Note: Always power-cycle your system when you receive this message. If the system repeats the error message, follow the corrective action for the error message.
- Message
- 0230: System RAM Failed at offset
- Description
- The BIOS cannot initialize the system memory or a DIMM has failed.
- Corrective action
- Check the DIMMs and replace any bad ones by completing the following steps:
- Make sure that each DIMM is seated properly, then power- cycle the system.
- If the problem persists, run the diagnostics to determine which DIMMs failed. Enter the following command at the boot environment prompt:boot_diags
- Select the following test: mem.
- Replace the failed DIMMs.