I/O Queuing Configuration Data Section

This section contains one per channel path within a logical control unit described by triplet R79ECPDS.

Offsets		Name	Length	Format	Description
0	0	R79ECPID	1	binary	Channel path identifier.
1	1	R79ECPST	1	binary	Channel path status Bit Meaning when set 0 Channel path installed 1 Channel path online 2 Channel path varied 3 Channel path offline to all devices of the LCU 4 Channel path connection to devices of the LCU altered by VARY PATH processing 5 Reserved. 6 Channel path is DCM managed. 7 CHPID manipulated, requiring data reset.
2	2	R79ECUN	2	binary	Number of control units attached.
4	4	R79ECU1	2	binary	First control unit identifier.
6	6	R79ECU2	2	binary	Second control unit identifier.
8	8	R79ECU3	2	binary	Third control unit identifier.
10	A	R79ECU4	2	binary	Fourth control unit identifier.
12	C	R79ECUB	4	binary	Number of initial selection attempts that were unsuccessful because the control unit was busy.
16	10	R79EPT	4	binary	Number of I/O operations accepted on this channel path.
20	14		4		Reserved.
24	18	R79EDPBC	4	binary	Number of initial selection attempts that were unsuccessful because the director port was busy.
28	1C	R79ECBT	4	binary	Control unit busy delay time.
32	20	R79ECMR	4	binary	Initial command response time.
36	24	R79ESBS	4	binary	Switch busy count summation; contains the switch busy counts received for all partitions.
40	28		4		Reserved.
44	2C	R79ECPXF	1	binary	Channel path extended flags Bit Meaning when set 0 Extended I/O measurement block available 1-7 Reserved.
45	2D	R79ECPAT	1	binary	Path attributes Value Meaning 0 Not specified for this path. 1 Preferred path. 2 Non-preferred path.
46	2E		2		Reserved.