4(X'04') |
RPLEODER |
End of data
set encountered (during sequential
retrieval). Either no EODAD routine is provided, or one is provided
and it returned to VSAM and the processing program issued another
GET. |
8(X'08') |
RPLDUP |
Attempt was
made to store a record with a duplicate
key. |
12(X'0C') |
RPLSEQCK |
Attempt was
made to store a record out of ascending
key sequence; record may also have a duplicate key. |
16(X'10') |
RPLNOREC |
Record not found. |
20(X'14') |
RPLEXCL |
- For MACRF=RLS, this code means that there
was an intra-LUDWID
exclusive control conflict.
- For non RLS, record already held
in exclusive control by another
requester.
|
21(X'15') |
|
For MACRF=RLS, the
request was rejected due to
deadlock; the deadlock was resolved by rejecting this request. |
22(X'16') |
|
For MACRF=RLS, the request
was rejected due to
timeout. The request was presumed to be an inter resource manager
deadlock. |
24(X'18') |
RPLNOMNT |
- For
MACRF=RLS, lock request rejected because the lock is held
by a failed subsystem.
- For non RLS, the record resides on
a volume that cannot be mounted.
|
28(X'1C') |
RPLNOEXT |
Data set cannot be extended because VSAM cannot
allocate additional direct-access storage space. Either there is not
enough space left in the data space for the secondary-allocation request
or an attempt was made to increase the size of a data set by splitting
the control area (high used RBA change) during processing with SHROPT=4
and DISP=SHR. |
32(X'20') |
RPLINRBA |
An RBA was specified that does not give the address of any data
record in the data set.
This error will be returned by register 10 and register 8
if the RBA provided addresses a relative CI greater than 4GB.
|
36(X'24') |
RPLNOKR |
Key ranges were specified
for the data set when
it was defined, but no range was specified that includes the record
to be inserted. |
40(X'28') |
RPLNOVRT |
Insufficient
virtual storage in the address space
to complete the request. Or there is insufficient storage available
to dynamically add another string. For DFSMStvs, this indicates that
DFSMStvs was unable to expand the pool for its context or unit of
recovery-related control blocks. |
44(X'2C') |
RPLINBUF |
Work area
not large enough for the data record
(GET with OPTCD=MVE). |
48(X'30') |
RPLINTRM |
Invalid options,
data set attributes, or processing
conditions specified for TERMRPL request: - CNV
processing
- The specified RPL is asynchronous
- Chained
RPLs
- PATH processing
- Shared resources (LSR/GSR)
- Create
mode
- RRDS
- Data set contains spanned records
- User
not in Key 0 and supervisor state
- EOV in process (secondary
allocation).
|
52(X'34') |
RPLPTERM |
The previous
request was TERMRPL. |
54(X'36') |
RPLCAREC |
CA reclaim
or CA reclaim recovery processing
encountered an error. |
56(X'38') |
RPLCTERR |
- For
MACRF=RLS, RPL reuse violation. The RPL request contained
positioning information from a previous request and the ACB or LUDWID
specified in the RPL did not match the previous ACB or LUDWID.
- For
non RLS, error from catalog update at the beginning of a CI/CA
split for a backup while opening a data set.
|
60(X'3C') |
RPLCTERR |
Available for RLS and DFSMStvs use. |
64(X'40') |
RPLNOPLH |
- For RLS and DFSMStvs, the limit of 1024
outstanding requests for
this ACB has been exceeded.
- As many requests are active as
the number specified in the STRNO
parameter of the ACB macro; therefore, another request cannot be activated.
- Or there is insufficient storage available to dynamically add
another string.
|
68(X'44') |
RPLINACC |
Attempt was
made to use a type of processing (output
or control-interval processing) that was not specified when the data
set was opened. |
72(X'48') |
RPLINKEY |
- For RLS and DFSMStvs, add GETIX or PUTIX to any
data set organization.
- For non RLS and DFSMStvs, one of the
following may apply:
- Keyed GET request for
an ESDS
- GETIX or PUTIX to ESDS
- Fixed length RRDS
|
76(X'4C') |
RPLINADR |
- An ADR or CI PUT was issued to add a record to a
KSDS or VRRDS
- Or a CI PUT was issued to a fixed length RRDS.
|
80(X'50') |
RPLERSER |
An ERASE request
was issued for access to an ESDS
or CI. |
84(X'54') |
RPLINLOC |
- OPTCD=LOC
was specified for a PUT request or in the previous request
parameter list, in a chain of parameter lists.
