HZS messages
This section includes the IBM Health Checker for z/OS component messages.
Check messages are documented in the messages or codes book for each element.
- HZS0001I
CHECK(checkowner,checkname): - HZS0002E
CHECK(checkowner,checkname): - HZS0003E
CHECK(checkowner,checkname): - HZS0004I
CHECK(checkowner,checkname): - HZS0005I
SEE THE MESSAGE BUFFER FOR ADDITIONAL MESSAGES - HZS0010I
THE HZSPDATA DATA SET CONTAINS NO RECORDS - HZS0011E
READING THE HZSPDATA DATA SET - HZS0012E
HZSPDATA DATA SET IS FULL. DATA SET NEEDS ROOM FOR n 4096-BYTE RECORDS - HZS0013A
SPECIFY THE NAME OF AN EMPTY HZSPDATA DATA SET - HZS0014E
THE HZSPDATA DATA SET CONTAINS DATA THAT IS NOT VALID. DIAG=diag - HZS0015E
PROBLEM WITH HZSPDATA DATA SET: idataprob - HZS0016I
SYSHZS CTRACE DEFINITION FAILED. RC=rc, RSN=rsn - HZS0017I
COMPONENT TRACE PARMLIB OPTION optname IS NOT VALID - HZS0018I
READING COMPLETE FOR THE HZSPDATA DATA SET - HZS0019A
SPECIFY THE NAME OF AN EMPTY HZSPDATA DATA SET OR C TO CANCEL - HZS0020E
WAITING FOR CHECKS TO COMPLETE - HZS0021E
PERSISTENT DATA OVERLAY HAS BEEN DETECTED. NO MORE WRITING OF PERSISTENT DATA WILL BE DONE - HZS0023I
PERSISTENT DATA DATA SET WAS IGNORED - HZS0024E
modname DETECTED INTERNAL ERROR code WITH DIAGNOSTIC DATA1: diag1 DATA2: diag2 - HZS0100I
IPL-TIME START OF IBM HEALTH CHECKER FOR Z/OS IS BEGINNING - HZS0101I
IBM HEALTH CHECKER FOR Z/OS IS ALREADY ACTIVE - HZS0102I
IBM HEALTH CHECKER FOR Z/OS MUST BE STARTED AS A STARTED TASK. JOB jobname TERMINATES - HZS0103I
procname INITIALIZATION COMPLETE - HZS0104I
procname TERMINATION IS COMPLETE - HZS0105I
SYNTAX ERROR: STATEMENT stmtkeytext - HZS0106I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number: THE statement STATEMENT IS NOT VALID WITHIN A PARMLIB MEMBER. INPUT LINE: input-line - HZS0107I
THE LOG STREAM NAME logstream DOES NOT BEGIN WITH HZS - HZS0108I
ERROR IN PARMLIB MEMBER memname: THE LOG STREAM NAME logstream DOES NOT BEGIN WITH HZS - HZS0109E
IBM HEALTH CHECKER FOR Z/OS ADDRESS SPACE USER IDENTITY DOES NOT HAVE ACCESS TO z/OS UNIX SYSTEM SERVICES - HZS0110I
THE CTRACE STATEMENT IS NOT VALID. - HZS0111I
ERROR IN PARMLIB MEMBER memname: THE CTRACE STATEMENT IS NOT VALID - HZS0112E
COULD NOT OBTAIN RESTART AREA STORAGE - HZS0113E
COULD NOT CONNECT TO RESTART AREA STORAGE - HZS0114I
SYMBOL symbol_name IS ONLY VALID FOR HZSPROC - HZS0115I
IPL-TIME START OF hzsproc_name IS COMPLETE - HZS0117I
hzsproc INITIALIZATION STARTING - HZS0118I
WHEN EVALUATED TO {TRUE | FALSE} IN PARMLIB MEMBER=memname ON LINE linenum - HZS0120I
IBM HEALTH CHECKER FOR Z/OS IS ENDING DUE TO EXCESSIVE ERRORS - HZS0200I
