EZD1794I

Explanation
 A local activation of a dynamic tunnel for protecting
traffic with the  characteristics given failed. 
 Additional
diagnostic messages with the same message instance number will be
issued to identify the impacted Security Association (SA). The message
instance number precedes the message number in the log output and
is used to group related messages from the IKE daemon.
 In the
message text:  proto_name 
The protocol of the traffic to be protected by the tunnel.
local_ip
The local IP address of the traffic to be protected by the tunnel.
local_selector_type and remote_selector_type 
The type of upper-layer selectors to be protected by the tunnel.
The selector type value N/A implies that a selector
type is not applicable.
local_selector 
The upper-layer selector of the local traffic to be protected
by the tunnel.  The selector value N/A implies that
a local selector is not applicable.
remote_ip
The remote IP address of the traffic to be protected by the tunnel.
remote_selector 
The upper-layer selector of the remote traffic to be protected
by the tunnel.   The selector value N/A implies that
a remote selector is not applicable.

System action
 The SA negotiation fails; IKE daemon processing
continues.

Operator response
 None.

System programmer response
 Review additional diagnostic messages
to determine the cause of the failure.   After resolving the problem,
attempt the tunnel activation again.

User response
 Not applicable.

Problem determination
 None.

Source
 z/OS® Communications
Server TCP/IP: IKE daemon

Module
 anchor_ureq.cpp

Routing code
 11

Descriptor code
 7

Automation
 This message is output to the syslog.

Example
  EZD1794I Local activation of a dynamic tunnel failed for UDP(17) traffic  between 1.2.0.1 port 2000 
         and 1.1.0.1 port 3000
EZD1794I Local activation of a dynamic tunnel failed  for IP(4)  traffic between 1.2.0.1 N/A N/A 
         and 1.1.0.1 N/A N/A