Security Bulletin: AIX is vulnerable to denial of service due to ISC BIND (CVE-2023-3341)

Remediation/Fixes

A. APARS

IBM has assigned the following APARs to this problem:

Subscribe to the APARs here:

https://www.ibm.com/support/pages/apar/IJ49093

https://www.ibm.com/support/pages/apar/IJ49094

By subscribing, you will receive periodic email alerting you to the status of the APAR, and a link to download the fix once it becomes available.

B. FIXES

IBM strongly recommends addressing the vulnerability now.

For bind.rte on AIX 7.3 and if installed on 7.2 TL5, as well as VIOS 4.1, remediation is a new fileset that is available for download from:

https://www.ibm.com/resources/mrs/assets?source=aixbp

AIX and VIOS iFixes are available for AIX 7.2 TL5 and VIO 3.1. The fixes are cumulative and address previously issued AIX/VIOS BIND security bulletins with respect to SP and TL.

The AIX and VIOS fixes can be downloaded via https from:

https://aix.software.ibm.com/aix/efixes/security/bind_fix25.tar 

The link above is to a tar file containing this signed advisory, fix packages, and OpenSSL signatures for each package. The fixes below include prerequisite checking. This will enforce the correct mapping between the fixes and AIX Technology Levels.

Please note that the above table refers to AIX TL/SP level as opposed to fileset level, i.e., 7.2.5.6 is AIX 7200-05-06.

Note: Two iFixes are provided for AIX 7.2 TL5 SP5 and required if the relevant filesets are installed.

            IJ44424s5 is for the bos.net.tcp.bind_utils fileset.

            IJ49093s7 is for the bos.net.tcp.bind fileset.

Please reference the Affected Products and Version section above for help with checking installed fileset levels.

Note: Two iFixes are provided for:

                VIOS 3.1.3.21, 3.1.3.30

                VIOS 3.1.4.10

Both iFixes are required if the relevant filesets are installed.

                IJ44424s5 is for the bos.net.tcp.bind_utils fileset.

                IJ49093s7 is for the bos.net.tcp.bind fileset.

To extract the fixes from the tar file:

tar xvf bind_fix25.tar

cd bind_fix25

Verify you have retrieved the fixes intact:

The checksums below were generated using the "openssl dgst -sha256 [filename]" command as the following:

These sums should match exactly. The OpenSSL signatures in the tar file and on this advisory can also be used to verify the integrity of the fixes.  If the sums or signatures cannot be confirmed, contact IBM Support at http://ibm.com/support/ and describe the discrepancy.         

openssl dgst -sha256 -verify [pubkey_file] -signature [advisory_file].sig [advisory_file]

openssl dgst -sha256 -verify [pubkey_file] -signature [ifix_file].sig [ifix_file]

Published advisory OpenSSL signature file location:

https://aix.software.ibm.com/aix/efixes/security/bind_advisory25.asc.sig

C. FIX AND INTERIM FIX INSTALLATION

If possible, it is recommended that a mksysb backup of the system be created. Verify it is both bootable and readable before proceeding.

To preview a fix installation:

installp -a -d fix_name -p all  # where fix_name is the name of the

                                            # fix package being previewed.

To install a fix package:

installp -a -d fix_name -X all  # where fix_name is the name of the

                                            # fix package being installed.

Interim fixes have had limited functional and regression testing but not the full regression testing that takes place for Service Packs; however, IBM does fully support them.

Interim fix management documentation can be found at:

https://www.ibm.com/support/pages/managing-interim-fixes-aix

To preview an interim fix installation:

emgr -e ipkg_name -p         # where ipkg_name is the name of the

                                         # interim fix package being previewed.

To install an interim fix package:

emgr -e ipkg_name -X         # where ipkg_name is the name of the

                                         # interim fix package being installed.