If you want to enter more than two key parts, you must enter one or more intermediate key parts. Enter intermediate key parts after you enter the first key part and prior to entering the final one.
The Coprocessor Management panel appears.
CSFDKE50 -------------- ICSF - Master Key Entry ---------
COMMAND ===>
AES new master key register : EMPTY
DES new master key register : PART FULL
ECC new master key register : EMPTY
RSA new master key register : EMPTY
Specify information below
Key Type ===> DES-MK (AES-MK, DES-MK, ECC-MK, RSA-MK)
Part ===> MIDDLE (RESET, FIRST, MIDDLE, FINAL)
Checksum ===> 58
Key Value ===> 12021945CADE8431
===> 04091939BABE9632
===> 0000000000000000 (AES-MK, ECC-MK and RSA-MK only)
===> 0000000000000000 (AES-MK, ECC-MK only)
Press ENTER to process.
Press END to exit to the previous menu.
In this example we are continuing to enter the DES-MK master key.
If the checksum entered in the checksum field matches the checksum that the master key entry utility calculated, the key part is accepted. The message at the top of the panel states KEY PART LOADED, as shown in Figure 2. The new master key register status changes to PART FULL. The verification pattern and hash pattern that are calculated for the key part appear near the bottom of the panel.
Compare them with the patterns generated by the random number generator or provided by the person who gave you the key part value to enter.
CSFDKE50 -------------- ICSF - Master Key Entry --------KEY PART LOADED-
COMMAND ===>
AES new master key register : EMPTY
DES new master key register : PART FULL
ECC new master key register : EMPTY
RSA new master key register : EMPTY
Specify information below
Key Type ===> ___ (AES-MK, DES-MK, ECC-MK, RSA-MK)
Part ===> ______ (RESET, FIRST, MIDDLE, FINAL)
Checksum ===> 00
Key Value ===> 0000000000000000
===> 0000000000000000
===> 0000000000000000 (AES-MK, ECC-MK and RSA-MK only)
===> 0000000000000000 (AES-MK, ECC-MK only)
Press ENTER to process.
Press END to exit to the previous menu.