Electronics

The seven deadly sins of IoT strategy and design

Share this post:

A thoughtful approach to IoT strategy and design can lead to unique new product and services opportunities, but designing also becomes increasingly complex when designing for the Internet of Things. Many industries are now struggling with a major challenge that electronics manufacturers have been wrestling with over the past decade or more — how to incorporate software and sensors into previously unconnected products.


The cover of the 7 deadly sins paper

The seven deadly sins of IoT design

Read the guide to avoid the pitfalls of IoT design and learn about the three ways the IoT will change the electronics landscape. Includes ways to boost operations performance; enhance customer experience and how to lead industry transformation.


IoT is also giving companies new options to consider for pricing, business models and partnerships. Products with new sensors, connectivity and compute power enable better ways of measuring product usage and satisfaction. This in turn leads to new “as-as-service” offerings where customers pay for usage or outcomes instead of simply owning a product.

The seven deadly sins of IoT

The best ways to drive differentiation and innovation can vary widely by industry. Something we have learned through thousands of client engagements across many industries is that while there are many different paths to successful strategy and design, there are generally a few things to avoid that apply across all industries. Or, as coined by IBMs IoT designers Sam Winslet and Sophie Riche, the Seven Deadly Sins of IoT. These seven deadly sins illustrate things that are easy to get wrong when developing an IoT strategy and designing or developing IoT capabilities.

Sin #1: greed

Design for your targeted customer segment, not yourself

Companies tend to focus inwardly unless they are deliberately and frequently reminded to look outside the business to their customers, partners and users for inspiration and direction. With IoT, you are not your target user because your target user is often a mix of users across a connected device ecosystem. Therefore, your users have different needs, goals, service requirements and expectations. You must understand your target ecosystem in addition to your directly targeted customer/user segments.

Sin #2: envy

Be differentiated, not simply better

A connected washer or dryer is interesting, but it becomes much more valuable when combined with elements like an automated warranty registration process, a connected service technician network, and a proactive condition monitoring program. These new bundles of functionality are the “new and improved” customer experience now made possible by IoT. Companies keen to avoid the sin of envy should demonstrate contentedness and confidence in the quality of their market research, their customer insights, and their product development. This allows the creation of a differentiated IoT experience and offering, instead of having to engage in a frustrating catch-up race.

Sin #3: gluttony

Just because you can, doesn’t mean you should

With any product or service, it’s important to distinguish between features that are needed and features that are simply possible. This is especially important to remember when developing IoT solutions. It can be easy to import past features, functions or interface elements when those things seem to come “for free” as part of your legacy code or product base. The temptation also exists for companies to simply ‘bolt-on’ new IoT features to existing products, thereby bloating them as well. I think taking a cue from Apple is often the right path with IoT design – ease of use and user experience are often more important than more features.

Sin #4: wrath

Avoid impatience and false assumptions

Wrath, or impatience, can lead to a false assumption of customers’ IoT knowledge and capability. Patience with customers and users is always important, but even more so in those where a loosely defined technological transformation is sweeping across the market. Asking one hundred enterprises to define IoT would likely lead to one hundred different answers. With this in mind, it’s important for any organization developing IoT solutions to be mindful that their customers likely don’t care about IoT. They care how their challenges can be solved, and are often not aware the solution lies within the connected devices and fabric of the Internet of Things.

Sin #5: lust

Manage the desire to connect everything

In the IoT marketplace, it can be difficult to avoid the trap of lust, which manifests itself as a desire to interconnect any and every product to the Internet. In the right situations, for the right customers, extensive IoT interconnectivity is extremely valuable. Yet unbridled lust for IoT-ificiation has its drawbacks. If not properly designed, this over-connectedness leads to more security risks, more complexity for end consumer and more cost to manage.

Sin #6: pride

Avoiding over and under-complication

An IoT solution needs to be usable. Usability is learned from the discipline of regular, honest discussion with users. Pride enters in when an enterprise assumes it knows it users’ needs well enough that it does not need to seek their feedback. It also manifests itself when companies, for financially expedient reasons, decide that they know best for their customers.  This pride can result in, among other things, an overly complicated or an overly simplified IoT experience.

Sin #7: sloth

You must put in the hard work to make it easy for customers

Companies should not assume that users will invest significant amounts of time and energy to explore and adopt their solution. There are too many options for users to consider for them to deal with the headache of complex or puzzling user experience.  This is especially acute if your new IoT-enabled device is replacing the customers’ old non-IoT device, which only took them sixty seconds to setup and use. You can’t afford to give this customer a lengthy setup time or even worse, a setup experience that results in a 30-minute call to customer support. In addition, the customer should be able to quickly and easily exploit the new IoT features of this product. In this setting, therefore, electronics companies have to put in the hard work of design and development to address these concerns, and avoid the trap of sloth, i.e. ramming in huge amounts of IoT functionality in hopes that the customer will just “figure it out” or “call us if there’s a problem.”

These seven deadly sins illustrate things that are easy to get wrong when developing an IoT strategy and designing or developing IoT capabilities. Regardless of which sins you might struggle with, there are three basic steps to ensure a smooth IoT journey.

  1. Start simply with a secure, scalable, open platform
  2. Solve business problems with expertise, applications, and solutions
  3. Build your cognitive strategy

We would love to help you get started on any IoT project, at any stage, and avoid the 7 deadly sins of IoT strategy and design while doing so. You can explore the 7 deadly sins in more depth or reach out to me to discuss any possibilities at @ChrisROConnor.

We will be talking more about Watson IoT platform at InterConnect, it’s not too late to register, or watch the live streams here.

Add Comment
No Comments

Leave a Reply

Your email address will not be published.Required fields are marked *

More Platform Stories
By Chris O'Connor on December 14, 2017

Top 5 IoT trends transforming business in 2018

What a year! 2017 brought us transformation and excitement in the Internet of Things (IoT) space. It’s been a true transformation. We’ve seen almost every industry invest in IoT, and leading industries are quickly moving to implement IoT solutions that drive the bottom line. Consumer products, like wearables and connected electronics, are certainly a large […]

Continue reading

By Wired Brand Lab on November 1, 2017

IoT in electronics is revolutionizing the way we live and work

We tend to think of fitness bands and the refrigerator as separate electronics. They have vastly different costs, functions, and purposes. One’s the size of a bracelet, the other’s the size of, well, a fridge. One tracks steps and heart rate while the other keeps your food dry and cool. The only quality they share […]

Continue reading

By Wired Brand Lab on November 1, 2017

Smarter circuitry instills intelligence and the Internet of Things into business and products

Modern electronics are omnipresent. Sometimes they’re front and center—like when we gawk over the breathtaking colors of a new Ultra HDTV. But more and more, they’re cleverly positioned behind the scenes—like when a smart thermostat turns down the heat after it determines that no one’s at home, or when sensors on an airplane wing identify […]

Continue reading

By Chris O'Connor on July 11, 2017

IDC MarketScape names IBM Watson IoT a Leader in IoT Platforms

An IoT platform must connect devices, must collect data, must handle thousands of vendors, dozens of standards and must be able to scale to millions of devices sending billions of messages. To deliver true value beyond the basics, it must add cognitive, security, privacy, insight generation and close loop automation. With these capabilities and the […]

Continue reading