value Unit (RVU).

RVU

RVU is a unit of measure by which the program can be licensed. RVU Proofs of Entitlement are based on the number of units of a specific resource used or managed by the program. Licensee must obtain sufficient entitlements for the number of RVUs required for licensee's environment for the specific resources as specified in the program specific table. RVU entitlements are specific to the program and the type of resource and may not be exchanged, interchanged, or aggregated with RVU entitlements of another program or resource.

The Resource for RVU calculation for Copy Services Manager is terabyte, based on the number of source provisioned terabytes managed. Using the Copy Services Manager GUI, this entitlement requirement is the sum of the terabyte values for all source volumes across all Copy Services Manager sessions. A terabyte is 2 to the 40th power bytes, sometimes referred to as TiB. Licensee must obtain sufficient entitlements to cover the total number of terabytes of source data managed by the Program. The target terabyte count is not included when determining the required license entitlement.

RVU conversion list:

From 1 to 12 Resources, 1.00 RVU per Resource
From 13 to 32 Resources, 12 RVUs plus 0.84 RVUs per Resource above 12
From 33 to 64 Resources, 28.8 RVUs plus 0.61 RVUs per Resource above 32
From 65 to 100 Resources, 48.32 RVUs plus 0.46 RVUs per Resource above 64
From 101 to 250 Resources, 64.88 RVUs plus 0.38 RVUs per Resource above 100
For more than 250 Resources, 121.88 RVUs plus 0.30 RVUs per Resource above 250

To order for Passport Advantage, specify the desired part number and quantity.

Program name: IBM Copy Services Manager (5725-Z54)

Description	Part number
IBM Copy Services Manager Resource Value Units Lic + SW S&S 12 Mo	D1M9SLL
IBM Copy Services Manager Resource Value Units Annual SW S&S Rnwl	E0MK5LL
IBM Copy Services Manager Resource Value Units SW S&S Reinstate 12 Mo	D1M9TLL
IBM Copy Services Manager Resource Value Units MONTHLY LICENSE	D1M9MLL
IBM Copy Services Manager Resource Value Units for Linux on z Systems Lic + SW S&S 12 Mo	D1M9ULL
IBM Copy Services Manager Resource Value Units for Linux on z Systems Annual SW S&S Rnwl	E0MK6LL
IBM Copy Services Manager Resource Value Units for Linux on z Systems SW S&S Reinstate 12 Mo	D1M9VLL
IBM Copy Services Manager Resource Value Units for Linux on z Systems MONTHLY LICENSE	D1M9NLL

The products in the above tables are also available by web download from Passport Advantage.

The programs in this announcement all have Value Unit-Based pricing.

Program number	Program name	Value Unit exhibit
5698-E01	IBM Copy Services Manager for System z®	VUE027

For each z Systems IPLA program with Value Unit pricing, the quantity of that program needed to satisfy applicable IBM terms and conditions is referred to as the required license capacity. Your required license capacity is based upon the following factors:

The z Systems IPLA program you select.
The applicable Value Unit Exhibit.
The applicable terms.
Whether your current mainframes are full capacity or sub-capacity.
The number of source provisioned terabytes managed. Using the Copy Services Manager GUI, this entitlement requirement is the sum of the terabyte values for all source volumes across all Copy Services Manager sessions. A terabyte is 2 to the 40th power bytes, sometimes referred to as TiB. Licensee must obtain sufficient entitlements to cover the total number of terabytes of source data managed by the Program. The target terabyte count is not included when determining the required license entitlement.

Value Unit exhibit VUE027

Cumulative usage level	Value Units per TB
1 - 12 TB	1 VU/TB
13 - 32 TB	0.8455 VU/TB
33 - 64 TB	0.6137 VU/TB
65 - 100 TB	0.4639 VU/TB
101 - 250 TB	0.3870 VU/TB
251+ TB	0.3097 VU/TB

Ordering z/OS through the internet

Shopz provides an easy way to plan and order your z/OS ServerPac or CBPDO. It will analyze your current installation, determine the correct product migration, and present your new configuration based on z/OS. Additional products can also be added to your order (including determination of whether all product requisites are satisfied). For more details and availability, go to the Shopz website.

Product Group: IBM Systems

Product: IBM Copy Services Manager

Product Category: IBM Copy Services Manager

Ordering information for AAS

The quantity to be specified for the AAS Product identifiers is per RVU.