hh.mm.ss CHECK SUMMARY [THERE ARE NO CHECKS THAT MEET THE SPECIFIED CRITERIA]CHECK OWNER&tab;CHECK NAME&tab;STATE&tab;STATUS checkowner&tab;checkname &tab;s1s2s3s4&tab;status checkowner&tab;checkname&tab;s1 d g&tab;SYS=sysname - HZS0201I
hh.mm.ss CHECK DETAIL [THERE ARE NO CHECKS THAT MEET THE SPECIFIED CRITERIA] CHECK(checkowner,checkname) { STATE: state [GLOBAL] STATUS: text STATE: state GLOBAL STATUS: SYS=sysname STATE: state date } [ DIAG: diag1_diag2] EXITRTN: exitrtn { LAST RAN: lastdate&tab;NEXT SCHEDULED: nextdate LAST RAN: lastdate&tab;NEXT SCHEDULED: nextsched LAST RAN: (N/A) &tab;NEXT SCHEDULED: nextdate LAST RAN: (N/A) &tab;NEXT SCHEDULED: nextsched } { INTERVAL: ONETIME INTERVAL: hhh:mm } { EXCEPTION INTERVAL: {SYSTEM ! HALF} EXCEPTION INTERVAL: hhh:mm } SYNCVAL: {SYSTEM|hh:mm|*:mm} SEVERITY: severity DYNAMIC SEVERITY ALLOWED: {YES | NO} WTOTYPE: wtotype DOM: {SYSTEM | CHECK} SYSTEM DESCCODE: sysdesccode ADDITIONAL DESCCODES: adddesccodes ROUTCODES: routcodes { DELETED BY: STMT(polstmt) DELETED BY: HZSCHECK(jobname) DELETED BY: MODIFY COMMAND DELETED BY: SYSTEM DELETED BY: PARMLIB(parmlib) } { MODIFIED BY: modby MODIFIED BY: SYSTEM MODIFIED BY: STMT(polstmt) MODIFIED BY: HZSCHECK(jobname) MODIFIED BY: PARMLIB(parmlib) } [ THERE ARE NO PARAMETERS FOR THIS CHECK] parmtype parms reasonfor reason DEFAULT DATE: defaultdate[USER DATE: userdate ] [ ORIGIN: origin ∨ ORIGIN: HZSPRMhzsprmxx ] [ LOCALE: locale ] [ REXXTSO: rexxtso ] [ REXXOUT DSN: dsn ] [ REXXIN DSN: dsn ] [ REXX TIME LIMIT: timelimit ] DEBUG MODE: debug VERBOSE MODE: verbose REQUIRES USS RESOURCES [ POLICY STATEMENT polstmt WAS NOT APPLIED{ {DATE | SYNCVAL} CONFLICT][ UPDATES ARE PENDING] CATEGORIES: category category category [ INTERNAL DIAGNOSTICS - CHECK TOKEN: token] [ ROUTINE: checkmod-check_addr MSGTBL: msgtable-msgtable_addr FUNC: func] [ ASID: asid FUNC: func] [ LAST CPU TIME: lastcpu MAX CPU TIME: maxcpu] [ REXX REQTOKEN: reqtoken_] - HZS0202I
hh.mm.ss POLICY DETAIL [THERE ARE NO POLICY STATEMENTS THAT MEET THE SPECIFIED CRITERIA] POLICY(polname) STATEMENT: polstmt { ORIGIN: MODIFY COMMAND DATE: date ORIGIN: parmlib DATE: date } pol_op CHECK(checkowner,checkname) CATEGORIES cattype category category category EXITRTN: exitrtn REASON: reason text { INTERVAL: ONETIME INTERVAL: hhh:mm } { EXCEPTION INTERVAL: {SYSTEM ! HALF} EXCEPTION INTERVAL: hhh:mm } SYNCVAL: {SYSTEM|hh:mm|*:mm} SEVERITY: severity WTOTYPE: wtotype DESCCODE: desccodes ROUTCODE: routcodes PARAMETERS: parms DEBUG MODE: debug VERBOSE MODE: verbose catoper CATEGORIES: category category category [ POLICY STATEMENT NOT APPLIED TO ONE OR MORE CHECKS DUE TO {OLD DATE | SYNCVAL}] - HZS0203I
