IBM Research scientist Nicolas Loubet holds a wafer of chips with 5nm silicon nanosheet transistors manufactured using an industry-first process that can deliver 40 percent performance enhancement at fixed power, or 75 percent power savings at matched performance. Press release link (Photo Credit: Connie Zhou)
Announced at the 2017 Symposia on VLSI Technology and Circuits conference in Kyoto this week, IBM and our research alliance partners, GLOBALFOUNDRIES and Samsung built a new type of transistor for chips at the 5 nanometer (nm) node.
To achieve this feat, the architecture – how the elements of a chip are arranged and the materials used – had to change.
We stacked layers of silicon nanosheets together, horizontally, in order for this new architecture to enable our 5nm transistor to deliver the power and performance boost future applications will demand. The change from today’s vertical architecture to horizontal layers of silicon opened a fourth “gate” on the transistor that enabled electrical signals to pass through and between other transistors on a chip. At these dimensions, it means that those signals are passing through a switch that’s no larger than the width of two to three DNA strands, side-by-side.
More ways to send a signal on more 5nm transistors equates to a 40 percent performance improvement over 10nm chips, using the same amount of power; or a 75 percent power savings, at the same performance level. (Let that sink in while reading this article on a mobile device with 10 percent power left: 5nm chips would give you hours, not minutes, before needing to recharge. A future 5nm-chip-powered mobile device will last days longer than what’s in your hand right now.)
Opening the path to more gates
Today’s chips with vertical “fin” transistors, called FinFET, power today’s most-powerful 14nm and 10nm chips, and even our own 7nm test chip announced two years ago. That third dimension of a fin allows for three gates for improved power and efficiency (versus, as you may have guessed, the previous generation’s 2D “planar” chips). These FinFET chips, only recently beginning to make their way into servers, computers, and devices, will be the standard for years to come. For reference, it takes 10 to 15 years of research and development before a groundbreaking new chip technology proliferates the market.
Pictured: a scan of IBM Research Alliance’s 5nm transistor, built using an industry-first process to stack silicon nanosheets as the device structure – achieving a scale of 30 billion switches on a fingernail-sized chip that will deliver significant power and performance enhancements over today’s state-of-the-art 10nm chips. (Photo credit: IBM)
The industry has long understood the limits of the various chip architectures. Our alliance working at the SUNY Polytechnic Institute Colleges of Nanoscale Science and Engineering’s NanoTech Complex in Albany, NY has known that, for example, it’s possible to build a 5nm FinFET transistor from a structural perspective. But scaling from our 7nm chip’s 20 billion FinFET transistors per chip, to 30 billion 5nm FinFET transistors would not deliver the significant power and performance boost mentioned above.
After about a decade of studying the idea of putting gates all around the transistor – often referred to as Gate-All-Around (GAA) – stacked nanosheets delivered a GAA transistor for the 5nm node that actually improved density, performance, and power – all built with industry manufacturable tools and processes.
Wait! What about Moore’s Law?
The mere introduction of new chip technology means this question comes up. Today, Moore’s Law, in the context of logic technology scaling, breaks down into four parts: density, performance, power and economy. Density, or the number of transistors per square inch of a chip, has gone from Gordon Moore’s original observation in 1965 of doubling every 12 months, to now taking three years. Performance improvements have experienced a similar slowing. Power, while less influential at its introduction, has grown in importance due to our battery-hungry mobile devices. The economy, or cost per transistor, is the only element of the “law” that’s kept similar pace over the last 50 years.
A future 5nm node chip with nanosheet transistors, and its scaled density, will deliver the expected value of performance, power, and economy.
At IBM, we think years ahead about what cognitive computing, cloud computing, blockchain, mobile, and security advances should be able to do – and what will make running those algorithms, and apps possible. We believe that billions of 5nm nanosheet transistors will soon serve as the silicon engine for these capabilities.
My assumption is that 5nm will appear first in expensive hardware and gradually filter down to less expensive stuff, such a phones.
I have a question on this: What proportion of chips are made at each current feature size? And is it indeed the case that cheaper devices tend to have chips with the larger feature sizes?
I wonder at what point it becomes uneconomic to manufacture larger-feature-size chips.
Great & cool
Very interesting write-up on 5nm technology. Thanks for sharing. Looking forward to the day where I don’t need to remember to charge my cell phone every single night..
This technology announcement is very encouraging for the future of IBM.
Exciting work! Proud to be part of the Alliance family.
“These FinFET chips, only recently beginning to make their way into servers, computers, and devices, will be the standard for years to come.”
What are you guys talking about? Intel has been making FinFET-based processors since 22nm in 2011, that’s almost a decade now…
Dave – FinFET chips are far from ubiquitous. FinFET adoption in the foundry business happened at 14nm, starting in mobile phone CPUs in 2015, and the first available 14nm server CPU was in 2016. Only now are 10nm chips making their way into mobile phones; 10nm chips for computers and servers are not yet available. Compared to the years of advancement yet to be made with this architecture, not to mention the longevity of past designs, FinFET’s presence is still new.
Wow, what a technical achievement!
Gate all around (GAA) transistor for the 5nm node 🙂 Great !!!!
Impressive, really cool
Great story, well put together. Thanks for sharing.
Twenty years ago, after riding high on a microprocessor architecture that launched and sustained the PC revolution, the industry faced considerable new hurdles – specifically with the microchip’s speed and scale. Any company that manufactured a device with a chip inside of it needed something new to help them keep up with the incredible demand for […]
We live in an age when technology is transforming every facet of our society. In addition to innovations and inventions that are fundamentally changing lives and spawning new business, tech is also creating entirely new careers in areas such as security, blockchain, AI and health care. But while tech opportunities abound in our global economy, […]
It goes without saying: starting a business is tough, but growing a business is even harder. A recent Harvard study states that 75 percent of venture-backed startups fail. Industry Canada estimates that 85 percent of Canadian businesses that enter the marketplace will reach one full year, while 70 percent will make it to two years and […]