IEA253I DEVSUP 3480X RECORDING MODE DEFAULT IS [NO-COMPACTION|COMPACTION]
DEVSUP ISO/ANSI TAPE LABEL VERSION DEFAULT IS (V3|V4|FORCED V3|FORCED
V4) DEVSUP TAPE OUTPUT DEFAULT BLOCK SIZE LIMIT IS [value|valueK|valueM|valueG;]
DEVSUP COPYSDB DEFAULT is [YES|NO|INPUT|SMALL|LARGE] STORAGE LIMIT
FOR TAPE DDR SWAP IS SET TO xxxxMSTORAGE LIMIT
FOR TAPE DDR SWAP DEFAULTED TO 1000M--or--DEVSUP MTLSHARE=YES SPECIFIED--or--DEVSUP MTL SHARE IS IGNORED--or--DEVSUP
TAPE LIBRARY CATEGORY CODE FOR MEDIAn | ERROR |
PRIVATE=xxxx--or--ENFORCE SMS DATACLASS MEDIA FOR:
ALLMEDIA | MEDIA5PLUS--or--MTL WORM MEDIA ACCEPTED
WHEN NOT PREFERENCED--or--DEVSUPxx XTIOT FOR
NON-VSAM IS SUPPORTED--or--DEVSUP PPRCSUM ENABLED:
VARY 1 DEVICE/LSS FOR UPDATE TO TAKE EFFECT--or--DEVSUP
PPRCSUM DISABLED: VARY 1 DEVICE/LSS FOR UPDATE TO TAKE EFFECT--or--OCE_ABEND_DESCRIPTION NO LONGER HAS AFFECT. USE MPFLSTXX
MEMBER.
--or--DEVSUP SSR FUNCTION IS ENABLED--or--DEVSUP
SSR FUNCTION IS DISABLED
--or--DEVSUP GREATER
THAN 253 TAPE SS ALLOWED--or--DEVSUP
PPRCMT ENABLED|DISABLED--or--DEVSUP
MULTIPLE INCREMENTAL FLASHCOPY: CHANGE RECORDING V2
Explanation
This message is issued to show the ATL media categories
that have been set for this system in the DEVSUPxx parmlib member.
The message is informational, and requires no action or response.
In the message text:
- V3
- Is ISO/ANSI Version 3
- V4
- Is ISO/ANSI Version 4
- Forced V3
- ISO/ANSI Version 3 is being forced
- Forced V4
- ISO/ANSI Version 4 is being forced
- value
- Is a numeric value
- n
- Is a numeric value
- xxxx
- ATL category number to be used by the system
Note: For descriptions of forced and other
DEVSUPxx parameters displayed in this message, see z/OS MVS Initialization and Tuning Reference.
Many
of the possible message text lines are self-explanatory, but the following
require some explanation:
- STORAGE LIMIT FOR TAPE DDR SWAP IS SET TO xxxxM is issued when DDRSIZELIM=[xxxx|xxxxM] is specified in the active DEVSUPxx member of PARMLIB. The value xxxx is the number from 1 to 1000 MB of main storage that is allowed to be used in a Tape DDR swap. The system stores this value in the data facilities area (DFA), for use by the system and by application programs.
- STORAGE LIMIT FOR TAPE DDR SWAP DEFAULTED TO 1000M is issued when DDRSIZELIM keyword is omitted in the active DEVSUPxx member of PARMLIB. The system default for storage usage limit during Tape DDR swap is set to 1000 MB. The system stores this value in the data facilities area (DFA), for use by the system and by application programs.
- DEVSUP MTLSHARE=YES SPECIFIED is issued when MTLSHARE=YES is specified in the active DEVSUPxx member of PARMLIB. This message can be issued on DFSMS 1.2, DFSMS 1.3, and DFSMS 1.4 systems.
- DEVSUP MTL SHARE IS IGNORED is issued when MTLSHARE=YES is specified in the active DEVSUPxx member of PARMLIB. This message can be issued on OS/390® DFSMS Version 2 Release 10 and higher systems.
- DEVSUP TAPE LIBRARY CATEGORY CODE FOR MEDIAn |ERROR |PRIVATE=xxxx is issued when MEDIAn |ERROR |PRIVATE = xxxx is specified in the active DEVSUPxx member of PARMLIB.
- OCE_ABEND_DESCRIPT NO LONGER HAS AFFECT. USE MPFLSTXX MEMBER. is issued if OCE_ABEND_DESCRIPT is specified. Additionally, all OPEN,CLOSE,EOV abend messages are issued using a Message Buffer Manager service. Two lines are now used in issuing the IECxxxx abend message whether or not the VERBOSE option via parmlimb MPFLSTxx is active.
- DEVSUP PERFORM NORMAL EXPIRATION DATE PROCESSING is issued to inform users that expiration dates will be honored and enforced.
- DEVSUP SSR FUNCTION IS ENABLED|DISABLED indicates
that the secondary space reduction function is enabled or disabled.
System action
IPL continues.
Source
DFSMSdfp
Module
IEAVNP16