POWER7 information
PCIe2 2-port 10GbE SFP+ Copper Adapter (FC 5288; CCIN 5288)
Learn about the specifications and operating system requirements for the feature code (FC) 5288 adapter.
Overview
The FC 5288 PCIe2 2-port 10GbE SFP+ copper adapter is the full-height version of the FC 5286 adapter, which is the low-profile adapter.
The PCIe2
2-port 10GbE SFP+ copper adapter is
a generation-2 PCIe adapter that provides two 10 Gb copper small form-factor
pluggable transceiver (SFP+) ports for connectivity with other servers
or switches in the network. Each port provides Ethernet connectivity
with a nominal data rate of 10 Gbps (gigabits per second), and they
use SFP+ copper twinaxial cables up to 5 m (16.4 ft) in length.
Note: The
SFP+ twinaxial copper cables have connectors that are not the same
as the AS/400 5250 connector,
the CX4 connector, or the 10 GBASE-T connector.
Each port has a maximum speed of 10 Gbps.
The FC 5288 requires an available slot.
For details about slot priorities and placement rules, see the PCI adapter placement topic collection for your system.
Specifications
- Item
- Description
- Adapter FRU number
- 74Y3459 (Designed to comply with RoHS requirement)
- I/O bus architecture
- PCIe2 x8
- Slot requirement
- Requires an available PCIe x8 low-profile slot
- Cables
- See Cables for details
- Voltage
- 3.3 V
- Form factor
- Short
- Maximum number
- For the maximum adapters supported, see the PCI adapter placement topic collection for your system.
Operating system or partition requirements
This adapter is supported for the following
versions of the operating systems:
- AIX®
- AIX Version 7.1 with Service Pack 3, or later
- AIX Version 6.1 with the 6100-06 Technology Level, and Service Pack 3 or later
- Linux
- Red Hat Enterprise Linux.
- SUSE Linux Enterprise Server.
- For support details, see the Linux Alert website
Cables
Feature code 5288 requires
the use of compatible SFP+, 10 Gbps, copper, twinaxial, active, Ethernet
cables. See Figure 1 for
a view of the cable top and cable bottom. These cables are compliant
with industry standard specifications SFF-8431 Rev 4.1 and SFF-8472
Rev 10.4, and all applicable IBM® i requirements.
Note: These
cables are EMC Class A compliant.
The cables contain
a unique vital product data (VPD) card that includes the vendor name,
part number, EC number, serial number, and date of manufacture. See Table 1 for details about the feature codes.
Figure 1. Top and bottom view of the cable
Cable length | 1 m (3.28 ft) | 3 m (9.84 ft) | 5 m (16.4 ft) |
---|---|---|---|
Feature code | EN01 | EN02 | EN03 |
CCIN | EF01 | EF02 | EF03 |
Part number | 46K6182 | 46K6183 | 46K6184 |