>>-+-MODIFY-+---------------------------------------------------> '-F------' .-,BACKUP1-. >--OAM,-+-START-+-,-RECOVERY,volser-+----------+-+---------+--->< '-S-----' '-,BACKUP2-' '-,DELETE-'
To recover an optical or tape volume:
F OAM,START,RECOVERY,volser,BACKUP1
where volser is the volume serial number of one of the volumes that is being recovered.
If more than one backup copy of the objects exists, you can select whether to use the first or second backup copy for the recovery by specifying BACKUP1 or BACKUP2 on the F OAM,START,RECOVERY command when recovering a PRIMARY volume. If you omit BACKUP1 and BACKUP2, OAM recovers the first backup copy of the object by default.
To recover a primary volume, all of the backup volumes containing backup copies of the object on the primary volume are needed whether they are optical or tape. Also, to recover a backup volume, each Object storage group must be searched for objects that have a backup copy on the backup volume to be recovered. For each of these objects, the primary copy is used to recover the backup volume. The primary copy of these objects could be on disk (DB2 or file system), optical, or tape. The Volume Recovery utility must identify the optical and tape volumes that are needed for the recovery.
If the member name associated with the optical or tape volume serial number specified on this command is not the member name for this instance of OAM, the command fails. OAM issues message CBR1068I.
_______________________________________________________
CBR1000I OAM START command execution scheduled.
CBR9800I OAM Volume Recovery starting for volumes volser1 and volser2.
CBR9827I OAM Volume Recovery. The following TAPE volumes are needed
for recovery: volser1 volser2 volser3 volser4 volser5
volser6 volser7 volser8 volser9
CBR9824I OAM Volume Recovery. The following OPTICAL volumes are needed
for recovery: volser1 volser2 volser3 volser4 volser5
volser6 volser7 volser8 volser9.
Message CBR9800I indicates that volume recovery has started for volumes volser1 and volser2. In situations where a tape volume is being recovered, volser2 is labeled as N/A.
Message CBR9824I gives you a list of optical volumes to retrieve that are identified by volser-n. This message allows you to get the optical volumes that are needed for recovery processing.
Message CBR9827I gives you a list of tape volumes to retrieve that are identified by volser-n. This message allows you to get the tape volumes that are needed for recovery processing.
_______________________________________________________
CBR9810D Reply ‘QUIT’ to terminate or ‘GO’ to proceed with recovery.
_______________________________________________________
If you reply QUIT to CBR9810D, the system issues the following messages:
CBR9862I Volume Recovery status for volumes volser1 and volser2 is not available.
CBR9819I OAM Volume Recovery is ending for volumes volser1 and volser2
_______________________________________________________
_______________________________________________________
CBR4400A Mount volume volser on drive drive-name.
Shelf location is shelfloc.
_______________________________________________________
IEC501A M drive-Addr,volser,label,,,,data_set_name.
Message CBR9824I might identify volumes that are either library-resident or shelf-resident optical volumes. The system automatically mounts the library-resident optical volumes; therefore, a mount message is not issued for them. The mount message CBR4400A requests only shelf-resident optical volumes for recovery.
_______________________________________________________
When recovery is complete, the system issues the following message:
CBR9819I OAM Volume Recovery is ending for volumes volser1 and volser2
_______________________________________________________
F OAM,S,RECOVERY,WG360A,BACKUP2
CBR1000I OAM S command execution scheduled.
CBR9800I OAM Volume Recovery starting for volumes WG360A and WG360B.
CBR9827I OAM Volume Recovery.
The following TAPE volumes are needed for recovery:
TNN005
CBR9824I OAM Volume Recovery.
The following OPTICAL volumes are needed for recovery:
WG688A
CBR9810D Reply 'QUIT' to terminate or 'GO' to proceed with recovery.
If you reply GO, the system issues the following messages:
CBR9852I Volume Recovery Utility processing objects in storage group GROUP22
for volume WG360A.
IEC501A M 1D04,TNN005,SL,COMP,OAM,OAM,OAM.BACKUP2.DATA
CBR4401I Volume WG830B mounted on drive P9D3.
CBR9863I Volume Recovery status for volumes WG360A and WG360B.
Total: 5, Attempted: 5, Successful: 5, Unsuccessful: 0, Remaining: 0.
CBR9819I OAM Volume Recovery is ending for volumes WG360A and WG360B.
If you reply QUIT, the system issues the following messages:
CBR9862I Volume Recovery status for volumes WG360A and WG360B is not available.
CBR9819I OAM Volume Recovery is ending for volumes WG360A and WG360B.
If any errors occur during the volume recovery process, additional messages might be issued identifying the errors.
CBR9863I Volume Recovery status for volumes volser1 and volser2.
Total: total, Attempted: attempted, Successful: successful
Unsuccessful: unsuccessful, Remaining: remaining
CBR9864I A total of object-count objects on volumes volser and volser2 do not have
a {1st|2nd} backup copy.
For a description of the messages, see z/OS MVS System Messages, Vol 4 (CBD-DMO).