Figure 1 shows the recovery of a backup volume from primary objects that reside on a tape volume. A total of 4636 objects were identified as residing on the backup volume. The Volume Recovery utility attempted to recover 1496 of these objects, but processing was stopped due to a repeating read error.
The Volume Recovery utility was unable to determine how many of the objects were successfully recovered before the failure occurred and how many remain on the volume being recovered, so the system issued message CBR9862I indicating limited recovery for the volume. The "Successful", "Unsuccessful", and "Remaining" values in message CBR9863I show statistics of **** because those values could not be accurately determined.
F OAM,S,RECOVERY,CMW212
CBR1000I OAM S command execution scheduled.
CBR9800I OAM Volume Recovery starting for volumes CMW212 and N/A.
CBR9827I OAM Volume Recovery.
The following TAPE volumes are needed for recovery:
CMW222
0013 CBR9810D Reply 'QUIT' to terminate or 'GO' to proceed with recovery.
R 13,GO
IEE600I REPLY TO 0013 IS;GO
CBR9852I Volume Recovery Utility processing objects in storage group GROUP06 for volume CMW212.
CBR9103I A READ error occurred during Storage Management Processingfor BACKUP for Collection
GROUP06, Object GROUP06.C1C0.HQ2020, in
Storage Group BACK1, on volume CMW222.
The return code is 0000000Cand the reason code is 00000910.
CBR9915I Module CBRHROPT is stopping OSMC control task CMW212 because of repeating error condition CBR9103.
CBR9862I Volume Recovery status for volumes CMW212 and N/A is limited.
CBR9863I Volume Recovery status for volumes CMW212 and N/A.
Total: 4636, Attempted: 1496, Successful: ****, Unsuccessful: ****,
Remaining: ****.
CBR9819I OAM Volume Recovery is ending for volumes CMW212 and N/A.