- LOC not supported
(RLS only)
|
88(X'58') |
RPLNOPTR |
A sequential
GET or PUT request was issued without
VSAM having been positioned for it, or a change was made from addressed
access to keyed access without VSAM having been positioned for keyed
sequential retrieval, or an illegal switch between forward and backward
processing was attempted. |
92(X'5C') |
RPLINUPD |
A PUT, ERASE,
or IDALKCD was issued without a
previous GET for UPDATE. Or a PUTIX was issued without a previous
GETIX. |
96(X'60') |
RPLKEYCH |
- For
RLS and DFSMStvs, PUT NUP attempt to change key specified
by previous IDALKADD request.
- For non-RLS and DFSMStvs, an
attempt was made to change the prime
key or the reference key during an update.
|
100(X'64') |
RPLDLCER |
Attempt was made to change the length of a record
during an addressed update. |
104(X'68') |
RPLINVP |
The RPL options
are either invalid or conflicting
in one of the following ways: For RLS
and DFSMStvs only: - IDARECOV, IDALKREL, IDAINQRC, IDARETLK,
or IDAQUIES issued and
ACB is not an RLS Control ACB.
- A Record Management GET or
PUT was issued against an RLS Control
ACB.
- No LUWID specified for IDALKREL, IDARETLK, or IDALKCD.
- SUBSYSNM was specified in ACB at OPEN, but GET, IDALKADD, PUT,
POINT, or ERASE specified LUWID=0.
- RLS options (LUWID, read
integrity options, cold start) are not
supported for NSR/GSR/LSR access.
- CNV access specified for
RLS access or an extended function data
set.
- ADR access to KSDS for RLS.
- Invalid record management
request issued against a control ACB.
- Non-commit protocol
application specified:
- CRE on POINT or GET
NUP
- KL on GET UPD to a recoverable sphere
- Invalid
RLS request: LSR or MSS request macros, GETIX, or PUTIX.
- IDAEADD
is invalid for KSDS, RRDS, or VRRDS.
|
108(X'6C') |
RPLINLEN |
RECLEN specified was larger than the maximum allowed,
equal to 0, smaller than the sum of the length and the displacement
of the key field, or not equal to record (slot) length specified for
a relative record data set. |
109(X'6D') |
RPLIXBD2 |
VSAM has detected
an invalid index record. |
112(X'70') |
RPLKEYLC |
KEYLEN specified
was too large or equal to 0. |
116(X'74') |
RPLINLRQ |
- Available
for RLS and DFSMStvs.
- For non RLS, invalid request during
load mode. A GET, POINT, ERASE,
direct PUT, skip sequential PUT, or PUT with OPTCD=UPD not permitted
during initial data set loading (that is, for storing records in the
data set the first time it is opened).
|
120(X'78') |
RPLINTCB |
Current job step TCB is not correct one. For RLS,
request issued in cross-memory mode. |
124(X'7C') |
RPLUEXCL |
- Available for RLS and DFSMStvs.
- For
an application that does not use RLS or DFSMStvs, a request
was canceled from a user JRNAD exit.
|
128(X'80') |
RPLIXHHP |
Index is invalid, request cannot be completed. |
132(X'84') |
RPLSRLOC |
- Available
for RLS and DFSMStvs.
- For an application that does not use
RLS or DFSMStvs, an attempt
was made in locate mode to retrieve a spanned record.
|
136(X'88') |
RPLARSRK |
- Available
for RLS and DFSMStvs.
- For an application that does not use
RLS or DFSMStvs, an addressed
GET was issued for a spanned record in a key-sequenced data set.
|
140(X'8C') |
RPLSRISG |
Inconsistent
spanned-record segments. |
144(X'90') |
RPLNBRCD |
Invalid pointer
in an alternate index (no associated
base record). |
148(X'94') |
RPLNXPTR |
The maximum
number of pointers in the alternate
index has been exceeded. |
152(X'98') |
RPLNOBFR |
- For
LSR, RLS, and DFSMStvs, not enough buffers are available to
process the request.
- For RLS and DFSMStvs, the dataspace buffer
pool was exhausted.
|
156(X'9C') |
RPLINCNV |
An invalid
control interval was detected during
keyed processing. The possible invalid conditions are: - A key is not greater than the previous key.
- A key is not
in the current control interval.
- A spanned record RDF is encountered.
- A freespace pointer is invalid.
- The number of records
does not match a group RDF record count.
- A buffer is constantly
invalidated while running with RLS. Among
the likely causes are:
- The CF cache structure
is too small
- The application constantly updates the same control
interval.
|
158(X'9E') |
RPLNOACC |
For RLS,
this system has found the data set corrupted
and cannot access it. Please close the data set, restore it, and re-open
to re-access it if necessary. |
160(X'A0') |
RPLBMWER |
A request
was issued to invalidate a modified
buffer. For RLS, the required quiesce exit does not exist. |
161(X'A1') |
RPLQCLRJ |
QUICLOSE request is rejected because the sphere
is already marked quiesced. |
162(X'A2') |
RPLQUIRJ |
The quiesce
status of the sphere means this IDAQUIES
request cannot be accepted from this application. Issued for the following:
- This is a QUICMP request and field QUIERTOK in the IFGQUIES
parameter
area does not contain a request token corresponding to a QUIESCE exit
invocation that VSAM is waiting for a QUICMP response from this application.
