Activation steps
- On the Primary Task Selection panel, select Activate
or process configuration data and from the resulting panel, select Activate switch configuration. The Activate Switch
Configuration panel is displayed.
*------------- Activate Switch Configuration -------------------------------*
| |
| Specify the following values, and select how to handle an existing ESCON |
| Manager lock. |
| |
| IODF name . . . . . . . . : 'BPAN.IODF01' |
| |
| Switch ID . . . . . . . . . ____+ |
| Switch configuration ID . . BASIC + |
| |
| ESCON Manager lock . . 1 1. Break another user's ESCON Manager lock |
| 2. Preserve another user's ESCON Manager lock |
| |
*---------------------------------------------------------------------------*
- You may choose between two different kinds of switch activation:
Single switch activation
For single switch activation, use the Activate Switch Configuration panel
to:
- Specify the switch ID and the switch configuration ID that is to be written
to the switch.
- Select how to handle an existing ESCON Manager lock if it is in use by
another user.
I/O Operations
uses a locking mechanism to serialize connectivity changes across multiple
users and systems. This lock allows only one user (or program) to control
I/O Operations command processing at a time. If more than one user at your
installation is given the ability to enter I/O Operations commands, they must
synchronize their usage of I/O Operations to avoid delays or contention for
I/O Operations resources.
Multiple switch activation
For multiple switch activation, use the Activate Switch Configuration panel
to:
- Specify only the switch configuration ID and no Switch ID. A panel is
displayed showing all switches that have a configuration under the specified
name.
*------------------------- Switch Activation List -------------------------*
| Row 1 of 2 |
| Command ===> ________________________________________ Scroll ===> PAGE |
| |
| Select one or more switches for activation. |
| |
| Switch configuration ID . . : BASIC |
| |
| CU Dev |
| / ID Type Description Num. Num. More? |
| _ 98 9033 First switch 0098 0098 |
| _ 99 9033 Second switch 0099 0099 |
| **************************** Bottom of data **************************** |
| |
*--------------------------------------------------------------------------*
Switches that are not connected to any switch device are marked
with a disabled marker # in the action column, and cannot be selected
for activation. The panel shows 'YES' in the 'More?' column if there are more
than one control unit and one device. If there is only one control unit and
one device, the 'More?' column is left blank. HCD uses the switch devices
that are connected to the active system.
- Select the switches that will be activated simultaneously.
When you
have finished your selection, press the Enter key. A confirm panel is displayed.
On this panel you have to confirm if you want the active switch configuration
of all switches shown in the list to be updated.
Note:
In case
a switch activation fails, no switch will be activated, the rule is "none
or all".
For activating switch configuration data, refer
to IBM Tivoli System Automation for z/OS Planning and InstallationIBM Tivoli System Automation for z/OS Planning and Installation.
|