RVU

The Resource for the purpose of RVU calculation for Copy Services Manager is based on the number of source provisioned terabytes managed. Using the Copy Services Manager GUI, this entitlement requirement is the sum of the terabyte values for all source volumes across all Copy Services Manager sessions. A terabyte is 2 to the 40th power bytes, sometimes referred to as TiB. Licensee must obtain sufficient entitlements to cover the total number of terabytes of source data managed by the Program. The target terabyte count is not included when determining the required license entitlement.

RVU conversion list:

From 1 to 12 Resources, 1.00 RVU per Resource
From 13 to 32 Resources, 12 RVUs plus 0.84 RVUs per Resource above 12
From 33 to 64 Resources, 28.8 RVUs plus 0.61 RVUs per Resource above 32
From 65 to 100 Resources, 48.32 RVUs plus 0.46 RVUs per Resource above 64
From 101 to 250 Resources, 64.88 RVUs plus 0.38 RVUs per Resource above 100
For more than 250 Resources, 121.88 RVUs plus 0.30 RVUs per Resource above 250

Program name: IBM Copy Services Manager Software Maintenance

Program number	Feature description	One time charge feature number
5641-CSM	CSM Lic with 1 Year S&S Per RVU Qty 1	2235
	CSM Lic with 1 Year S&S Per RVU Qty 250	2236

Program number	Feature description	One time charge feature number
5641-2YR	CSM Lic with 2 Year S&S Per RVU Qty 1	2282
	CSM Lic with 2 Year S&S Per RVU Qty 250	2284

Program number	Feature description	One time charge feature number
5641-3YR	CSM Lic with 3 Year S&S Per RVU Qty 1	2280
	CSM Lic with 3 Year S&S Per RVU Qty 250	2285

Program number	Feature description	One time charge feature number
5641-4YR	CSM Lic with 4 Year S&S Per RVU Qty 1	2283
	CSM Lic with 4 Year S&S Per RVU Qty 250	2286

Program number	Feature description	One time charge feature number
5641-5YR	CSM Lic with 5 Year S&S Per RVU Qty 1	2281
	CSM Lic with 5 Year S&S Per RVU Qty 250	2287

Charge metric

Definitions of the charge metrics for these licensed products can be found in the following License Information documents:

Program name	PID number	Charge metric	License Information document number
IBM Copy Services Manager for open systems	5725-Z54	PA per Resource Value Units	L-SVGY-BPMK9J
IBM Copy Services Manager for z Systems	5698-E01	ESW per TB Value Units	L-SVGY-BPMK7L
IBM Copy Services Manager Basic Edition for z Systems	5698-E02	Per machine	L-SVGY-BPMK7L
IBM Copy Services Manager License with 1 Year S&S	5641-CSM	Per Resource Value Units	L-SVGY-BPMK9J
IBM Copy Services Manager License with 2 Year S&S	5641-2YR	Per Resource Value Units	L-SVGY-BPMK9J
IBM Copy Services Manager License with 3 Year S&S	5641-3YR	Per Resource Value Units	L-SVGY-BPMK9J
IBM Copy Services Manager License with 4 Year S&S	5641-4YR	Per Resource Value Units	L-SVGY-BPMK9J
IBM Copy Services Manager License with 5 Year S&S	5641-5YR	Per Resource Value Units	L-SVGY-BPMK9J

Select your language of choice and scroll down to the Charge Metrics section.

Basic license

To order, specify the program product number and the appropriate license or charge option. To suppress shipment of media, select the license-only option in CFSW.

Program name: IBM Copy Services Manager for z Systems

Program PID: 5698-E01

Entitlement identifier	Description	License option/Pricing metric
S017SN1	IBM Copy Services Manager for z Systems	Basic OTC, Value Units
	Trade-up from 5698-Z11 IBM Tivoli® Storage Productivity Center for Replication for System z®	MultiVersion Measurement No Charge

Orderable supply ID	Language
S017SN0	MUL (multi-lingual)

Subscription and Support PID: 5698-E03

Entitlement identifier	Description	License option/Pricing metric
S017WXT	IBM Copy Services Manager for z Systems S&S	Basic ASC, per Value Unit SW S&S
		No charge, decline SW S&S
		MultiVersion Measurement S&S No Charge

Orderable supply ID	Language
S017WXS	MUL (multi-lingual)

Program name: IBM Copy Services Manager Basic Edition for z Systems

Program PID: 5698-E02

Entitlement identifier	Description	License option/Pricing metric
S017WXV	IBM Copy Services Manager Basic Edition for z Systems	Basic OTC, Per Machine
		MultiVersion Measurement No Charge

Orderable supply ID	Language
S017SN3	MUL (multi-lingual)

Subscription and Support PID: 5698-E04

Entitlement identifier	Description	License option/Pricing metric
S017WXZ	IBM Copy Services Manager Basic Edition for z Systems S&S	Basic ASC, per Machine SW S&S
		No charge, decline SW S&S
		MultiVersion Measurement S&S No Charge

Orderable supply ID	Language
S017WXX	MUL (multi-lingual)

You choose the delivery method when you order the software. IBM recommends internet delivery. However, if you still require physical media, you can choose DVD.

