Explanation
An unexpected error occurred during Basic HyperSwap® processing. This
abend can be used for entry into a recovery routine that captures
additional documentation and then attempts to try again. In other
cases, the 2E0 abend is percolated to an application recovery routine
or another system component recovery routine.
- xxxxCyyy
- Internal reason codes for Basic HyperSwap socket support.
IOSHMSUS- 00010001
- IXCSETUS macro returned a parameter error or environment error
return code.
- 00010002
- IXCSETUS macro returned an unexpected return code.
IOSHMMSG- 00020001
- Input message request qualifier is not defined.
- 00020002
- Input message request type is not defined.
IOSHIPCR- 00030001
- Redundant PC routine initialization call is detected.
- 00030002
- IOSHMPCR entry point is unresolved.
- 00030003
- Basic HyperSwap address
space authorization failed.
- 00030004
- Basic HyperSwap address
space linkage table index reserve failed.
- 00030005
- IOSHMPCR ETCRE macro request failed.
- 00030006
- IOSHMPCR ETCON macro request failed.
IOSHMPAR- 00040001
- Input message request type is not defined.
IOSHMCIT- 00050001
- CSVDYNEX DEFINE IOSHSWAP_EXIT macro request failed.
- 00050002
- Input message request type is not defined.
- 00050003
- CSVDYNEX UNDEFINE IOSHSWAP_EXIT macro request failed.
IOSHMHST- 00060001
- Input message request type is not defined.
- 00060002
- Input message request is not received on the master processor.
IOSHMCMT- 00070001
- Input message request type is not defined.
- 00070002
- IOSXTIM macro request failed.
- 00070003
- Input message request was not received on the master processor.
IOSHINTT- 00080001
- Task termination wait time for a Basic HyperSwap task has been exceeded.
IOSHMENF- 000F0001
- Unable to locate input device UCB.
- 000F0002
- Unable to retrieve configuration data record (CRD) information.
- 000F0003
- Unable to locate device node descriptor (NED) information.
- 000F0004
- IOSHXSND macro request failed. Unable to deliver ENF signal.
IOSHMCFG- 00100001
- Input message request type is not defined.
- 00100002
- Response from the master member’s configuration validation
task (IOSHMCF2) is missing.
- 00100003
- Response from the configuration validation task (IOSHMCF2) on
one of the slave members is missing.
- 00100004
- Unable to locate member information in the Basic HyperSwap global information (GMI) table.
IOSHMCF2- 00110001
- Input message request type is not defined.
- 00110002
- Response from the HyperSwap API
services interface task is missing.
IOSHMPED- 00120001
- Input message request type is not defined.
IOSHIMSG- 00130001
- IXCQUERY macro request failed.
- 00130002
- IXCJOIN macro request failed.
IOSHMEPT- 00140001
- Unrecognized Basic HyperSwap operator
command is received from SSI.
- 00140002
- Incorrect operator command parameter list (CSCB) is received from
SSI.
- 00140003
- Unrecognized Basic HyperSwap command
from the application user exit.
- 00140004
- Incorrect parameter list information from the application user
exit.
- 00140005
- Input message request type from the SSI (IOSHMSSM) is not defined.
- 00140006
- Input message request qualifier from the SSI (IOSHMSSM) is not
defined.
- 00140007
- Input message request type from subordinate task (IOSHMEPT) is
not defined.
- 00140008
- Incorrect operator command parameter list (CSCB) length from subordinate
task (IOSHMEPT).
- 00140009
- IOSHXSND macro failed to send request to IOSHMEPT on the master.
- 0014000A
- IOSHXSND macro failed to send request to IOSHMHST on the master.
- 0014000B
- IOSHXSND macro failed to send request to IOSHMCIT.
- 0014000C
- IOSHXMAC macro enable request failed.
- 0014000D
- IOSHXMAC macro disable request failed.
- 0014000E
- IOSHXMAC macro PPRC suspend request failed.
- 0014000F
- IXCMSGI service failed.
- 00140010
- A system timed out during FREEZE.
- 00140011
- IOSHXSND to IOSHMBLK on Master failed.
IOSHISSI- 00150001
- IEFSSVT macro CREATE request failed.
- 00150002
- IEFSSVT macro EXCHANGE request failed.
- 00150003
- IEFSSVT macro DISABLE request failed.
- 00150004
- IEFSSI macro PUT request failed.
- 00150005
- IEFSSI macro ACTIVATE request failed.
- 00150006
- IEFSSI macro DEACTIVATE request failed.
- 00150007
- IEFSSI macro QUERY request failed.
- 00150008
- IEFSSI macro ADD request failed.
- 00150009
- SSI Broadcast Message START request (IEAVG700) failed.
- 0015000A
- SSI Broadcast Message STOP request (IEAVG700) failed.
IOSHMOPR- 00170001
- Operator requested Basic HyperSwap SVC
dump.
IOSHMSND - 00180001
- IOSHXSND macro processing error occurred and caller requested
the DumpOnError parameter option.
IOSHXREC - 00190001
- Rsn Code 1 - Unable to establish an ESTAE.
IOSHMMQM - 001A0001
- IOSHXMAC macro processing error. Request code is not defined.
IOSHMXUS - 001B0001
- IXCSTATUS macro request failed.
IOSHMTKX - 001C0001
- Unable to locate TCB in the Basic HyperSwap task table.
IOSHMTKX - 001D0001
- GetMasterOwner processing failed.
IOSHMBLK- 001E0001
- Invalid message received.
IOSHMHS2- 001F0001
- Invalid message received.
IOSHMCM2- 00200001
- Invalid message received.
IOSHMBPT- 00210001
- Invalid message received.
IOSHMEP2- 00220001
- Invalid message received.
IOSHME64- 00230001
- IOSHXSND macro failed to send request to IOSHMEPT on the Basic HyperSwap master system.
- 00230002
- UCBPIN request for a device in an active MetroMirror configuration
failed.
- 00230003
- UCBPIN UNPIN request for a device in an active MetroMirror configuration
failed.
IOSHSAPI - 80000001
- Dump option requested for HyperSwap API
services wSwap (FC=3) request timeout.
IOSHSSUB - 80010001
- Query PPRC pair status I/O error encountered.
- 80010002
- Terminate PPRC pair I/O error encountered.
- 80010003
- IOSVSWAP routine call failed.
- 80010004
- Query unit address configuration I/O error encountered.
- 80010005
- UCBINFO macro on PAVINFO request failed.
- 80010008
- Read DASD volume Label I/O error encountered.
- 80010009
- Write DASD volume Label I/O error encountered.
- 8001000A
- UCBLOOK macro request failed.
- 8001000B
- IOSVMSCQ routine request failed.
- 8001000C
- IEFSSREQ macro request failed.
- 8001000D
- Establish PPRC pair I/O error encountered.
- 8001000E
- Establish PPRC pair I/O error encountered.
- 8001000F
- IOSCFT macro request failed.
- 80010011
- IOPTHVAL macro request failed.
- 80010012
- IOSSLFD macro request failed.
IOSHSENF - 80020001
- UCBPIN macro request failed.
- 80020002
- UCBPIN macro token count error encountered.
System action
The system might request an SVC dump and may write
messages related to the problem.
Operator response
Notify the system programmer.
System programmer response
Search problem reporting databases
for a fix for the problem. If no fix exists, contact the IBM® Support Center. Provide the messages, the
logrec data set record, the SYSOUT output for the job, and the dump.
Source
Input/output supervisor HyperSwap function (IOSH)
Module
See individual reason codes.
z/OS MVS System Codes
Copyright IBM Corporation 1990, 2014