ACTIVATE |
z/OS V2R1 |
New option: FORCE |
Channel path/PCIe function |
z/OS V1R13 |
New option: TEST |
Release update |
CHNGDUMP |
z/OS V2R1 |
New dump mode: REP (replace)New SDUMP keywords: - HCSAByASID
- HCSANoOwner
- HCSASysOwner
|
Release update |
CMDS |
z/OS V1R13 |
New option: FORCE |
Release update |
CONFIG |
z/OS V2R1 |
New option: - ONLINE and OFFLINE parameters validate and bring resources online
and offline.
|
Release update |
CONTROL |
z/OS V2R1 |
Updated statement for the CONTROL V,USE command:- You cannot change the operating mode for HMCS, SMCS, or extended
MCS consoles.
|
Release update |
DISPLAY |
z/OS V2R1 |
New commands and options: - The PIPES option was updated to include display summary about z/OS UNIX pipe
usage. ALL displays all UIDs with a pipe create count.
- The CONSOLES option displays the new HMCS console.
- For GRS, the SYSTEM option is added.
- The GTZ option is added, which displays Generic Tracker.
- The HIS option is added, which displays hardware event data.
- For IOS, the HYPERWRITE option
is added to enable or disable IBM® zHyperWrite
data replication.
- The DISPLAY HS,CONFIG command
has a new NAME parameter to specify a configuration name for HyperSwap®.
- The IQP option is added, which display IQP information.
- The PCIE option is added, which display PCIe device information.
- The PPT option is added to display program properties table (PPT)
information.
- The TRACKDIRLOAD parameter is added to DISPLAY,PROG to display
the status of the TRACKDIRLOAD option.
- For SLIP, the PER parameter is added to display status of PER
traps. For SMS, the PDSE VSTOR parameter is added to display PDSE
virtual storage usage.
Deleted commands: - DISPLAY OPDATA,TRACKING
- SETCON TRACKING
- SET CNIDTR
|
Release update and
APARs: - OA44240
- OA45662
|
z/OS V1R13 |
New options: - DISPLAY MSGFLD supports the MSGRATE[,m] option.
- DISPLAY GRS supports the CONTENTION option.
- DISPLAY SMS supports SMSMOD and SMSVSAM,QUIESCE options.
- DISPLAY VIRTSTOR supports LFAREA option.
- DISPLAY XCF supports CONNECT and SERVERS options.
|
Release update |
DUMP |
z/OS V2R1 |
New SDATA options:
|
Release update |
DUMPDS |
z/OS V2R1 |
New options for dump data set allocation:
|
Release update |
FORCE |
z/OS V2R1 |
New option: - The TCB option is added for TCB address support.
|
Release update |
MODIFY |
z/OS V2R1 |
New option: - Hardware event data collection support is added.
|
Release update |
RESET |
z/OS V2R1 |
New options: - HMCS console options are added to support the new HMCS console.
|
Release update |
SET |
z/OS V2R1 |
New option: - Generic Tracker (GTZ) parameters are added to support GTZ parmlib
members.
- IQP parameter is added.
|
Release update |
SET |
z/OS V1R13 |
|
Release update |
SETALLOC |
z/OS V2R1 |
New option: - The UNITAFF option is added to specify SYSTEMDEFAULT.
|
Release update |
z/OS V1R13 |
New option: LOGTRACK |
Release update |
SETCEE |
z/OS V2R1 |
New option: - Specifies a Language Environment® runtime option.
|
Release update |
SETCON |
z/OS V2R1 |
New option: - Specifies new HMCS console options.
|
Release update |
SETGRS |
z/OS V2R1 |
New parameter: A new MONITOR parameter that
indicates whether to write SMF 87 monitoring records.
|
Release update |
SETGTZ |
z/OS V2R1 |
New command: Use this command for Generic
Tracker settings.
|
Release update |
SETSMS |
z/OS V2R1 |
|
Release update |
SETHS |
z/OS V2R1 |
New options: - Specifies security for console authority support.
- The SETHS SWAP command has a
new NAME parameter to specify a configuration name for HyperSwap.
|
Release update and APAR OA44240 |
SETIOS |
z/OS V2R1 |
New option: The RECOVERY,DCCF parameter supports
MESSAGE and WAIT_STATE options.
New
parameter: The HYPERWRITE parameter enables or disables IBM zHyperWrite data replication.
|
Release update and APAR OA45662 |
z/OS V1R13 |
Guidance: - Supports recovery for a channel path at the CU or device level.
|
Release update |
SETLOAD |
z/OS V2R1 |
New option: - The IEASM option supports static system symbol definitions.
|
Release update |
SETLOGR |
z/OS V2R1 |
New option: - The TRACE CT and DISPLAY LOGGER options support SAF authority.
|
Release update |
SETLOGR |
z/OS V1R13 |
New commands: - CTRACE command
- MONITOR command
|
New function |
SETOMVS |
z/OS V2R1 |
New option: - The AUTOCVT and MAXIOBUFUSER options provide Unicode Services
updates.
|
Release update |
z/OS V1R13 |
New options: - LOSTMSG
- MAXUSERMOUNTSYS
- MAXUSERMOUNTUSER
- NONEMPTYMOUNTPT
|
Release update |
SETPROG |
z/OS V2R1 |
New option: - The TRACKDIRLOAD option enables tracking of directed load modules.
|
Release update |
SETPROG |
z/OS V1R13 |
New guidance:
|
Release update |
SETSMS |
z/OS V2R1 |
New options: - HONOR_DSNTYPE_PDSE
can specify that a partitioned data set be created regardless of the
values for other data set attributes, such as data set organization
or directory blocks.
- PDSE_SYSEVENT_DONTSWAP specifies that a task in the SMSPDSE or
SMSPDSE1 address space must be prevented from getting swapped out
while its holding internal PDSE latches or locks.
- SUPPRESS_SMSMSG specifies whether SMS suppresses IGD17054I, IGD17227I,
or IGD17395I messages.
|
Release updates |
z/OS V1R13 |
New option: - New SUPPRESS_DRMSGS option to specify whether SMS suppresses
DELETE/RENAME messages that are issued to the hardcopy log and job
log.
|
Release update |
SETUNI |
z/OS V2R1 |
New options: - New Unicode 6.0 options support the new Unicode standard 6.0.
|
Release update |
SETXCF |
z/OS V2R1 |
New option: - The STOP REBUILD parameter is updated to stop structure duplexing.
|
Release update |
SLIP |
z/OS V2R1 |
New options: - For security FACILITY class entity IEASLIP.REFRESH, UPDATE access
is added.
- For SDATA; HCSAByASID, HCSANoOwner,
and HCSASysOwner
|
Release update |
START |
z/OS V2R1 |
New option: - The LLA option is added to specify the CSVLLAnn parmlib
member.
- Consider not using the SYSTEM or SYSAFF keywords.
|
Release update |
TRACE |
z/OS V2R1 |
New option: - A SYSTRACE_MODE check is added to ensure that your installation
does not run with MODE=ON for longer than appropriate.
|
Release update |
VARY |
z/OS V2R1 |
New option and parameter: - With the SPACE option, you can update space statistics in the
ACDS for a pool storage group or a DASD volume.
- The STANDBY parameter is added for the HMCS console.
|
Release update |