hh.mm.ss HZS INFORMATION POLICY(policy) OUTSTANDING EXCEPTIONS: exceptions (SEVERITY NONE: noneexceptions LOW: lowexceptions MEDIUM: medexceptions HIGH: highexceptions) ELIGIBLE CHECKS: eligiblechecks (CURRENTLY RUNNING: running) INELIGIBLE CHECKS: ineligiblechecks DELETED CHECKS: deletedchecks { ASID: asid LOG STREAM: logstreamname - text ASID: asid LOG STREAM: NOT DEFINED } LOG STREAM WRITES PER HOUR: writerate LOG STREAM AVERAGE BUFFER SIZE: bufsize BYTES [HZSPDATA DSN: dsname VOL: volser]HZSPDATA RECORDS: numpdata PARMLIB: parmlibORIGINAL PARMLIB SOURCE: parmsource - HZS0204I
hh.mm.ss POLICY SUMMARY [THERE ARE NO POLICY STATEMENTS THAT MEET THE SPECIFIED CRITERIA] POLICY(polname)STMT NAME&tab;TYPE&tab;CHECK OWNER&tab;CHECK NAME polstmt&tab;pol_op&tab;checkowner &tab;checkname polstmt&tab;pol_op&tab;checkowner &tab;checkname - HZS0205I
hh.mm.ss POLICY NAMESNAME&tab;NAME&tab;NAME&tab;NAME polname&tab;polname&tab;polname &tab;polname - HZS0344I
THE LOGGER REQUEST HAS COMPLETED. LOG STREAM logstream IS CONNECTED - HZS0345I
THE LOGGER OFF REQUEST HAS COMPLETED - HZS0346I
THE LOGGER REQUEST HAS COMPLETED. THE LOG STREAM IS text - HZS0348E
COULD NOT CONNECT TO LOG STREAM logstream. RETURN CODE: retcode REASON CODE: rsncode - HZS0349E
IBM HEALTH CHECKER FOR Z/OS COULD NOT WRITE TO LOG STREAM logstream. RC: retcode REASON: rsncode NO ADDITIONAL ATTEMPTS WILL BE MADE TO USE THE LOG STREAM UNTIL IT HAS BEEN RESTARTED - HZS0350E
IBM HEALTH CHECKER FOR Z/OS HAS SUSPENDED WRITING TO LOG STREAM logstream. RC: retcode REASON: rsncode ADDITIONAL ATTEMPTS WILL BE MADE TO USE THE LOG STREAM - HZS0400I
CHECK(checkowner,checkname): operation PROCESSING HAS BEEN COMPLETED - HZS0401I
POLICY STATEMENT(polstmt): operation PROCESSING HAS BEEN COMPLETED - HZS0403I
operation PROCESSING HAS BEEN COMPLETED - HZS0404I
CHECK(checkowner,checkname): REFRESH DELETE PROCESSING HAS COMPLETED. NO CHECKS WERE ADDED - HZS0405I
CHECK(checkowner,checkname): DELETE FORCE=YES PROCESSING HAS COMPLETED - HZS0406I
CHECK(checkowner,checkname): ADD PROCESSING WAS NOT SUCCESSFUL. problem - HZS0407I
operation PROCESSING FOUND NO MATCH - HZS0410I
CHECK(checkowner,checkname): operation PROCESSING FOUND NO MATCH - HZS0411I
POLICY STATEMENT(polstmt): REMOVE PROCESSING FOUND NO MATCH - HZS0413I
POLICY STATEMENT(polstmt): ADD NOT DONE, POLICY STATEMENT ALREADY EXISTS - HZS0414I
CHECK(checkowner,checkname): NO MATCHING CHECKS WERE DELETED. REFRESH PROCESSING HAS COMPLETED - HZS0420E