- This QUICEND or QUIBEND request is rejected because the application
signalled completion of its processing for this QUICOPY or QUIBWO
event.
- This QUICEND or QUIBEND request is rejected because
the applications'
QUIESCE exit was not driven for this QUICOPY or QUIBWO event.
|
163(X'A3') |
RPLQACBO |
IDAQUIES type QUICMP
request rejected. ACBs for
the sphere remain open for the application and this is an IDAQUIES
type QUICLOSE. |
165(X'A5') |
RPLQNONR |
For RLS and
DFSMStvs, either the IDARECOV request
was specified as TYPE=LL and the sphere was not in lost locks state
for this subsystem, or TYPE=NONRLS was specified and the sphere was
not in NONRLSUPDATE permitted state. |
167(X'A7') |
RPLQNSUP or
RPLQINVR
|
For RLS, IDAQUIES types
QUIBWO, QUICOPY, caller
is not in supervisor state; invalid Quiesce request; or the eye-catcher
in IFGQUIES is invalid. |
168(X'A8') |
|
For RLS and DFSMStvs,
the RPLAREA was 0. |
169(X'A9') |
RPLQCTGF |
For RLS and
DFSMStvs, the IDAQUIES, IDARETLK TYPE=SS,
IDARECOV TYPE=LL, or IDARECOV TYPE=NONRLS request failed because
the Catalog Locate command issued for the specified sphere or component
name failed. |
170(X'AA') |
RPLQUNFL |
The QUIOPEN,
QUICEND, or QUIBEND request is rejected
because the requested unquiesce operation is already started for this
sphere. |
172(X'AC') |
RPLNSMSV |
For RLS and
DFSMStvs, the IDAQUIES, IDARETLK TYPE=SS,
IDARECOV TYPE=LL, or IDARECOV TYPE=NONRLS request failed because the
specified sphere is not an SMS VSAM data set. |
176(X'B0') |
RPLACBBD |
For RLS and DFSMStvs, the shared-latch obtain
failed for the Record Management request. Or the ACB specified in
the record management request or in the IDARETLK TYPE=SS, IDARECOV
TYPE=LL, or IDARECOV TYPE=NONRLS request is not a valid ACB open for
RLS or DFSMStvs. |
180(X'B4') |
|
For RLS, an invalid
request for a nonrecoverable
data set. |
181(X'B5') |
RPLQRACF |
This IDAQUIES
request is rejected because the
requestor does not have update authority to the sphere. Issued for
the following: - This is a type QUICLOSE request. Successful
completion of the
request results in a catalog update to mark the sphere quiesced. Because
the requestor does not have update authority, the request is rejected.
- The catalog shows this sphere is quiesced. Successful completion
of the QUIOPEN request would result in an ICF update to reset the
quiesced state of the sphere. Because the requestor does not have
update authority, the request is rejected.
|
182(X'B6') |
RPLQINPR |
For RLS, the IDAQUIES request rejected because
an IDAQUIES is already in progress for this sphere. If an RPL message
area (address in RPLERMSA) of sufficient length (specified in RPLEMLEN)
is specified, the following information is returned: Offset Length Description
------ ------ -----------
0 1 Type of quiesce event already in progress for this sphere.
Quiesce type constants are defined in IFGQUIES macro.
|
183(X'B7') |
RPLMIGRA |
IDAQUIES request
rejected because data set is
migrated. . |
184(X'B8') |
RPLABEND |
For RLS, an
ABEND condition occurred while processing
this VSAM request. The VSAM RLS FRR (Functional Recovery Routine)
intercepted the failure and failed the VSAM request with this reason
code. |
185(X'B9') |
|
For RLS, the user
task was canceled while the
request was being processed. |
186(X'BA') |
RPLEOVER |
End of volume
initialization failed when DATASET
tried to extend. |
186(X'BA') |
RPLEOVER |
For RLS, end-of-volume
initialization failed when
DATASET tried to extend. |
187(X'BB') |
|
For RLS, an error
occurred with partial EOV processing. |
188(X'BC') |
RPLNO241 |
For RLS, the storage in subpool 241 is not available. |
189(X'BD') |
|
For RLS, a lock for the VSAM
request required
space in the record table, which is full. You must modify the CFRM
policy and rebuild the lock structure. |
192(X'C0') |
RPLIRRNO |
Invalid relative record number. |
193(X'C1') |
RPLFLDMP |
An RLS request failed during a read I/O and a
dump was generated without terminating the VSAM server address space. |
196(X'C4') |
RPLRRADR |
An addressed request
was issued to a relative
record data set. |
200(X'C8') |
RPLPAACI |
Addressed
or control-interval access was attempted
through a path. |
201(X'C9') |
RPLDNOTF |
For RLS or
DFSMStvs, the IDARETLK TYPE=SS request
failed because the specified data set does not exist. |
204(X'CC') |
RPLPUTBK |
PUT-insert requests (or for RLS, IDALKADD requests)
are not allowed in backward mode. |
205(X'CD') |
|
- DFSMStvs
was unable to complete the request because DFSMStvs restarted
while the unit of recovery was inflight. To continue processing, the
application must issue a commit or a backout, then begin a new unit
of recovery.