Subscription and support (S&S)

To receive voice technical support over the telephone and future releases and versions at no additional charge, Subscription and Support must be ordered. The license includes one year of S&S. S&S renewal in one year increments is automatic unless specifically cancelled. The capacity of S&S (Value Units) must be the same as the capacity ordered for the product licenses. To order, specify the Subscription and Support program number (PID) referenced above and the appropriate license or charge option. This offering:

Includes and extends the support services provided in the base sup- port to include technical support via telephone.
Entitles you to future releases and versions, at no additional charge. Note that you are not entitled to new products.

When Subscription and Support is ordered, the charges will automatically renew annually unless cancelled by you.

The combined effect of the IPLA license and the Agreement for Acquisition of Software Maintenance gives you rights and support services comparable to those under the traditional ICA S/390® and System z license or its equivalent. To ensure that you continue to enjoy the level of support you are used to in the ICA business model, you must order BOTH the license for the program AND the support for the selected programs at the same Value Unit quantities.

Customized Offerings

Product deliverables are shipped only through CBPDO and ServerPac. These customized offerings are offered for internet delivery. For more details on Internet delivery, go to the Help section on the Shopz website.

IBM recommends internet delivery. However, if you still require physical media, you can choose DVD.

Many products can be ordered in ServerPac the month following their availability in CBPDO. z/OS can be ordered through CBPDO and ServerPac on the planned availability date. Many products will also be orderable in a ServerPac without also having to order the z/OS operating system or subsystem.

Shopz and CFSW will determine the eligibility based on product requisite checking. For more details on the ServerPac, go to the Help section on the Shopz website.

Production of software product orders will begin on the planned availability date.

CBPDO shipments will begin within 3 business days after the planned availability date.
ServerPac availability and shipments will begin within 3 - 4 weeks after the planned product availability date due to additional customization and data input verification.

Terms and conditions

The terms and conditions for IBM Copy Services Manager (5725-Z54, 5698-E01, and 5698-E02), as previously announced in Software Announcement 216-458, dated November 15, 2016, are unchanged.

The terms and conditions for IBM Copy Services Manager on HMC through AAS (5641-CSM), as previously announced in Software Announcement 217-192, dated June 13, 2017, are unchanged.

The terms and conditions for IBM Copy Services Manager with 2, 3, 4, and 5 Year Subscription and Support (5641-2YR, 5641-3YR, 5641-4YR, and 5641-5YR), as previously announced in Software Announcement 218-422, dated October 2, 2018, are unchanged.

Statement of good security practices

IT system security involves protecting systems and information through intrusion prevention, detection, and response to improper access from within and outside your enterprise. Improper access can result in information being altered, destroyed, or misappropriated or can result in misuse of your systems to attack others. Without a comprehensive approach to security, no IT system or product should be considered completely secure and no single product or security measure can be completely effective in preventing improper access. IBM systems and products are designed to be part of a regulatory compliant, comprehensive security approach, which will necessarily involve additional operational procedures, and may require other systems, products, or services to be most effective.

Important: IBM does not warrant that any systems, products, or services are immune from, or will make your enterprise immune from, the malicious or illegal conduct of any party.

Prices

The prices are unchanged by this announcement.

Regional availability

American Samoa, Guam, Marshall Islands, Federated States of Micronesia, Northern Mariana Islands, Palau, Puerto Rico, United States, and US Virgin Islands

Trademarks

IBM, DS8000, IBM Spectrum, IBM FlashSystem, XIV, FlashCopy, Storwize, AIX, HyperSwap, Passport Advantage, z Systems, z/OS, FICON, Parallel Sysplex, Power, IBM Z, IBM Research, IBM Watson, IBM Security, IBM Cloud Pak, QRadar, Resilient, i2, Guardium, MaaS360, System z, Tivoli and S/390 are registered trademarks of IBM Corporation in the United States, other countries, or both.

The registered trademark Linux® is used pursuant to a sublicense from the Linux Foundation, the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at

For the most current information regarding IBM products, consult your IBM representative or reseller, or go to the IBM worldwide contacts page

IBM United States