n CHECKS HAVE BEEN FOUND FOR WHICH AT LEAST ONE MATCHING POLICY STATEMENT HAD A CONFLICT WITH THE CHECK VALUES. THE POLICY STATEMENTS WERE NOT APPLIED TO THOSE CHECKS. THE FIRST CASE IS CHECK(checkowner,checkname), MATCHED BY POLICY STATEMENT polstmtTHIS CHECK HAD A {DATE | SYNCVAL} CONFLICT. - HZS0421I
CHECK(checkowner,checkname)UPDATE NOT PROCESSED DUE TO {DATE | SYNCVAL} CONFLICT - HZS1001E
CHECK(checkowner,checkname): AN INSTALLATION PARAMETER ERROR WAS DETECTED. - HZS1002E
CHECK(checkowner,checkname): AN ERROR OCCURRED, DIAG: diag - HZS1003E
CHECK(checkowner,checkname): THE CHECK IS NOT APPLICABLE IN THE CURRENT SYSTEM ENVIRONMENT. - HZS1084I
dsname was not found on volume volume - HZS1085I
Catalog information for dsname could not be retrieved. DIAG=diag - HZS1201E
CHECK(checkowner,checkname): PARAMETER key IS REQUIRED BUT WAS NOT SPECIFIED - HZS1202E
CHECK(checkowner,checkname): PARAMETER key WAS SPECIFIED BUT IS NOT ALLOWED - HZS1203E
CHECK(checkowner,checkname): PARAMETER keyn' IS NOT VALID - HZS1204E
CHECK(checkowner,checkname): UNEXPECTED END OF PARAMETER STRING - HZS1205E
CHECK(checkowner,checkname): A PARAMETER WAS EXPECTED BUT 'parm' WAS FOUND INSTEAD - HZS1206E
CHECK(checkowner,checkname): A DELIMITER WAS EXPECTED BUT 'parm' WAS FOUND INSTEAD - HZS1207E
CHECK(checkowner,checkname): PARAMETER parm HAS TOO MANY VALUES, numvalues - HZS1208E
CHECK(checkowner,checkname): PARAMETER parm HAS TOO FEW VALUES, numvalues - HZS1209E
CHECK(checkowner,checkname): PARAMETER parm IS NOT RECOGNIZED - HZS1210E
CHECK(checkowner,checkname): PARAMETER parm IS MISSING ITS VALUE - HZS1211E
CHECK(checkowner,checkname): PARAMETER parm VALUE 'value' IS TOO LARGE - HZS1212E
CHECK(checkowner,checkname): PARAMETER parm VALUE 'value' IS TOO SMALL - HZS1213E
CHECK(checkowner,checkname): PARAMETER parm VALUE 'value' IS TOO LONG - HZS1214E
CHECK(checkowner,checkname): PARAMETER parm VALUE 'value' IS TOO SHORT - HZS1215E
CHECK(checkowner,checkname): PARAMETER parm VALUE 'value' IS NOT DECIMAL - HZS1216E
CHECK(checkowner,checkname): PARAMETER parm VALUE 'value' IS NOT HEXADECIMAL - HZS1217E
CHECK(checkowner,checkname): PARAMETERS WERE SPECIFIED BUT NONE ARE ALLOWED - HZS1218E
CHECK(checkowner,checkname): PARAMETER NUMBER n WAS NOT PROCESSED - HZS1219E
CHECK(checkowner,checkname): MIXING POSITIONAL AND KEYWORD FORMATS IS NOT ALLOWED - HZS1220E
CHECK(checkowner,checkname): parm1 IS NOT ALLOWED WITH parm2 - HZS1300I
EXEC exec DID NOT ISSUE 'CALL HZSLSTRT' - HZS1301I
EXEC exec DID NOT COMPLETE SUCCESSFULLY. [AXREXX COULD NOT ALLOCATE: dataset] AXREXX SERVICE RETURN CODE: axrexxrc REASON CODE: axrexxrsn AXREXX DIAG RETURN CODE: diagrc REASON CODE: diagrsn - HZS1302I
CHECK COULD NOT BE STARTED. {AXREXX ! IEAVRLS} RC: rc REASON: rsn