NOALIGN primary command — display data without aligning

Use the NOALIGN primary command to cause the BROWSE option to display addresses in the left column not to be aligned on a X'10' or X'20' boundary.
  • Syntax
    NOALIGN
  • Usage notes
    • NOALIGN can be used only from the storage panel of the BROWSE option.
    • The BROWSE option begins options displaying storage in a X'10' or X'20' boundary (ALIGN mode).
    • NOALIGN persists until the ALIGN primary command is issued or until you exit the BROWSE option.
    • If you scroll past an area of unavailable storage while in NOALIGN mode, the display becomes aligned again. Changing your location to an unaligned address will return to a NOALIGN display.
Example: The following screen depicts the use of the NOALIGN primary command where the addresses are not on a X'10' boundary (if your screen width is less than 136) or X'20' boundary (if your screen width is at least 136).
ASID(X'000C') ADDRESS(8FADC8.) STORAGE --------------------------------------
Command ===>                                                                 
008FADC8   8EE1A800   D4E2E3D9   68000000   008FADB0   | ..y.MSTR........ |  
008FADD8   008DBFD0   00000000   008FADB0   00000000   | ...}............ |  
008FADE8   00000000   00000000   00000000   00000000   | ................ |  
008FADF8   00000000   00000000   00000000   0083D600   | .............cO. |  
008FAE08   00000000   00000000   00000000   00000000   | ................ |  
008FAE18   00000000   00000000   008FB3B8   844E7DC0   | ............d+'{ |  
008FAE28   044E83E0   008FF6F8   008FCD98   008EE638   | .+c\..68...q..W. |  
008FAE38   7FFC9DE8   008FADB0   008FAFB0   008DBFC8   | "..Y...........H |  
008FAE48   008EE1B8   008FCD98   008FF300   00F53D00   | .......q..3..5.. |  
008FAE58   008DAE88   844E749A   008EE638   8EE62801   | ...hd+....W..W.. |  
008FAE68   000000B0   00000000   00000000   008EE628   | ..............W. |  
008FAE78   00100000   008FAE60   008FAE7C   044E83D8   | .......-...@.+cQ |  
008FAE88   00000000   008FAE90   008EE0F8   8EE0E800   | ..........\8.\Y. |  

CPU(X'01') ASID(X'0001') ADDRESS(18.) STORAGE -----------------------------------------------------------------------------------------
Command ===>                                                                                                                           
00000018   7FFFF000   7FFFF000   7FFFF000   7FFFF000   7FFFF000   7FFFF000   00000000   00000000   | ".0.".0.".0.".0.".0.".0......... |
00000038   7FFFF000   7FFFF000   00000000   00000000   00000000   00FD6D58   00000000   00000000   | ".0.".0..............._......... |
00000058   000A0000   000140E1   000A0000   000150E1   000A0000   000160E1   000A0000   000170E1   | ...... .......&.......-......... |
00000078   000A0000   000180E1   00000000   00001202   00020003   00060028   00000000   00000000   | ................................ |
00000098   00000000   00000000   0A000001   01345C08   00000048   01081401   00000000   00000000   | ..............*................. |
000000B8   0001000E   02372EE0   18000006   00000000   FBE3FFFB   FCFF4802   780C0000   00000000   | .......\.........T.............. |
000000D8.:F7. LENGTH(X'20')--All bytes contain X'00'