- For LSR, invalid CONTOKEN.
|
206(X'CE') |
|
- For DFSMStvs, indicates that the request
was rejected because
the data set is quiesced or quiescing for copy. Retry the request.
- For applicaitons that do not use RLS or DFSMStvs, this is a validity
check error for share 3,4.
|
207(X'CF') |
|
For DFSMStvs, indicates that transactional processing
is currently unavailable because DFSMStvs is disabling or quiescing.
Close all data sets so the process can complete. |
208(X'D0') |
RPLINVEQ |
Invalid ENDREQ request. |
209(X'D1') |
|
- For DFSMStvs, indicates that the forward
recovery log is unavailable
because it is disabling.
- For LSR, indicates a cache structure
failure.
|
210(X'D2') |
|
- For DFSMStvs,
indicates that forward recovery logging failed because
the record length is greater than the installation maximum supported
by the log.
- For shared resources, the buffer is being invalidated,
or the
buffer use chain changing.
|
211(X'D3') |
|
- For DFSMStvs, indicates that a permanent
I/O error was detected
in the forward recovery log. For appropriate action, see the accompanying
DFSMStvs logger messages.
- For LSR, indicates that the cache
request was purged.
|
212(X'D4') |
RPLNOSPL |
Unable to
split index during a CA split. |
213(X'D5') |
|
- For DFSMStvs,
indicates that the undo log is unavailable for processing.
- For LSR, indicates no connectivity to the cache structure.
|
214(X'D6') |
|
For DFSMStvs, indicates
that a permanent I/O error
was detected in the undo log. For appropriate actions, see the accompanying
DFSMStvs logger messages. |
216(X'D8') |
|
For RLS, the LUWID
specified in the RPL does not
exist for the subsystem name specified in the ACB. |
217(X'D9') |
|
DFSMStvs is unable to complete the request because
RRS, which had been available, went down and restarted. To continue
processing, the application must issue a commit or a backout and then
begin a new unit of recovery. |
218(X'DA') |
|
Unrecognizable return
code from SVC 109. |
220(X'DC') |
|
For DFSMStvs, this
reason code is no longer being
used. |
224(X'E0') |
RPLMOIB |
A MRKBFR request
was issued for an invalid buffer. |
228(X'E4') |
RPLINVMD |
A cross-memory
caller is not in supervisor state,
in SRB, in cross-memory mode, or callers of RPL does not specify SYN
processing. |
229(X'E5') |
RPLDELCH |
The record
length changed during decompression
processing. |
232(X'E8') |
RPLUPERR |
Cross-memory
mode caller did not post the ECB
in the UPAD exit routine. |
235(X'EB') |
RPLBMWER |
- If
the SMSVSAM server is not available, the IDAQUIES request fails
with R15=16.
- For RLS and DFSMStvs, this is an internal error.
|
236(X'EC') |
RPLINVSI |
Validity check
error from SVC 109 for share options
3 or 4. |
240(X'F0') |
RPLUSTAT |
Buffer pool
status is unknown. The buffer use
chain may be changing or a buffer is being modified or invalidated.
Reissue the request. |
244(X'F4') |
RPLSVR14 |
Register 14
stack size is not large enough. |
245(X'F5') |
RPLCMSCE |
Severe error
returned from CMS for a compress
call. |
246(X'F6') |
RPLCMSDE |
Severe error
returned from CMS for a decompress
call. |
247(X'F7') |
|
Error in the last
active record number (DFM). |
248(X'F8') |
RPLRST14 |
Register 14
return offset is negative. |
249(X'F9') |
|
- For DFSMStvs,
indicates that undo logging failed because the record
length is greater than the installation maximum supported by the log.
- For LSR XI, indicates an invalid vector token.
|
250(X'FA') |
RPLINVDT |
No valid directory
token exists. The data set
cannot be decompressed. |
251(X'FB') |
RPLINTER |
Internal
VSAM RLS error. |
252(X'FC') |
RPLER252 |
Record mode
access is not valid for a linear data
set. |
253(X'FD') |
RPLER253 |
Verify function
is not valid for a linear data
set. |
254(X'FE') |
RPLERQUS |
I⁄O activity
on the data set not quiesced before
issuing WTBFR TYPE=DS. |