EZD1360I

Explanation
 The network security services (NSS) server cannot
connect to the specified port because the port is unavailable. The
port might be in use by another program, it might be reserved for
another program or NSS might not have the authority to access the
port.
 In the message text: portnumber
The TCP port to which the NSS server is trying to bind.

System action
 If this message is issued during server startup,
then the server does not start.  If this  message is issued during
a MODIFY REFRESH command, the refresh is rejected and the server 
continues to run using the configuration values that were in place
prior to the  refresh attempt.

Operator response
 Contact the system programmer.

System programmer response
 The network security services (NSS)
server must be running on a unique TCP port.  In the case of a conflict,
either the NSS server or the conflicting program must be reconfigured
to use a different TCP port.  If NSS does not have access to the port,
verify that the port is not reserved for another program and that
NSS has been granted sufficient authority to access the port. See
the information about the network security services
(NSS) server in z/OS Communications Server: IP Configuration
Reference for information about  the NSSD configuration
file. 

User response
 Not applicable.

Problem determination
 None.

Source
 z/OS® Communications
Server TCP/IP: Network Security Server

Module
 NssMainThread.cpp

Routing code
 10

Descriptor code
 12

Example
  EZD1360I TCP PORT 4503 IS CURRENTLY UNAVAILABLE TO THE NSS SERVER