2-Port Asynchronous EIA-232 PCI Adapter (FC 5723; CCIN 5723)
Learn about the specifications for the 2-Port Asynchronous EIA-232 PCI Adapter.
Overview
The feature code (FC) 5723 is a 2-port EIA-232 asynchronous serial communications PCI adapter that can be installed in the PCI slots. The adapter is based on the PCI Local Bus Specification Revision 2.2 compliant. The adapter is installed in a single slot and is less than a half-size PCI adapter card.
This adapter provides connection for two asynchronous EIA-232 devices. Ports are programmable to support asynchronous protocols over an EIA-232 interface at line speeds up to 128 Kbps. The two port adapter provides RJ45 Ethernet ports connected using DB-9 connectors.
- Exar Dual Async Controller, XR17D152
- EIA-232 compatible
- Supports Xon/Xoff offload
- Supports RTS/CTS or DTR/DSR off-load
- Bus width: 32 bit data and address
- Bus speed: 33 MHz
- Universal signaling
- FCC Class-B
- Power consumption: 1.3 watts (nominal), 2.465 watts (maximum)
- Hardware or software flow control
- Custom baud rates
- 16C850 UART equivalent
For details about slot priorities and placement rules, see the PCI adapter placement topic collection for your system.
Specifications
- Item
- Description
- Adapter FRU number
- 80P4353 (Designed to comply with RoHS requirement)
- I/O bus architecture
- PCI 2.2
- Slot requirement
- For the slot priorities, see the PCI adapter placement topic collection for your system.
- Cables
- Cat 5 unshielded twisted pair cables
- Voltage
- 5 V or 3.3 V
- Form factor
- Short
- Maximum number
- For the maximum adapters supported, see the PCI adapter placement topic collection for your system.
For details about slot priorities and placement rules, see the PCI adapter placement topic collection for your system.
Operating system or partition requirements
- AIX®
- AIX 5.3, or later.
- AIX 5L™ Version 5.2 with the 5200-04 Technology Level, or later.
- Linux
- Red Hat Enterprise Linux version 4.
- SUSE Linux Enterprise Server 9 SP1.